- 03 Jul, 2014 2 commits
-
-
James Bottomley authored
-
Martin K. Petersen authored
Commit 8846bab1 introduced a helper that can be used to query the wire transfer size for a SCSI command taking protection information into account. However, some commands do not have a 1:1 mapping between the block range they work on and the payload size (discard, write same). After the scatterlist has been set up these requests use __data_len to store the number of bytes to report completion on. This means that callers of scsi_transfer_length() would get the wrong byte count for these types of requests. To overcome this we make scsi_transfer_length() use the scatterlist length in the scsi_data_buffer as basis for the wire transfer calculation instead of __data_len. Reported-by:
Christoph Hellwig <hch@infradead.org> Debugged-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Sagi Grimberg <sagig@mellanox.com> Fixes: d77e6535 Cc: stable@vger.kernel.org Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
- 25 Jun, 2014 12 commits
-
-
Paolo Bonzini authored
Even though the virtio-scsi spec guarantees that all requests related to the TMF will have been completed by the time the TMF itself completes, the request queue's callback might not have run yet. This causes requests to be completed more than once, and as a result triggers a variety of BUGs or oopses. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Reviewed-by:
Venkatesh Srinivas <venkateshs@google.com> Cc: stable@vger.kernel.org Signed-off-by:
Christoph Hellwig <hch@lst.de>
-
Paolo Bonzini authored
Calling the workqueue interface on uninitialized work items isn't a good idea even if they're zeroed. It's not failing catastrophically only through happy accidents. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Reviewed-by:
Stefan Hajnoczi <stefanha@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Christoph Hellwig <hch@lst.de>
-
Brian King authored
Add a memory barrier prior to sending a new command to the VIOS to ensure the VIOS does not receive stale data in the command buffer. Also add a memory barrier when processing the CRQ for completed commands. Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Acked-by:
Nathan Fontenot <nfont@linux.vnet.ibm.com> Cc: stable@vger.kernel.org Signed-off-by:
Christoph Hellwig <hch@lst.de>
-
Brian King authored
If a CRQ reset is triggered for some reason while in the middle of performing VSCSI adapter initialization, we don't want to call the done function for the initialization MAD commands as this will only result in two threads attempting initialization at the same time, resulting in failures. Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Acked-by:
Nathan Fontenot <nfont@linux.vnet.ibm.com> Cc: stable@vger.kernel.org Signed-off-by:
Christoph Hellwig <hch@lst.de>
-
Quinn Tran authored
Signed-off-by:
Quinn Tran <quinn.tran@qlogic.com> Signed-off-by:
Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by:
Christoph Hellwig <hch@lst.de>
-
Neil Horman authored
Recently had this warning reported: [ 290.489047] Call Trace: [ 290.489053] [<ffffffff8169efec>] dump_stack+0x19/0x1b [ 290.489055] [<ffffffff810ac7a9>] __might_sleep+0x179/0x230 [ 290.489057] [<ffffffff816a4ad5>] mutex_lock_nested+0x55/0x520 [ 290.489061] [<ffffffffa01b9905>] ? bnx2fc_l2_rcv_thread+0xc5/0x4c0 [bnx2fc] [ 290.489065] [<ffffffffa0174c1a>] fc_vport_id_lookup+0x3a/0xa0 [libfc] [ 290.489068] [<ffffffffa01b9a6c>] bnx2fc_l2_rcv_thread+0x22c/0x4c0 [bnx2fc] [ 290.489070] [<ffffffffa01b9840>] ? bnx2fc_vport_destroy+0x110/0x110 [bnx2fc] [ 290.489073] [<ffffffff8109e0cd>] kthread+0xed/0x100 [ 290.489075] [<ffffffff8109dfe0>] ? insert_kthread_work+0x80/0x80 [ 290.489077] [<ffffffff816b2fec>] ret_from_fork+0x7c/0xb0 [ 290.489078] [<ffffffff8109dfe0>] ? insert_kthread_work+0x80/0x80 Its due to the fact that we call a potentially sleeping function from the bnx2fc rcv path with preemption disabled (via the get_cpu call embedded in the per-cpu variable stats lookup in bnx2fc_l2_rcv_thread. Easy enough fix, we can just move the stats collection later in the function where we are sure we won't preempt or sleep. This also allows us to not have to enable pre-emption when doing a per-cpu lookup, since we're certain not to get rescheduled. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Eddie Wai <eddie.wai@broadcom.com> Signed-off-by:
