- 08 Aug, 2014 31 commits
-
-
Søren Andersen authored
Add support for the pcf85063 rtc chip. [akpm@linux-foundation.org: fix comment typo, tweak conding style] Signed-off-by:
Soeren Andersen <san@rosetechnology.dk> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Stuart Longland authored
Add support for configuring the ISL12022 real-time clock via the Device tree framework. This is based on what I've seen in the related ISL12057 driver, it has been tested and works on a Technologic Systems TS-7670 device which uses a ISL12020 RTC device, my device tree looks like this: apbx@80040000 { i2c0: i2c@80058000 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; clock-frequency = <400000>; status = "okay"; isl12022@0x6f { compatible = "isl,isl12022"; reg = <0x6f>; }; }; ... etc }; Signed-off-by:Stuart Longland <stuartl@vrt.com.au> Cc: Roman Fietze <roman.fietze@telemotive.de> Signed-off-by:
-
Vincent Donnefort authored
This patch adds alarm support for the NXP PCF8563 chip. Signed-off-by:
Vincent Donnefort <vdonnefort@gmail.com> Cc: Simon Guinot <simon.guinot@sequanux.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Vincent Donnefort authored
This functions allow to factorize I2C I/O operations. Signed-off-by:
-
Mark Salter authored
Currently, the rtc-efi driver is restricted to ia64 only. Newer architectures with EFI support may want to also use that driver. This patch moves the platform device setup from ia64 into drivers/rtc and allow any architecture with CONFIG_EFI=y to use the rtc-efi driver. Signed-off-by:
Mark Salter <msalter@redhat.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by:
-
Hyogi Gim authored
In __rtc_set_alarm(), the error after __rtc_read_time() is not checked. If rtc device fail to read time, we cannot guarantee the following process. Add the verification code for returned __rtc_read_time() error. Signed-off-by:
Hyogi Gim <hyogi.gim@lge.com> Acked-by:
Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Jan Beulich authored
In particular seeing zero in eft->month is problematic, as it results in -1 (converted to unsigned int, i.e. yielding 0xffffffff) getting passed to rtc_year_days(), where the value gets used as an array index (normally resulting in a crash). This was observed with the driver enabled on x86 on some Fujitsu system (with possibly not up to date firmware, but anyway). Perhaps efi_read_alarm() should not fail if neither enabled nor pending are set, but the returned time is invalid? Signed-off-by:
Jan Beulich <jbeulich@suse.com> Reported-by:
Raymund Will <rw@suse.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Jingoo Han <jg1.han@samsung.com> Acked-by:
Lee, Chun-Yi <jlee@suse.com> Signed-off-by:
-
Alexander Shiyan authored
Commit 5516f097 ("drivers/rtc/rtc-ds1742.c: remove redundant of_match_ptr() helper") has description as: "'ds1742_rtc_of_match' is always compiled in. Hence the helper macro is not needed". It is not true, of_match_ptr() macro makes of_device_id parameter unused and this constant is declared with __maybe_unused attribute, so normally this variable should be discarded by linker. This patch revers this commit, since there are no reason to compile of_device_id constant for non-DT systems. Signed-off-by:
Alexander Shiyan <shc_work@mail.ru> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
Jean Delvare authored
The rtc-moxart driver is only useful on MOXA ART systems so it should depend on ARCH_MOXART as all other MOXA ART drivers already do. Add COMPILE_TEST as an alternative to allow for build testing on other systems. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Jonas Jensen <jonas.jensen@gmail.com> Signed-off-by:
-
Jean Delvare authored
Move the DS2404 entry together with the other Dallas entries, and add Maxim so that it looks nicer (and more correct, too.) Signed-off-by:
-
Raghavendra Ganiga authored
This is a patch to add support of nvram for maxim dallas rtc ds1343. Signed-off-by:
Raghavendra Chandra Ganiga <ravi23ganiga@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
NeilBrown authored
Signed-off-by:
NeilBrown <neilb@suse.de> Acked-by:
Ian Kent <raven@themaw.net> Signed-off-by:
-
NeilBrown authored
{__,}manage_dentry_{set,clear}_{automount,transit} are 4 unused inline functions. Discard them. Signed-off-by: -
NeilBrown authored
If the expiring_list is empty, we can avoid a costly spinlock in the rcu-walk path through autofs4_d_manage (once the rest of the path becomes rcu-walk friendly). Signed-off-by:
-
NeilBrown authored
The variable 'ino' already exists and already has the correct value. The d_fsdata of a dentry is never changed after the d_fsdata is instantiated, so this new assignment cannot be necessary. It was introduced in commit b5b80177 ("autofs4: Add d_manage() dentry operation"). Signed-off-by:
-
NeilBrown authored
Signed-off-by:
-
Fabian Frederick authored
- Add pr_fmt - Coalesce formats - Use current pr_foo() functions instead of printk - Remove unnecessary "failed" display (already in log level). Signed-off-by:
Fabian Frederick <fabf@skynet.be> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by:
-
Paul Gortmaker authored
Currently rootdelay=N and rootwait behave differently (aside from the obvious unbounded wait duration) because they are at different places in the init sequence. The difference manifests itself for md devices because the call to md_run_setup() lives between rootdelay and rootwait, so if you try to use rootdelay=20 to try and allow a slow RAID0 array to assemble, you get this: [ 4.526011] sd 6:0:0:0: [sdc] Attached SCSI removable disk [ 22.972079] md: Waiting for all devices to be available before autodetect i.e. you've achieved nothing other than delaying the probing 20s, when what you wanted was a 20s delay _after_ the probing for md devices was initiated. Here we move the rootdelay code to be right beside the rootwait code, so that their behaviour is consistent. It should be noted that in doing so, the actions based on the saved_root_name[0] and initrd_load() were previously put on hold by rootdelay=N and now currently will not be delayed. However, I think consistent behaviour is more important than matching historical behaviour of delaying the above two operations. Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Namhyung Kim authored
__sprint_symbol() should restore original address when kallsyms_lookup() failed to find a symbol. It's reported when dumpstack shows an address in a dynamically allocated trampoline for ftrace. [ 1314.612287] [<ffffffff81700312>] dump_stack+0x45/0x56 [ 1314.612290] [<ffffffff8125f5b0>] ? meminfo_proc_open+0x30/0x30 [ 1314.612293] [<ffffffffa080a494>] kpatch_ftrace_handler+0x14/0xf0 [kpatch] [ 1314.612306] [<ffffffffa00160c4>] 0xffffffffa00160c3 You can see a difference in the hex address - c4 and c3. Fix it. Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Reported-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
-
Fabian Frederick authored
Fix checkpatch errors: "ERROR: return is not a function, parentheses are not required" Signed-off-by:
-
Fabian Frederick authored
zswap_entry_cache_destroy() is only called by __init init_zswap(). This patch also fixes function name zswap_entry_cache_ s/destory/destroy Signed-off-by:
Seth Jennings <sjennings@variantweb.net> Signed-off-by:
-
Johannes Weiner authored
Charge migration currently disables IRQs twice to update the charge statistics for the old page and then again for the new page. But migration is a seamless transition of a charge from one physical page to another one of the same size, so this should be a non-event from an accounting point of view. Leave the statistics alone. Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
-
Greg Thelen authored
Commit 6b208e3f ("mm: memcg: remove unused node/section info from pc->flags") deleted lookup_cgroup_page() but left a prototype for it. Kill the vestigial prototype. Signed-off-by:
Greg Thelen <gthelen@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Acked-by:
-
Vladimir Davydov authored
It's not used anywhere today, so let's remove it. Signed-off-by:
Vladimir Davydov <vdavydov@parallels.com> Acked-by:
-
Vladimir Davydov authored
Add forward declarations for struct pglist_data, mem_cgroup. Remove __init, __meminit from function prototypes and inline functions. Remove redundant inclusion of bit_spinlock.h. Signed-off-by:
-
Johannes Weiner authored
Pages are now uncharged at release time, and all sources of batched uncharges operate on lists of pages. Directly use those lists, and get rid of the per-task batching state. This also batches statistics accounting, in addition to the res counter charges, to reduce IRQ-disabling and re-enabling. Signed-off-by:
-
Johannes Weiner authored
