- 10 Nov, 2019 10 commits
-
-
Robert Richter authored
Update on CPER DIMM naming convention and DIMM ranks. [ bp: Touchups. ] Signed-off-by:
Robert Richter <rrichter@marvell.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: "linux-doc@vger.kernel.org" <linux-doc@vger.kernel.org> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20191106093239.25517-14-rrichter@marvell.com
-
Robert Richter authored
The code in ghes_edac.c and edac_mc.c for grain_bits calculation and calling trace_mc_event() is now the same. Move it to a single location in edac_raw_mc_handle_error(). The only difference is the missing IS_ENABLED(CONFIG_RAS) switch, but this is needed for ghes too. Signed-off-by:
-
Robert Richter authored
detail_location[] is used to collect two location strings so they can be passed as one to trace_mc_event(). Instead of having an extra copy step, assemble the location string in other_detail[] from the beginning. Using other_detail[] to call trace_mc_event() is now the same as in edac_mc.c and code can be unified. Signed-off-by:
James Morse <james.morse@arm.com> Reviewed-by:
-
Robert Richter authored
The current code to convert a physical address mask to a grain (defined as granularity in bytes) is: e->grain = ~(mem_err->physical_addr_mask & ~PAGE_MASK); This is broken in several ways: 1) It calculates to wrong grain values. E.g., a physical address mask of ~0xfff should give a grain of 0x1000. Without considering PAGE_MASK, there is an off-by-one. Things are worse when also filtering it with ~PAGE_MASK. This will calculate to a grain with the upper bits set. In the example it even calculates to ~0. 2) The grain does not depend on and is unrelated to the kernel's page-size. The page-size only matters when unmapping memory in memory_failure(). Smaller grains are wrongly rounded up to the page-size, on architectures with a configurable page-size (e.g. arm64) this could round up to the even bigger page-size of the hypervisor. Fix this with: e->grain = ~mem_err->physical_addr_mask + 1; The grain_bits are defined as: grain = 1 << grain_bits; Change also the grain_bits calculation accordingly, it is the same formula as in edac_mc.c now and the code can be unified. The value in ->physical_addr_mask coming from firmware is assumed to be contiguous, but this is not sanity-checked. However, in case the mask is non-contiguous, a conversion to grain_bits effectively converts the grain bit mask to a power of 2 by rounding it up. Suggested-by:
-
Robert Richter authored
Use standard macros for page calculations. Signed-off-by:
-
Robert Richter authored
There never has been such function edac_raw_error_desc_clean() and in function ghes_edac_report_mem_error() the whole struct is zero'ed including the string arrays. Remove that comment. Signed-off-by:
-
Robert Richter authored
Reduce the indentation level in edac_mc_handle_error() a bit. No functional changes. Signed-off-by:
-
Robert Richter authored
The e string to which this is pointing to has already been cleared earlier in the function so remove the needless zero string termination. [ bp: Correct the commit message. ] Suggested-by:
Joe Perches <joe@perches.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20191106093239.25517-6-rrichter@marvell.com
-
Robert Richter authored
No need to crash the system in case edac_mc_alloc() is called with invalid arguments, just warn and return. This would cause a checkpatch warning when touching the code later, so just fix it. Signed-off-by:
-
Robert Richter authored
Introduce an mci_for_each_dimm() iterator. It returns a pointer to a struct dimm_info. This makes the declaration and use of an index obsolete and avoids access to internal data of struct mci (direct array access etc). [ bp: push the struct dimm_info *dimm; declaration into the CONFIG_EDAC_DEBUG block. ] Signed-off-by:
-
- 09 Nov, 2019 3 commits
-
-
Robert Richter authored
The EDAC_DIMM_OFF() macro takes 5 arguments to get the DIMM's index. Simplify this by storing the index in struct dimm_info to avoid its calculation and remove the EDAC_DIMM_OFF() macro. The index can be directly used then. Another advantage is that edac_mc_alloc() could be used even if the exact size of the layers is unknown. Only the number of DIMMs would be needed. Rename iterator variable to idx, while at it. The name is more handy, esp. when searching for it in the code. Signed-off-by:
-
Robert Richter authored
