- 17 Apr, 2019 6 commits
-
-
Chris Wilson authored
Sometimes the HW doesn't even play fair, and completely forgets about register writes. Skip verifying known troublemakers. References: https://bugs.freedesktop.org/show_bug.cgi?id=108954Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190417075657.19456-4-chris@chris-wilson.co.uk
-
Chris Wilson authored
Read the engine workarounds back using the GPU after loading the initial context state to verify that we are setting them correctly, and bail if it fails. v2: Break out the verification into its own loop Signed-off-by:
-
Chris Wilson authored
Immediately after writing the workaround, verify that it stuck in the register. References: https://bugs.freedesktop.org/show_bug.cgi?id=108954Signed-off-by:
-
Joonas Lahtinen authored
Signed-off-by:Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Jani Nikula authored
The cdclk init/uninit code was changed by commit 93a643f2 ("drm/i915/cdclk: have only one init/uninit function") between the versions of commit 39564ae8 ("drm/i915/ehl: Inherit Ice Lake conditional code"). What got merged fails to do cdclk init/uninit on ehl. Fixes: 39564ae8 ("drm/i915/ehl: Inherit Ice Lake conditional code") Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Bob Paauwe <bob.j.paauwe@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Bob Paauwe <bob.j.paauwe@intel.com> Reviewed-by:
José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190416082852.18141-1-jani.nikula@intel.com
-
Chris Wilson authored
SSEU reprogramming of the context introduced the notion of engine class and instance for a forwards compatible method of describing any engine beyond the old execbuf interface. We wish to adopt this class:instance description for more interfaces, so pull it out into a separate type for userspace convenience. Fixes: e46c2e99 ("drm/i915: Expose RPCS (SSEU) configuration to userspace (Gen11 only)") Signed-off-by:
Tony Ye <tony.ye@intel.com> Reviewed-by:
Andi Shyti <andi@etezian.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190412071416.30097-1-chris@chris-wilson.co.uk
-
- 16 Apr, 2019 11 commits
-
-
Paulo Zanoni authored
Make them take the uncore argument from the caller instead of passing the implicit &dev_priv->uncore directly. This will allow us to finally pass something that's not dev_priv->uncore in the future, and gets rid of the implicit variables in register macros. v2: Rebase on top of the newer patches. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v1) Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190410235344.31199-6-paulo.r.zanoni@intel.com
-
Paulo Zanoni authored
The IRQ initialization helpers are simple and self-contained. Continue the transition started in the recent uncore rework to get us rid of I915_READ/WRITE and the implicit dev_priv variables. While the implicit dev_priv is removed from the IRQ initialization helpers, we didn't get rid of them in the macro callers. Doing that should be very simple now. v2: Rebase on top of the new patches. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v1) Signed-off-by:
-
Paulo Zanoni authored
This discussion started because we use token pasting in the GEN{2,3}_IRQ_INIT and GEN{2,3}_IRQ_RESET macros, so gen2-4 passes an empty argument to those macros, making the code a little weird. The original proposal was to just add a comment as the empty argument, but Ville suggested we just add a prefix to the registers, and that indeed sounds like a more elegant solution. Now doing this is kinda against our rules for register naming since we only add gens or platform names as register prefixes when the given gen/platform changes a register that already existed before. On the other hand, we have so many instances of IIR/IMR in comments that adding a prefix would make the users of these register more easily findable, in addition to make our token pasting macros actually readable. So IMHO opening an exception here is worth it. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190410235344.31199-4-paulo.r.zanoni@intel.com
