An error occurred fetching the project authors.
- 12 Dec, 2006 14 commits
-
-
Jean Delvare authored
The lowest 3 bits are ignored, and the chip decodes all 8 addresses, not only the 2 it needs. Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Jean Delvare authored
Fans can be hotplugged, so we should create sysfs file even for fans which are disabled at driver load time. Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Jean Delvare authored
Add support for the Fintek F71872F/FG Super-I/O chip. It is basically the same as the Fintek F71805F/FG as far as hardware monitoring is concerned, with two additional internal voltages monitored (VSB and battery), and 6 VID inputs (not yet supported.) To make things a bit more confusing, two of the voltage input pins (in4 and in8) can be used for other functions. The driver reads the pin configuration from the Super-I/O configuration space to decide whether it must create interface files for these inputs or not. Many thanks to Nikolay Derkach for testing the early iterations of this code and reporting bugs. Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Jean Delvare authored
This is a new hardware monitoring driver for the National Semiconductor PC87427 Super-I/O chip. It only supports fan speed monitoring for now, while the chip can do much more. Thanks to Amir Habibi at Candelis for setting up a test system, and to Michael Kress for testing several iterations of this driver. Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Jean Delvare authored
This interface was useless as the LPC ISA-like interface is always available, is faster, and is more reliable. This cuts the driver size by some 20%. This change is also required to later convert the it87 driver to a platform driver, so that we can get rid of i2c-isa in a near future. Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Stephan Berberig authored
Remove the strange DMI for the R52 (1846AQG) and add a note to update to latest BIOS in the Kconfig and source code. Signed-off-by: Stephan Berberig <s.berberig@arcor.de> Signed-off-by: Robert Love <rlove@rlove.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Jean Delvare authored
Move the DMI detection data from .text to .data. We really don't want that amount of data on the stack. Also refactor the macros used to generate the detection data, the vendor becomes a parameter. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Robert Love <rlove@rlove.org>
-
Jim Cromie authored
pc87360 currently hardcodes vrm = 90 (2.4 vintage). Update it to use newer code in hwmon-vid which reads cpuid to determine the correct vid. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Jean Delvare authored
Document the different fan control methods, list their options, and give some hints for best results. Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Jean Delvare authored
In "speed mode", the user specifies a target fan speed (in RPM) and the chip automatically adjusts the PWM duty cycle (or DC output level) to reach this target. Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Jean Delvare authored
In DC mode, the pwmN_freq files are not created. Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Jean Delvare authored
Different frequencies can give better results depending on the exact fan model used. Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Jean Delvare authored
pwmN files are writable only in manual fan speed control mode. In automatic fan speed control modes, they are read-only and report the duty cycle chosen by the chip. Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Jean Delvare authored
So far we were only extracting the fan skip bit from the fan control registers, but we'll soon need more bits so better store the whole register values. Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
- 09 Dec, 2006 26 commits
-
-
git://one.firstfloor.org/home/andi/git/linux-2.6Linus Torvalds authored
* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: [PATCH] x86-64: no paravirt for X86_VOYAGER or X86_VISWS [PATCH] i386: Fix io_apic.c warning [PATCH] i386: export smp_num_siblings for oprofile [PATCH] x86: Work around gcc 4.2 over aggressive optimizer [PATCH] x86: Fix boot hang due to nmi watchdog init code [PATCH] x86: Fix verify_quirk_intel_irqbalance() [PATCH] i386: Update defconfig [PATCH] x86-64: Update defconfig
-
Randy Dunlap authored