The EDAC_DIMM_PTR() macro takes 3 arguments from struct mem_ctl_info. Clean up this interface to only pass the mci struct and replace this macro with a new function edac_get_dimm(). Also introduce an edac_get_dimm_by_index() function for later use. This allows it to get a DIMM pointer only by a given index. This can be useful if the DIMM's position within the layers of the memory controller or the exact size of the layers are unknown. Small style changes made for some hunks after applying the semantic patch. Semantic patch used: @@ expression mci, a, b,c; @@ -EDAC_DIMM_PTR(mci->layers, mci->dimms, mci->n_layers, a, b, c) +edac_get_dimm(mci, a, b, c) [ bp: Touchups. ] Signed-off-by:
-
Borislav Petkov authored
This message keeps flooding dmesg on boxes where ECC is disabled or the DIMMs do not support ECC but the module gets auto-probed. What's even worse is that autoprobing happens on every CPU due to the CPU-family matching the driver does and uevent being generated for each CPU device. What is more, this message is becoming even more useless on newer systems where forcing ECC is not recommended and it should be done in the BIOS so the BIOS can do all the necessary work, i.e., just setting a bit in an MSR is not enough anymore. So get rid of it. Signed-off-by:
-
- 08 Nov, 2019 1 commit
-
-
Robert Richter authored
The ghes registration and refcount is broken in several ways: * ghes_edac_register() returns with success for a 2nd instance even if a first instance's registration is still running. This is not correct as the first instance may fail later. A subsequent registration may not finish before the first. Parallel registrations must be avoided. * The refcount was increased even if a registration failed. This leads to stale counters preventing the device from being released. * The ghes refcount may not be decremented properly on unregistration. Always decrement the refcount once ghes_edac_unregister() is called to keep the refcount sane. * The ghes_pvt pointer is handed to the irq handler before registration finished. * The mci structure could be freed while the irq handler is running. Fix this by adding a mutex to ghes_edac_register(). This mutex serializes instances to register and unregister. The refcount is only increased if the registration succeeded. This makes sure the refcount is in a consistent state after registering or unregistering a device. Note: A spinlock cannot be used here as the code section may sleep. The ghes_pvt is protected by ghes_lock now. This ensures the pointer is not updated before registration was finished or while the irq handler is running. It is unset before unregistering the device including necessary (implicit) memory barriers making the changes visible to other CPUs. Thus, the device can not be used anymore by an interrupt. Also, rename ghes_init to ghes_refcount for better readability and switch to refcount API. A refcount is needed because there can be multiple GHES structures being defined (see ACPI 6.3 specification, 18.3.2.7 Generic Hardware Error Source, "Some platforms may describe multiple Generic Hardware Error Source structures with different notification types, ..."). Another approach to use the mci's device refcount (get_device()) and have a release function does not work here. A release function will be called only for device_release() with the last put_device() call. The device must be deleted *before* that with device_del(). This is only possible by maintaining an own refcount. [ bp: touchups. ] Fixes: 0fe5f281 ("EDAC, ghes: Model a single, logical memory controller") Fixes: 1e72e673 ("EDAC/ghes: Fix Use after free in ghes_edac remove path") Co-developed-by:
-
- 06 Nov, 2019 5 commits
-
-
Yazen Ghannam authored
Return early before checking for ECC if the node does not have any populated memory. Free any cached hardware data before returning. Also, return 0 in this case since this is not a failure. Other nodes may have memory and the module should attempt to load an instance for them. Move printing of hardware information to after the instance is initialized, so that the information is only printed for nodes with memory. Return an error code when ECC is disabled. This check happens after checking for memory. The module should explicitly fail to load if memory is populated on a node and ECC is disabled. Signed-off-by:
Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by:
-
Yazen Ghannam authored
...now that the data is available earlier. Signed-off-by:
-
Yazen Ghannam authored
The maximum number of memory controllers is fixed within a family/model group. In most cases, this has been fixed at 2, but some systems may have up to 8. The struct amd64_family_type already contains family/model-specific information, and this can be used rather than adding model checks to various functions. Create a new field in struct amd64_family_type for max_mcs. Set this when setting other family type information, and use this when needing the maximum number of memory controllers possible for a system. Signed-off-by:
-
Yazen Ghannam authored
Split out gathering hardware information from init_one_instance() into a separate function hw_info_get(). This is necessary so that the information can be cached earlier and used to check if memory is populated and if ECC is enabled on a node. Also, define a function hw_info_put() to back out changes made in hw_info_get(). Check for an allocated PCI device (Function 0 for Family 17h or Function 1 for pre-Family 17h) before freeing, since hw_info_put() may be called before PCI siblings are reserved. Drop the family check when freeing pvt->umc. This will be NULL on pre-Family 17h systems. However, kfree() is safe and will check for a NULL pointer before freeing. Signed-off-by:
-
Yazen Ghannam authored
The struct amd64_family_type doesn't change between multiple nodes and instances of the module, so make it global. Signed-off-by:
-
- 25 Oct, 2019 1 commit
-
-
Yazen Ghannam authored
The following commit introduced a warning on error reports without a non-zero grain value. 3724ace5 ("EDAC/mc: Fix grain_bits calculation") The amd64_edac_mod module does not provide a value, so the warning will be given on the first reported memory error. Set the grain per DIMM to cacheline size (64 bytes). This is the current recommendation. Fixes: 3724ace5 ("EDAC/mc: Fix grain_bits calculation") Signed-off-by:
-
- 24 Oct, 2019 1 commit
-
-
Markus Elfring authored
Simplify this function implementation by using a known wrapper function. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
Joel Stanley <joel@jms.id.au> Cc: Andrew Jeffery <andrew@aj.id.au> Cc: James Morse <james.morse@arm.com> Cc: kernel-janitors@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-aspeed@lists.ozlabs.org Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Robert Richter <rrichter@marvell.com> Cc: Stefan Schaeckeler <sschaeck@cisco.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/baabb9e9-a1b2-3a04-9fb6-aa632de5f722@web.de
-
- 18 Oct, 2019 2 commits
-
-
Tony Luck authored
Skylake logs some additional useful information in per-channel registers in addition the the architectural status/addr/misc logged in the machine check bank. Pick up this information and add it to the EDAC log: retry_rd_err_[five 32-bit register values] Sorry, no definitions for these registers. OEMs and DIMM vendors will be able to use them to isolate which cells in the DIMM are causing problems. correrrcnt[per rank corrected error counts] Note that if additional errors are logged while these registers are being read, you may see a jumble of values some from earlier errors, others from later errors (since the registers report the most recent logged error). The correrrcnt registers provide error counts per possible rank. If these counts only change by one since the previous error logged for this channel, then it is safe to assume that the registers logged provide a coherent view of one error. With this change EDAC logs look like this: EDAC MC4: 1 CE memory read error on CPU_SrcID#2_MC#0_Chan#1_DIMM#0 (channel:1 slot:0 page:0x8f26018 offset:0x0 grain:32 syndrome:0x0 - err_code:0x0101:0x0091 socket:2 imc:0 rank:0 bg:0 ba:0 row:0x1f880 col:0x200 retry_rd_err_log[0001a209 00000000 00000001 04800001 0001f880] correrrcnt[0001 0000 0000 0000 0000 0000 0000 0000]) Acked-by:
Aristeu Rozanski <aris@redhat.com> Signed-off-by:
Tony Luck <tony.luck@intel.com>
-
Tony Luck authored
Simplifies the code a little. Acked-by:
-
- 17 Oct, 2019 2 commits
-
-
Borislav Petkov authored
Pick up urgent change into next queue. Signed-off-by: -
James Morse authored
ghes_edac models a single logical memory controller, and uses a global ghes_init variable to ensure only the first ghes_edac_register() will do anything. ghes_edac is registered the first time a GHES entry in the HEST is probed. There may be multiple entries, so subsequent attempts to register ghes_edac are silently ignored as the work has already been done. When a GHES entry is unregistered, it calls ghes_edac_unregister(), which free()s the memory behind the global variables in ghes_edac. But there may be multiple GHES entries, the next call to ghes_edac_unregister() will dereference the free()d memory, and attempt to free it a second time. This may also be triggered on a platform with one GHES entry, if the driver is unbound/re-bound and unbound. The re-bind step will do nothing because of ghes_init, the second unbind will then do the same work as the first. Doing the unregister work on the first call is unsafe, as another CPU may be processing a notification in ghes_edac_report_mem_error(), using the memory we are about to free. ghes_init is already half of the reference counting. We only need to do the register work for the first call, and the unregister work for the last. Add the unregister check. This means we no longer free ghes_edac's memory while there are GHES entries that may receive a notification. This was detected by KASAN and DEBUG_TEST_DRIVER_REMOVE. [ bp: merge into a single patch. ] Fixes: 0fe5f281 ("EDAC, ghes: Model a single, logical memory controller") Reported-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