-
Paulo Zanoni authored
Like the gen3+ macros, the gen2 versions of the IRQ initialization macros take the register name in the 'type' argument. But gen2 only has one set of registers, so there's really no need to specify the type. This commit removes the type argument and uses the registers directly instead of passing them through variables. Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190410235344.31199-3-paulo.r.zanoni@intel.com
-
Paulo Zanoni authored
The whole point of having macros here is for the token pasting necessary to automatically have IMR, IIR and IER selected. We don't really need or want all the inlining that happens as a consequence. The good thing about the current code is that it works regardless of the relative offsets between these registers (they change after gen4, with the usual VLV/CHV exceptions). One thing which we can do is to split the logic of what we do with imr/ier/iir to functions separate from the macros that pick them. That's what we do in this commit. This allows us to get rid of the gen8 duplicates and also all the inlining: add/remove: 2/0 grow/shrink: 0/21 up/down: 384/-5949 (-5565) Function old new delta gen3_irq_reset - 233 +233 gen3_irq_init - 151 +151 i8xx_irq_postinstall 459 442 -17 gen11_irq_postinstall 804 744 -60 ironlake_irq_postinstall 450 353 -97 vlv_display_irq_postinstall 348 245 -103 i965_irq_postinstall 378 272 -106 i915_irq_postinstall 333 227 -106 gen8_irq_power_well_post_enable 374 240 -134 ironlake_irq_reset 397 218 -179 vlv_display_irq_reset 616 433 -183 i965_irq_reset 374 180 -194 cherryview_irq_reset 379 185 -194 i915_irq_reset 407 209 -198 ibx_irq_reset 332 133 -199 gen5_gt_irq_postinstall 533 332 -201 gen8_irq_power_well_pre_disable 434 204 -230 gen8_gt_irq_postinstall 469 196 -273 gen8_de_irq_postinstall 1200 836 -364 gen5_gt_irq_reset 471 76 -395 gen8_gt_irq_reset 775 99 -676 gen8_irq_reset 1100 333 -767 gen11_irq_reset 1959 686 -1273 Total: Before=2259222, After=2253657, chg -0.25% v2: - Make checkpatch happy with a temporary which_ (Checkpatch). - Reorder the arguments for the INIT macros (Ville). - Correctly explain when the register offsets change in the commit message (Ville). - Use more line breaks in the macro calls to make the arguments look a little more organized/readable. - Update the bloat-o-meter output (minor change only). Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v1) Signed-off-by:
-
https://github.com/intel/gvt-linuxJoonas Lahtinen authored
gvt-next-2019-04-16 - Refine range of MCHBAR snapshot (Yakui) - Refine out-of-sync page struct (Yakui) - Remove unused vGPU sreg (Yan) - Refind MMIO reg names (Xiaolin) - Proper handling of sync/async flip (Colin) - Proper handling of PIPE_CONTROL/MI_FLUSH_DW index mode (Xiaolin) - EXCC reg mask fix (Colin) Signed-off-by:
-
Chris Wilson authored
drivers/gpu/drm/i915/intel_pm.c:8352:9: error: incompatible types in comparison expression (different address spaces) drivers/gpu/drm/i915/intel_pm.c:8359:9: error: incompatible types in comparison expression (different address spaces) Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190412085410.10392-3-chris@chris-wilson.co.uk
-
Chris Wilson authored
Since removal of the "missed interrupt detection" nobody used the result of whether or not we signaled anybody during that invocation, so now remove the return value. References: 789659f4 ("drm/i915: Drop fake breadcrumb irq") Signed-off-by:
-
Colin Xu authored
According to GFX PRM on 01.org, bit 31:16 of mmio 0x22028 should be masks. Fixes: 17865713 ("drm/i915/gvt: vGPU context switch") Reviewed-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
Colin Xu <colin.xu@intel.com> Signed-off-by:
-
Xiaolin Zhang authored