Since Voyager and Visual WS already define ARCH_SETUP, it looks like PARAVIRT shouldn't be offered for them. In file included from arch/i386/kernel/setup.c:63: include/asm-i386/mach-visws/setup_arch.h:8:1: warning: "ARCH_SETUP" redefin= ed In file included from include/asm/msr.h:5, from include/asm/processor.h:17, from include/asm/thread_info.h:16, from include/linux/thread_info.h:21, from include/linux/preempt.h:9, from include/linux/spinlock.h:49, from include/linux/capability.h:45, from include/linux/sched.h:46, from arch/i386/kernel/setup.c:26: include/asm/paravirt.h:163:1: warning: this is the location of the previous= definition In file included from arch/i386/kernel/setup.c:63: include/asm-i386/mach-visws/setup_arch.h:8:1: warning: "ARCH_SETUP" redefin= ed In file included from include/asm/msr.h:5, from include/asm/processor.h:17, from include/asm/thread_info.h:16, from include/linux/thread_info.h:21, from include/linux/preempt.h:9, from include/linux/spinlock.h:49, from include/linux/capability.h:45, from include/linux/sched.h:46, from arch/i386/kernel/setup.c:26: include/asm/paravirt.h:163:1: warning: this is the location of the previous= definition Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
-
Andi Kleen authored
gcc 4.2 warns linux/arch/i386/kernel/io_apic.c: In function ‘create_irq’: linux/arch/i386/kernel/io_apic.c:2488: warning: ‘vector’ may be used uninitialized in this function The warning is false, but somewhat legitimate so work around it. Signed-off-by: Andi Kleen <ak@suse.de>
-
Randy Dunlap authored
oprofile uses smp_num_siblings without testing for CONFIG_X86_HT. I looked at modifying oprofile, but this way is cleaner & simpler and I didn't see a good reason not to just export it when CONFIG_SMP. WARNING: "smp_num_siblings" [arch/i386/oprofile/oprofile.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andi Kleen <ak@suse.de>
-
Andi Kleen authored
The new PDA code uses a dummy _proxy_pda variable to describe memory references to the PDA. It is never referenced in inline assembly, but exists as input/output arguments. gcc 4.2 in some cases can CSE references to this which causes unresolved symbols. Define it to zero to avoid this. Signed-off-by: Andi Kleen <ak@suse.de>
-
Ravikiran G Thirumalai authored
2.6.19 stopped booting (or booted based on build/config) on our x86_64 systems due to a bug introduced in 2.6.19. check_nmi_watchdog schedules an IPI on all cpus to busy wait on a flag, but fails to set the busywait flag if NMI functionality is disabled. This causes the secondary cpus to spin in an endless loop, causing the kernel bootup to hang. Depending upon the build, the busywait flag got overwritten (stack variable) and caused the kernel to bootup on certain builds. Following patch fixes the bug by setting the busywait flag before returning from check_nmi_watchdog. I guess using a stack variable is not good here as the calling function could potentially return while the busy wait loop is still spinning on the flag. AK: I redid the patch significantly to be cleaner Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Shai Fultheim <shai@scalex86.org> Signed-off-by: Andi Kleen <ak@suse.de>
-
Andi Kleen authored
Fix verify_quirk_intel_irqbalance(). genapic checks should really happen only on affected versions of the E7520/E7320/E7525 based platforms. AK: This should akpm's Coyote SDV Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Andi Kleen <ak@suse.de>
-
Andi Kleen authored
Signed-off-by: Andi Kleen <ak@suse.de>
-
Andi Kleen authored
Signed-off-by: Andi Kleen <ak@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6Linus Torvalds authored
* 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (21 commits) Fix http://bugzilla.kernel.org/show_bug.cgi?id=7606 drm: add flag for mapping PCI DMA buffers read-only. drm: fix up irqflags in drm_lock.c drm: i915 updates drm: i915: fix up irqflags arg drm: i915: Only return EBUSY after we've established we need to schedule a new swap. drm: i915: Fix 'sequence has passed' condition in i915_vblank_swap(). drm: i915: Add SAREA fileds for determining which pipe to sync window buffer swaps to. drm: Make handling of dev_priv->vblank_pipe more robust. drm: DRM_I915_VBLANK_SWAP ioctl: Take drm_vblank_seq_type_t instead drm: i915: Add ioctl for scheduling buffer swaps at vertical blanks. drm: Core vsync: Don't clobber target sequence number when scheduling signal. drm: Core vsync: Add flag DRM_VBLANK_NEXTONMISS. drm: Make locked tasklet handling more robust. drm: drm_rmdraw: Declare id and idx as signed so testing for < 0 works as intended. drm: Change first valid DRM drawable ID to be 1 instead of 0. drm: drawable locking + memory management fixes + copyright drm: Add support for interrupt triggered driver callback with lock held to DRM core. drm: Add support for tracking drawable information to core drm: add support for secondary vertical blank interrupt to i915 ...