Christoph Hellwig <hch@lst.de>
-
Maurizio Lombardi authored
In case of of error, the bnx2fc_cmd_mgr_alloc() function will call the bnx2fc_cmd_mgr_free() to perform the cleanup. The problem is that in one case the latter may try to scan some not-yet initialized lists, resulting in a kernel panic. This patch prevents this from happening by freeing the lists before calling bnx2fc_cmd_mgr_free(). Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Acked-by:
Eddie Wai <eddie.wai@broadcom.com> Signed-off-by:
Christoph Hellwig <hch@lst.de>
-
Neil Horman authored
debugfs caught this: WARNING: at lib/debugobjects.c:260 debug_print_object+0x83/0xa0() ODEBUG: free active (active state 0) object type: work_struct hint: fc_scsi_scan_rport+0x0/0xd0 [scsi_transport_fc] CPU: 1 PID: 184 Comm: kworker/1:1 Tainted: G W -------------- 3.10.0-123.el7.x86_64.debug #1 Hardware name: HP ProLiant DL120 G7, BIOS J01 07/01/2013 Workqueue: fc_wq_5 fc_rport_final_delete [scsi_transport_fc] Call Trace: [<ffffffff8169efec>] dump_stack+0x19/0x1b [<ffffffff8106cbd1>] warn_slowpath_common+0x61/0x80 [<ffffffff8106cc4c>] warn_slowpath_fmt+0x5c/0x80 [<ffffffff8133e003>] debug_print_object+0x83/0xa0 [<ffffffffa04e2f40>] ? fc_parse_wwn+0x100/0x100 [<ffffffff8133f23b>] debug_check_no_obj_freed+0x22b/0x270 [<ffffffffa04e127e>] ? fc_rport_dev_release+0x1e/0x30 [<ffffffff811db3e9>] kfree+0xd9/0x2d0 [<ffffffffa04e127e>] fc_rport_dev_release+0x1e/0x30 [<ffffffff81428032>] device_release+0x32/0xa0 [<ffffffff8132701e>] kobject_release+0x7e/0x1b0 [<ffffffff81326ed8>] kobject_put+0x28/0x60 [<ffffffff81428397>] put_device+0x17/0x20 [<ffffffffa04e5025>] fc_rport_final_delete+0x165/0x210 [<ffffffff810959b0>] process_one_work+0x220/0x710 [<ffffffff81095944>] ? process_one_work+0x1b4/0x710 [<ffffffff81095fbb>] worker_thread+0x11b/0x3a0 [<ffffffff81095ea0>] ? process_one_work+0x710/0x710 [<ffffffff8109e0cd>] kthread+0xed/0x100 [<ffffffff8109dfe0>] ? insert_kthread_work+0x80/0x80 [<ffffffff816b2fec>] ret_from_fork+0x7c/0xb0 [<ffffffff8109dfe0>] ? insert_kthread_work+0x80/0x80 Seems to be because the scan_work work_struct might be active when the housing fc_rport struct gets freed. Ensure that we cancel it prior to freeing the rport Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Reviewed-by:
Vasu Dev <vasu.dev@intel.com> Reviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Christoph Hellwig <hch@lst.de>
-
Maurizio Lombardi authored
The pm8001_get_phy_settings_info() function does not check the kzalloc() return value and does not free the allocated memory. Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Acked-by:
Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Acked-by:
Jack Wang <xjtuwjp@gmail.com> Signed-off-by:
Christoph Hellwig <hch@lst.de>
-
Reddy, Sreekanth authored
Updating maintainers Email Ids for the entry LSILOGIC MPT FUSION DRIVERS in MAINTAINERS file Signed-off-by:
Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Signed-off-by:
Christoph Hellwig <hch@lst.de>
-
Tomas Henzl authored
commit 0e7c60cb [SCSI] be2iscsi: fix memory leak in error path fixed an potential junk pointer free if mgmt_get_if_info() returned an error fix it on one more place Signed-off-by:
Tomas Henzl <thenzl@redhat.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
Christoph Hellwig <hch@lst.de>
-
Tomas Henzl authored
a jump to 'free_memory' is apparently missing Signed-off-by:
Tomas Henzl <thenzl@redhat.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
Christoph Hellwig <hch@lst.de>
-
- 24 Jun, 2014 3 commits
-
-
Hannes Reinecke authored
Any callbacks in scsi_timeout_out() might return BLK_EH_RESET_TIMER, in which case we should leave the result alone and not set DID_TIME_OUT, as the command didn't actually timeout. Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Ewan D. Milne <emilne@redhat.com>
-
Ulrich Obergfell authored
After scsi_try_to_abort_cmd returns, the eh_abort_handler may have already found that the command has completed in the device, causing the host_byte to be nonzero (e.g. it could be DID_ABORT). When this happens, ORing DID_TIME_OUT into the host byte will corrupt the result field and initiate an unwanted command retry. Fix this by using set_host_byte instead, following the model of commit 2082ebc4. Cc: stable@vger.kernel.org Signed-off-by:
Ulrich Obergfell <uobergfe@redhat.com> [Fix all instances according to review comments. - Paolo] Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Ewan D. Milne <emilne@redhat.com> Reviewed-by:
Hannes Reinecke <hare@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pull compress bugfixes from Greg KH: "Here are two bugfixes for some compression functions that resolve some errors when uncompressing some pathalogical data. Both were found by Don A Bailey" * tag 'compress-3.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: lz4: ensure length does not wrap lzo: properly check for overruns
-
- 23 Jun, 2014 23 commits
-
-
Linus Torvalds authored
Merge fixes from Andrew Morton: "The nmi patch and watchdog patch aren't actually fixes - they're features which needed a few last-minutes touchups. Otherwise, a rather large batch of fixes - ocfs2 review takes a while and I got distracted and missed last week's batch" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (31 commits) ocfs2/dlm: do not purge lockres that is queued for assert master ocfs2: do not return DLM_MIGRATE_RESPONSE_MASTERY_REF to avoid endless,loop during umount ocfs2: manually do the iput once ocfs2_add_entry failed in ocfs2_symlink and ocfs2_mknod ocfs2: fix a tiny race when running dirop_fileop_racer ocfs2/dlm: fix misuse of list_move_tail() in dlm_run_purge_list() ocfs2: refcount: take rw_lock in ocfs2_reflink ocfs2: revert "ocfs2: fix NULL pointer dereference when dismount and ocfs2rec simultaneously" ocfs2: fix deadlock when two nodes are converting same lock from PR to EX and idletimeout closes conn ocfs2: should add inode into orphan dir after updating entry in ocfs2_rename() mm: fix crashes from mbind() merging vmas checkpatch: reduce false positives when checking void function return statements ia64: arch/ia64/include/uapi/asm/fcntl.h needs personality.h DMA, CMA: fix possible memory leak slab: fix oops when reading /proc/slab_allocators shmem: fix faulting into a hole while it's punched mm: let mm_find_pmd fix buggy race with THP fault mm: thp: fix DEBUG_PAGEALLOC oops in copy_page_rep() kernel/watchdog.c: print traces for all cpus on lockup detection nmi: provide the option to issue an NMI back trace to every cpu but current Documentation/accounting/getdelays.c: add missing null-terminate after strncpy call ...
-
Xue jiufei authored
When workqueue is delayed, it may occur that a lockres is purged while it is still queued for master assert. it may trigger BUG() as follows. N1 N2 dlm_get_lockres() ->dlm_do_master_requery is the master of lockres, so queue assert_master work dlm_thread() start running and purge the lockres dlm_assert_master_worker() send assert master message to other nodes receiving the assert_master message, set master to N2 dlmlock_remote() send create_lock message to N2, but receive DLM_IVLOCKID, if it is RECOVERY lockres, it triggers the BUG(). Another BUG() is triggered when N3 become the new master and send assert_master to N1, N1 will trigger the BUG() because owner doesn't match. So we should not purge lockres when it is queued for assert master. Signed-off-by:
joyce.xue <xuejiufei@huawei.com> Reviewed-by:
Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
jiangyiwen authored
The following case may lead to endless loop during umount. node A node B node C node D umount volume, migrate lockres1 to B want to lock lockres1, send MASTER_REQUEST_MSG to C init block mle send MIGRATE_REQUEST_MSG to C find a block mle, and then return DLM_MIGRATE_RESPONSE_MASTERY_REF to B set C in refmap umount successfully try to umount, endless loop occurs when migrate lockres1 since C is in refmap So we can fix this endless loop case by only returning DLM_MIGRATE_RESPONSE_MASTERY_REF if it has a mastery mle when receiving MIGRATE_REQUEST_MSG. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
jiangyiwen <jiangyiwen@huawei.com> Reviewed-by:
Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Xue jiufei <xuejiufei@huawei.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
jiangyiwen authored
When the call to ocfs2_add_entry() failed in ocfs2_symlink() and ocfs2_mknod(), iput() will not be called during dput(dentry) because no d_instantiate(), and this will lead to umount hung. Signed-off-by:
jiangyiwen <jiangyiwen@huawei.com> Cc: Joel Becker <jlbec@evilplan.org> Reviewed-by:
Mark Fasheh <mfasheh@suse.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Yiwen Jiang authored
When running dirop_fileop_racer we found a dead lock case. 2 nodes, say Node A and Node B, mount the same ocfs2 volume. Create /race/16/1 in the filesystem, and let the inode number of dir 16 is less than the inode number of dir race. Node A Node B mv /race/16/1 /race/ right after Node A has got the EX mode of /race/16/, and tries to get EX mode of /race ls /race/16/ In this case, Node A has got the EX mode of /race/16/, and wants to get EX mode of /race/. Node B has got the PR mode of /race/, and wants to get the PR mode of /race/16/. Since EX and PR are mutually exclusive, dead lock happens. This patch fixes this case by locking in ancestor order before trying inode number order. Signed-off-by:
Yiwen Jiang <jiangyiwen@huawei.com> Signed-off-by:
Joseph Qi <joseph.qi@huawei.com> Cc: Joel Becker <jlbec@evilplan.org> Reviewed-by:
Mark Fasheh <mfasheh@suse.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Xue jiufei authored
When a lockres in purge list but is still in use, it should be moved to the tail of purge list. dlm_thread will continue to check next lockres in purge list. However, code list_move_tail(&dlm->purge_list, &lockres->purge) will do *no* movements, so dlm_thread will purge the same lockres in this loop again and again. If it is in use for a long time, other lockres will not be processed. Signed-off-by:
Yiwen Jiang <jiangyiwen@huawei.com> Signed-off-by:
joyce.xue <xuejiufei@huawei.com> Reviewed-by:
Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Wengang Wang authored
This patch tries to fix this crash: #5 [ffff88003c1cd690] do_invalid_op at ffffffff810166d5 #6 [ffff88003c1cd730] invalid_op at ffffffff8159b2de [exception RIP: ocfs2_direct_IO_get_blocks+359] RIP: ffffffffa05dfa27 RSP: ffff88003c1cd7e8 RFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff88003c1cdaa8 RCX: 0000000000000000 RDX: 000000000000000c RSI: ffff880027a95000 RDI: ffff88003c79b540 RBP: ffff88003c1cd858 R8: 0000000000000000 R9: ffffffff815f6ba0 R10: 00000000000001c9 R11: 00000000000001c9 R12: ffff88002d271500 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000001000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffff88003c1cd860] do_direct_IO at ffffffff811cd31b #8 [ffff88003c1cd950] direct_IO_iovec at ffffffff811cde9c #9 [ffff88003c1cd9b0] do_blockdev_direct_IO at ffffffff811ce764 #10 [ffff88003c1cdb80] __blockdev_direct_IO at ffffffff811ce7cc #11 [ffff88003c1cdbb0] ocfs2_direct_IO at ffffffffa05df756 [ocfs2] #12 [ffff88003c1cdbe0] generic_file_direct_write_iter at ffffffff8112f935 #13 [ffff88003c1cdc40] ocfs2_file_write_iter at ffffffffa0600ccc [ocfs2] #14 [ffff88003c1cdd50] do_aio_write at ffffffff8119126c #15 [ffff88003c1cddc0] aio_rw_vect_retry at ffffffff811d9bb4 #16 [ffff88003c1cddf0] aio_run_iocb at ffffffff811db880 #17 [ffff88003c1cde30] io_submit_one at ffffffff811dc238 #18 [ffff88003c1cde80] do_io_submit at ffffffff811dc437 #19 [ffff88003c1cdf70] sys_io_submit at ffffffff811dc530 #20 [ffff88003c1cdf80] system_call_fastpath at ffffffff8159a159 It crashes at BUG_ON(create && (ext_flags & OCFS2_EXT_REFCOUNTED)); in ocfs2_direct_IO_get_blocks. ocfs2_direct_IO_get_blocks is expecting the OCFS2_EXT_REFCOUNTED be removed in ocfs2_prepare_inode_for_write() if it was there. But no cluster lock is taken during the time before (or inside) ocfs2_prepare_inode_for_write() and after ocfs2_direct_IO_get_blocks(). It can happen in this case: Node A(which crashes) Node B ------------------------ --------------------------- ocfs2_file_aio_write ocfs2_prepare_inode_for_write ocfs2_inode_lock ... ocfs2_inode_unlock #no refcount found .... ocfs2_reflink ocfs2_inode_lock ... ocfs2_inode_unlock #now, refcount flag set on extent ... flush change to disk ocfs2_direct_IO_get_blocks ocfs2_get_clusters #extent map miss #buffer_head miss read extents from disk found refcount flag on extent crash.. Fix: Take rw_lock in ocfs2_reflink path Signed-off-by:
Wengang Wang <wen.gang.wang@oracle.com> Reviewed-by:
Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Xue jiufei authored