with the introduce of "switch to use HWS indices rather than address", guest GPU hang observed when running workloads which will update the seqno to the real HW HWSP, not vitural GPU HWSP and then cause GPU hang. this patch is to revoke index mode in PIPE_CTRL and MI_FLUSH_DW and patch guest GPU HWSP address value to these commands. Fixes: 54939ea0 ("drm/i915: Switch to use HWS indices rather than addresses") Reviewed-by:
Xiaolin Zhang <xiaolin.zhang@intel.com> Signed-off-by:
-
Zhenyu Wang authored
Merge back drm-intel-next for engine name definition refinement and 54939ea0 ("drm/i915: Switch to use HWS indices rather than addresses") that would need gvt fixes to depend on. Signed-off-by:
-
- 15 Apr, 2019 2 commits
-
-
Manasi Navare authored
This is one of the patches to start replacing drm pointers and use the intel_atomic_state and intel_crtc to derive the necessary intel state variables required for the intel modeset functions. v3: * Remove the unwanted newline (Ville) v2: * Flip the function arguments (Ville) * Remove some remaining instances of drm pointers (Ville) * Use old_crtc_state and new_crtc_state (Ville) Suggested-by:
Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
-
Chris Wilson authored
If the driver is wedged, we can not issue the requests to exercise the timelines or the system across suspend, so skip the tests. live_hangcheck is there to fail if we cannot recover. Signed-off-by:
-
- 13 Apr, 2019 1 commit
-
-
Chris Wilson authored
Start weaning ourselves off the implicit I915_WRITE macro madness and start using the explicit intel_uncore mmio access. Signed-off-by:
-
- 12 Apr, 2019 8 commits
-
-
Bob Paauwe authored
Most of the conditional code for ICELAKE also applies to ELKHARTLAKE so use IS_GEN(dev_priv, 11) even for PM and Workarounds for now. v2: - Rename commit (Jose) - Include a wm workaround (Jose and Lucas) - Include display core init (Jose and Lucas) v3: Add a missing case of gen greater-than 11 (Jose) Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
-
Mika Kuoppala authored
If cat error is set, we need to clear it by acking it. Further, if it is set, we must not do a normal request for reset. v2: avoid goto (Chris) v3: comment, error format, direct assign (Chris) Bspec: 12567 Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Mika Kuoppala authored
If the engine says it is ready for reset, it is ready so avoid further dancing and proceed. v2: reg (Chris) v3: request, ack, mask from following patch (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Ville Syrjälä authored
On ICL the DMC doesn't reinit combo PHY B so we should not warn about its state being bogus during the display core uninit. Signed-off-by:
Imre Deak <imre.deak@intel.com>
-
Ville Syrjälä authored
We are no longer calling bxt_ddi_phy_calc_lane_lat_optim_mask() when intel{hdmi,dp}_compute_config() succeeds, and instead only call it when those fail. This is fallout from the bool->int .compute_config() conversion which failed to invert the return value check before calling bxt_ddi_phy_calc_lane_lat_optim_mask(). Let's just replace it with an early bailout so that it's harder to miss. This restores the correct latency optim setting calculation (which could fix some real failures), and avoids the MISSING_CASE() from bxt_ddi_phy_calc_lane_lat_optim_mask() after intel{hdmi,dp}_compute_config() has failed. Cc: Lyude Paul <lyude@redhat.com> Fixes: 204474a6 ("drm/i915: Pass down rc in intel_encoder->compute_config()") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109373Signed-off-by:Lyude Paul <lyude@redhat.com>
-
Chris Wilson authored
The HW resets it CSB tail pointer on resetting the engine. Most of the time. In case it doesn't (and for system resume) we write the expected value anyway. For extra paranoia, flush the write before we invalidate the cacheline. Signed-off-by:
-
Radhakrishna Sripada authored
