- 04 Sep, 2018 21 commits
-
-
Lorenzo Bianconi authored
Use mt76u_init utility routine for usb initialization. Moreover remove following unused routines: - mt76x0_rr - mt76x0_wr - mt76x0_rmw - mt76x0_wr_copy - mt76x0_assign_pipes Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Lorenzo Bianconi authored
Introduce multiple regs read support to mcu layer in mt76-usb module. Multiple regs read will be reused by mt76x0 driver in usb mcu layer unification between mt76x0 and mt76x2u drivers Signed-off-by:
-
Lorenzo Bianconi authored
Move mt76x2u_mcu_deinit routine in usb_mcu layer in order to be reused by mt76x0 driver in usb mcu layer unification between mt76x0 and mt76x2u drivers Signed-off-by:
-
Lorenzo Bianconi authored
Split __mt76u_mcu_send_msg and mt76u_mcu_send_msg in order to be reused by mt76x0 driver in usb mcu layer unification between mt76x0 and mt76x2u drivers Signed-off-by:
-
Lorenzo Bianconi authored
Move common definition of mt76_reg_pair in mt76.h and remove duplicated code in mt76x2_init_common.c Signed-off-by:
-
Stanislaw Gruszka authored
Use common mt76x02_sta and mt76x02_tx_status structures in mt76x0 sub-driver. Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
Stanislaw Gruszka authored
Signed-off-by:
-
Stanislaw Gruszka authored
Second part of unifying mt76x02_sta structure between mt76x0 and mt76x2. Signed-off-by:
-
Stanislaw Gruszka authored
First part of unifying mt76x02_sta structure between mt76x0 and mt76x2. Signed-off-by:
-
Stanislaw Gruszka authored
Private vif structures definitions are the same for mt76x2 and mt76x0. Signed-off-by:
-
Stanislaw Gruszka authored
Use helper from util instead of custom code. Signed-off-by:
-
Stanislaw Gruszka authored
Move mt76x02_mac_wcid_set_drop to common code and use it in mt76x0. Signed-off-by:
-
Stanislaw Gruszka authored
Merge mt76x{0,2}_mac_wcid_setup into common code. Signed-off-by: -
Stanislaw Gruszka authored
Merge mt76x{0,2}_mac_wcid_set_key into common code. Signed-off-by: -
Stanislaw Gruszka authored
Merge mt76x{0,2} mac_shared_key_setup into common code. Signed-off-by: -
Stanislaw Gruszka authored
Add helpers for register access from common code. Signed-off-by:
-
Stanislaw Gruszka authored
Merge mt76x{0,2} mac_get_key_info into new mt76x02_mac.c file. Signed-off-by: -
Stanislaw Gruszka authored
Move rxfilter and mutex to common structure. Create mt76x02-lib.ko for mt76x0 and mt76x2 common functions and create new unified mt76x02_configure_filter() function there. Signed-off-by:
-
Stanislaw Gruszka authored
Add missed definitions for mt76x0 into mt76x02_regs.h. Remove mt76x0/regs.h and fixup mt76x0 code to adjust to some diffrent registers/fields names. Signed-off-by:
-
Stanislaw Gruszka authored
MAC registers are the same for mt76x0 and mt76x2. Rename mt76x2_regs.h file to reflect that. Signed-off-by:
-
Stanislaw Gruszka authored
Create new mt76x02_mac.h for common mac functions of mt76x0 and mt76x2 and unity wait_for_mac for both drivers. Signed-off-by:
-
- 31 Aug, 2018 19 commits
-
-
Lorenzo Bianconi authored
Verify if evt field is set to EVT_CMD_DONE in usb mcu response messages. This is a preliminary patch for usb_mcu layer unification between mt76x0u and mt76x2u driver. Signed-off-by:
-
Lorenzo Bianconi authored
Cleanup {tx,rx} and mcu queues if resume operation fails Fixes: ee676cd5 ("mt76: add driver code for MT76x2u based devices") Signed-off-by: -
Geert Uytterhoeven authored
With gcc 4.1.2: drivers/net/wireless/mediatek/mt76/mt76x0/tx.c: In function ‘mt76x0_tx’: drivers/net/wireless/mediatek/mt76/mt76x0/tx.c:169: warning: comparison is always true due to limited range of data type drivers/net/wireless/mediatek/mt76/mt76x2_tx_common.c: In function ‘mt76x2_tx’: drivers/net/wireless/mediatek/mt76/mt76x2_tx_common.c:35: warning: comparison is always true due to limited range of data type While assigning -1 to a u8 works fine, comparing with -1 does not work as expected. Fix this by comparing with 0xff, like is already done in some other places. Signed-off-by:Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Siva Rebbagondla authored
