- 28 May, 2006 6 commits
-
-
Ralph Wuerthner authored
Signed-off-by:
Ralph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by:
Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Ralph Wuerthner authored
Replace hex dump of bit error threshold data by log message showing bit error threshold data human readable. Signed-off-by:
-
Andreas Herrmann authored
Removed some macros, struct members and typedefs which were unused or not necessary. Signed-off-by:
-
Andreas Herrmann authored
Replace kmalloc/memset by kzalloc or kcalloc. Signed-off-by:
-
Andreas Herrmann authored
Removed some useless comments. Signed-off-by:
-
Andreas Herrmann authored
Copyright update, shortened file headers, shortened author information. Signed-off-by:
-
- 20 May, 2006 28 commits
-
-
Randy Dunlap authored
Relax the lowmem bounce buffer requirement for imm so that any low memory page will do -- they don't need to be below the ISA 16 MB limit, just need to be mapped in low memory. Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by:
-
Andrew Vasquez authored
Semantic changes in ISP24xx firmware behaviour inadvertently caused the driver to believe an F-port topology was present in an N_port-to-N_port configuration. Signed-off-by:
-
Andrew Vasquez authored
Simplify and centralise buffer allocation/deallocation, as there's no point in having two memory request methods. Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Andrew Vasquez authored
Expandind on the previous commit: commit 79f89a42 Author: andrew.vasquez@qlogic.com <andrew.vasquez@qlogic.com> Date: Fri Jan 13 17:05:58 2006 -0800 [SCSI] qla2xxx: Disable port-type RSCN handling via driver state-machine. and given: - the process-context requirements of the FC transport rport-APIs. - lack of port-type RSCN processing logic for ISP24xx and newer chips. it's time now to remove the state-machine logic from mainline. Signed-off-by:
-
Andrew Vasquez authored
- structure definitions. - structure members. - #define's. Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Andrew Vasquez authored
In qla2x00_reset_chip the driver first takes the hardware lock, and then later on takes the mbx lock. In the mailbox_command code.. it goes the other way around. Discovered with the lock validator. Cc: Ingo Molnar <mingo@elte.hu> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Andrew Vasquez authored
If firmware image is unavailable via request_firwmare(), then attempt to load the image (likely out-of-date) stored in flash memory. Signed-off-by:
-
Ravi Anand authored
With ISP24XX and ISP54XX parts. Signed-off-by:
-
Ravi Anand authored
Signed-off-by:
-
Ravi Anand authored
Signed-off-by:
-
Mike Christie authored
update version Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Mike Christie authored
Do not flush queues then block session. This will cause commands to needlessly swing around on us and remove goofy recovery_failed field and replace with state value. And do not start recovery from within the host reset function. This causeis too many problems becuase open-iscsi was desinged to call out to userspace then have userpscae decide if we should go into recovery or kill the session. Signed-off-by:
-
Mike Christie authored
Patch from david.somayajulu@qlogic.com and cleaned up by Tomo. qla4xxx is going to have a different daemon so this patch just routes the events to the right daemon. Signed-off-by:
-
Mike Christie authored
Discovered by steven@hayter.me.uk and patch by michaelc@cs.wisc.edu The dtask mempool is reserving 261120 items per session! Since we are now sending headers with sendmsg there is no reason for the mempool and that was causing us to us carzy amounts of mem. We can preallicate a header in the r2t and task struct and reuse them Signed-off-by:
-
Mike Christie authored
We only use the mtask data buffer for login tasks so we do not need to preallocate a buffer for every mtask. This saves 8 * 31 KB. Signed-off-by:
-
Mike Christie authored
From Zhen and ported by Mike: Don't use sendpage for the headers. sendpage for the pdu headers does not seem to have a performance impact, makes life harder for mutiple data pdus to be in flight and still trips up some network cards when it is from slab mem. Signed-off-by:
-
Jesper Juhl authored
The Coverity checker found a memory leak (bug nr. 1245) in drivers/block/DAC960.c::DAC960_V2_ProcessCompletedCommand() The leak is pretty unlikely since it requires that the first of two successive kmalloc() calls fail while the second one succeeds. But it can still happen even if it's unlikely. If the first call that allocates 'PhysicalDeviceInfo' fails but the one that allocates 'InquiryUnitSerialNumber' succeeds, then we will leak the memory allocated to 'InquiryUnitSerialNumber' when the variable goes out of scope. A simple fix for this is to change the existing code that frees 'PhysicalDeviceInfo' if that one was allocated but 'InquiryUnitSerialNumber' was not, into a check for either pointer being NULL and if so just free both. This is safe since kfree() can deal with being passed a NULL pointer and it avoids the leak. While I was there I also removed the casts of the kmalloc() return value since it's pointless. I also updated the driver version since this patch changes the workings of the code (however slightly). This issue could probably be fixed a lot more elegantly, but the code is a big mess IMHO and I just took the least intrusive route to a fix that I could find instead of starting on a cleanup as well (that can come later). Please consider for inclusion. Signed-off-by:
Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by:
-
Mark Haverkamp authored
Received From Mark Salyzyn The queue tracking is just not being used, not even for debugging. Information about outstanding commands can be acquired from the scsi structures. Signed-off-by:
Mark Haverkamp <markh@osdl.org> Signed-off-by:
-
Mark Haverkamp authored
Received From Mark Salyzyn A race condition existed that could result in a lost completion of a command to the ppc based cards. Signed-off-by:
-
Mark Haverkamp authored
Received From Mark Salyzyn Add the ability to adjust for unusual corner case failures. Both of these additional module parameters deal with embedded, non-intel or complicated system scenarios. Aif_timeout can be increased past the default 2 minute timeout to drop application registrations when a system has an unusually high event load resulting from continuing management requests, or simultaneous builds, or sluggish user space as a result of system load. Startup_timeout can be increased past the default 3 minute timeout to drop an adapter initialization for systems that have a very large number of targets, or slow to spin-up targets, or a complicated set of array configurations that extend the time for the firmware to declare that it is operational. This timeout would only have an affect on non-intel based systems, as the (more patient) BIOS would generally be where the startup delay would be dealt with. Signed-off-by:
-
Mark Haverkamp authored
Received From Mark Salyzyn Slight space and speed efficiency improvement. Signed-off-by:
-
Mark Haverkamp authored
Received From Mark Salyzyn Since new commands to the card are quiesced, respect the changes in the SCSI error path which dropped locking around the hba reset handler and similarly drop the lock requirement in the driver's path. Signed-off-by:
-
- 10 May, 2006 6 commits
-
-
James Bottomley authored
Problem spotted by: Suzuki K P <suzuki@in.ibm.com> A zero return on success isn't correct for filesystem write functions. They should either return negative error or the length of bytes consumed. Add code to convert our zero on success error return to return the length of bytes passed in. This fixes the following: $ echo "scsi remove-single-device 0 0 3 0" > /proc/scsi/scsi bash: echo: write error: No such device or address" Signed-off-by: -
Mike Christie authored
debugged by wrwhitehead@novell.com patch and analysis by fujita.tomonori@lab.ntt.co.jp Only tcp_read_sock and recv_actor (iscsi_tcp_data_recv for us) see desc.count. It is is used just for permitting tcp_read_sock to read the portion of data in the socket. When iscsi_tcp_data_recv sees a partial header, it sets desc.count. However, it is possible that the next skb (containing the rest of the header) still does not come. So I'm not sure that this scheme is completely correct. Ideally, we should use the exact length of the data in the socket for desc.count. However, it is not so simple (see SIOCINQ in tcp_ioctl). So I think that iscsi_tcp_data_recv can just stop playing with desc.count and tell tcp_read_sock to read the all skbs. As proposed already, if iscsi_tcp_data_ready sets desc.count to non-zero, tcp_read_sock does that. Signed-off-by:
-
Mike Christie authored
debugged by Ming and Rohan: The problem Ming and Rohan debugged was that during a normal session login, open-iscsi is not incrementing the exp_statsn counter. It was stuck at zero. From the RFC, it looks like if the login response PDU has a successful status then we should be incrementing that value. Also from the RFC, it looks like if when we drop a connection then reconnect, we should be using the exp_statsn from the old connection in the next relogin attempt. Signed-off-by:
-
Or Gerlitz authored
align printk output Signed-off-by:
Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by:
-
Mike Christie authored
from patmans@us.ibm.com and michaelc@cs.wisc.edu Fix bugs when forcing a mgmt task to fail and allow session recovery to cleanup the session/connection of any running mgmt tasks. When called during the in login state. Signed-off-by:
-
Or Gerlitz authored
add transport end point callbacks so iscsi drivers that cannot connect from userspace, like iscsi tcp, using sockets do not have to implement their own socket infrastructure. Signed-off-by:
-