75f82eaa ("ocfs2: fix NULL pointer dereference when dismount and ocfs2rec simultaneously") may cause umount hang while shutting down truncate log. The situation is as followes: ocfs2_dismout_volume -> ocfs2_recovery_exit -> free osb->recovery_map -> ocfs2_truncate_shutdown -> lock global bitmap inode -> ocfs2_wait_for_recovery -> check whether osb->recovery_map->rm_used is zero Because osb->recovery_map is already freed, rm_used can be any other values, so it may yield umount hang. Signed-off-by:
joyce.xue <xuejiufei@huawei.com> Reviewed-by:
Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Tariq Saeed authored
ocfs2: fix deadlock when two nodes are converting same lock from PR to EX and idletimeout closes conn Orabug: 18639535 Two node cluster and both nodes hold a lock at PR level and both want to convert to EX at the same time. Master node 1 has sent BAST and then closes the connection due to idletime out. Node 0 receives BAST, sends unlock req with cancel flag but gets error -ENOTCONN. The problem is this error is ignored in dlm_send_remote_unlock_request() on the **incorrect** assumption that the master is dead. See NOTE in comment why it returns DLM_NORMAL. Upon getting DLM_NORMAL, node 0 proceeds to sends convert (without cancel flg) which fails with -ENOTCONN. waits 5 sec and resends. This time gets DLM_IVLOCKID from the master since lock not found in grant, it had been moved to converting queue in response to conv PR->EX req. No way out. Node 1 (master) Node 0 ============== ====== lock mode PR PR convert PR -> EX mv grant -> convert and que BAST ... <-------- convert PR -> EX convert que looks like this: ((node 1, PR -> EX) (node 0, PR -> EX)) ... BAST (want PR -> NL) ------------------> ... idle timout, conn closed ... In response to BAST, sends unlock with cancel convert flag gets -ENOTCONN. Ignores and sends remote convert request gets -ENOTCONN, waits 5 Sec, retries ... reconnects <----------------- convert req goes through on next try does not find lock on grant que status DLM_IVLOCKID ------------------> ... No way out. Fix is to keep retrying unlock with cancel flag until it succeeds or the master dies. Signed-off-by:
Tariq Saeed <tariq.x.saeed@oracle.com> Reviewed-by:
Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
alex chen authored
There are two files a and b in dir /mnt/ocfs2. node A node B mv a b In ocfs2_rename(), after calling ocfs2_orphan_add(), the inode of file b will be added into orphan dir. If ocfs2_update_entry() fails, ocfs2_rename return error and mv operation fails. But file b still exists in the parent dir. ocfs2_queue_orphan_scan -> ocfs2_queue_recovery_completion -> ocfs2_complete_recovery -> ocfs2_recover_orphans The inode of the file b will be put with iput(). ocfs2_evict_inode -> ocfs2_delete_inode -> ocfs2_wipe_inode -> ocfs2_remove_inode OCFS2_VALID_FL in the inode i_flags will be cleared. The file b still can be accessed on node B. ls /mnt/ocfs2 When first read the file b with ocfs2_read_inode_block(). It will validate the inode using ocfs2_validate_inode_block(). Because OCFS2_VALID_FL not set in the inode i_flags, so the file system will be readonly. So we should add inode into orphan dir after updating entry in ocfs2_rename(). Signed-off-by:
alex.chen <alex.chen@huawei.com> Reviewed-by:
Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
In v2.6.34 commit 9d8cebd4 ("mm: fix mbind vma merge problem") introduced vma merging to mbind(), but it should have also changed the convention of passing start vma from queue_pages_range() (formerly check_range()) to new_vma_page(): vma merging may have already freed that structure, resulting in BUG at mm/mempolicy.c:1738 and probably worse crashes. Fixes: 9d8cebd4 ("mm: fix mbind vma merge problem") Reported-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Tested-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
Hugh Dickins <hughd@google.com> Acked-by:
Christoph Lameter <cl@linux.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: <stable@vger.kernel.org> [2.6.34+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Joe Perches authored
The previous patch had a few too many false positives on styles that should be acceptable. Signed-off-by:
Joe Perches <joe@perches.com> Tested-by:
Anish Bhatt <anish@chelsio.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
