- 07 Jan, 2009 40 commits
-
-
Mike Frysinger authored
Signed-off-by:
Mike Frysinger <vapier.adi@gmail.com> Signed-off-by:
Bryan Wu <cooloney@kernel.org>
-
Mike Frysinger authored
cannot simply OR the ndsize ... need to clear out the old value first Signed-off-by:
-
Mike Frysinger authored
Signed-off-by:
-
Bernd Schmidt authored
Michael says that some bugs are crashes in tcp_v4_send_reset. There's a missing clobber of "CC" in our checksum assembly statement; fixing this makes the generated code look much saner. Signed-off-by:
Bernd Schmidt <bernds_cb1@t-online.de> Signed-off-by:
-
Mike Frysinger authored
push cache flushing up to dma_memcpy() so that we call the flush functions just once Signed-off-by:
-
Mike Frysinger authored
Signed-off-by:
-
Mike Frysinger authored
Signed-off-by:
-
Mike Frysinger authored
move most dma functions into static inlines since they are vastly 1 liners that get/set a value in a structure Signed-off-by:
-
Mike Frysinger authored
Signed-off-by:
-
Mike Frysinger authored
set_dma_callback: do not store .irq if request_irq() failed so we dont turn around and attempt to free_irq() it later on in free_dma() Signed-off-by:
-
Mike Frysinger authored
the irq member already serves the same purpose Signed-off-by:
-
Mike Frysinger authored
Signed-off-by:
-
Mike Frysinger authored
Signed-off-by:
-
Mike Frysinger authored
Signed-off-by:
-
Mike Frysinger authored
- unify all dma in/out functions (takes ~35 lines of code now) - unify dma_memcpy with dma in/out functions (1 place that touches MDMA0 registers) - add support for 32bit transfers - cleanup dma_memcpy code to be much more readable - irqs are disabled only while programming MDMA registers rather than the entire transaction Signed-off-by:
-
Mike Frysinger authored
Check pointers in safe_dma_memcpy as this is the entry point for user-space code Signed-off-by:
-
Mike Frysinger authored
Signed-off-by:
-
Michael Hennerich authored
Add BF537-STAMP platform Support Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
-
Mike Frysinger authored
Signed-off-by:
-
Robin Getz authored
Signed-off-by:
Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by:
-
Mike Frysinger authored
All slaves I'm aware of should support at least 100kHz Signed-off-by:
-
Mike Frysinger authored
Signed-off-by:
-
Michael Hennerich authored
This device shouldn't be considered as an alternative to a Memory Mapped or built-in Ethernet MAC. Throughput is slow (~460kByte/s) while generating a very high system load (~60%). Signed-off-by:
-
Mike Frysinger authored
Signed-off-by:
-
Yi Li authored
Turn to use the mmc_spi driver in mainline kernel. Signed-off-by:
Yi Li <yi.li@analog.com> Signed-off-by:
-
Yi Li authored
Signed-off-by:
-
Mike Frysinger authored
Signed-off-by:
-
Michael Hennerich authored
Signed-off-by:
-
Sonic Zhang authored
Signed-off-by:
Sonic Zhang <sonic.zhang@analog.com> Signed-off-by:
-
Michael McTernan authored
Signed-off-by:
Michael McTernan <mmcternan@airvana.com> Signed-off-by:
-
Graf Yang authored
Signed-off-by:
Graf Yang <graf.yang@analog.com> Signed-off-by:
-
Graf Yang authored
1. Use inline get_l1_... functions instead of macro 2. Fix compile issue about smp barrier functions Signed-off-by:
-
Graf Yang authored
Signed-off-by:
-
Bernd Schmidt authored
Fix a few problems I discovered when building a kernel with upstream CVS binutils. We have to add the NOTES macro to our linker script, since a kernel built with --build-id is otherwise unable to boot. Last time NOTES was added, it broke things, but the definition of the macro has changed not to rely on parts of the linker script that aren't present on Blackfin. I also noticed that _l2_lma_start does not point into the kernel image, but rather somewhere in L1/L2 space, which seems unintended. Also, when the L2 section was added to the linker script, the part following it which computes then length of the init section was not updated. Signed-off-by:
-
Graf Yang authored
Add document about bfin-gpio when requesting a pin both as gpio and gpio interrupt. Signed-off-by:
-
Bernd Schmidt authored
Remove all traces of the relocation stack. It's been removed from binutils for years now. Add a sanity overflow check to pcrel24 relocations to catch modules that were built without -mlong-calls. Signed-off-by:
-
Mike Frysinger authored
Tweak the BUG_ON() check to allow for equal values since the way pos is handled ... it is always indexed and post incremented Signed-off-by:
-
Michael Hennerich authored
Signed-off-by:
-
Mike Frysinger authored
use scm changelog rather than comment blocks in files Signed-off-by:
-
Mike Frysinger authored
Signed-off-by:
-
