- 01 Mar, 2019 5 commits
-
-
Mauro Carvalho Chehab authored
Use codespell to fix lots of typos over frontends. Manually verified to avoid false-positives. Signed-off-by:Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Mauro Carvalho Chehab authored
Use codespell to fix lots of typos over frontends. Manually verified to avoid false-positives. Signed-off-by: -
Mauro Carvalho Chehab authored
Use codespell to fix lots of typos over frontends. Manually verified to avoid false-positives. Signed-off-by: -
Rui Miguel Silva authored
Remove code that is not called anywhere, just remove the internal ops. Signed-off-by:
Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Sean Young authored
When an rc device is created, we do not know what key codes it will support, since a new keymap might be loaded at some later point. So, we set all keybit in the input device. The uevent for the input device includes all the key codes, of which there are now 768. This overflows the size of the uevent (UEVENT_BUFFER_SIZE) and no event is generated. Revert for now until we figure out a different solution. This reverts commit fec225a0. Cc: <stable@vger.kernel.org> # 4.20+ Reported-by:
Christian Holpert <christian@holpert.de> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
- 19 Feb, 2019 5 commits
-
-
Mauro Carvalho Chehab authored
Some kernel-doc markups are wrong. fix them. Signed-off-by: -
Mauro Carvalho Chehab authored
There are lots of warnings produced by this driver. It is not as much as atomisp, but it is still a lot. So, use the same solution to hide most of them. Those need to be fixed before promoting it out of staging, so add it at the TODO list. Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/staging/media/imx/imx7-media-csi.c: In function 'imx7_csi_enum_mbus_code': drivers/staging/media/imx/imx7-media-csi.c:926:33: warning: variable 'in_cc' set but not used [-Wunused-but-set-variable] const struct imx_media_pixfmt *in_cc; ^~~~~ Signed-off-by: -
Mauro Carvalho Chehab authored
if imx7_csi_try_fmt() fails, outcc variable won't be initialized and csi->cc[IMX7_CSI_PAD_SRC] would be pointing to a random location. Signed-off-by: -
Hans Verkuil authored
Commit 5964cbd8 ("imx: Set capture compose rectangle in capture_device_set_format") broke the compilation of commit 05f63404 ("staging/imx7: add imx7 CSI subdev driver"). These patches came in through different pull requests and nobody noticed that the first changed functions that the second relied upon. Update imx7-media-csi.c accordingly. Signed-off-by:
-
- 18 Feb, 2019 30 commits
-
-
Rui Miguel Silva authored
Add maintainer entry for the imx7 media csi, mipi csis driver, dt-bindings and documentation. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Rui Miguel Silva authored
Add non vendor bayer formats to the allowed format array. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Acked-by:
-
Rui Miguel Silva authored
Add some i.MX7 related entries to TODO file. Signed-off-by:
-
Mauro Carvalho Chehab authored
Sphinx didn't like the code-blocks on this file: Documentation/media/v4l-drivers/imx7.rst:19: WARNING: Inline substitution_reference start-string without end-string. Documentation/media/v4l-drivers/imx7.rst:20: WARNING: Block quote ends without a blank line; unexpected unindent. Documentation/media/v4l-drivers/imx7.rst:27: WARNING: Inline substitution_reference start-string without end-string. Documentation/media/v4l-drivers/imx7.rst:79: WARNING: Error in "code-block" directive: maximum 1 argument(s) allowed, 26 supplied. .. code-block:: none # Setup links <snip/> media-ctl -V "'csi':0 [fmt:SBGGR10_1X10/800x600 field:none]" Documentation/media/v4l-drivers/imx7.rst:96: WARNING: Error in "code-block" directive: maximum 1 argument(s) allowed, 9 supplied. .. code-block:: none <snip/>. -> "imx7-mipi-csis.0":0 [ENABLED] Fix them, in order to match the expected syntax for code blocks. Signed-off-by: -
Rui Miguel Silva authored
Add rst document to describe the i.MX7 media driver and also a working example from the Warp7 board usage with a OV2680 sensor. Signed-off-by:
-
Rui Miguel Silva authored
Adds MIPI CSI-2 subdev for i.MX7 to connect with sensors with a MIPI CSI-2 interface. Signed-off-by:
-
Rui Miguel Silva authored
This add the media entity subdevice and control driver for the i.MX7 CMOS Sensor Interface. Signed-off-by:
-
Rui Miguel Silva authored
Add bindings documentation for i.MX7 media drivers. The imx7 MIPI CSI2 and imx7 CMOS Sensor Interface. Signed-off-by:
Rob Herring <robh@kernel.org> Acked-by:
-
Rui Miguel Silva authored
