- 18 May, 2015 14 commits
-
-
Libin Yang authored
This patch creates hda_intel_trace.h to add some pm trace functions used in hda_intel.c Signed-off-by: Libin Yang <libin.yang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Libin Yang authored
This patch does: 1. Rename the hda_intel_trace.h to hda_controller_trace.h as this trace is used in hda_controller.c 2. Add some trace function for pcm flow. Signed-off-by: Libin Yang <libin.yang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Libin Yang authored
Add the trace of snd_hdac_stream_start and snd_hdac_stream_stop. Signed-off-by: Libin Yang <libin.yang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Thierry Reding authored
Tegra210 contains a similar codec as Tegra124 and can be supported using the same patch function. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Thierry Reding authored
Tegra114 contains the same codec as Tegra124 and can be supported using the same patch function. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Thierry Reding authored
Tegra30 contains the same codec as Tegra124 and can be supported using the same patch function. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Thierry Reding authored
When probing, provide accurate error messages to help with debugging failures. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Thierry Reding authored
The HDMI codec on NVIDIA Tegra SoCs has a feature that doesn't exist on the MCP or GPU variants. The highest bit in the vendor-defined scratch registers can be used to trigger an interrupt in the HDMI codec, which is signalled to the HDMI driver. This can be used to pass information, such as the HDA format, to the HDMI driver so that it can reconfigure itself accordingly. While at it, change the name of the codec to Tegra124 since there are no other SoCs in the Tegra12x family. There isn't really a Tegra12x family. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Thierry Reding authored
This is set for the MCP variants of the NVIDIA HDA controller, which the Tegra variant was derived from. This fixes the following warning at boot time: [ 2.486610] tegra-hda 70030000.hda: CORB reset timeout#1, CORBRP = 0 Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Kailang Yang authored
Dell create new platform with ALC298 codec. This patch will enable headset mode for ALC298/ALC3266 platform. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
It's no longer a part of API but merely a local function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Just a minor refactoring, no functional changes. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The commit [c560a679: ALSA: core: Remove child proc file elements recursively] converted snd_card_proc_new() with the normal snd_info_*() call and removed snd_device chain for such info entries. However, it misses one point: the creation of the proc entry was managed by snd_device chain in the former code, and now it's also gone, which results in no proc files creation at all. Mea culpa. This patch makes snd_info_card_register() creating the all pending child proc entries in a shot. Also, since snd_card_register() might be called multiple times, this function is also changed to be callable multiple times. Along with the changes above, now the linked list of snd_info_entry is added at creation time instead of snd_info_register() for keeping eyes of pending info entries. Fixes: c560a679 ('ALSA: core: Remove child proc file elements recursively') Reported-by: "Lu, Han" <han.lu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
snd_info_free_entry() releases the all children nodes as well, but due to the wrong timing of releasing the link, the children nodes may be disconnected but left unreleased. This patch fixes it by moving the link free at the right position. Also it eases list_for_each_entry() without _safe option in snd_info_disconnect() because it no longer frees the children nodes there. Fixes: c560a679 ('ALSA: core: Remove child proc file elements recursively') Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 12 May, 2015 1 commit
-
-
Kailang Yang authored
Support headset mode for ALC298 platform. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 11 May, 2015 1 commit
-
-
David Henningsson authored
Janitorial patch (no functional change) Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 05 May, 2015 3 commits
-
-
Thierry Reding authored
Commit a41d1224 ("ALSA: hda - Embed bus into controller object") introduced a regression in the Tegra HDA driver that causes the following oops during boot: [ 2.333458] Unable to handle kernel NULL pointer dereference at virtual address 000004c4 [ 2.341537] pgd = c0004000 [ 2.344312] [000004c4] *pgd=00000000 [ 2.347898] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [ 2.353200] Modules linked in: [ 2.356264] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.1.0-rc2-next-20150505-00344-g8577890defbf #79 [ 2.366682] Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) [ 2.372939] task: ee0d8b40 ti: ee0da000 task.ti: ee0da000 [ 2.378336] PC is at azx_bus_init+0x18/0xf4 [ 2.382516] LR is at hda_tegra_probe+0x6c/0x478 [ 2.387043] pc : [<c06156c4>] lr : [<c061cf00>] psr: 60000113 [ 2.387043] sp : ee0dbe38 ip : 00000000 fp : 00000000 [ 