fs/notify/fanotify/fanotify_user.c: In function 'SYSC_fanotify_init': fs/notify/fanotify/fanotify_user.c:726: error: implicit declaration of function 'personality' fs/notify/fanotify/fanotify_user.c:726: error: 'PER_LINUX32' undeclared (first use in this function) fs/notify/fanotify/fanotify_user.c:726: error: (Each undeclared identifier is reported only once fs/notify/fanotify/fanotify_user.c:726: error: for each function it appears in.) Reported-by:
Wu Fengguang <fengguang.wu@intel.com> Cc: Will Woods <wwoods@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: <stable@vger.kernel.org> [3.15.x] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Joonsoo Kim authored
We should free memory for bitmap when we find zone mismatch, otherwise this memory will leak. Additionally, I copy code comment from PPC KVM's CMA code to inform why we need to check zone mis-match. Signed-off-by:
Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by:
Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Reviewed-by:
Michal Nazarewicz <mina86@mina86.com> Reviewed-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by:
Minchan Kim <minchan@kernel.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: Alexander Graf <agraf@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Joonsoo Kim authored
Commit b1cb0982 ("change the management method of free objects of the slab") introduced a bug on slab leak detector ('/proc/slab_allocators'). This detector works like as following decription. 1. traverse all objects on all the slabs. 2. determine whether it is active or not. 3. if active, print who allocate this object. but that commit changed the way how to manage free objects, so the logic determining whether it is active or not is also changed. In before, we regard object in cpu caches as inactive one, but, with this commit, we mistakenly regard object in cpu caches as active one. This intoduces kernel oops if DEBUG_PAGEALLOC is enabled. If DEBUG_PAGEALLOC is enabled, kernel_map_pages() is used to detect who corrupt free memory in the slab. It unmaps page table mapping if object is free and map it if object is active. When slab leak detector check object in cpu caches, it mistakenly think this object active so try to access object memory to retrieve caller of allocation. At this point, page table mapping to this object doesn't exist, so oops occurs. Following is oops message reported from Dave. It blew up when something tried to read /proc/slab_allocators (Just cat it, and you should see the oops below) Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Modules linked in: [snip...] CPU: 1 PID: 9386 Comm: trinity-c33 Not tainted 3.14.0-rc5+ #131 task: ffff8801aa46e890 ti: ffff880076924000 task.ti: ffff880076924000 RIP: 0010:[<ffffffffaa1a8f4a>] [<ffffffffaa1a8f4a>] handle_slab+0x8a/0x180 RSP: 0018:ffff880076925de0 EFLAGS: 00010002 RAX: 0000000000001000 RBX: 0000000000000000 RCX: 000000005ce85ce7 RDX: ffffea00079be100 RSI: 0000000000001000 RDI: ffff880107458000 RBP: ffff880076925e18 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 000000000000000f R12: ffff8801e6f84000 R13: ffffea00079be100 R14: ffff880107458000 R15: ffff88022bb8d2c0 FS: 00007fb769e45740(0000) GS:ffff88024d040000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff8801e6f84ff8 CR3: 00000000a22db000 CR4: 00000000001407e0 DR0: 0000000002695000 DR1: 0000000002695000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000070602 Call Trace: leaks_show+0xce/0x240 seq_read+0x28e/0x490 proc_reg_read+0x3d/0x80 vfs_read+0x9b/0x160 SyS_read+0x58/0xb0 tracesys+0xd4/0xd9 Code: f5 00 00 00 0f 1f 44 00 00 48 63 c8 44 3b 0c 8a 0f 84 e3 00 00 00 83 c0 01 44 39 c0 72 eb 41 f6 47 1a 01 0f 84 e9 00 00 00 89 f0 <4d> 8b 4c 04 f8 4d 85 c9 0f 84 88 00 00 00 49 8b 7e 08 4d 8d 46 RIP handle_slab+0x8a/0x180 To fix the problem, I introduce an object status buffer on each slab. With this, we can track object status precisely, so slab leak detector would not access active object and no kernel oops would occur. Memory overhead caused by this fix is only imposed to CONFIG_DEBUG_SLAB_LEAK which is mainly used for debugging, so memory overhead isn't big problem. Signed-off-by:
Joonsoo Kim <iamjoonsoo.kim@lge.com> Reported-by:
Dave Jones <davej@redhat.com> Reported-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by:
Vladimir Davydov <vdavydov@parallels.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
