- 08 Feb, 2008 40 commits
-
-
Alexey Dobriyan authored
Move code around so as to reduce the number of forward-declarations. Signed-off-by:
Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Alexey Dobriyan authored
Pseudo-code for lookup effectively is: LOCK kernel LOCK proc_subdir_lock find PDE UNLOCK proc_subdir_lock get inode LOCK proc_subdir_lock goto unlock UNLOCK proc_subdir_lock UNLOCK kernel We can get rid of LOCK/UNLOCK pair after getting inode simply by jumping to unlock_kernel() directly. Signed-off-by:
-
Alexey Dobriyan authored
proc is not modular, so MODULE_LICENSE just expands to empty space. proc without doubts remains GPLed. Signed-off-by:
-
Pavel Emelyanov authored
There's already an option controlling the net namespaces cloning code, so make it work the same way as all the other namespaces' options. Signed-off-by:
Pavel Emelyanov <xemul@openvz.org> Cc: "David S. Miller" <davem@davemloft.net> Acked-by:
Serge Hallyn <serue@us.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Signed-off-by:
-
Pavel Emelyanov authored
Just like with the user namespaces, move the namespace management code into the separate .c file and mark the (already existing) PID_NS option as "depend on NAMESPACES" [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Pavel Emelyanov authored
Make the user_namespace.o compilation depend on this option and move the init_user_ns into user.c file to make the kernel compile and work without the namespaces support. This make the user namespace code be organized similar to other namespaces'. Also mask the USER_NS option as "depend on NAMESPACES". [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Pavel Emelyanov authored
Currently the IPC namespace management code is spread over the ipc/*.c files. I moved this code into ipc/namespace.c file which is compiled out when needed. The linux/ipc_namespace.h file is used to store the prototypes of the functions in namespace.c and the stubs for NAMESPACES=n case. This is done so, because the stub for copy_ipc_namespace requires the knowledge of the CLONE_NEWIPC flag, which is in sched.h. But the linux/ipc.h file itself in included into many many .c files via the sys.h->sem.h sequence so adding the sched.h into it will make all these .c depend on sched.h which is not that good. On the other hand the knowledge about the namespaces stuff is required in 4 .c files only. Besides, this patch compiles out some auxiliary functions from ipc/sem.c, msg.c and shm.c files. It turned out that moving these functions into namespaces.c is not that easy because they use many other calls and macros from the original file. Moving them would make this patch complicated. On the other hand all these functions can be consolidated, so I will send a separate patch doing this a bit later. Signed-off-by:
-
Pavel Emelyanov authored
Currently all the namespace management code is in the kernel/utsname.c file, so just compile it out and make stubs in the appropriate header. The init namespace itself is in init/version.c and is in the kernel all the time. Signed-off-by:
-
Pavel Emelyanov authored
The option is selectable if EMBEDDED is chosen only. When the EMBEDDED is off namespaces will be on. Signed-off-by:
-
Nishanth Aravamudan authored
When I replaced hugetlb_dynamic_pool with nr_overcommit_hugepages I used proc_doulongvec_minmax() directly. However, hugetlb.c's locking rules require that all counter modifications occur under the hugetlb_lock. Add a callback into the hugetlb code similar to the one for nr_hugepages. Grab the lock around the manipulation of nr_overcommit_hugepages in proc_doulongvec_minmax(). Signed-off-by:
Nishanth Aravamudan <nacc@us.ibm.com> Acked-by:
Adam Litke <agl@us.ibm.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: <stable@kernel.org> Signed-off-by:
-
Ulisses Furquim authored
As the IN_ONESHOT bit is never set when an event is sent we must check it in the watch's mask and not in the event's mask. Signed-off-by:
Ulisses Furquim <ulissesf@gmail.com> Reported-by:
"Clem Taylor" <clem.taylor@gmail.com> Tested-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dmLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: (44 commits) dm raid1: report fault status dm raid1: handle read failures dm raid1: fix EIO after log failure dm raid1: handle recovery failures dm raid1: handle write failures dm snapshot: combine consecutive exceptions in memory dm: stripe enhanced status return dm: stripe trigger event on failure dm log: auto load modules dm: move deferred bio flushing to workqueue dm crypt: use async crypto dm crypt: prepare async callback fn dm crypt: add completion for async dm crypt: add async request mempool dm crypt: extract scatterlist processing dm crypt: tidy io ref counting dm crypt: introduce crypt_write_io_loop dm crypt: abstract crypt_write_done dm crypt: store sector mapping in dm_crypt_io dm crypt: move queue functions ...
