Skip to content

L
linux
Switch branch/tag
  1. 13 Feb, 2017 2 commits
    • Shaohua Li's avatar
      raid5: only dispatch IO from raid5d for harddisk raid · 765d704d
      Shaohua Li authored 
      We made raid5 stripe handling multi-thread before. It works well for
SSD. But for harddisk, the multi-threading creates more disk seek, so
not always improve performance. For several hard disks based raid5,
multi-threading is required as raid5d becames a bottleneck especially
for sequential write.

To overcome the disk seek issue, we only dispatch IO from raid5d if the
array is harddisk based. Other threads can still handle stripes, but
can't dispatch IO.

Idealy, we should control IO dispatching order according to IO position
interrnally. Right now we still depend on block layer, which isn't very
efficient sometimes though.

My setup has 9 harddisks, each disk can do around 180M/s sequential
write. So in theory, the raid5 can do 180 * 8 = 1440M/s sequential
write. The test machine uses an ATOM CPU. I measure sequential write
with large iodepth bandwidth to raid array:

without patch: ~600M/s
without patch and group_thread_cnt=4: 750M/s
with patch and group_thread_cnt=4: 950M/s
with patch, group_thread_cnt=4, skip_copy=1: 1150M/s

We are pretty close to the maximum bandwidth in the large iodepth
iodepth case. The performance gap of small iodepth sequential write
between software raid and theory value is still very big though, because
we don't have an efficient pipeline.

Cc: NeilBrown <neilb@suse.com>
Cc: Song Liu <songliubraving@fb.com>
Signed-off-by: default avatarShaohua Li <shli@fb.com>
      765d704d
    • colyli@suse.de's avatar
      md linear: fix a race between linear_add() and linear_congested() · 03a9e24e
      colyli@suse.de authored 
      Recently I receive a bug report that on Linux v3.0 based kerenl, hot add
disk to a md linear device causes kernel crash at linear_congested(). From
the crash image analysis, I find in linear_congested(), mddev->raid_disks
contains value N, but conf->disks[] only has N-1 pointers available. Then
a NULL pointer deference crashes the kernel.

There is a race between linear_add() and linear_congested(), RCU stuffs
used in these two functions cannot avoid the race. Since Linuv v4.0
RCU code is replaced by introducing mddev_suspend().  After checking the
upstream code, it seems linear_congested() is not called in
generic_make_request() code patch, so mddev_suspend() cannot provent it
from being called. The possible race still exists.

Here I explain how the race still exists in current code.  For a machine
has many CPUs, on one CPU, linear_add() is called to add a hard disk to a
md linear device; at the same time on other CPU, linear_congested() is
called to detect whether this md linear device is congested before issuing
an I/O request onto it.

Now I use a possible code execution time sequence to demo how the possible
race happens,

seq    linear_add()                linear_congested()
 0                                 conf=mddev->private
 1   oldconf=mddev->private
 2   mddev->raid_disks++
 3                              for (i=0; i<mddev->raid_disks;i++)
 4                                bdev_get_queue(conf->disks[i].rdev->bdev)
 5   mddev->private=newconf

In linear_add() mddev->raid_disks is increased in time seq 2, and on
another CPU in linear_congested() the for-loop iterates conf->disks[i] by
the increased mddev->raid_disks in time seq 3,4. But conf with one more
element (which is a pointer to struct dev_info type) to conf->disks[] is
not updated yet, accessing its structure member in time seq 4 will cause a
NULL pointer deference fault.

To fix this race, there are 2 parts of modification in the patch,
 1) Add 'int raid_disks' in struct linear_conf, as a copy of
    mddev->raid_disks. It is initialized in linear_conf(), always being
    consistent with pointers number of 'struct dev_info disks[]'. When
    iterating conf->disks[] in linear_congested(), use conf->raid_disks to
    replace mddev->raid_disks in the for-loop, then NULL pointer deference
    will not happen again.
 2) RCU stuffs are back again, and use kfree_rcu() in linear_add() to
    free oldconf memory. Because oldconf may be referenced as mddev->private
    in linear_congested(), kfree_rcu() makes sure that its memory will not
    be released until no one uses it any more.
Also some code comments are added in this patch, to make this modification
to be easier understandable.

This patch can be applied for kernels since v4.0 after commit:
3be260cc ("md/linear: remove rcu protections in favour of
suspend/resume"). But this bug is reported on Linux v3.0 based kernel, for
people who maintain kernels before Linux v4.0, they need to do some back
back port to this patch.

Changelog:
 - V3: add 'int raid_disks' in struct linear_conf, and use kfree_rcu() to
       replace rcu_call() in linear_add().
 - v2: add RCU stuffs by suggestion from Shaohua and Neil.
 - v1: initial effort.
Signed-off-by: default avatarColy Li <colyli@suse.de>
Cc: Shaohua Li <shli@fb.com>
Cc: Neil Brown <neilb@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarShaohua Li <shli@fb.com>
      03a9e24e
  3. 12 Feb, 2017 1 commit
  5. 11 Feb, 2017 8 commits
  7. 10 Feb, 2017 25 commits
  9. 09 Feb, 2017 4 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7