Trinity finds that mmap access to a hole while it's punched from shmem can prevent the madvise(MADV_REMOVE) or fallocate(FALLOC_FL_PUNCH_HOLE) from completing, until the reader chooses to stop; with the puncher's hold on i_mutex locking out all other writers until it can complete. It appears that the tmpfs fault path is too light in comparison with its hole-punching path, lacking an i_data_sem to obstruct it; but we don't want to slow down the common case. Extend shmem_fallocate()'s existing range notification mechanism, so shmem_fault() can refrain from faulting pages into the hole while it's punched, waiting instead on i_mutex (when safe to sleep; or repeatedly faulting when not). [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Hugh Dickins <hughd@google.com> Reported-by:
Sasha Levin <sasha.levin@oracle.com> Tested-by:
Sasha Levin <sasha.levin@oracle.com> Cc: Dave Jones <davej@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
Trinity has reported: BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: __lock_acquire (kernel/locking/lockdep.c:3070 (discriminator 1)) CPU: 6 PID: 16173 Comm: trinity-c364 Tainted: G W 3.15.0-rc1-next-20140415-sasha-00020-gaa90d09 #398 lock_acquire (arch/x86/include/asm/current.h:14 kernel/locking/lockdep.c:3602) _raw_spin_lock (include/linux/spinlock_api_smp.h:143 kernel/locking/spinlock.c:151) remove_migration_pte (mm/migrate.c:137) rmap_walk (mm/rmap.c:1628 mm/rmap.c:1699) remove_migration_ptes (mm/migrate.c:224) migrate_pages (mm/migrate.c:922 mm/migrate.c:960 mm/migrate.c:1126) migrate_misplaced_page (mm/migrate.c:1733) __handle_mm_fault (mm/memory.c:3762 mm/memory.c:3812 mm/memory.c:3925) handle_mm_fault (mm/memory.c:3948) __get_user_pages (mm/memory.c:1851) __mlock_vma_pages_range (mm/mlock.c:255) __mm_populate (mm/mlock.c:711) SyS_mlockall (include/linux/mm.h:1799 mm/mlock.c:817 mm/mlock.c:791) I believe this comes about because, whereas collapsing and splitting THP functions take anon_vma lock in write mode (which excludes concurrent rmap walks), faulting THP functions (write protection and misplaced NUMA) do not - and mostly they do not need to. But they do use a pmdp_clear_flush(), set_pmd_at() sequence which, for an instant (indeed, for a long instant, given the inter-CPU TLB flush in there), leaves *pmd neither present not trans_huge. Which can confuse a concurrent rmap walk, as when removing migration ptes, seen in the dumped trace. Although that rmap walk has a 4k page to insert, anon_vmas containing THPs are in no way segregated from 4k-page anon_vmas, so the 4k-intent mm_find_pmd() does need to cope with that instant when a trans_huge pmd is temporarily absent. I don't think we need strengthen the locking at the THP end: it's easily handled with an ACCESS_ONCE() before testing both conditions. And since mm_find_pmd() had only one caller who wanted a THP rather than a pmd, let's slightly repurpose it to fail when it hits a THP or non-present pmd, and open code split_huge_page_address() again. Signed-off-by:
Hugh Dickins <hughd@google.com> Reported-by:
Sasha Levin <sasha.levin@oracle.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Lameter <cl@gentwo.org> Cc: Dave Jones <davej@redhat.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
Trinity has for over a year been reporting a CONFIG_DEBUG_PAGEALLOC oops in copy_page_rep() called from copy_user_huge_page() called from do_huge_pmd_wp_page(). I believe this is a DEBUG_PAGEALLOC false positive, due to the source page being split, and a tail page freed, while copy is in progress; and not a problem without DEBUG_PAGEALLOC, since the pmd_same() check will prevent a miscopy from being made visible. Fix by adding get_user_huge_page() and put_user_huge_page(): reducing to the usual get_page() and put_page() on head page in the usual config; but get and put references to all of the tail pages when DEBUG_PAGEALLOC. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Hugh Dickins <hughd@google.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by:
Sasha Levin <sasha.levin@oracle.com> Tested-by:
Sasha Levin <sasha.levin@oracle.com> Cc: Dave Jones <davej@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Aaron Tomlin authored
