Skip to content

L
linux
Switch branch/tag
  1. 06 Jul, 2016 14 commits
    • David Howells's avatar
      rxrpc: Split service connection code out into its own file · 7877a4a4
      David Howells authored 
      Split the service-specific connection code out into into its own file.  The
client-specific code has already been split out.  This will leave just the
common code in the original file.
Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      7877a4a4
    • David Howells's avatar
      rxrpc: Split client connection code out into its own file · c6d2b8d7
      David Howells authored 
      Split the client-specific connection code out into its own file.  It will
behave somewhat differently from the service-specific connection code, so
it makes sense to separate them.
Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      c6d2b8d7
    • David Howells's avatar
      rxrpc: Call channels should have separate call number spaces · a1399f8b
      David Howells authored 
      Each channel on a connection has a separate, independent number space from
which to allocate callNumber values.  It is entirely possible, for example,
to have a connection with four active calls, each with call number 1.

Note that the callNumber values for any particular channel don't have to
start at 1, but they are supposed to increment monotonically for that
channel from a client's perspective and may not be reused once the call
number is transmitted (until the epoch cycles all the way back round).

Currently, however, call numbers are allocated on a per-connection basis
and, further, are held in an rb-tree.  The rb-tree is redundant as the four
channel pointers in the rxrpc_connection struct are entirely capable of
pointing to all the calls currently in progress on a connection.

To this end, make the following changes:

 (1) Handle call number allocation independently per channel.

 (2) Get rid of the conn->calls rb-tree.  This is overkill as a connection
     may have a maximum of four calls in progress at any one time.  Use the
     pointers in the channels[] array instead, indexed by the channel
     number from the packet.

 (3) For each channel, save the result of the last call that was in
     progress on that channel in conn->channels[] so that the final ACK or
     ABORT packet can be replayed if necessary.  Any call earlier than that
     is just ignored.  If we've seen the next call number in a packet, the
     last one is most definitely defunct.

 (4) When generating a RESPONSE packet for a connection, the call number
     counter for each channel must be included in it.

 (5) When parsing a RESPONSE packet for a connection, the call number
     counters contained therein should be used to set the minimum expected
     call numbers on each channel.

To do in future commits:

 (1) Replay terminal packets based on the last call stored in
     conn->channels[].

 (2) Connections should be retired before the callNumber space on any
     channel runs out.

 (3) A server is expected to disregard or reject any new incoming call that
     has a call number less than the current call number counter.  The call
     number counter for that channel must be advanced to the new call
     number.

     Note that the server cannot just require that the next call that it
     sees on a channel be exactly the call number counter + 1 because then
     there's a scenario that could cause a problem: The client transmits a
     packet to initiate a connection, the network goes out, the server
     sends an ACK (which gets lost), the client sends an ABORT (which also
     gets lost); the network then reconnects, the client then reuses the
     call number for the next call (it doesn't know the server already saw
     the call number), but the server thinks it already has the first
     packet of this call (it doesn't know that the client doesn't know that
     it saw the call number the first time).
Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      a1399f8b
    • David Howells's avatar
      rxrpc: Access socket accept queue under right lock · 30b515f4
      David Howells authored 
      The socket's accept queue (socket->acceptq) should be accessed under
socket->call_lock, not under the connection lock.
Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      30b515f4
    • David Howells's avatar
      rxrpc: Add RCU destruction for connections and calls · dee46364
      David Howells authored 
      Add RCU destruction for connections and calls as the RCU lookup from the
transport socket data_ready handler is going to come along shortly.

Whilst we're at it, move the cleanup workqueue flushing and RCU barrierage
into the destruction code for the objects that need it (locals and
connections) and add the extra RCU barrier required for connection cleanup.
Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      dee46364
    • David Howells's avatar
      rxrpc: Release a call's connection ref on call disconnection · e653cfe4
      David Howells authored 
      When a call is disconnected, clear the call's pointer to the connection and
release the associated ref on that connection.  This means that the call no
longer pins the connection and the connection can be discarded even before
the call is.

As the code currently stands, the call struct is effectively pinned by
userspace until userspace has enacted a recvmsg() to retrieve the final
call state as sk_buffs on the receive queue pin the call to which they're
related because:

 (1) The rxrpc_call struct contains the userspace ID that recvmsg() has to
     include in the control message buffer to indicate which call is being
     referred to.  This ID must remain valid until the terminal packet is
     completely read and must be invalidated immediately at that point as
     userspace is entitled to immediately reuse it.

 (2) The final ACK to the reply to a client call isn't sent until the last
     data packet is entirely read (it's probably worth altering this in
     future to be send the ACK as soon as all the data has been received).


This change requires a bit of rearrangement to make sure that the call
isn't going to try and access the connection again after protocol
completion:

 (1) Delete the error link earlier when we're releasing the call.  Possibly
     network errors should be distributed via connections at the cost of
     adding in an access to the rxrpc_connection struct.

 (2) Remove the call from the connection's call tree before disconnecting
     the call.  The call tree needs to be removed anyway and incoming
     packets delivered by channel pointer instead.

 (3) The release call event should be considered last after all other
     events have been processed so that we don't need access to the
     connection again.

 (4) Move the channel_lock taking from rxrpc_release_call() to
     rxrpc_disconnect_call() where it will be required in future.
Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      e653cfe4
    • David Howells's avatar
      rxrpc: Fix handling of connection failure in client call creation · d1e858c5
      David Howells authored 
      If rxrpc_connect_call() fails during the creation of a client connection,
there are two bugs that we can hit that need fixing:

 (1) The call state should be moved to RXRPC_CALL_DEAD before the call
     cleanup phase is invoked.  If not, this can cause an assertion failure
     later.