-
git://lm-sensors.org/kernel/mhoffman/hwmon-2.6Linus Torvalds authored
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: (59 commits) hwmon: (lm80) Add individual alarm files hwmon: (lm80) De-macro the sysfs callbacks hwmon: (lm80) Various cleanups hwmon: (w83627hf) Refactor beep enable handling hwmon: (w83627hf) Add individual alarm and beep files hwmon: (w83627hf) Enable VBAT monitoring hwmon: (w83627ehf) The W83627DHG has 8 VID pins hwmon: (asb100) Add individual alarm files hwmon: (asb100) De-macro the sysfs callbacks hwmon: (asb100) Various cleanups hwmon: VRM is not written to registers hwmon: (dme1737) fix Super-IO device ID override hwmon: (dme1737) fix divide-by-0 hwmon: (abituguru3) Add AUX4 fan input for Abit IP35 Pro hwmon: Add support for Texas Instruments/Burr-Brown ADS7828 hwmon: (adm9240) Add individual alarm files hwmon: (lm77) Add individual alarm files hwmon: Discard useless I2C driver IDs hwmon: (lm85) Make the pwmN_enable files writable hwmon: (lm85) Return standard values in pwmN_enable ...
-
git://oss.sgi.com:8090/xfs/xfs-2.6Linus Torvalds authored
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6: (62 commits) [XFS] add __init/__exit mark to specific init/cleanup functions [XFS] Fix oops in xfs_file_readdir() [XFS] kill xfs_root [XFS] keep i_nlink updated and use proper accessors [XFS] stop updating inode->i_blocks [XFS] Make xfs_ail_check check less by default [XFS] Move AIL pushing into it's own thread [XFS] use generic_permission [XFS] stop re-checking permissions in xfs_swapext [XFS] clean up xfs_swapext [XFS] remove permission check from xfs_change_file_space [XFS] prevent panic during log recovery due to bogus op_hdr length [XFS] Cleanup various fid related bits: [XFS] Fix xfs_lowbit64 [XFS] Remove CFORK macros and use code directly in IFORK and DFORK macros. [XFS] kill superflous buffer locking (2nd attempt) [XFS] Use kernel-supplied "roundup_pow_of_two" for simplicity [XFS] Remove the BPCSHIFT and NB* based macros from XFS. [XFS] Remove bogus assert [XFS] optimize XFS_IS_REALTIME_INODE w/o realtime config ...