While running regressions, observed below kernel panic when sdio disconnect called. This is because of, kthread_stop() is taking care of wait_for_completion() by default. When wait_for_completion triggered in kthread_stop and as it was done already, giving kernel panic. Hence, removing redundant wait_for_completion() from rsi_kill_thread(). ... skipping ... BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff810a63df>] exit_creds+0x1f/0x50 PGD 0 Oops: 0002 [#1] SMP CPU: 0 PID: 6502 Comm: rmmod Tainted: G OE 4.15.9-Generic #154-Ubuntu Hardware name: Dell Inc. Edge Gateway 3003/ , BIOS 01.00.00 04/17/2017 Stack: ffff88007392e600 ffff880075847dc0 ffffffff8108160a 0000000000000000 ffff88007392e600 ffff880075847de8 ffffffff810a484b ffff880076127000 ffff88003cd3a800 ffff880074f12a00 ffff880075847e28 ffffffffc09bed15 Call Trace: [<ffffffff8108160a>] __put_task_struct+0x5a/0x140 [<ffffffff810a484b>] kthread_stop+0x10b/0x110 [<ffffffffc09bed15>] rsi_disconnect+0x2f5/0x300 [ven_rsi_sdio] [<ffffffff81578bcb>] ? __pm_runtime_resume+0x5b/0x80 [<ffffffff816f0918>] sdio_bus_remove+0x38/0x100 [<ffffffff8156cc64>] __device_release_driver+0xa4/0x150 [<ffffffff8156d7a5>] driver_detach+0xb5/0xc0 [<ffffffff8156c6c5>] bus_remove_driver+0x55/0xd0 [<ffffffff8156dfbc>] driver_unregister+0x2c/0x50 [<ffffffff816f0b8a>] sdio_unregister_driver+0x1a/0x20 [<ffffffffc09bf0f5>] rsi_module_exit+0x15/0x30 [ven_rsi_sdio] [<ffffffff8110cad8>] SyS_delete_module+0x1b8/0x210 [<ffffffff81851dc8>] entry_SYSCALL_64_fastpath+0x1c/0xbb Signed-off-by:
Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by:
-
Siva Rebbagondla authored
During testing in ARM32 platforms, observed below kernel panic, as driver accessing data beyond the allocated memory while submitting URB to USB. Fix: Resolved this by specifying correct length by considering 64 bit alignment. so that, USB bus driver will access only allocated memory. Unit-test: Tested and confirm that driver bring up and scanning, connection and data transfer works fine with this fix. ...skipping... [ 25.389450] Unable to handle kernel paging request at virtual address 5aa11422 [ 25.403078] Internal error: Oops: 5 [#1] SMP ARM [ 25.407703] Modules linked in: rsi_usb [ 25.411473] CPU: 1 PID: 317 Comm: RX-Thread Not tainted 4.18.0-rc7 #1 [ 25.419221] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 25.425764] PC is at skb_release_data+0x90/0x168 [ 25.430393] LR is at skb_release_all+0x28/0x2c [ 25.434842] pc : [<807435b0>] lr : [<80742ba0>] psr: 200e0013 5aa1141e [ 25.464633] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 25.477524] Process RX-Thread (pid: 317, stack limit = 0x(ptrval)) [ 25.483709] Stack: (0xedf69ed8 to 0xedf6a000) [ 25.569907] Backtrace: [ 25.572368] [<80743520>] (skb_release_data) from [<80742ba0>] (skb_release_all+0x28/0x2c) [ 25.580555] r9:7f00258c r8:00000001 r7:ee355000 r6:eddab0d0 r5:eddab000 r4:eddbb840 [ 25.588308] [<80742b78>] (skb_release_all) from [<807432cc>] (consume_skb+0x30/0x50) [ 25.596055] r5:eddab000 r4:eddbb840 [ 25.599648] [<8074329c>] (consume_skb) from [<7f00117c>] (rsi_usb_rx_thread+0x64/0x12c [rsi_usb]) [ 25.608524] r5:eddab000 r4:eddbb840 [ 25.612116] [<7f001118>] (rsi_usb_rx_thread [rsi_usb]) from [<80142750>] (kthread+0x11c/0x15c) [ 25.620735] r10:ee9ff9e0 r9:edcde3b8 r8:ee355000 r7:edf68000 r6:edd3a780 r5:00000000 [ 25.628567] r4:edcde380 [ 25.631110] [<80142634>] (kthread) from [<801010e8>] (ret_from_fork+0x14/0x2c) [ 25.638336] Exception stack(0xedf69fb0 to 0xedf69ff8) [ 25.682929] ---[ end trace 8236a5496f5b5d3b ]--- Signed-off-by:
-
Rasmus Villemoes authored
strnchr takes arguments in the order of its name: string, max bytes to read, character to search for. Here we're passing '\n' aka 10 as the buffer size, and searching for sizeof(buf) aka BRCMF_DCMD_SMLEN aka 256 (aka '\0', since it's implicitly converted to char) within those 10 bytes. Just interchanging the last two arguments would still leave a bug, because if we've been successful once, there are not sizeof(buf) characters left after the new value of p. Since clmver is immediately afterwards passed as a %s argument, I assume that it is actually a properly nul-terminated string. For that case, we have strreplace(). Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
