- 23 Oct, 2019 13 commits
-
-
Thierry Reding authored
If the transmitter supports pre-emphasis post cursor2 the sink will request adjustments in a similar way to how it requests adjustments to the voltage swing and pre-emphasis settings. Add a helper to extract these adjustments on a per-lane basis from the DPCD link status. Reviewed-by:
Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191021143437.1477719-8-thierry.reding@gmail.com
-
Thierry Reding authored
Use microsecond sleeps for the clock recovery and channel equalization delays during link training. The duration of these delays can be from 100 us up to 16 ms. It is rude to busy-loop for that amount of time. While at it, also convert to standard coding style by putting the opening braces in a function definition on a new line. Also switch to using an unsigned int for the AUX read interval to match the data type of the parameters to usleep_range(). v2: use correct multiplier for training delays (Philipp Zabel) v3: clarify data type change in commit message Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20191021143437.1477719-7-thierry.reding@gmail.com
-
Thierry Reding authored
Add a helper to check if the sink supports the eDP alternate scrambler reset value of 0xfffe. Reviewed-by:
-
Thierry Reding authored
Add a helper to check whether the sink supports ANSI 8B/10B channel coding capability as specified in ANSI X3.230-1994, clause 11. Reviewed-by:
-
Thierry Reding authored
Add a helper that checks for the fast training capability given the DPCD receiver capabilities blob. Reviewed-by:
-
Thierry Reding authored
It's idiomatic to check the return value of a function call immediately after the function call, without any blank lines in between, to make it more obvious that the two lines belong together. Reviewed-by:
-
Thierry Reding authored
Keeping the list sorted alphabetically makes it much easier to determine where to add new includes. Reviewed-by:
-
Sean Paul authored
Parroting Daniel's backmerge justification from 2e79e22e: Thierry needs fd70c775 ("drm/bridge: tc358767: fix max_tu_symbol value") to be able to merge his dp_link patch series. Signed-off-by:
Sean Paul <seanpaul@chromium.org>
-
Sean Paul authored
This reverts commit 23b48225. This patch does not have an acceptable open source userspace implementation, and as such it does not meet the requirements for adding new UAPI. Discussion is in the Link. Link: https://lists.freedesktop.org/archives/dri-devel/2019-October/240586.html Fixes: 23b48225 ("drm/omap: add OMAP_BO flags to affect buffer allocation") Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Jean-Jacques Hiblot <jjhiblot@ti.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Acked-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by:
Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Daniel Vetter authored
Thierry needs fd70c775 ("drm/bridge: tc358767: fix max_tu_symbol value") to be able to merge his dp_link patch series. Some adjacent changes conflicts, plus some clashes in i915 due to cherry-picking and git trying to be helpful and leaving both versions in. Signed-off-by:
-
Daniel Vetter authored
Should help new people pick suitable tasks. Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Sean Paul <sean@poorly.run> Reviewed-by:
Sean Paul <sean@poorly.run> Acked-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191022152530.22038-2-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
Done with commit aef9f33b Author: Imre Deak <imre.deak@intel.com> Date: Tue Oct 23 17:43:10 2018 +0300 drm/i915: Ensure proper HDA suspend/resume ordering with a device link Cc: Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Daniel Vetter authored
This is not something we'll fix, because failing to clean up stuff (or doing it in the wrong order) is a driver bug. The offending FIXME goes all the way back to the original modeset merge. We've added a WARN_ON in commit 2b677e8c Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Mon Dec 10 21:16:05 2012 +0100 drm: reference framebuffers which are on the idr including a comment blaming drivers on this. Right thing to do is most likely drm_atomic_helper_shutdown plus making sure that drm_mode_config_cleanup is not called too early (i.e. not in driver unload, but only in the final drm_device release callback). Cc: Mihail Atanassov <Mihail.Atanassov@arm.com> Reported-by:
Mihail Atanassov <Mihail.Atanassov@arm.com> Reviewed-by:
-
- 22 Oct, 2019 17 commits
-
-
Ville Syrjälä authored
Use the new drm_hdmi_avi_infoframe_bars() helper instead of hand rolling it. Cc: Eric Anholt <eric@anholt.net> Cc: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191008164814.5894-2-ville.syrjala@linux.intel.comReviewed-by:
Boris Brezillon <boris.brezillon@collabora.com>
-
Ville Syrjälä authored
Add a function to fill the AVI infoframe bar information from the standard tv margin properties. Cc: Eric Anholt <eric@anholt.net> Cc: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by:
-
Mihail Atanassov authored
I'll be the main point of contact. Cc: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Acked-by:
James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by:
-
Andy Shevchenko authored
GCC complains about dubious bitwise OR operand: drivers/gpu/drm/drm_mipi_dbi.c:1024:49: warning: dubious: x | !y CC [M] drivers/gpu/drm/drm_mipi_dbi.o As long as buffer is consist of byte (u8) values, we may use simple right shift and satisfy compiler. It also reduces amount of operations needed. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Noralf Trønnes <noralf@tronnes.org> Tested-by:
-
Gerd Hoffmann authored
Be consistent with the rest of the code base. Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Reviewed-by:
-
Gerd Hoffmann authored
Signed-off-by:
-
Gerd Hoffmann authored
qxl uses small buffer objects for qxl commands. Allocate them top-down to reduce fragmentation. Signed-off-by:
-
Gerd Hoffmann authored
We have no qxl-specific fops any more. Signed-off-by:
-
Gerd Hoffmann authored
Not needed any more. Signed-off-by:
-
Gerd Hoffmann authored
Wire up the new drm_gem_ttm_mmap() helper function. Use generic drm_gem_mmap() and remove qxl_mmap(). Signed-off-by:
-
Gerd Hoffmann authored
Not sure what this hook is supposed to do. vmf->vma->vm_private_data should never be NULL, so the extra check in qxl_ttm_fault should have no effect. Drop it. Signed-off-by:
-
Wambui Karuga authored
Remove unnecessary variable `ret` in drm_dp_atomic_find_vcpi_slots() only used to hold the function return value and have the function return the value directly. Issue found by coccinelle: @@ local idexpression ret; expression e; @@ -ret = +return e; -return ret; Signed-off-by:Wambui Karuga <wambui.karugax@gmail.com> Signed-off-by:
-
Kangjie Lu authored
"clock" may be copied to "best_clock". Initializing best_clock is not sufficient. The fix initializes clock as well to avoid memory disclosures and informaiton leaks. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Signed-off-by:
-
Kangjie Lu authored
`best_clock` is an object that may be sent out. Object `clock` contains uninitialized bytes that are copied to `best_clock`, which leads to memory disclosure and information leak. Signed-off-by:
-
git://linuxtv.org/pinchartl/mediaDave Airlie authored
- R-Car DU support for R8A774B1 SoC - R-Car DU fixes for H2 ES2.0 and later revisions Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191015215116.GF19403@pendragon.ideasonboard.com
-
https://github.com/ckhu-mediatek/linux.git-tagsDave Airlie authored
Mediatek DRM next for Linux 5.5 This include mipi_tx, dsi, and partial crtc for MT8183 SoC. Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
UAPI Changes: - Introduce a versioning of the i915-perf uapi (Lionel) - Add support for perf configuration queries (Lionel) Allow listing perf configurations with IOCTL in addition to sysfs. This is useful in container usecases. - Allow dynamic reconfiguration of the OA stream (Chris) Allows the OA stream to be reconfigured between batch buffers, giving greater flexibility in sampling. - Allow holding preemption on filtered perf ctx Allow CAP_ADMIN to block pre-emption of a context to query performance counters without disturbances. Mesa changes: https://gitlab.freedesktop.org/mesa/mesa/merge_requests/932 Cross-subsystem Changes: - drm-next backmerge for HDR DP changes