- 08 Jul, 2020 40 commits
-
-
Krish Sadhukhan authored
According to section "Canonicalization and Consistency Checks" in APM vol. 2 the following guest state is illegal: "Any MBZ bit of CR3 is set." "Any MBZ bit of CR4 is set." Suggeted-by:Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Krish Sadhukhan <krish.sadhukhan@oracle.com> Message-Id: <1594168797-29444-3-git-send-email-krish.sadhukhan@oracle.com> Signed-off-by:
-
Paolo Bonzini authored
CR4.VMXE is reserved unless the VMX CPUID bit is set. On Intel, it is also tested by vmx_set_cr4, but AMD relies on kvm_valid_cr4, so fix it. Reviewed-by:
Jim Mattson <jmattson@google.com> Signed-off-by:
-
Krish Sadhukhan authored
Instead of creating the mask for guest CR4 reserved bits in kvm_valid_cr4(), do it in kvm_update_cpuid() so that it can be reused instead of creating it each time kvm_valid_cr4() is called. Suggested-by:
-
Jim Mattson authored
According to the SDM, when PAE paging would be in use following a MOV-to-CR0 that modifies any of CR0.CD, CR0.NW, or CR0.PG, then the PDPTEs are loaded from the address in CR3. Previously, kvm only loaded the PDPTEs when PAE paging would be in use following a MOV-to-CR0 that modified CR0.PG. Signed-off-by:
Oliver Upton <oupton@google.com> Reviewed-by:
Peter Shier <pshier@google.com> Message-Id: <20200707223630.336700-1-jmattson@google.com> Signed-off-by:
-
Zhenzhong Duan authored
Map "xen_nopvspin" to "nopvspin", fix stale description of "xen_nopvspin" as we use qspinlock now. Signed-off-by:
Zhenzhong Duan <zhenzhong.duan@oracle.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
-
Zhenzhong Duan authored
There are cases where a guest tries to switch spinlocks to bare metal behavior (e.g. by setting "xen_nopvspin" on XEN platform and "hv_nopvspin" on HYPER_V). That feature is missed on KVM, add a new parameter "nopvspin" to disable PV spinlocks for KVM guest. The new 'nopvspin' parameter will also replace Xen and Hyper-V specific parameters in future patches. Define variable nopvsin as global because it will be used in future patches as above. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Wanpeng Li <wanpengli@tencent.com> Cc: Jim Mattson <jmattson@google.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Signed-off-by:
-
Zhenzhong Duan authored
pr_*() is preferred than printk(KERN_* ...), after change all the print in arch/x86/kernel/kvm.c will have "kvm-guest: xxx" style. No functional change. Signed-off-by:
-
Zhenzhong Duan authored
This reverts commit 34226b6b. Commit 8990cac6 ("x86/jump_label: Initialize static branching early") adds jump_label_init() call in setup_arch() to make static keys initialized early, so we could use the original simpler code again. The similar change for XEN is in commit 090d54bc ("Revert "x86/paravirt: Set up the virt_spin_lock_key after static keys get initialized"") Signed-off-by:
-
Sean Christopherson authored
Rename KVM's accessor for retrieving a 'struct kvm_mmu_page' from the associated host physical address to better convey what the function is doing. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200622202034.15093-7-sean.j.christopherson@intel.com> Signed-off-by:
-
Sean Christopherson authored
Introduce sptep_to_sp() to reduce the boilerplate code needed to get the shadow page associated with a spte pointer, and to improve readability as it's not immediately obvious that "page_header" is a KVM-specific accessor for retrieving a shadow page. Signed-off-by:
-
Sean Christopherson authored
Make 'struct kvm_mmu_page' MMU-only, nothing outside of the MMU should be poking into the gory details of shadow pages. Signed-off-by:
-
Sean Christopherson authored
Add mmu/mmu_internal.h to hold declarations and definitions that need to be shared between various mmu/ files, but should not be used by anything outside of the MMU. Begin populating mmu_internal.h with declarations of the helpers used by page_track.c. Signed-off-by:
-
Sean Christopherson authored
Move kvm_mmu_available_pages() from mmu.h to mmu.c, it has a single caller and has no business being exposed via mmu.h. Signed-off-by:
-
Sean Christopherson authored
Move mmu_audit.c and mmutrace.h under mmu/ where they belong. Signed-off-by:
-
Sean Christopherson authored
Propagate any error returned by make_mmu_pages_available() out to userspace instead of resuming the guest if the error occurs while handling a page fault. Now that zapping the oldest MMU pages skips active roots, i.e. fails if and only if there are no zappable pages, there is no chance for a false positive, i.e. no chance of returning a spurious error to userspace. Signed-off-by:
-
Sean Christopherson authored
Use the recently introduced kvm_mmu_zap_oldest_mmu_pages() to batch zap MMU pages when shrinking a slab. This fixes a long standing issue where KVM's shrinker implementation is completely ineffective due to zapping only a single page. E.g. without batch zapping, forcing a scan via drop_caches basically has no impact on a VM with ~2k shadow pages. With batch zapping, the number of shadow pages can be reduced to a few hundred pages in one or two runs of drop_caches. Note, if the default batch size (currently 128) is problematic, e.g. zapping 128 pages holds mmu_lock for too long, KVM can bound the batch size by setting @batch in mmu_shrinker. Signed-off-by:
-
Sean Christopherson authored
Collect MMU pages for zapping in a loop when making MMU pages available, and skip over active roots when doing so as zapping an active root can never immediately free up a page. Batching the zapping avoids multiple remote TLB flushes and remedies the issue where the loop would bail early if an active root was encountered. Signed-off-by:
-
Sean Christopherson authored
Delete a shadow page from the invalidation list instead of throwing it back on the list of active pages when it's a root shadow page with active users. Invalid active root pages will be explicitly freed by mmu_free_root_page() when the root_count hits zero, i.e. they don't need to be put on the active list to avoid leakage. Use sp->role.invalid to detect that a shadow page has already been zapped, i.e. is not on a list. WARN if an invalid page is encountered when zapping pages, as it should now be impossible. Signed-off-by:
-
Sean Christopherson authored
Skip the unsync checks and the write flooding clearing for fully direct MMUs, which are guaranteed to not have unsync'd or indirect pages (write flooding detection only applies to indirect pages). For TDP, this avoids unnecessary memory reads and writes, and for the write flooding count will also avoid dirtying a cache line (unsync_child_bitmap itself consumes a cache line, i.e. write_flooding_count is guaranteed to be in a different cache line than parent_ptes). Signed-off-by:
Jon Cargille <jcargill@google.com> Signed-off-by:
-
Sean Christopherson authored
Refactor for_each_valid_sp() to take the list of shadow pages instead of retrieving it from a gfn to avoid doing the gfn->list hash and lookup multiple times during kvm_get_mmu_page(). Cc: Peter Feiner <pfeiner@google.com> Cc: Jon Cargille <jcargill@google.com> Cc: Jim Mattson <jmattson@google.com> Signed-off-by:
-
Uros Bizjak authored
Current minimum required version of binutils is 2.23, which supports VMCALL and VMMCALL instruction mnemonics. Replace the byte-wise specification of VMCALL and VMMCALL with these proper mnemonics. Signed-off-by:
Uros Bizjak <ubizjak@gmail.com> CC: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200623183439.5526-1-ubizjak@gmail.com> Signed-off-by:
-
Joerg Roedel authored
Match the naming with other nested svm functions. No functional changes. Signed-off-by:
Joerg Roedel <jroedel@suse.de> Message-Id: <20200625080325.28439-5-joro@8bytes.org> Signed-off-by:
-
Joerg Roedel authored
Make clear the symbols belong to the SVM code when they are built-in. No functional changes. Signed-off-by:
-
Joerg Roedel authored
Make it more clear what data structure these functions operate on. No functional changes. Signed-off-by:
-
Joerg Roedel authored
Renaming is only needed in the svm.h header file. No functional changes. Signed-off-by:
-
Sean Christopherson authored
Add nested_vmx_fail() to wrap VM-Fail paths that _may_ result in VM-Fail Valid to make it clear at the call sites that the Valid flavor isn't guaranteed. Suggested-by:
-
Jim Mattson authored
Since this field is now in kvm_vcpu_arch, clean things up a little by setting it in vendor-agnostic code: vcpu_enter_guest. Note that it must be set after the call to kvm_x86_ops.run(), since it can't be updated before pre_sev_run(). Suggested-by:
-
Jim Mattson authored
Both the vcpu_vmx structure and the vcpu_svm structure have a 'last_cpu' field. Move the common field into the kvm_vcpu_arch structure. For clarity, rename it to 'last_vmentry_cpu.' Suggested-by:
-
Jim Mattson authored