 (2) call->link should be reinitialised after being deleted in
     rxrpc_new_client_call() - which otherwise leads to a failure later
     when the call cleanup attempts to delete the link again.
Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      d1e858c5
    • David Howells's avatar
      rxrpc: Move usage count getting into rxrpc_queue_conn() · 2c4579e4
      David Howells authored 
      Rather than calling rxrpc_get_connection() manually before calling
rxrpc_queue_conn(), do it inside the queue wrapper.

This allows us to do some important fixes:

 (1) If the usage count is 0, do nothing.  This prevents connections from
     being reanimated once they're dead.

 (2) If rxrpc_queue_work() fails because the work item is already queued,
     retract the usage count increment which would otherwise be lost.

 (3) Don't take a ref on the connection in the work function.  By passing
     the ref through the work item, this is unnecessary.  Doing it in the
     work function is too late anyway.  Previously, connection-directed
     packets held a ref on the connection, but that's not really the best
     idea.

And another useful changes:

 (*) Don't need to take a refcount on the connection in the data_ready
     handler unless we invoke the connection's work item.  We're using RCU
     there so that's otherwise redundant.
Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      2c4579e4
    • David Howells's avatar
      rxrpc: Check that the client conns cache is empty before module removal · eb9b9d22
      David Howells authored 
      Check that the client conns cache is empty before module removal and bug if
not, listing any offending connections that are still present.  Unfortunately,
if there are connections still around, then the transport socket is still
unexpectedly open and active, so we can't just unallocate the connections.
Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      eb9b9d22
    • David Howells's avatar
      rxrpc: Turn connection #defines into enums and put outside struct def · bba304db
      David Howells authored 
      Turn the connection event and state #define lists into enums and move
outside of the struct definition.

Whilst we're at it, change _SERVER to _SERVICE in those identifiers and add
EV_ into the event name to distinguish them from flags and states.

Also add a symbol indicating the number of states and use that in the state
text array.
Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      bba304db
    • David Howells's avatar
      rxrpc: Provide queuing helper functions · 5acbee46
      David Howells authored 
      Provide queueing helper functions so that the queueing of local and
connection objects can be fixed later.

The issue is that a ref on the object needs to be passed to the work queue,
but the act of queueing the object may fail because the object is already
queued.  Testing the queuedness of an object before hand doesn't work
because there can be a race with someone else trying to queue it.  What
will have to be done is to adjust the refcount depending on the result of
the queue operation.
Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      5acbee46
    • Herbert Xu's avatar
      rxrpc: Avoid using stack memory in SG lists in rxkad · a263629d
      Herbert Xu authored 
      rxkad uses stack memory in SG lists which would not work if stacks were
allocated from vmalloc memory.  In fact, in most cases this isn't even
necessary as the stack memory ends up getting copied over to kmalloc
memory.

This patch eliminates all the unnecessary stack memory uses by supplying
the final destination directly to the crypto API.  In two instances where a
temporary buffer is actually needed we also switch use a scratch area in
the rxrpc_call struct (only one DATA packet will be being secured or
verified at a time).

Finally there is no need to split a split-page buffer into two SG entries
so code dealing with that has been removed.
Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: default avatarAndy Lutomirski <luto@kernel.org>
Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      a263629d
    • David Howells's avatar
      rxrpc: Check the source of a packet to a client conn · 689f4c64
      David Howells authored 
      When looking up a client connection to which to route a packet, we need to
check that the packet came from the correct source so that a peer can't try
to muck around with another peer's connection.
Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      689f4c64
    • David Howells's avatar
      rxrpc: Fix some sparse errors · 88b99d0b
      David Howells authored 
      Fix the following sparse errors:

../net/rxrpc/conn_object.c:77:17: warning: incorrect type in assignment (different base types)
../net/rxrpc/conn_object.c:77:17:    expected restricted __be32 [usertype] call_id
../net/rxrpc/conn_object.c:77:17:    got unsigned int [unsigned] [usertype] call_id
../net/rxrpc/conn_object.c:84:21: warning: restricted __be32 degrades to integer
../net/rxrpc/conn_object.c:86:26: warning: restricted __be32 degrades to integer
../net/rxrpc/conn_object.c:357:15: warning: incorrect type in assignment (different base types)
../net/rxrpc/conn_object.c:357:15:    expected restricted __be32 [usertype] epoch
../net/rxrpc/conn_object.c:357:15:    got unsigned int [unsigned] [usertype] epoch
../net/rxrpc/conn_object.c:369:21: warning: restricted __be32 degrades to integer
../net/rxrpc/conn_object.c:371:26: warning: restricted __be32 degrades to integer
../net/rxrpc/conn_object.c:411:21: warning: restricted __be32 degrades to integer
../net/rxrpc/conn_object.c:413:26: warning: restricted __be32 degrades to integer
Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      88b99d0b
  3. 01 Jul, 2016 1 commit
    • David Howells's avatar
      rxrpc: Fix processing of authenticated/encrypted jumbo packets · ac5d2683
      David Howells authored 
      When a jumbo packet is being split up and processed, the crypto checksum
for each split-out packet is in the jumbo header and needs placing in the
reconstructed packet header.

When the code was changed to keep the stored copy of the packet header in
host byte order, this reconstruction was missed.

Found with sparse with CF=-D__CHECK_ENDIAN__:

    ../net/rxrpc/input.c:479:33: warning: incorrect type in assignment (different base types)
    ../net/rxrpc/input.c:479:33:    expected unsigned short [unsigned] [usertype] _rsvd
    ../net/rxrpc/input.c:479:33:    got restricted __be16 [addressable] [usertype] _rsvd

Fixes: 0d12f8a4 ("rxrpc: Keep the skb private record of the Rx header in host byte order")
Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      ac5d2683
  5. 27 Jun, 2016 25 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7