Some imx system do not have IPU, so prepare the imx media drivers to support this kind of devices. Rename the group ids to include an _IPU_ prefix, add a new group id to support systems with only a CSI without IPU, and also rename the create internal links to make it clear that only systems with IPU have internal subdevices. Signed-off-by:
-
Rui Miguel Silva authored
Refactor and move media device initialization code to a new common module, so it can be used by other devices, this will allow for example a near to introduce imx7 CSI driver, to use this media device. Signed-off-by:
-
Patrick Lerda authored
smipcie: switch to RC_DRIVER_IR_RAW. Signed-off-by:
Patrick Lerda <patrick9876@free.fr> Signed-off-by:
-
Matthias Reichl authored
The Zotac RC2604323/01G and RC2604329/02BG remotes use the 32-bit rc6 protocol and toggle bit 15 (0x8000) on repeated button presses, like MCE remotes. Add the customer code 0x80340000 to the 32-bit rc6 toggle handling code to get proper scancodes and toggle reports. Signed-off-by:
Matthias Reichl <hias@horus.com> Signed-off-by:
-
Patrick Lerda authored
media: add support for RCMM infrared remote controls. Signed-off-by:
-
Akinobu Mita authored
The runtime PM of this device is enabled after v4l2_ctrl_handler_setup(), and this makes this device's runtime PM usage count a negative value. The ov7740_set_ctrl() tries to do something only if the device's runtime PM usage counter is nonzero. ov7740_set_ctrl() { if (!pm_runtime_get_if_in_use(&client->dev)) return 0; <do something>; pm_runtime_put(&client->dev); return ret; } However, the ov7740_set_ctrl() is called by v4l2_ctrl_handler_setup() while the runtime PM of this device is not yet enabled. In this case, the pm_runtime_get_if_in_use() returns -EINVAL (!= 0). Therefore we can't bail out of this function and the usage count is decreased by pm_runtime_put() without increment. This fixes this problem by enabling the runtime PM of this device before v4l2_ctrl_handler_setup() so that the ov7740_set_ctrl() is always called when the runtime PM is enabled. Cc: Wenyou Yang <wenyou.yang@microchip.com> Signed-off-by:Akinobu Mita <akinobu.mita@gmail.com> Tested-by:
Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by:
-
Dafna Hirschfeld authored
Add a flag 'FWHT_FL_I_FRAME' that indicates that this is an I-frame. This requires incrementing to version 3 This flag is needed for the upcoming stateless FWHT decoder since it has to know if an encoded frame is an I or a P frame. Signed-off-by:
Dafna Hirschfeld <dafna3@gmail.com> [hverkuil-cisco@xs4all.nl: added the last paragraph of the commit msg] Signed-off-by:
-
Paul Kocialkowski authored
Since there's a v4l2_m2m_get_vq helper, use it instead of accessing the queue directly, which slightly increases readability. Also reformat the code using the queue a bit while at it. Signed-off-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
-
Paul Kocialkowski authored
Check that our queues are not busy before setting the format or return EBUSY if that's the case. This ensures that our format can't change once buffers are allocated for the queue. Signed-off-by:
-
Colin Ian King authored
The check to see if type is V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE is redundant as this has been already checked at the start of the function and if it's not that value then -ENOSYS is returned. Hence the sprintf can be replaced by a simpler string copy. Detected by CoverityScan, CID#1309450 ("Logically dead code") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Ezequiel Garcia authored
This commit changes the return type of mem2mem buffer handling API. Namely, these functions: v4l2_m2m_next_buf v4l2_m2m_last_buf v4l2_m2m_buf_remove v4l2_m2m_next_src_buf v4l2_m2m_next_dst_buf v4l2_m2m_last_src_buf v4l2_m2m_last_dst_buf v4l2_m2m_src_buf_remove v4l2_m2m_dst_buf_remove which currently return void pointer. In every case, the actual return type is a struct vb2_v4l2_buffer pointer. Change the return type of the listed functions, so type checking can be properly used. Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
-
Ezequiel Garcia authored
Fix the assigned type of mem2mem buffer handling API. Namely, these functions: v4l2_m2m_next_buf v4l2_m2m_last_buf v4l2_m2m_buf_remove v4l2_m2m_next_src_buf v4l2_m2m_next_dst_buf v4l2_m2m_last_src_buf v4l2_m2m_last_dst_buf v4l2_m2m_src_buf_remove v4l2_m2m_dst_buf_remove return a struct vb2_v4l2_buffer, and not a struct vb2_buffer. Fixing this is necessary to fix the mem2mem buffer handling API, changing the return to the correct struct vb2_v4l2_buffer instead of a void pointer. Signed-off-by:
-
Ezequiel Garcia authored