2.398501] r10: ed874c00 r9 : 000000fd r8 : 00000000 [ 2.403717] r7 : ed874c10 r6 : 00000000 r5 : 00000000 r4 : ed016810 [ 2.410232] r3 : c08a2ad4 r2 : c08a1ea0 r1 : 00000000 r0 : ed016810 [ 2.416750] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 2.424046] Control: 10c5387d Table: 8000406a DAC: 00000015 [ 2.429783] Process swapper/0 (pid: 1, stack limit = 0xee0da210) [ 2.435778] Stack: (0xee0dbe38 to 0xee0dc000) [ 2.440129] be20: 00000000 ed016810 [ 2.448297] be40: 00000000 c061cf00 00000000 ee0dbe5c ed8735d0 c0a7bc48 ed02fd50 ed016000 [ 2.456462] be60: c1250164 ed874c10 c0c66bf8 fffffdfb 00000000 000000fd c0b8dc98 c046664c [ 2.464628] be80: c0466608 c1250164 ed874c10 00000000 c0c66bf8 c0464eb4 ed874c10 c0c66bf8 [ 2.472793] bea0: ed874c44 c0c43458 00000000 c04650d0 00000000 c0c66bf8 c046503c c04633b4 [ 2.480959] bec0: ee11bea4 ed85f390 c0c66bf8 ed017ac0 00000000 c0464634 c0ab2b7c c0c66bf8 [ 2.489125] bee0: c0bfde20 c0c66bf8 c0bfde20 ed01ce40 c0b7b414 c04656e8 c04665b0 c0bfde20 [ 2.497291] bf00: c0bfde20 c0009770 ee0d8b40 c0c02488 60000113 00000000 00000000 00000003 [ 2.505458] bf20: 00000000 c0c02488 60000113 00000000 c0b54598 c0b16a90 ef7fcc57 c0041228 [ 2.513624] bf40: c0a9150c ef7fcc5f 00000006 00000006 00000000 c0bf1fa8 c0bf2354 00000006 [ 2.521790] bf60: c0b8dc90 c0c7c000 c0c7c000 c0b8dc98 00000000 c0b54dd8 00000006 00000006 [ 2.529956] bf80: c0b54598 00000000 00000000 c07ff08c 00000000 00000000 00000000 00000000 [ 2.538122] bfa0: 00000000 c07ff094 00000000 c000f5a0 00000000 00000000 00000000 00000000 [ 2.546286] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.554451] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 fffff7ff c013f264 [ 2.562624] [<c06156c4>] (azx_bus_init) from [<c061cf00>] (hda_tegra_probe+0x6c/0x478) [ 2.570535] [<c061cf00>] (hda_tegra_probe) from [<c046664c>] (platform_drv_probe+0x44/0xa4) [ 2.578879] [<c046664c>] (platform_drv_probe) from [<c0464eb4>] (driver_probe_device+0x174/0x2b8) [ 2.587739] [<c0464eb4>] (driver_probe_device) from [<c04650d0>] (__driver_attach+0x94/0x98) [ 2.596172] [<c04650d0>] (__driver_attach) from [<c04633b4>] (bus_for_each_dev+0x6c/0xa0) [ 2.604342] [<c04633b4>] (bus_for_each_dev) from [<c0464634>] (bus_add_driver+0x148/0x1f0) [ 2.612597] [<c0464634>] (bus_add_driver) from [<c04656e8>] (driver_register+0x78/0xf8) [ 2.620593] [<c04656e8>] (driver_register) from [<c0009770>] (do_one_initcall+0x8c/0x1d4) [ 2.628765] [<c0009770>] (do_one_initcall) from [<c0b54dd8>] (kernel_init_freeable+0x144/0x1e4) [ 2.637459] [<c0b54dd8>] (kernel_init_freeable) from [<c07ff094>] (kernel_init+0x8/0xe8) [ 2.645543] [<c07ff094>] (kernel_init) from [<c000f5a0>] (ret_from_fork+0x14/0x34) This is caused by azx_bus_init() trying to dereference chip->card, which for the Tegra driver doesn't get initialized until sometime later during the call to hda_tegra_create(). Fix this by mimicking the behaviour of the Intel driver and defer HDA bus initialization until right before the call to snd_device_new(). Fixes: a41d1224 ('ALSA: hda - Embed bus into controller object') Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Lu, Han authored
In SKL, HDMI/DP codec and PCH HD Audio Controller are in different power wells, so it's necessary to reset display audio codecs when power well on, otherwise display audio codecs will disappear when resume from low power state. Reset steps when power on: enable codec wakeup -> azx_init_chip() -> disable codec wakeup The callback for codec wakeup enable/disable is in drivers/gpu/drm/i915/. Signed-off-by: Lu, Han <han.lu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Lu, Han authored
Add support for enabling codec wakeup override signal to allow re-enumeration of the controller on SKL after resume from low power state. In SKL, HDMI/DP codec and PCH HD Audio Controller are in different power wells, so it's necessary to reset display audio codecs when power well on, otherwise display audio codecs will disappear when resume from low power state. Reset steps when power on: enable codec wakeup -> azx_init_chip() -> disable codec wakeup v3 by Jani: Simplify to only support toggling the appropriate chicken bit. v4 by Han: add explanation and specify the hw swquence. Signed-off-by: Lu, Han <han.lu@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 02 May, 2015 2 commits
-
-
Takashi Iwai authored
-
Jie Yang authored
Building errors reported such as below when 'CONFIG_INPUT=m': ...undefined reference to `input_xxx'... Here change to enable SND_JACK selectively to fix the issue. Also remove the config 'SND_HDA_INPUT_JACK' which won't be used anymore. Signed-off-by: Jie Yang <yang.jie@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 30 Apr, 2015 5 commits
-
-
Takashi Iwai authored
-
Takashi Iwai authored
Another fixes for NULL jack->input_dev in some places in jack.c. Fixes: 2ba2dfa1 ('ALSA: hda - Update to use the new jack kctls method') Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Jie Yang authored
There is no input_dev for phantom jack, we should not report input event for it, otherwise, NULL pointer dereference error will occur. Fixes: 2ba2dfa1 ('ALSA: hda - Update to use the new jack kctls method') Signed-off-by: Jie Yang <yang.jie@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
-