-
Dan Carpenter authored
The problem with this copy_to_user() calls is that they don't ensure that "size" is less than the "length" which the user provided. Obviously, this is debugfs and "size" is normally going to be very small so it probably doesn't matter, but this is the correct thing to do. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
-
Ganapathi Bhat authored
USB suspend handler will kill the presubmitted rx_cmd URB. This triggers a call to the corresponding URB complete handler, which will free the rx_cmd skb, associated with rx_cmd URB. Due to a possible race betwen suspend handler and main thread, depicted in 'commit bfcacac6c84b ("mwifiex: do no submit URB in suspended state")', it is possible that the rx_cmd skb will fail to get freed. This causes a memory leak, since the resume handler will always allocate a new rx_cmd skb. To fix this, free the rx_cmd skb in mwifiex_usb_submit_rx_urb, if the device is in suspended state. Signed-off-by:Vidya Dharmaraju <vidyad@marvell.com> Signed-off-by:
Cathy Luo <cluo@marvell.com> Signed-off-by:
Ganapathi Bhat <gbhat@marvell.com> Signed-off-by:
-
Ganapathi Bhat authored
There is a possible race between USB suspend and main thread: 1. After processing the command response, main thread will submit rx_cmd URB back so as to process next command response, by calling mwifiex_usb_submit_rx_urb. 2. During USB suspend, the suspend handler will check if rx_cmd URB is pending(submitted) and if true, kill this URB. There is a possible race between #1 and #2, where rx_cmd URB will be submitted by main thread(#1) after the suspend handler check in #2. To fix this, check if device is already suspended in mwifiex_usb_submit_rx_urb, in which case do not submit the URB. Signed-off-by:
-
Larry Finger authored
In gcc8, when the 3rd argument (size) of a call to strncpy() matches the length of the first argument, the compiler warns of the possibility of an unterminated string. Using strlcpy() forces a null at the end. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Colin Ian King authored
Array encaps_hdr and macro ENCAPS_OVERHEAD are declared but are not being used, hence they are redundant and can be removed. Cleans up clang warning: warning: 'encaps_hdr' defined but not used [-Wunused-const-variable=] Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Chung-Hsien Hsu authored
Add 4-way handshake offload detection for FT with EAP authentication. Signed-off-by:
Chung-Hsien Hsu <stanley.hsu@cypress.com> Signed-off-by:
Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by:
-
Chung-Hsien Hsu authored
Add WLAN_AKM_SUITE_FT_8021X and WLAN_AKM_SUITE_FT_PSK in brcmf_set_key_mgmt() for FT support. Signed-off-by:
-
Jia-Shyr Chuang authored
CYW89342 is a 2x2 MIMO, 802.11a/b/g/n/ac for WLAN. It is a member of 4355/4359 family. Signed-off-by:
Jia-Shyr Chuang <saint.chuang@cypress.com> Signed-off-by:
-
Dan Carpenter authored
If recvlength is less than MESSAGE_HEADER_LEN (4) we would end up corrupting memory. Fixes: c305a19a ("libertas_tf: usb specific functions") Signed-off-by:
-
Rosen Penev authored
A 2x2 unit with a USB dock for optimal placement. Signed-off-by:
Rosen Penev <rosenp@gmail.com> Acked-by:
-
Varsha Rao authored
Remove unnecessary parentheses to fix the extraneous parentheses clang warning. Signed-off-by:
Varsha Rao <rvarsha016@gmail.com> Signed-off-by:
-
Varsha Rao authored
Remove the unnecessary parentheses to fix the clang warning of extraneous parentheses. Signed-off-by:
-
Kalle Valo authored
Merge tag 'iwlwifi-next-for-kalle-2018-08-31' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next iwlwifi patches for 4.20 * One fix for channel-switch handling; * Some improvements in the HE code; * New FW API handling; * Improvements in the debugging code; * Some improvements in the PCI recovery mechanism; * Support for a few FW API changes; * Enable a new scanning feature; * Continued work on HE (mostly radiotap); * Some fixes in the FW rate-scaling implementation; * Other clean-ups and small fixes and improvements;
-