-
David Howells authored
Use direct assignment rather than cmpxchg() as the latter is unavailable and unimplementable on some platforms and is actually unnecessary. The use of cmpxchg() was to guard against two possibilities, neither of which can actually occur: (1) The pending flag may have been unset or may be cleared. However, given where it's called, the pending flag is _always_ set. I don't think it can be unset whilst we're in set_wq_data(). Once the work is enqueued to be actually run, the only way off the queue is for it to be actually run. If it's a delayed work item, then the bit can't be cleared by the timer because we haven't started the timer yet. Also, the pending bit can't be cleared by cancelling the delayed work _until_ the work item has had its timer started. (2) The workqueue pointer might change. This can only happen in two cases: (a) The work item has just been queued to actually run, and so we're protected by the appropriate workqueue spinlock. (b) A delayed work item is being queued, and so the timer hasn't been started yet, and so no one else knows about the work item or can access it (the pending bit protects us). Besides, set_wq_data() _sets_ the workqueue pointer unconditionally, so it can be assigned instead. So, replacing the set_wq_data() with a straight assignment would be okay in most cases. The problem is where we end up tangling with test_and_set_bit() emulated using spinlocks, and even then it's not a problem _provided_ test_and_set_bit() doesn't attempt to modify the word if the bit was set. If that's a problem, then a bitops-proofed assignment will be required - equivalent to atomic_set() vs other atomic_xxx() ops. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Kars de Jong authored
Amiga PCMCIA NE2000 Ethernet: Add missing initialization of dev->irq Signed-off-by: Kars de Jong <jongk@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Geert Uytterhoeven authored
Remove bogus comments about unexporting cache_{push,clear}(), as inline dma_cache_maintenance() (used by at least bionet and pamsnet) calls them. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Michael Schmitz authored
Atari IDE: The interrupt needs SA_SHIRQ now to get registered. Signed-off-by: Michael Schmitz <schmitz@biophys.uni-duesseldorf.de> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Sam Creasey authored
Make sun3 scsi drivers compile/work again (though with way too many warnings...) Tested on 3/50, 3/60. Signed-off-by: Sam Creasey <sammy@sammy.net> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Sam Creasey authored
General compile fixes for 2.6.16 for sun3, and some updates to make the new bootloader work correctly. Tested on 3/50, 3/60, 3/80. Signed-off-by: Sam Creasey <sammy@sammy.net> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Kars de Jong authored
- 7990: request_irq() should have SA_SHIRQ flag set - hplance_init() printed dev->name before register_netdev() had filled it in Signed-off-by: Kars de Jong <jongk@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NETLINK]: Put {IFA,IFLA}_{RTA,PAYLOAD} macros back for userspace. [NET_SCHED] sch_htb: turn intermediate classes into leaves [NET_SCHED] sch_cbq: deactivating when grafting, purging etc. [XFRM]: Fix XFRMGRP_REPORT to use correct multicast group. [NET]: Force a cache line split in hh_cache in SMP. [NETPOLL]: make arp replies through netpoll use mac address of sender [NETLINK]: Restore API compatibility of address and neighbour bits [AX.25]: Fix default address and broadcast address initialization. [AX.25]: Constify ax25 utility functions [BNX2]: Add an error check. [NET]: Convert hh_lock to seqlock.
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [PATCH] add STB810 support (Philips PNX8550-based) [MIPS] Qemu now has an ELF loader. [MIPS] Add GENERIC_HARDIRQS_NO__DO_IRQ for i8259 users [MIPS] Optimize csum_partial for 64bit kernel [MIPS] Optimize flow of csum_partial [MIPS] Make csum_partial more readable [MIPS] Rename SNI_RM200_PCI to just SNI_RM preparing for more RM machines
-
David S. Miller authored
GLIBC uses them etc. They are guarded by ifndef __KERNEL__ so nobody will start accidently using them in the kernel again, it's just for userspace. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jarek Poplawski authored
- turn intermediate classes into leaves again when their last child is deleted (struct htb_class changed) Signed-off-by: Jarek Poplawski <jarkao2@o2.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jarek Poplawski authored
- deactivating of active classes when q.qlen drops to zero (cbq_drop) - a redundant instruction removed from cbq_deactivate_class PS: probably htb_deactivate in htb_delete and cbq_deactivate_class in cbq_delete are also redundant now. Signed-off-by: Jarek Poplawski <jarkao2@o2.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
-
J Hadi Salim authored
XFRMGRP_REPORT uses 0x10 which is a group that belongs to events. The correct value is 0x20. We should really be using xfrm_nlgroups going forward; it was tempting to delete the definition of XFRMGRP_REPORT but it would break at least iproute2. Signed-off-by: J Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
hh_lock was converted from rwlock to seqlock by Stephen. To have a 100% benefit of this change, I suggest to place read mostly fields of hh_cache in a separate cache line, because hh_refcnt may be changed quite frequently on some busy machines. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Neil Horman authored
Back in 2.4 arp requests that were recevied by netpoll were processed in netconsole_receive_skb, where they were responded to using the src mac of the request sender. In the 2.6 kernel arp_reply is responsible for this function, but instead of using the src mac address of the incomming request, the stored mac address that was registered for the netconsole application is used. While this is usually ok, it can lead to failures in netpoll in some situations (specifically situations where a network may have two gateways, as arp requests from one may be responded to using the mac address of the other). This patch reverts the behavior to what we had in 2.4, in which all arp requests are sent back using the src address of the request sender. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Chris Lalancette <clalance@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Graf authored
Restore API compatibility due to bits moved from rtnetlink.h to separate headers. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-