RMW is used only in the disable path. Using it in enable path for consistency. Suggested-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by:
-
Radhakrishna Sripada authored
No functional change. Renaming the function to reflect the specific WA. Suggested-by:
-
- 11 Apr, 2019 12 commits
-
-
Ville Syrjälä authored
Currently we enable FEC even when DSC is no used. While that is theoretically valid supposedly there isn't much of a benefit from this. But more importantly we do not account for the FEC link bandwidth overhead (2.4%) in the non-DSC link bandwidth computations. So the code may think we have enough bandwidth when we in fact do not. Cc: stable@vger.kernel.org Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Fixes: 240999cf ("i915/dp/fec: Add fec_enable to the crtc state.") Signed-off-by:
-
Chris Wilson authored
As intel_runtime_pm_get/_put may be called from any blockable context, we need to avoid allowing reclaim from our mallocs, as we need to avoid tainting any mutexes held by the callers (as they may themselves not allow for allocations as they are taken in the shrinker). <4> [435.339331] WARNING: possible circular locking dependency detected <4> [435.339364] 5.1.0-rc4-CI-Trybot_4116+ #1 Tainted: G U <4> [435.339395] ------------------------------------------------------ <4> [435.339426] gem_caching/1334 is trying to acquire lock: <4> [435.339456] 000000004505c39b (wakeref#3){+.+.}, at: intel_engine_pm_put+0x1b/0x40 [i915] <4> [435.339788] but task is already holding lock: <4> [435.339819] 00000000ee77b4ed (fs_reclaim){+.+.}, at: fs_reclaim_acquire.part.24+0x0/0x30 <4> [435.339879] which lock already depends on the new lock. <4> [435.339918] the existing dependency chain (in reverse order) is: <4> [435.339952] -> #1 (fs_reclaim){+.+.}: <4> [435.339998] fs_reclaim_acquire.part.24+0x24/0x30 <4> [435.340035] kmem_cache_alloc_trace+0x2a/0x290 <4> [435.340311] __print_intel_runtime_pm_wakeref+0x24/0x160 [i915] <4> [435.340590] untrack_intel_runtime_pm_wakeref+0x16e/0x1d0 [i915] <4> [435.340869] intel_runtime_pm_put_unchecked+0xd/0x30 [i915] <4> [435.341147] __intel_wakeref_put_once+0x22/0x40 [i915] <4> [435.341508] i915_request_retire+0x477/0xaf0 [i915] <4> [435.341871] ring_retire_requests+0x86/0x160 [i915] <4> [435.342226] i915_retire_requests+0x58/0xc0 [i915] <4> [435.342576] retire_work_handler+0x5b/0x70 [i915] <4> [435.342615] process_one_work+0x245/0x610 <4> [435.342646] worker_thread+0x37/0x380 <4> [435.342679] kthread+0x119/0x130 <4> [435.342714] ret_from_fork+0x3a/0x50 <4> [435.342739] -> #0 (wakeref#3){+.+.}: <4> [435.342788] lock_acquire+0xa6/0x1c0 <4> [435.342822] __mutex_lock+0x8c/0x960 <4> [435.342853] atomic_dec_and_mutex_lock+0x33/0x50 <4> [435.343151] intel_engine_pm_put+0x1b/0x40 [i915] <4> [435.343501] i915_request_retire+0x477/0xaf0 [i915] <4> [435.343851] ring_retire_requests+0x86/0x160 [i915] <4> [435.344202] i915_retire_requests+0x58/0xc0 [i915] <4> [435.344543] i915_gem_shrink+0xd8/0x5b0 [i915] <4> [435.344835] i915_drop_caches_set+0x17b/0x250 [i915] <4> [435.344877] simple_attr_write+0xb0/0xd0 <4> [435.344911] full_proxy_write+0x51/0x80 <4> [435.344943] vfs_write+0xbd/0x1b0 <4> [435.344972] ksys_write+0x55/0xe0 <4> [435.345002] do_syscall_64+0x55/0x190 <4> [435.345040] entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by: -
Chris Wilson authored
