- 29 Mar, 2014 21 commits
-
-
Zhao Qiang authored
The at8031 can work on polling mode and interrupt mode. Add ack_interrupt and config intr funcs to enable interrupt mode for it. Signed-off-by:
Zhao Qiang <B45475@freescale.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wang Yufen authored
ERROR: "(foo*)" should be "(foo *)" ERROR: "foo * bar" should be "foo *bar" Suggested-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
Wang Yufen <wangyufen@huawei.com> Acked-by:
-
Wang Yufen authored
ERROR: open brace '{' following enum go on the same line ERROR: open brace '{' following struct go on the same line ERROR: trailing statements should be on next line Signed-off-by: -
Wang Yufen authored
WARNING: please, no space before tabs WARNING: please, no spaces at the start of a line ERROR: spaces required around that ':' (ctx:VxW) ERROR: spaces required around that '>' (ctx:VxV) ERROR: spaces required around that '>=' (ctx:VxV) Signed-off-by:
-
David S. Miller authored
Eric W. Biederman says: ==================== netpoll: Cleanups and fixes This should be a small set of safe cleanups and fixes to netpoll. The fixes are vlan headers are now always inserted when needed, and napi polling is always avoided when network devices are closed. There are a bunch of little cleanups removing unnecessary code, fixing function naming, not taking unnecessary locks and removing general silliness. ==================== Signed-off-by: -
Eric W. Biederman authored
Stop taking the transmit lock when a network device has specified NETIF_F_LLTX. If no locks needed to trasnmit a packet this is the ideal scenario for netpoll as all packets can be trasnmitted immediately. Even if some locks are needed in ndo_start_xmit skipping any unnecessary serialization is desirable for netpoll as it makes it more likely a debugging packet may be trasnmitted immediately instead of being deferred until later. Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
Remove the assumption that the skbs that make it to netpoll_send_skb_on_dev are allocated with find_skb, such that skb->users == 1 and nothing is attached that would prevent the skbs from being freed from hard irq context. Remove this assumption by replacing __kfree_skb on error paths with dev_kfree_skb_irq (in hard irq context) and kfree_skb (in process context). Signed-off-by:
-
Eric W. Biederman authored
The netpoll_rx_enable and netpoll_rx_disable functions have always controlled polling the network drivers transmit and receive queues. Rename them to netpoll_poll_enable and netpoll_poll_disable to make their functionality clear. Signed-off-by:
-
Eric W. Biederman authored
Today netpoll_rx_enable and netpoll_rx_disable are called from dev_close and and __dev_close, and not from dev_close_many. Move the calls into __dev_close_many so that we have a single call site to maintain, and so that dev_close_many gains this protection as well. Which importantly makes batched network device deletes safe. Signed-off-by:
-
Eric W. Biederman authored
Factor out the code that needs to surround ndo_start_xmit from netpoll_send_skb_on_dev into netpoll_start_xmit. It is an unfortunate fact that as the netpoll code has been maintained the primary call site ndo_start_xmit learned how to handle vlans and timestamps but the second call of ndo_start_xmit in queue_process did not. With the introduction of netpoll_start_xmit this associated logic now happens at both call sites of ndo_start_xmit and should make it easy for that to continue into the future. Signed-off-by:
-
Eric W. Biederman authored
The gfp parameter was added in: commit 47be03a2 Author: Amerigo Wang <amwang@redhat.com> Date: Fri Aug 10 01:24:37 2012 +0000 netpoll: use GFP_ATOMIC in slave_enable_netpoll() and __netpoll_setup() slave_enable_netpoll() and __netpoll_setup() may be called with read_lock() held, so should use GFP_ATOMIC to allocate memory. Eric suggested to pass gfp flags to __netpoll_setup(). Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Cong Wang <amwang@redhat.com> Signed-off-by:
Ding Tianhong <dingtianhong@huawei.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
-
David S. Miller authored
Francois Romieu says: ==================== remove open-coded skb_cow_head. As per http://marc.info/?l=linux-netdev&m=139440579104701. ==================== Signed-off-by:
-
françois romieu authored
Signed-off-by:
Francois Romieu <romieu@fr.zoreil.com> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by:
-
françois romieu authored
Signed-off-by:
-
françois romieu authored
Signed-off-by:
-
françois romieu authored
Signed-off-by:
-
françois romieu authored
Signed-off-by:
-
françois romieu authored
Signed-off-by:
-
françois romieu authored
Signed-off-by:
-
françois romieu authored
Signed-off-by:
-
Thomas Petazzoni authored