-
Nick Piggin authored
Signed-off-by:
Nick Piggin <npiggin@suse.de> Cc: Douglas Gilbert <dougg@torque.net> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/christoph/vmLinus Torvalds authored
* 'slub-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/christoph/vm: SLUB: fix checkpatch warnings Use non atomic unlock SLUB: Support for performance statistics SLUB: Alternate fast paths using cmpxchg_local SLUB: Use unique end pointer for each slab page. SLUB: Deal with annoying gcc warning on kfree()
-
Jonathan Brassow authored
This patch adds extra information to the mirror status output, so that it can be determined which device(s) have failed. For each mirror device, a character is printed indicating the most severe error encountered. The characters are: * A => Alive - No failures * D => Dead - A write failure occurred leaving mirror out-of-sync * S => Sync - A sychronization failure occurred, mirror out-of-sync * R => Read - A read failure occurred, mirror data unaffected This allows userspace to properly reconfigure the mirror set. Signed-off-by:
Jonathan Brassow <jbrassow@redhat.com> Signed-off-by:
Alasdair G Kergon <agk@redhat.com>
-
Jonathan Brassow authored
This patch gives the ability to respond-to/record device failures that happen during read operations. It also adds the ability to read from mirror devices that are not the primary if they are in-sync. There are essentially two read paths in mirroring; the direct path and the queued path. When a read request is mapped, if the region is 'in-sync' the direct path is taken; otherwise the queued path is taken. If the direct path is taken, we must record bio information so that if the read fails we can retry it. We then discover the status of a direct read through mirror_end_io. If the read has failed, we will mark the device from which the read was attempted as failed (so we don't try to read from it again), restore the bio and try again. If the queued path is taken, we discover the results of the read from 'read_callback'. If the device failed, we will mark the device as failed and attempt the read again if there is another device where this region is known to be 'in-sync'. Signed-off-by:
-
Jonathan Brassow authored
This patch adds the ability to requeue write I/O to core device-mapper when there is a log device failure. If a write to the log produces and error, the pending writes are put on the "failures" list. Since the log is marked as failed, they will stay on the failures list until a suspend happens. Suspends come in two phases, presuspend and postsuspend. We must make sure that all the writes on the failures list are requeued in the presuspend phase (a requirement of dm core). This means that recovery must be complete (because writes may be delayed behind it) and the failures list must be requeued before we return from presuspend. The mechanisms to ensure recovery is complete (or stopped) was already in place, but needed to be moved from postsuspend to presuspend. We rely on 'flush_workqueue' to ensure that the mirror thread is complete and therefore, has requeued all writes in the failures list. Because we are using flush_workqueue, we must ensure that no additional 'queue_work' calls will produce additional I/O that we need to requeue (because once we return from presuspend, we are unable to do anything about it). 'queue_work' is called in response to the following functions: - complete_resync_work = NA, recovery is stopped - rh_dec (mirror_end_io) = NA, only calls 'queue_work' if it is ready to recover the region (recovery is stopped) or it needs to clear the region in the log* **this doesn't get called while suspending** - rh_recovery_end = NA, recovery is stopped - rh_recovery_start = NA, recovery is stopped - write_callback = 1) Writes w/o failures simply call bio_endio -> mirror_end_io -> rh_dec (see rh_dec above) 2) Writes with failures are put on the failures list and queue_work is called** ** write_callbacks don't happen during suspend ** - do_failures = NA, 'queue_work' not called if suspending - add_mirror (initialization) = NA, only done on mirror creation - queue_bio = NA, 1) delayed I/O scheduled before flush_workqueue is called. 2) No more I/Os are being issued. 3) Re-attempted READs can still be handled. (Write completions are handled through rh_dec/ write_callback - mention above - and do not use queue_bio.) Signed-off-by: -
Jonathan Brassow authored
This patch adds the calls to 'fail_mirror' if an error occurs during mirror recovery (aka resynchronization). 'fail_mirror' is responsible for recording the type of error by mirror device and ensuring an event gets raised for the purpose of notifying userspace. Signed-off-by:
-
Jonathan Brassow authored