During reset, we try and stop the active ring. This has the consequence that we often clobber the RING registers within the context image. When we find an active request, we update the context image to rerun that request (if it was guilty, we replace the hanging user payload with NOPs). However, we were ignoring an active context if the request had completed, with the consequence that the next submission on that request would start with RING_HEAD==0 and not the tail of the previous request, causing all requests still in the ring to be rerun. Rare, but occasionally seen within CI where we would spot that the context seqno would reverse and complain that we were retiring an incomplete request. <0> [412.390350] <idle>-0 3d.s2 408373352us : __i915_request_submit: rcs0 fence 1e95b:3640 -> current 3638 <0> [412.390350] <idle>-0 3d.s2 408373353us : __i915_request_submit: rcs0 fence 1e95b:3642 -> current 3638 <0> [412.390350] <idle>-0 3d.s2 408373354us : __i915_request_submit: rcs0 fence 1e95b:3644 -> current 3638 <0> [412.390350] <idle>-0 3d.s2 408373354us : __i915_request_submit: rcs0 fence 1e95b:3646 -> current 3638 <0> [412.390350] <idle>-0 3d.s2 408373356us : __execlists_submission_tasklet: rcs0 in[0]: ctx=2.1, fence 1e95b:3646 (current 3638), prio=4 <0> [412.390350] i915_sel-4613 0.... 408373374us : __i915_request_commit: rcs0 fence 1e95b:3648 <0> [412.390350] i915_sel-4613 0d..1 408373377us : process_csb: rcs0 cs-irq head=2, tail=3 <0> [412.390350] i915_sel-4613 0d..1 408373377us : process_csb: rcs0 csb[3]: status=0x00000001:0x00000000, active=0x1 <0> [412.390350] i915_sel-4613 0d..1 408373378us : __i915_request_submit: rcs0 fence 1e95b:3648 -> current 3638 <0> [412.390350] <idle>-0 3..s1 408373378us : execlists_submission_tasklet: rcs0 awake?=1, active=5 <0> [412.390350] i915_sel-4613 0d..1 408373379us : __execlists_submission_tasklet: rcs0 in[0]: ctx=2.2, fence 1e95b:3648 (current 3638), prio=4 <0> [412.390350] i915_sel-4613 0.... 408373381us : i915_reset_engine: rcs0 flags=4 <0> [412.390350] i915_sel-4613 0.... 408373382us : execlists_reset_prepare: rcs0: depth<-0 <0> [412.390350] <idle>-0 3d.s2 408373390us : process_csb: rcs0 cs-irq head=3, tail=4 <0> [412.390350] <idle>-0 3d.s2 408373390us : process_csb: rcs0 csb[4]: status=0x00008002:0x00000002, active=0x1 <0> [412.390350] <idle>-0 3d.s2 408373390us : process_csb: rcs0 out[0]: ctx=2.2, fence 1e95b:3648 (current 3640), prio=4 <0> [412.390350] i915_sel-4613 0.... 408373401us : intel_engine_stop_cs: rcs0 <0> [412.390350] i915_sel-4613 0d..1 408373402us : process_csb: rcs0 cs-irq head=4, tail=4 <0> [412.390350] i915_sel-4613 0.... 408373403us : intel_gpu_reset: engine_mask=1 <0> [412.390350] i915_sel-4613 0d..1 408373408us : execlists_cancel_port_requests: rcs0:port0 fence 1e95b:3648, (current 3648) <0> [412.390350] i915_sel-4613 0.... 408373442us : intel_engine_cancel_stop_cs: rcs0 <0> [412.390350] i915_sel-4613 0.... 408373442us : execlists_reset_finish: rcs0: depth->0 <0> [412.390350] ksoftirq-26 3..s. 408373442us : execlists_submission_tasklet: rcs0 awake?=1, active=0 <0> [412.390350] ksoftirq-26 3d.s1 408373443us : process_csb: rcs0 cs-irq head=5, tail=5 <0> [412.390350] i915_sel-4613 0.... 408373475us : i915_request_retire: rcs0 fence 1e95b:3640, current 3648 <0> [412.390350] i915_sel-4613 0.... 408373476us : i915_request_retire: __retire_engine_request(rcs0) fence 1e95b:3640, current 3648 <0> [412.390350] i915_sel-4613 0.... 408373494us : __i915_request_commit: rcs0 fence 1e95b:3650 <0> [412.390350] i915_sel-4613 0d..1 408373496us : process_csb: rcs0 cs-irq head=5, tail=5 <0> [412.390350] i915_sel-4613 0d..1 408373496us : __i915_request_submit: rcs0 fence 1e95b:3650 -> current 3648 <0> [412.390350] i915_sel-4613 0d..1 408373498us : __execlists_submission_tasklet: rcs0 in[0]: ctx=2.1, fence 1e95b:3650 (current 3648), prio=6 <0> [412.390350] i915_sel-4613 0.... 408373500us : i915_request_retire_upto: rcs0 fence 1e95b:3648, current 3648 <0> [412.390350] i915_sel-4613 0.... 408373500us : i915_request_retire: rcs0 fence 1e95b:3642, current 3648 <0> [412.390350] i915_sel-4613 0.... 408373501us : i915_request_retire: __retire_engine_request(rcs0) fence 1e95b:3642, current 3648 <0> [412.390350] i915_sel-4613 0.... 408373514us : i915_request_retire: rcs0 fence 1e95b:3644, current 3648 <0> [412.390350] i915_sel-4613 0.... 