https://lists.freedesktop.org/archives/dri-devel/2019-September/236453.html Driver Changes: - Add DC3CO sleep state for Tigerlake (Anshuman) - Tigerlake BCS engine support engine relative MMIO (Daniele) - Simplify the Tigerlake LRC register list for !RCS (Daniele) - Read SAGV block time from PCODE on Tigerlake (James) - Add 12 missing Tigerlake workarounds (Mika) - Enable DDI/Port G for Tigerlake (Khaled) - Avoid hang in tsg,vfe units by keeping l3 clocks ICL+(Mika) - Fix Bugzilla #111966: Favor last VBT child device (Ville) - Fix blue/black screen on boot due to broken gamma (Swati) - Add support of BT.2020 Colorimetry to DP MSA (Gwan-gyeong) - Attach colorspace property to DP connector (Gwan-gyeong) - Attach HDR metadata property to DP connector (Gwan-gyeong) - Base intel_memory_region support prep for local memory (Matt A) - Introduce Jasper Lake PCH (Matt R) - Support multiple GPUs in PMU (Tvrtko) - Fix MST oops due to MSA changes (Ville) - Refuse modes with hdisplay==4096 on pre-HSW DP (Ville) - Correct the PCH type in irq postinstall for JSP (Vivek) - Save Master transcoder in slave's crtc_state for Transcoder Port Sync (Manasi) - Enable TRANSCODER PORT SYNC for tiled displays across separate ports (Manasi) - HW state readout for transcoder port sync config (Manasi) - Enable master-slaves in trans port sync (Manasi) - In port sync mode disable slaves first then master (Manasi) - Fix port checks for MST support on gen >= 11 (Lucas) - Flush submission tasklet before waiting/retiring (Chris) - Flush tasklet submission before sleeping on i915_request_wait (Chris) - Object pin reference counting fixes (Chris, Matt A) - Clear semaphore immediately upon ELSP promotion (Chris) - Child device size remains unchanged through VBT 229 (Matt R) - Restore dropped 'interruptible' flag on retiring requests (Chris) - Treat a busy timeline as 'active' while waiting (Chris) - Clean up struct_mutex from perf (Chris) - Update locking around execlists->active (Chris) - Mark up expected execlist state during reset (Chris) - Remove cursor use of properties for coordinates (Maarten) - Only mark incomplete requests as -EIO on cancelling (Chris) - Add an rcu_barrier option to i915_drop_caches (Chris) - Replace perf global wakeref tracking with engine-pm (Chris) - Prevent merging requests with conflicting flags (Chris) - Allow for CS OA configs to be created lazily (Lionel) - Implement active wait for noa configurations (Lionel) - Execute OA configuration from command stream (Lionel) - Prefer using the pinned_ctx for emitting delays on config (Chris) - Port C's hotplug interrupt is associated with TC1 bits (Vivek, Matt R) - Extend program of VSC Header and DB for Colorimetry Format (Gwan-gyeong) - Fine-tune timeslicing of contexts (Chris) - Do initial mocs configuration directly (Chris) - Fix uninitialized variable on PMU error path (Tvrtko) - Don't disable interrupts independently of the locking (Sebastian) - Eliminate struct_mutext from GVT (Chris) - Move perf types to their own header (Lionel) - Drop list of perf streams (always size 1) (Lionel) - Store the perf associated engine of a stream (Lionel) - Make array hw_engine_mask static (Colin) - Prefer shortest path to RPM/perf/GT instead of dev_priv (Chris, Tvrtko) - Virtual request submission fixes (Chris) - Selftest/CI improvements (Chris) - Fix Kconfig indentation (Krzysztof) - Give engine->kernel_context distinct timeline lock classes (Chris) - Fix null pointer deref on selftest error path (Colin) - Select DPLL's via mask (Matt R) - Introduce and use intel_atomic_crtc_state_for_each_plane_state (Maarten) - Use intel_plane_state in prepare and cleanup plane_fb (Maarten) - Remove begin/finish_crtc_commit (Maarten) - Move SAGV block time to dev_priv (James) - Avoid polluting the i915_oa_config with error pointers (Chris) - Squelch display kerneldoc warnings (Chris) - Assert tasklet is locked for process_csb() (Chris) - Switch to using DP_MSA_MISC_* defines (Ville) - Stop using drm_atomic_helper_check_planes() (Ville) - Make .modeset_calc_cdclk() mandatory (Ville) - Use drm_rect_translate_to()/drm_rect_init() (Ville) - Refactor timestamping constants update (Ville) - Switch intel_legacy_cursor_update() to