More often than not, a failed VM-entry in an x86 production environment is induced by a defective CPU. To help identify the bad hardware, include the id of the last logical CPU to run a vCPU in the information provided to userspace on a KVM exit for failed VM-entry or for KVM internal errors not associated with emulation. The presence of this additional information is indicated by a new capability, KVM_CAP_LAST_CPU. Signed-off-by:
-
Jim Mattson authored
As we already do in svm, record the last logical processor on which a vCPU has run, so that it can be communicated to userspace for potential hardware errors. Signed-off-by:
-
Jim Mattson authored
Previously, this field was only set when using SEV. Set it for all vCPU configurations, so that it can be communicated to userspace for diagnosing potential hardware errors. Signed-off-by:
-
Jim Mattson authored
The current logical processor id is cached in vcpu->cpu. Use it instead of raw_smp_processor_id() when a kvm_vcpu struct is available. Signed-off-by:
-
Paolo Bonzini authored
Callers of sev_pin_memory() treat NULL differently: sev_launch_secret()/svm_register_enc_region() return -ENOMEM sev_dbg_crypt() returns -EFAULT. Switching to ERR_PTR() preserves the error and enables cleaner reporting of different kinds of failures. Suggested-by:
-
John Hubbard authored
This code was using get_user_pages*(), in a "Case 2" scenario (DMA/RDMA), using the categorization from [1]. That means that it's time to convert the get_user_pages*() + put_page() calls to pin_user_pages*() + unpin_user_pages() calls. There is some helpful background in [2]: basically, this is a small part of fixing a long-standing disconnect between pinning pages, and file systems' use of those pages. [1] Documentation/core-api/pin_user_pages.rst [2] "Explicit pinning of user-space pages": https://lwn.net/Articles/807108/ Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Wanpeng Li <wanpengli@tencent.com> Cc: Jim Mattson <jmattson@google.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: x86@kernel.org Cc: kvm@vger.kernel.org Signed-off-by:John Hubbard <jhubbard@nvidia.com> Message-Id: <20200526062207.1360225-3-jhubbard@nvidia.com> Signed-off-by:
-
John Hubbard authored
There are two problems in svn_pin_memory(): 1) The return value of get_user_pages_fast() is stored in an unsigned long, although the declared return value is of type int. This will not cause any symptoms, but it is misleading. Fix this by changing the type of npinned to "int". 2) The number of pages passed into get_user_pages_fast() is stored in an unsigned long, even though get_user_pages_fast() accepts an int. This means that it is possible to silently overflow the number of pages. Fix this by adding a WARN_ON_ONCE() and an early error return. The npages variable is left as an unsigned long for convenience in checking for overflow. Fixes: 89c50580 ("KVM: SVM: Add support for KVM_SEV_LAUNCH_UPDATE_DATA command") Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Wanpeng Li <wanpengli@tencent.com> Cc: Jim Mattson <jmattson@google.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: x86@kernel.org Cc: kvm@vger.kernel.org Signed-off-by:
-
Krish Sadhukhan authored
According to section "Canonicalization and Consistency Checks" in APM vol. 2 the following guest state is illegal: "DR6[63:32] are not zero." "DR7[63:32] are not zero." "Any MBZ bit of EFER is set." Signed-off-by: -
Krish Sadhukhan authored
Signed-off-by:
-
Peter Xu authored
Logically the ignore_msrs and report_ignored_msrs should also apply to feature MSRs. Add them in. Signed-off-by:
Peter Xu <peterx@redhat.com> Message-Id: <20200622220442.21998-3-peterx@redhat.com> Signed-off-by:
-
Peter Xu authored
MSR accesses can be one of: (1) KVM internal access, (2) userspace access (e.g., via KVM_SET_MSRS ioctl), (3) guest access. The ignore_msrs was previously handled by kvm_get_msr_common() and kvm_set_msr_common(), which is the bottom of the msr access stack. It's working in most cases, however it could dump unwanted warning messages to dmesg even if kvm get/set the msrs internally when calling __kvm_set_msr() or __kvm_get_msr() (e.g. kvm_cpuid()). Ideally we only want to trap cases (2) or (3), but not (1) above. To achieve this, move the ignore_msrs handling upper until the callers of __kvm_get_msr() and __kvm_set_msr(). To identify the "msr missing" event, a new return value (KVM_MSR_RET_INVALID==2) is used for that. Signed-off-by:
-
Sean Christopherson authored
Move .write_log_dirty() into kvm_x86_nested_ops to help differentiate it from the non-nested dirty log hooks. And because it's a nested-only operation. Signed-off-by:
-