408373515us : i915_request_retire: __retire_engine_request(rcs0) fence 1e95b:3644, current 3648 <0> [412.390350] i915_sel-4613 0.... 408373527us : i915_request_retire: rcs0 fence 1e95b:3646, current 3640 <0> [412.390350] <idle>-0 3..s1 408373569us : execlists_submission_tasklet: rcs0 awake?=1, active=1 <0> [412.390350] <idle>-0 3d.s2 408373569us : process_csb: rcs0 cs-irq head=5, tail=1 <0> [412.390350] <idle>-0 3d.s2 408373570us : process_csb: rcs0 csb[0]: status=0x00000001:0x00000000, active=0x1 <0> [412.390350] <idle>-0 3d.s2 408373570us : process_csb: rcs0 csb[1]: status=0x00000018:0x00000002, active=0x5 <0> [412.390350] <idle>-0 3d.s2 408373570us : process_csb: rcs0 out[0]: ctx=2.1, fence 1e95b:3650 (current 3650), prio=6 <0> [412.390350] <idle>-0 3d.s2 408373571us : process_csb: rcs0 completed ctx=2 <0> [412.390350] i915_sel-4613 0.... 408373621us : i915_request_retire: i915_request_retire:253 GEM_BUG_ON(!i915_request_completed(request)) v2: Fixup the cancellation path to drain the CSB and reset the pointers. Signed-off-by: -
Chris Wilson authored
Before causing guc and execlists to diverge further (breaking guc in the process), take a copy of the current reset procedure and make it local to the guc submission backend Signed-off-by:
-
Mika Kuoppala authored
On gen11 writing to read only ppgtt page causes a gpu hang. This behaviour is different than with previous gen where read only ppgtt access is supported. On those, the write is just dropped without visible side effects. Disable ro ppgtt support on gen11 until a solution can be found to bring it into line with its predecessors. References: HSDES#1807136187 References: https://bugzilla.freedesktop.org/show_bug.cgi?id=108569 Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Chris Wilson authored
As i915_requests are put into an RCU-freelist, they may get reused before debugobjects notice them as being freed. On cleanup, explicitly call i915_sw_fence_fini() so that the debugobject is properly tracked. Reported-by:
-
Ville Syrjälä authored
No point in duplicating all this code when we can just use a variable to hold the output bpp (the only thing that differs between the two branches). Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.comk> Signed-off-by:
-
Ville Syrjälä authored
6bpc is only legal for RGB and RAW pixel encodings. For the rest the minimum is 8bpc. Set our lower limit accordingly. Signed-off-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
-
Mika Kuoppala authored
Now when we can support variable csb fifo sizes, disable legacy mode. By disabling legacy we hope to get better hw testing coverage by assuming everyone else have switched over. v2: rebase References: https://bugs.freedesktop.org/show_bug.cgi?id=110338 Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Kelvin Gardiner <kelvin.gardiner@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Mika Kuoppala authored
Make csb entry count variable in preparation for larger CSB status FIFO size found on gen11+ hardware. v2: adapt to hwsp access only (Chris) non continuous mmio (Daniele) v3: entries (Chris), fix macro for checkpatch v4: num_entries (Chris) v5: consistency on num_entries Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: -
Mika Kuoppala authored
With gen11 the interrupt registers are shared between 2 engines, with Engine1 instance being upper word and Engine0 instance being lower. Annoyingly gen11 selected the pm interrupts to be in the Engine1 instance. Rectify the situation by shifting the access accordingly, based on gen. v2: comments, warn on overzealous rps_events Bugzilla: https://bugzilla.freedesktop.org/show_bug.cgi?id=108059 Testcase: igt/i915_pm_rps@min-max-config-loaded Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Mika Kuoppala authored
There is no video turbo mode for gen11, so don't set it. v2: inline (Chris) v3: brackets (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