intel_ types (Ville) - Prepare the connector/encoder mask readout for hw vs. uapi state split (Ville) - Prepare the mode readout for hw vs. uapi state split (Ville) - Move swizzle_bit under i915_ggtt (Chris) - Improve microcontrollers documentation (Daniele) - Move the cursor rotation handling into intel_cursor_check_surface() (Ville) - Cleanups to pipe code (Ville) - Shrink eDRAM ways/sets arrays for code size (Ville) - Cleanups to HDCP2 timeout code (Ville) - Restore full symmetry in i915_driver_modeset_probe/remove (Janusz) - Simplify setting of ddi_io_power_domain (Lucas) - Add pipe id/name to pipe mismatch logs (Lucas) - Prettify MST debug message (Lucas) - Extract GT ring management to separate files (Andi) Signed-off-by:
-
- 21 Oct, 2019 4 commits
-
-
-
Dariusz Marcinkiewicz authored
Use the new cec_notifier_conn_(un)register() functions to (un)register the notifier for the HDMI connector. Signed-off-by:
Dariusz Marcinkiewicz <darekm@google.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20191017072842.16793-2-hverkuil-cisco@xs4all.nl
-
Joonas Lahtinen authored
Signed-off-by:Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Chris Wilson authored
Use the local vgpu_lock while preparing workloads to avoid taking the obsolete i915->drm.struct_mutex Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191016183902.13614-1-chris@chris-wilson.co.uk
-
- 20 Oct, 2019 6 commits
-
-
Linus Torvalds authored
-
Andi Shyti authored
Although the ring management is much smaller compared to the other GT power management functions, continue the theme of extracting it out of the huge intel_pm.c for maintenance. Based on a patch by Chris Wilson. Signed-off-by:
Andi Shyti <andi.shyti@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild fixes from Masahiro Yamada: - fix a bashism of setlocalversion - do not use the too new --sort option of tar * tag 'kbuild-fixes-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kheaders: substituting --sort in archive creation scripts: setlocalversion: fix a bashism kbuild: update comment about KBUILD_ALLDIRS
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A small set of x86 fixes: - Prevent a NULL pointer dereference in the X2APIC code in case of a CPU hotplug failure. - Prevent boot failures on HP superdome machines by invalidating the level2 kernel pagetable entries outside of the kernel area as invalid so BIOS reserved space won't be touched unintentionally. Also ensure that memory holes are rounded up to the next PMD boundary correctly. - Enable X2APIC support on Hyper-V to prevent boot failures. - Set the paravirt name when running on Hyper-V for consistency - Move a function under the appropriate ifdef guard to prevent build warnings" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot/acpi: Move get_cmdline_acpi_rsdp() under #ifdef guard x86/hyperv: Set pv_info.name to "Hyper-V" x86/apic/x2apic: Fix a NULL pointer deref when handling a dying cpu x86/hyperv: Make vapic support x2apic mode x86/boot/64: Round memory hole size up to next PMD page x86/boot/64: Make level2_kernel_pgt pages invalid outside kernel area -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "A small set of irq chip driver fixes and updates: - Update the SIFIVE PLIC interrupt driver to use the fasteoi handler to address the shortcomings of the existing flow handling which was prone to lose interrupts - Use the proper limit for GIC interrupt line numbers - Add retrigger support for the recently merged Anapurna Labs Fabric interrupt controller to make it complete - Enable the ATMEL AIC5 interrupt controller driver on the new SAM9X60 SoC" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/sifive-plic: Switch to fasteoi flow irqchip/gic-v3: Fix GIC_LINE_NR accessor irqchip/atmel-aic5: Add support for sam9x60 irqchip irqchip/al-fic: Add support for irq retrigger -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull hrtimer fixlet from Thomas Gleixner: "A single commit annotating the lockcless access to timer->base with READ_ONCE() and adding the WRITE_ONCE() counterparts for completeness" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: hrtimer: Annotate lockless access to timer->base
-