A 'softlockup' is defined as a bug that causes the kernel to loop in kernel mode for more than a predefined period to time, without giving other tasks a chance to run. Currently, upon detection of this condition by the per-cpu watchdog task, debug information (including a stack trace) is sent to the system log. On some occasions, we have observed that the "victim" rather than the actual "culprit" (i.e. the owner/holder of the contended resource) is reported to the user. Often this information has proven to be insufficient to assist debugging efforts. To avoid loss of useful debug information, for architectures which support NMI, this patch makes it possible to improve soft lockup reporting. This is accomplished by issuing an NMI to each cpu to obtain a stack trace. If NMI is not supported we just revert back to the old method. A sysctl and boot-time parameter is available to toggle this feature. [dzickus@redhat.com: add CONFIG_SMP in certain areas] [akpm@linux-foundation.org: additional CONFIG_SMP=n optimisations] [mq@suse.cz: fix warning] Signed-off-by:
Aaron Tomlin <atomlin@redhat.com> Signed-off-by:
Don Zickus <dzickus@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Jan Moskyto Matejka <mq@suse.cz> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Aaron Tomlin authored
Sometimes it is preferred not to use the trigger_all_cpu_backtrace() routine when one wants to avoid capturing a back trace for current. For instance if one was previously captured recently. This patch provides a new routine namely trigger_allbutself_cpu_backtrace() which offers the flexibility to issue an NMI to every cpu but current and capture a back trace accordingly. Patch x86 and sparc to support new routine. [dzickus@redhat.com: add stub in #else clause] [dzickus@redhat.com: don't print message in single processor case, wrap with get/put_cpu based on Oleg's suggestion] [sfr@canb.auug.org.au: undo C99ism] Signed-off-by:
Aaron Tomlin <atomlin@redhat.com> Signed-off-by:
Don Zickus <dzickus@redhat.com> Acked-by:
David S. Miller <davem@davemloft.net> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Rickard Strandqvist authored
Added a guaranteed null-terminate after call to strncpy. This was partly found using a static code analysis program called cppcheck. Signed-off-by:
Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Acked-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Micky Ching authored
Add cancel_work_sync() in rtsx_pci_ms_drv_remove() to cancel pending request work when removing the driver. Signed-off-by:
Micky Ching <micky_ching@realsil.com.cn> Cc: Samuel Ortiz <sameo@linux.intel.com> says: Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alex Dubov <oakad@yahoo.com> Cc: Roger Tseng <rogerable@realtek.com> Cc: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Rientjes authored
Oleg reports a division by zero error on zero-length write() to the percpu_pagelist_fraction sysctl: divide error: 0000 [#1] SMP DEBUG_PAGEALLOC CPU: 1 PID: 9142 Comm: badarea_io Not tainted 3.15.0-rc2-vm-nfs+ #19 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff8800d5aeb6e0 ti: ffff8800d87a2000 task.ti: ffff8800d87a2000 RIP: 0010: percpu_pagelist_fraction_sysctl_handler+0x84/0x120 RSP: 0018:ffff8800d87a3e78 EFLAGS: 00010246 RAX: 0000000000000f89 RBX: ffff88011f7fd000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000010 RBP: ffff8800d87a3e98 R08: ffffffff81d002c8 R09: ffff8800d87a3f50 R10: 000000000000000b R11: 0000000000000246 R12: 0000000000000060 R13: ffffffff81c3c3e0 R14: ffffffff81cfddf8 R15: ffff8801193b0800 FS: 00007f614f1e9740(0000) GS:ffff88011f440000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f614f1fa000 CR3: 00000000d9291000 CR4: 00000000000006e0 Call Trace: proc_sys_call_handler+0xb3/0xc0 proc_sys_write+0x14/0x20 vfs_write+0xba/0x1e0 SyS_write+0x46/0xb0 tracesys+0xe1/0xe6 However, if the percpu_pagelist_fraction sysctl is set by the user, it is also impossible to restore it to the kernel default since the user cannot write 0 to the sysctl. This patch allows the user to write 0 to restore the default behavior. It still requires a fraction equal to or larger than 8, however, as stated by the documentation for sanity. If a value in the range [1, 7] is written, the sysctl will return EINVAL. This successfully solves the divide by zero issue at the same time. Signed-off-by:
David Rientjes <rientjes@google.com> Reported-by:
Oleg Drokin <green@linuxhacker.ru> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-