- 07 Dec, 2010 40 commits
-
-
Javier Cardona authored
Wrap mesh sections inside CONFIG_MAC80211_MESH to fix compilation problems reported by Stephen Rothwell, Larry Finger and Bruno Randolf. Signed-off-by:John W. Linville <linville@tuxdriver.com>
-
Mohammed Shafi Shajakhan authored
The structure struct ieee80211_rx_status *rxs is no longer needed to be passed to ath_rx_send_to_mac80211 function Signed-off-by:
Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by:
-
Mohammed Shafi Shajakhan authored
With the current save power save implementation we assume a dtim period of 1.This value is assigned based on a sanity check in the driver eventhough we had not parsed it from mac80211.This patch obtains the actual DTIM period from AP by parsing it from mac80211.Yet for handling multicast traffic we may still have it as fixed rather than parsing it from mac80211 .This does not breaks power save or anything as the sleep duration is currently fixed in the driver.This patch may serve to improve power save in the future by using dtim period for sleep duration and using correct dtim period adhoc mode. Signed-off-by:
-
Mohammed Shafi Shajakhan authored
AUTOSLEEP feature is enabled only for AR9271 and AR9003 version chipsets.So unlikely macro should be used only to check whether auto-sleep feature is enabled Signed-off-by:
-
Sujith Manoharan authored
Use the correct error condition exit in case firmware download fails for some reason. Not doing so results in a panic: usb 1-3: ath9k_htc: Transferred FW: ar9271.fw, size: 51280 usb 1-3: ath9k_htc: Firmware - ar9271.fw download failed usb 1-3: ath9k_htc: Target is unresponsive Failed to initialize the device INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. Pid: 2823, comm: insmod Tainted: G W 2.6.37-rc4-wl #11 Call Trace: [<ffffffff81090d7e>] __lock_acquire+0xe3e/0x1d00 [<ffffffff813a9f14>] ? restore_args+0x0/0x30 [<ffffffff81058af1>] ? vprintk+0x321/0x500 [<ffffffff81092290>] lock_acquire+0xa0/0x190 [<ffffffffa02a0eac>] ? usb_kill_anchored_urbs+0x1c/0x80 [usbcore] [<ffffffff813a8ea8>] _raw_spin_lock_irq+0x48/0x60 [<ffffffffa02a0eac>] ? usb_kill_anchored_urbs+0x1c/0x80 [usbcore] [<ffffffff813a53fd>] ? printk+0x3c/0x3f [<ffffffffa02a0eac>] usb_kill_anchored_urbs+0x1c/0x80 [usbcore] [<ffffffffa0055388>] ath9k_hif_usb_dealloc_urbs+0x18/0x40 [ath9k_htc] [<ffffffffa00557d7>] ath9k_hif_usb_probe+0x227/0x3d0 [ath9k_htc] [<ffffffffa02a56ac>] usb_probe_interface+0x10c/0x210 [usbcore] [<ffffffff812ae826>] driver_probe_device+0x96/0x1c0 [<ffffffff812ae9f3>] __driver_attach+0xa3/0xb0 [<ffffffff812ae950>] ? __driver_attach+0x0/0xb0 [<ffffffff812ad6ae>] bus_for_each_dev+0x5e/0x90 [<ffffffff812ae4c9>] driver_attach+0x19/0x20 [<ffffffff812ae038>] bus_add_driver+0x168/0x320 [<ffffffff812aec71>] driver_register+0x71/0x140 [<ffffffff811fc338>] ? __raw_spin_lock_init+0x38/0x70 [<ffffffffa02a438c>] usb_register_driver+0xdc/0x190 [usbcore] [<ffffffffa0063000>] ? ath9k_htc_init+0x0/0x4f [ath9k_htc] [<ffffffffa005599e>] ath9k_hif_usb_init+0x1e/0x20 [ath9k_htc] [<ffffffffa006302b>] ath9k_htc_init+0x2b/0x4f [ath9k_htc] [<ffffffff8100212f>] do_one_initcall+0x3f/0x180 [<ffffffff8109ef9b>] sys_init_module+0xbb/0x200 [<ffffffff8100bf52>] system_call_fastpath+0x16/0x1b Signed-off-by:
Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by:
-
Sujith Manoharan authored
Signed-off-by:
-
Sujith Manoharan authored
ath.ko is a common module shared between ath5k, ar9170usb, ath9k and ath9k_htc. Adding driver specific data to the shared structure would impact all the drivers. Handling USB device recognition for devices specific to ath9k_htc can be handled within the driver itself. Also, AR7010 refers to the processor used in both AR9280/AR9287 based devices. Rename the device enumerations accordingly. While at it, check properly for the bus type when choosing the EEPROM base address for UB95. Signed-off-by:
-
Felix Fietkau authored
net/mac80211/mlme.c: In function 'ieee80211_sta_work': net/mac80211/mlme.c:1981: warning: too many arguments for format Introduced by commit 04ac3c0e ("mac80211: speed up AP probing using nullfunc frames"). Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
Bruno Randolf authored
One thing I missed in my WME series: Older hardware does not have enough hardware queues to support WME. In this case we just set up one data queue. Use the capability information to decide how many queues to set up. Signed-off-by:
Bruno Randolf <br1@einfach.org> Signed-off-by:
-
Ben Greear authored
This decreases spammage in the log. A single line message will still be printed, so users can be aware that problem exists. Signed-off-by:
Ben Greear <greearb@candelatech.com> Acked-by:
Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Right now it is done for only AR9485, will be done for ar9003 also after proper testing. Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Also spur channel count and range is different for AR9485. Signed-off-by:
-
Vasanthakumar Thiagarajan authored
This helper function would be used for AR9485. Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Have it in ah->caps. This will be used during various calibrations. Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Calibration data are stored at 4k address (0xfff). The cal data for AR9485 is not compressed so its lengh can exceed 1024 limit, take care of that. Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Also make it a supported mac Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
AR9485 is a single chain and single band (2.4 Ghz) chip. Signed-off-by:
-
John W. Linville authored
Since this is updated manually and sporadically, it is fairly useless anyway. Signed-off-by: -
Joe Perches authored
ar9300RateSize is not necessarily a power of 4. Change ar9003_hw_set_target_power_eeprom to print the targetPowerValT2 array one per line. ath9k_hw_ar9300_set_txpower repeated the output 4 times per line, change it to print the targetPowerValT2 value one per line. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
Remove ath/debug.h and the includes of these files. Coalesce long formats. Correct a few misspellings and missing "\n"s from these logging messages. Remove unnecessary trailing space before a newline. Remove ARRAY_SIZE casts, use printf type %zu Signed-off-by:
-
Joe Perches authored
So these errors are always emitted at KERN_ERR level. Remove ARRAY_SIZE casts, use printf type %zu Signed-off-by:
-