Takashi Iwai authored
We're providing dummy functions for CONFIG_SND_HDA_i915=n, thus ifdef can be reduced. (But hda_i915_init() has to be fixed to return zero.) This automatically fixes a compile warning: sound/pci/hda/hda_intel.c: In function 'azx_probe_continue': sound/pci/hda/hda_intel.c:1966:1: warning: label 'i915_power_fail' defined but not used [-Wunused-label] Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 29 Apr, 2015 8 commits
-
-
Takashi Iwai authored
-
Mengdong Lin authored
For Baytrail (Valleyview) and Braswell (Cherryview), only the HDMI codec is in the display power well while the HD-A controller isn't. So the controller flag 'need_i915_power' is not set to release the display power after probe, and the codec flag 'link_power_control" is set to request/release the display power via bus link_power ops. Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Mengdong Lin authored
This patch can improve power saving for Intel platforms on which only the display audio codec is in the shared i915 power well: - Add a flag "need_i915_power" to indicate whether the controller needs the i915 power well. - The driver will always request the i915 power when probing the controller and codecs if AZX_DCAPS_I915_POWERWELL is set (either the controller or a codec needs this power). - If the controller needs the i915 power, the power will be held after probe until the controller is runtime suspended or S3. If the controller doesn't need the power, the power will be released the after probe, and a codec that needs the power can request/release the power via bus link_power ops. Background: - For Haswell/Broadwell, which has a separate HD-A controller for display audio, both the controller and the display codec are in the i915 power well. - For Baytrail/Braswell, the display and analog audio share the same HDA controller and link, and only the display codec is in the i915 power well. - For Skylake, the display and analog audio share the same HDA controller but use separate links. Only the display codec is in the i915 power well. And in legacy mode we take the two links as one. So it can follow Baytrail/Braswell. Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Mengdong Lin authored
This patch implements the bus link_power ops to request/release i915 display power well. It can be used by the display codec which shares this power well with GPU on Intel platforms. Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Mengdong Lin authored
A flag "link_power_control" is added to indicate whether a codec needs to control the link power. And a new bus ops link_power() is defined for the codec to request to enable/disable the link power. Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Mengdong Lin authored
This is to check the refcount of audio driver and reduce calling to i915. Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Conflicts: sound/pci/emu10k1/emu10k1_main.c Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Peter Zubaj authored
Looks like audigy emu10k2 (probably emu10k1 - sb live too) support two modes for DMA. Second mode is useful for 64 bit os with more then 2 GB of ram (fixes problems with big soundfont loading) 1) 32MB from 2 GB address space using 8192 pages (used now as default) 2) 16MB from 4 GB address space using 4096 pages Mode is set using HCFG_EXPANDED_MEM flag in HCFG register. Also format of emu10k2 page table is then different. Signed-off-by: Peter Zubaj <pzubaj@marticonet.sk> Tested-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 28 Apr, 2015 2 commits
-
-
Takashi Iwai authored
The OSS emulation in synth-emux helper has a potential AB/BA deadlock at the simultaneous closing and opening: close -> snd_seq_release() -> sne_seq_free_client() -> snd_seq_delete_all_ports(): takes client->ports_mutex -> port_delete() -> snd_emux_unuse(): takes emux->register_mutex open -> snd_seq_oss_open() -> snd_emux_open_seq_oss(): takes emux->register_mutex -> snd_seq_event_port_attach() -> snd_seq_create_port(): takes client->ports_mutex This patch addresses the deadlock by reducing the rance taking emux->register_mutex in snd_emux_open_seq_oss(). The lock is needed for the refcount handling, so move it locally. The calls in emux_seq.c are already with the mutex, thus they are replaced with the version without mutex lock/unlock. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
-
- 27 Apr, 2015 4 commits
-
-
Jie Yang authored
Add documentation describing Jack kcontrols and how to use them with HD-Audio and ASoC. Signed-off-by: Jie Yang <yang.jie@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Jie Yang authored
snd_kctl_jack_new() and snd_kctl_jack_report() are internal only now so make them static. Signed-off-by: Jie Yang <yang.jie@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Jie Yang authored
Jack kctls are now created according to the pin info. Signed-off-by: Jie Yang <yang.jie@intel.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Jie Yang authored
Jack snd_kcontrols can now be created during snd_jack_new() or by later calling snd_jack_add_new_kctls(). This patch creates the jacks during the initialisation stage for both phantom and non phantom jacks. Signed-off-by: Jie Yang <yang.jie@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-