This patch gives mirror the ability to handle device failures during normal write operations. The 'write_callback' function is called when a write completes. If all the writes failed or succeeded, we report failure or success respectively. If some of the writes failed, we call fail_mirror; which increments the error count for the device, notes the type of error encountered (DM_RAID1_WRITE_ERROR), and selects a new primary (if necessary). Note that the primary device can never change while the mirror is not in-sync (IOW, while recovery is happening.) This means that the scenario where a failed write changes the primary and gives recovery_complete a chance to misread the primary never happens. The fact that the primary can change has necessitated the change to the default_mirror field. We need to protect against reading garbage while the primary changes. We then add the bio to a new list in the mirror set, 'failures'. For every bio in the 'failures' list, we call a new function, '__bio_mark_nosync', where we mark the region 'not-in-sync' in the log and properly set the region state as, RH_NOSYNC. Userspace must also be notified of the failure. This is done by 'raising an event' (dm_table_event()). If fail_mirror is called in process context the event can be raised right away. If in interrupt context, the event is deferred to the kmirrord thread - which raises the event if 'event_waiting' is set. Backwards compatibility is maintained by ignoring errors if the DM_FEATURES_HANDLE_ERRORS flag is not present. Signed-off-by:
-
Milan Broz authored
Provided sector_t is 64 bits, reduce the in-memory footprint of the snapshot exception table by the simple method of using unused bits of the chunk number to combine consecutive entries. Signed-off-by:
Milan Broz <mbroz@redhat.com> Signed-off-by:
-
Brian Wood authored
This patch adds additional information to the status line. It is added at the end of the returned text so it will not interfere with existing implementations using this data. The addition of this information will allow for a common return interface to match that returned with the dm-raid1.c status line (with Jonathan Brassow's patches). Here is a sample of what is returned with a mirror "status" call: isw_eeaaabgfg_mirror: 0 488390920 mirror 2 8:16 8:32 3727/3727 1 AA 1 core Here's what's returned with this patch for a stripe "status" call: isw_dheeijjdej_stripe: 0 976783872 striped 2 8:16 8:32 1 AA Signed-off-by:
Brian Wood <brian.j.wood@intel.com> Signed-off-by:
-
Brian Wood authored
This patch adds the stripe_end_io function to process errors that might occur after an IO operation. As part of this there are a number of enhancements made to record and trigger events: - New atomic variable in struct stripe to record the number of errors each stripe volume device has experienced (could be used later with uevents to report back directly to userspace) - New workqueue/work struct setup to process the trigger_event function - New end_io function. It is here that testing for BIO error conditions take place. It determines the exact stripe that cause the error, records this in the new atomic variable, and calls the queue_work() function - New trigger_event function to process failure events. This calls dm_table_event() Signed-off-by:
-
Jonathan Brassow authored
If the log type is not recognised, attempt to load the module 'dm-log-<type>.ko'. Signed-off-by:
-
Milan Broz authored
Add a single-thread workqueue for each mapped device and move flushing of the lists of pushback and deferred bios to this new workqueue. Signed-off-by:
-
Milan Broz authored
dm-crypt: Use crypto ablkcipher interface Move encrypt/decrypt core to async crypto call. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Milan Broz authored
dm-crypt: Use crypto ablkcipher interface Prepare callback function for async crypto operation. Signed-off-by:
-
Milan Broz authored
dm-crypt: Use crypto ablkcipher interface Prepare completion for async crypto request. Signed-off-by:
-
Milan Broz authored
dm-crypt: Use crypto ablkcipher interface Introduce mempool for async crypto requests. cc->req is used mainly during synchronous operations (to prevent allocation and deallocation of the same object). Signed-off-by:
-
Milan Broz authored
dm-crypt: Use crypto ablkcipher interface Move scatterlists to separate dm_crypt_struct and pick out block processing from crypt_convert. Signed-off-by:
-
Milan Broz authored
Make io reference counting more obvious. Signed-off-by:
-
Milan Broz authored
Introduce crypt_write_io_loop(). Signed-off-by:
-
Milan Broz authored
Process write request in separate function and queue final bio through io workqueue. Signed-off-by:
-
Milan Broz authored
Add sector into dm_crypt_io instead of using local variable. Signed-off-by:
-
Alasdair G Kergon authored
Reorder kcryptd functions for clarity. Signed-off-by: -
Milan Broz authored
Rename functions to follow calling convention. Prepare write io error processing function skeleton. Signed-off-by:
-
Milan Broz authored
Simplify crypt_endio function. Signed-off-by:
-
Milan Broz authored
Move error code setting outside of crypt_dec_pending function. Use -EIO if crypt_convert_scatterlist() fails. Signed-off-by:
-
Milan Broz authored
Remove write attribute from convert_context and use bio flag instead. Signed-off-by:
-