The mvneta driver currently uses of_iomap(), which has two drawbacks: it doesn't request the resource, and it isn't devm-style so some error handling is needed. This commit switches to use devm_ioremap_resource() instead, which automatically requests the resource (so the I/O registers region shows up properly in /proc/iomem), and also is devm-style, which allows to get rid of some error handling to unmap the I/O registers region. Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
-
- 28 Mar, 2014 19 commits
-
-
Eric Dumazet authored
Dropping packets in __dev_queue_xmit() when transmit queue is stopped (NIC TX ring buffer full or BQL limit reached) currently outputs a syslog message. It would be better to get a precise count of such events available in netdevice stats so that monitoring tools can have a clue. This extends the work done in caf586e5 ("net: add a core netdev->rx_dropped counter") Signed-off-by:
-
Daniel Borkmann authored
Quite often it can be useful to test with dummy or similar devices as a blackhole sink for skbs. Such devices are only equipped with a single txq, but marked as NETIF_F_LLTX as they do not require locking their internal queues on xmit (or implement locking themselves). Therefore, rather use HARD_TX_{UN,}LOCK API, so that NETIF_F_LLTX will be respected. trafgen mmap/TX_RING example against dummy device with config foo: { fill(0xff, 64) } results in the following performance improvements for such scenarios on an ordinary Core i7/2.80GHz: Before: Performance counter stats for 'trafgen -i foo -o du0 -n100000000' (10 runs): 160,975,944,159 instructions:k # 0.55 insns per cycle ( +- 0.09% ) 293,319,390,278 cycles:k # 0.000 GHz ( +- 0.35% ) 192,501,104 branch-misses:k ( +- 1.63% ) 831 context-switches:k ( +- 9.18% ) 7 cpu-migrations:k ( +- 7.40% ) 69,382 cache-misses:k # 0.010 % of all cache refs ( +- 2.18% ) 671,552,021 cache-references:k ( +- 1.29% ) 22.856401569 seconds time elapsed ( +- 0.33% ) After: Performance counter stats for 'trafgen -i foo -o du0 -n100000000' (10 runs): 133,788,739,692 instructions:k # 0.92 insns per cycle ( +- 0.06% ) 145,853,213,256 cycles:k # 0.000 GHz ( +- 0.17% ) 59,867,100 branch-misses:k ( +- 4.72% ) 384 context-switches:k ( +- 3.76% ) 6 cpu-migrations:k ( +- 6.28% ) 70,304 cache-misses:k # 0.077 % of all cache refs ( +- 1.73% ) 90,879,408 cache-references:k ( +- 1.35% ) 11.719372413 seconds time elapsed ( +- 0.24% ) Signed-off-by:Daniel Borkmann <dborkman@redhat.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Daniel Borkmann authored
As in xmit path we merely update statistics and free the skb, we can mark the device with LLTX feature, so that upper layers can avoid taking the single txq lock on xmit. While at it, also add missing NETIF_F_SG. Signed-off-by:
-
Hariprasad Shenai authored
Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
-
Hariprasad Shenai authored
Signed-off-by:
-
David S. Miller authored
Or Gerlitz says: ==================== Implement vxlan ndo calls This short series adds support for the vxlan ndo calls, the udp port is programmed to the firmware using a new command we introduce here which is called "config device". ==================== Signed-off-by: -
Or Gerlitz authored
Add implementation for the add/del vxlan port ndo calls, using the CONFIG_DEV firmware command. Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Or Gerlitz authored
Introduce the CONFIG_DEV firmware command which we will use to configure the UDP port assumed by the firmware for the VXLAN offloads. Signed-off-by:
-
Or Gerlitz authored
When a VF issues a firmware command which is disallowed for them, the PF rerturns -EPERM from that command wrapper. Move to use one such wrapper instance, instead of repeating the same code on such commands. Signed-off-by:
-
Yuval Mintz authored
Commit 2dc33bbc "bnx2x: Remove the sriov VFOP mechanism" introduced a possible memory leak on the error flow during multicast filters configuration. Reported-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by:
-
Ben Dooks authored
The pm_rumtime work queue is causing the device to be suspended during initialisation, thus the initialisation may not be able to access registers properly. As the code is called from a work queue, it is possible that this is not seen from certain configurations/builds due to the asynchronos nature of the code. Another issue has also been found where the network device registration calls back into the driver thus causing further pm_runtime calls that also caused issues with the MDIO bus code. This has now been checked and is the only place the MDIO can be called without the device open. Use pm_runtime_get_sync() and pm_runtime_put() to ensure that the pm system does not suspend it during the probe() call and remove the now unnecessary pm_runtime_resume() call. Also add a call in the error path to call pm_runtime_disable(). This fixes the external abort that can cause /sbin/init or other such init processed to die. Signed-off-by:
Ben Dooks <ben.dooks@codethink.co.uk> Tested-by:
Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Dinh Nguyen authored
Like the STi and sunxi series SOCs, Altera's SOCFPGA also needs a glue layer on top of the Synopsys gmac IP. This patch adds the platform driver for the glue layer which configures the IP before the generic STMMAC driver takes over. Signed-off-by:
Dinh Nguyen <dinguyen@altera.com> Signed-off-by:
-
Yann Droneaud authored
If kmalloc() fails in c4iw_alloc_ucontext(), the function leaves but does not set an error code in ret variable: it will return 0 to the caller. This patch set ret to -ENOMEM in such case. Cc: Steve Wise <swise@opengridcomputing.com> Cc: Steve Wise <swise@chelsio.com> Signed-off-by:
Yann Droneaud <ydroneaud@opteya.com> Acked-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
-
David S. Miller authored
Erik Hugne says: ==================== tipc: fix handling of NETDEV_CHANGEADDR event Aside from manual reconfiguration of the netdevice hwaddr, this can also be changed automatically for an interface bond in active-backup mode if fail_over_mac is enabled. This patchset fixes the handling of this event in TIPC by properly updating the l2 media address for the bearer, followed by a reinitialization of the node discovery mechanism. ==================== Signed-off-by: -
Erik Hugne authored
The node discovery domain is assigned when a bearer is enabled. In the previous commit we reflect this attribute directly in the bearer structure since it's needed to reinitialize the node discovery mechanism after a hardware address change. There's no need to replicate this attribute anywhere else, so we remove it from the tipc_link_req structure. Signed-off-by:
Erik Hugne <erik.hugne@ericsson.com> Reviewed-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
Erik Hugne authored
If the hardware address of a underlying netdevice is changed, it is not enough to simply reset the bearer/links over this device. We also need to reflect this change in the TIPC bearer and node discovery structures aswell. This patch adds the necessary reinitialization of the node disovery mechanism following a hardware address change so that the correct originating media address is advertised in the discovery messages. Signed-off-by:
Dong Liu <dliu.cn@gmail.com> Reviewed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-nextDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates This series contains updates to e1000e, igb, i40e and i40evf Anjali provides i40e fix to remove the ATR filter on RST as well as FIN packets. Cleans up add_del_fdir() because it was used and implemented only for the add, so change the name and drop a parameter. Adds the ability to drop a flow if we wanted to and adds a flow director message level to be used for flow director specific messages. Mitch fixes an issue on i40evf where the Tx watchdog handler was causing an oops when sending an admin queue message to request a reset because the admin queue functions use spinlocks. Greg provides a change to i40e to make the alloc and free queue vector calls orthogonal. Shannon fixes i40e to verify the eeprom checksum and firmware CRC status bits, and shutdown the driver if they fail. This change stops the processing of traffic, but does not kill the PF netdev so that the NVMUpdate process still has a chance at fixing the image. Also provides a fix to make sure the VSI has a netdev before trying to use it in the debugfs netdev_ops commands. Jakub Kicinski provides patches for e1000e and igb to fix a number issues found in the PTP code. v2: - drop patch 11 "i40e: Add a fallback debug flow for the driver" from the series based on feedback from David Miller ==================== Signed-off-by: -
Byungho An authored
This fixes following: drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c:1828 sxgbe_hw_init() error: potential null dereference 'priv->hw'. (kmalloc returns null) Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Byungho An <bh74.an@samsung.com> Signed-off-by:
-
Byungho An authored
This fixes followings: sparse warnings: (new ones prefixed by >>) >> drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c:197:5: sparse: symbol 'sxgbe_platform_freeze' was not declared. Should it be static? >> drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c:204:5: sparse: symbol 'sxgbe_platform_restore' was not declared. Should it be static? >> drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c:228:24: sparse: symbol 'sxgbe_platform_driver' was not declared. Should it be static? >> drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c:1795:6: sparse: symbol 'sxgbe_get_ops' was not declared. Should it be static? Reported-by:
-