- 09 Oct, 2019 1 commit
-
-
Hanna Hawa authored
Make the main workhorse the "count" functions which can log a @count of errors. Have the current APIs edac_device_handle_{ce,ue}() call the _count() variants and this way keep the exported symbols number unchanged. [ bp: Rewrite. ] Signed-off-by:Hanna Hawa <hhhawa@amazon.com> Signed-off-by:
-
- 30 Sep, 2019 14 commits
-
-
Mauro Carvalho Chehab authored
drivers/edac/skx_common.c: In function ‘skx_mce_output_error’: drivers/edac/skx_common.c:478:8: warning: variable ‘type’ set but not used [-Wunused-but-set-variable] 478 | char *type, *optype; | ^~~~ Acked-by:
Borislav Petkov <bp@alien8.de> Acked-by:
-
Mauro Carvalho Chehab authored
There are several vars unused on this driver, probably because it was a modified copy of another driver. Get rid of them. drivers/edac/sb_edac.c: In function ‘knl_get_dimm_capacity’: drivers/edac/sb_edac.c:1343:16: warning: variable ‘sad_size’ set but not used [-Wunused-but-set-variable] 1343 | u64 sad_base, sad_size, sad_limit = 0; | ^~~~~~~~ drivers/edac/sb_edac.c: In function ‘sbridge_mce_output_error’: drivers/edac/sb_edac.c:2955:8: warning: variable ‘type’ set but not used [-Wunused-but-set-variable] 2955 | char *type, *optype, msg[256]; | ^~~~ drivers/edac/sb_edac.c: In function ‘sbridge_unregister_mci’: drivers/edac/sb_edac.c:3203:22: warning: variable ‘pvt’ set but not used [-Wunused-but-set-variable] 3203 | struct sbridge_pvt *pvt; | ^~~ At top level: drivers/edac/sb_edac.c:266:18: warning: ‘correrrthrsld’ defined but not used [-Wunused-const-variable=] 266 | static const u32 correrrthrsld[] = { | ^~~~~~~~~~~~~ drivers/edac/sb_edac.c:257:18: warning: ‘correrrcnt’ defined but not used [-Wunused-const-variable=] 257 | static const u32 correrrcnt[] = { | ^~~~~~~~~~ Acked-by: -
Mauro Carvalho Chehab authored
There are several temporary unused vars: drivers/edac/i5400_edac.c: In function ‘i5400_get_mc_regs’: drivers/edac/i5400_edac.c:1058:6: warning: variable ‘maxdimmperch’ set but not used [-Wunused-but-set-variable] 1058 | int maxdimmperch; | ^~~~~~~~~~~~ drivers/edac/i5400_edac.c:1057:6: warning: variable ‘maxch’ set but not used [-Wunused-but-set-variable] 1057 | int maxch; | ^~~~~ drivers/edac/i5400_edac.c: In function ‘i5400_init_dimms’: drivers/edac/i5400_edac.c:1174:6: warning: variable ‘max_dimms’ set but not used [-Wunused-but-set-variable] 1174 | int max_dimms; | ^~~~~~~~~ drivers/edac/i5400_edac.c:1173:14: warning: variable ‘channel_count’ set but not used [-Wunused-but-set-variable] 1173 | int ndimms, channel_count; | ^~~~~~~~~~~~~ Get rid of them. Acked-by:
-
Mauro Carvalho Chehab authored
There are 3 types of non-recoverable errors that the MC reports: - Fatal; - Non-fatal uncorrected - Non-fatal correctable While we don't add it to the log itself, it could be useful to have this at least for debug messages. This shuts up this warning: drivers/edac/i5400_edac.c: In function ‘i5400_proccess_non_recoverable_info’: drivers/edac/i5400_edac.c:524:8: warning: variable ‘type’ set but not used [-Wunused-but-set-variable] 524 | char *type = NULL; | ^~~~ Acked-by:
-
Mauro Carvalho Chehab authored
The declaration of the kerneldoc entry is wrong, causing this warning: drivers/edac/i7300_edac.c:824: warning: Function parameter or member 'mir_no' not described in 'decode_mir' Acked-by:
-
Mauro Carvalho Chehab authored
One var was renamed, but the associated kernel-doc markup still points to the old name. Acked-by:
-
Mauro Carvalho Chehab authored
As reported by GCC with W=1: drivers/edac/i5100_edac.c:714:16: warning: variable ‘et’ set but not used [-Wunused-but-set-variable] 714 | unsigned long et; | ^~ It sounds some left over from some code before the addition of an udelay(). Acked-by:
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: "A bunch of fixes that accumulated in recent weeks, mostly material for stable. Summary: - fix for regression from 5.3 that prevents to use balance convert with single profile - qgroup fixes: rescan race, accounting leak with multiple writers, potential leak after io failure recovery - fix for use after free in relocation (reported by KASAN) - other error handling fixups" * tag 'for-5.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: qgroup: Fix reserved data space leak if we have multiple reserve calls btrfs: qgroup: Fix the wrong target io_tree when freeing reserved data space btrfs: Fix a regression which we can't convert to SINGLE profile btrfs: relocation: fix use-after-free on dead relocation roots Btrfs: fix race setting up and completing qgroup rescan workers Btrfs: fix missing error return if writeback for extent buffer never started btrfs: adjust dirty_metadata_bytes after writeback failure of extent buffer Btrfs: fix selftests failure due to uninitialized i_mode in test inodes -
git://github.com/c-sky/csky-linuxLinus Torvalds authored
Pull csky updates from Guo Ren: "This round of csky subsystem just some fixups: - Fix mb() synchronization problem - Fix dma_alloc_coherent with PAGE_SO attribute - Fix cache_op failed when cross memory ZONEs - Optimize arch_sync_dma_for_cpu/device with dma_inv_range - Fix ioremap function losing - Fix arch_get_unmapped_area() implementation - Fix defer cache flush for 610 - Support kernel non-aligned access - Fix 610 vipt cache flush mechanism - Fix add zero_fp fixup perf backtrace panic - Move static keyword to the front of declaration - Fix csky_pmu.max_period assignment - Use generic free_initrd_mem() - entry: Remove unneeded need_resched() loop" * tag 'csky-for-linus-5.4-rc1' of git://github.com/c-sky/csky-linux: csky: Move static keyword to the front of declaration csky: entry: Remove unneeded need_resched() loop csky: Fixup csky_pmu.max_period assignment csky: Fixup add zero_fp fixup perf backtrace panic csky: Use generic free_initrd_mem() csky: Fixup 610 vipt cache flush mechanism csky: Support kernel non-aligned access csky: Fixup defer cache flush for 610 csky: Fixup arch_get_unmapped_area() implementation csky: Fixup ioremap function losing csky: Optimize arch_sync_dma_for_cpu/device with dma_inv_range csky/dma: Fixup cache_op failed when cross memory ZONEs csky: Fixup dma_alloc_coherent with PAGE_SO attribute csky: Fixup mb() synchronization problem
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "A few fixes that have trickled in through the merge window: - Video fixes for OMAP due to panel-dpi driver removal - Clock fixes for OMAP that broke no-idle quirks + nfsroot on DRA7 - Fixing arch version on ASpeed ast2500 - Two fixes for reset handling on ARM SCMI" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: aspeed: ast2500 is ARMv6K reset: reset-scmi: add missing handle initialisation firmware: arm_scmi: reset: fix reset_state assignment in scmi_domain_reset bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle() ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux ARM: dts: am3517-evm: Fix missing video ARM: dts: logicpd-torpedo-baseboard: Fix missing video ARM: omap2plus_defconfig: Fix missing video bus: ti-sysc: Fix handling of invalid clocks bus: ti-sysc: Fix clock handling for no-idle quirks
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: "A few more tracing fixes: - Fix a buffer overflow by checking nr_args correctly in probes - Fix a warning that is reported by clang - Fix a possible memory leak in error path of filter processing - Fix the selftest that checks for failures, but wasn't failing - Minor clean up on call site output of a memory trace event" * tag 'trace-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: selftests/ftrace: Fix same probe error test mm, tracing: Print symbol name for call_site in trace events tracing: Have error path in predicate_parse() free its allocated memory tracing: Fix clang -Wint-in-bool-context warnings in IF_ASSIGN macro tracing/probe: Fix to check the difference of nr_args before adding probe
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull more MMC updates from Ulf Hansson: "A couple more updates/fixes for MMC: - sdhci-pci: Add Genesys Logic GL975x support - sdhci-tegra: Recover loss in throughput for DMA - sdhci-of-esdhc: Fix DMA bug" * tag 'mmc-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: host: sdhci-pci: Add Genesys Logic GL975x support mmc: tegra: Implement ->set_dma_mask() mmc: sdhci: Let drivers define their DMA mask mmc: sdhci-of-esdhc: set DMA snooping based on DMA coherence mmc: sdhci: improve ADMA error reporting
-
Krzysztof Wilczynski authored
Move the static keyword to the front of declaration of csky_pmu_of_device_ids, and resolve the following compiler warning that can be seen when building with warnings enabled (W=1): arch/csky/kernel/perf_event.c:1340:1: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] Signed-off-by:
Krzysztof Wilczynski <kw@linux.com> Signed-off-by:
Guo Ren <guoren@kernel.org>
-