Fix the assigned type of mem2mem buffer handling API. Namely, these functions: v4l2_m2m_next_buf v4l2_m2m_last_buf v4l2_m2m_buf_remove v4l2_m2m_next_src_buf v4l2_m2m_next_dst_buf v4l2_m2m_last_src_buf v4l2_m2m_last_dst_buf v4l2_m2m_src_buf_remove v4l2_m2m_dst_buf_remove return a struct vb2_v4l2_buffer, and not a struct vb2_buffer. Fixing this is necessary to fix the mem2mem buffer handling API, changing the return to the correct struct vb2_v4l2_buffer instead of a void pointer. Signed-off-by:
-
Ezequiel Garcia authored
Fix the assigned type of mem2mem buffer handling API. Namely, these functions: v4l2_m2m_next_buf v4l2_m2m_last_buf v4l2_m2m_buf_remove v4l2_m2m_next_src_buf v4l2_m2m_next_dst_buf v4l2_m2m_last_src_buf v4l2_m2m_last_dst_buf v4l2_m2m_src_buf_remove v4l2_m2m_dst_buf_remove return a struct vb2_v4l2_buffer, and not a struct vb2_buffer. Fixing this is necessary to fix the mem2mem buffer handling API, changing the return to the correct struct vb2_v4l2_buffer instead of a void pointer. Signed-off-by:
-
Ezequiel Garcia authored
Fix the assigned type of mem2mem buffer handling API. Namely, these functions: v4l2_m2m_next_buf v4l2_m2m_last_buf v4l2_m2m_buf_remove v4l2_m2m_next_src_buf v4l2_m2m_next_dst_buf v4l2_m2m_last_src_buf v4l2_m2m_last_dst_buf v4l2_m2m_src_buf_remove v4l2_m2m_dst_buf_remove return a struct vb2_v4l2_buffer, and not a struct vb2_buffer. Fixing this is necessary to fix the mem2mem buffer handling API, changing the return to the correct struct vb2_v4l2_buffer instead of a void pointer. Signed-off-by:
-
Ezequiel Garcia authored
Fix the assigned type of mem2mem buffer handling API. Namely, these functions: v4l2_m2m_next_buf v4l2_m2m_last_buf v4l2_m2m_buf_remove v4l2_m2m_next_src_buf v4l2_m2m_next_dst_buf v4l2_m2m_last_src_buf v4l2_m2m_last_dst_buf v4l2_m2m_src_buf_remove v4l2_m2m_dst_buf_remove return a struct vb2_v4l2_buffer, and not a struct vb2_buffer. Fixing this is necessary to fix the mem2mem buffer handling API, changing the return to the correct struct vb2_v4l2_buffer instead of a void pointer. Signed-off-by:
-
Ezequiel Garcia authored
Fix the assigned type of mem2mem buffer handling API. Namely, these functions: v4l2_m2m_next_buf v4l2_m2m_last_buf v4l2_m2m_buf_remove v4l2_m2m_next_src_buf v4l2_m2m_next_dst_buf v4l2_m2m_last_src_buf v4l2_m2m_last_dst_buf v4l2_m2m_src_buf_remove v4l2_m2m_dst_buf_remove return a struct vb2_v4l2_buffer, and not a struct vb2_buffer. Fixing this is necessary to fix the mem2mem buffer handling API, changing the return to the correct struct vb2_v4l2_buffer instead of a void pointer. Signed-off-by:
-
Ezequiel Garcia authored
Fix the assigned type of mem2mem buffer handling API. Namely, these functions: v4l2_m2m_next_buf v4l2_m2m_last_buf v4l2_m2m_buf_remove v4l2_m2m_next_src_buf v4l2_m2m_next_dst_buf v4l2_m2m_last_src_buf v4l2_m2m_last_dst_buf v4l2_m2m_src_buf_remove v4l2_m2m_dst_buf_remove return a struct vb2_v4l2_buffer, and not a struct vb2_buffer. Fixing this is necessary to fix the mem2mem buffer handling API, changing the return to the correct struct vb2_v4l2_buffer instead of a void pointer. Signed-off-by:
-
Ezequiel Garcia authored
Fix the assigned type of mem2mem buffer handling API. Namely, these functions: v4l2_m2m_next_buf v4l2_m2m_last_buf v4l2_m2m_buf_remove v4l2_m2m_next_src_buf v4l2_m2m_next_dst_buf v4l2_m2m_last_src_buf v4l2_m2m_last_dst_buf v4l2_m2m_src_buf_remove v4l2_m2m_dst_buf_remove return a struct vb2_v4l2_buffer, and not a struct vb2_buffer. Fixing this is necessary to fix the mem2mem buffer handling API, changing the return to the correct struct vb2_v4l2_buffer instead of a void pointer. Signed-off-by:
-
Ezequiel Garcia authored
Fix the assigned type of mem2mem buffer handling API. Namely, these functions: v4l2_m2m_next_buf v4l2_m2m_last_buf v4l2_m2m_buf_remove v4l2_m2m_next_src_buf v4l2_m2m_next_dst_buf v4l2_m2m_last_src_buf v4l2_m2m_last_dst_buf v4l2_m2m_src_buf_remove v4l2_m2m_dst_buf_remove return a struct vb2_v4l2_buffer, and not a struct vb2_buffer. Fixing this is necessary to fix the mem2mem buffer handling API, changing the return to the correct struct vb2_v4l2_buffer instead of a void pointer. Signed-off-by:
-
Jacopo Mondi authored
Since the removal of the stale soc_camera headers, Migo-R board fails to build due to missing dma-mapping include directive. Include missing dma-mapping.h header in Migo-R board file to fix the build error. Fixes: a50c7738 ("media: sh: migor: Remove stale soc_camera include") Signed-off-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by:
-
Tim Harvey authored
set_edid never wrote the new EDID to state->edid.edid, it was only written to the hardware. Since get_edid returned state->edid.edid, it was never returning the right EDID. Signed-off-by:
Tim Harvey <tharvey@gateworks.com> Signed-off-by:
-