The memcg uncharging code that is involved towards the end of a page's lifetime - truncation, reclaim, swapout, migration - is impressively complicated and fragile. Because anonymous and file pages were always charged before they had their page->mapping established, uncharges had to happen when the page type could still be known from the context; as in unmap for anonymous, page cache removal for file and shmem pages, and swap cache truncation for swap pages. However, these operations happen well before the page is actually freed, and so a lot of synchronization is necessary: - Charging, uncharging, page migration, and charge migration all need to take a per-page bit spinlock as they could race with uncharging. - Swap cache truncation happens during both swap-in and swap-out, and possibly repeatedly before the page is actually freed. This means that the memcg swapout code is called from many contexts that make no sense and it has to figure out the direction from page state to make sure memory and memory+swap are always correctly charged. - On page migration, the old page might be unmapped but then reused, so memcg code has to prevent untimely uncharging in that case. Because this code - which should be a simple charge transfer - is so special-cased, it is not reusable for replace_page_cache(). But now that charged pages always have a page->mapping, introduce mem_cgroup_uncharge(), which is called after the final put_page(), when we know for sure that nobody is looking at the page anymore. For page migration, introduce mem_cgroup_migrate(), which is called after the migration is successful and the new page is fully rmapped. Because the old page is no longer uncharged after migration, prevent double charges by decoupling the page's memcg association (PCG_USED and pc->mem_cgroup) from the page holding an actual charge. The new bits PCG_MEM and PCG_MEMSW represent the respective charges and are transferred to the new page during migration. mem_cgroup_migrate() is suitable for replace_page_cache() as well, which gets rid of mem_cgroup_replace_page_cache(). However, care needs to be taken because both the source and the target page can already be charged and on the LRU when fuse is splicing: grab the page lock on the charge moving side to prevent changing pc->mem_cgroup of a page under migration. Also, the lruvecs of both pages change as we uncharge the old and charge the new during migration, and putback may race with us, so grab the lru lock and isolate the pages iff on LRU to prevent races and ensure the pages are on the right lruvec afterward. Swap accounting is massively simplified: because the page is no longer uncharged as early as swap cache deletion, a new mem_cgroup_swapout() can transfer the page's memory+swap charge (PCG_MEMSW) to the swap entry before the final put_page() in page reclaim. Finally, page_cgroup changes are now protected by whatever protection the page itself offers: anonymous pages are charged under the page table lock, whereas page cache insertions, swapin, and migration hold the page lock. Uncharging happens under full exclusion with no outstanding references. Charging and uncharging also ensure that the page is off-LRU, which serializes against charge migration. Remove the very costly page_cgroup lock and set pc->flags non-atomically. [mhocko@suse.cz: mem_cgroup_charge_statistics needs preempt_disable] [vdavydov@parallels.com: fix flags definition] Signed-off-by:
Jet Chen <jet.chen@intel.com> Acked-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Johannes Weiner authored
These patches rework memcg charge lifetime to integrate more naturally with the lifetime of user pages. This drastically simplifies the code and reduces charging and uncharging overhead. The most expensive part of charging and uncharging is the page_cgroup bit spinlock, which is removed entirely after this series. Here are the top-10 profile entries of a stress test that reads a 128G sparse file on a freshly booted box, without even a dedicated cgroup (i.e. executing in the root memcg). Before: 15.36% cat [kernel.kallsyms] [k] copy_user_generic_string 13.31% cat [kernel.kallsyms] [k] memset 11.48% cat [kernel.kallsyms] [k] do_mpage_readpage 4.23% cat [kernel.kallsyms] [k] get_page_from_freelist 2.38% cat [kernel.kallsyms] [k] put_page 2.32% cat [kernel.kallsyms] [k] __mem_cgroup_commit_charge 2.18% kswapd0 [kernel.kallsyms] [k] __mem_cgroup_uncharge_common 1.92% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.86% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.62% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn After: 15.67% cat [kernel.kallsyms] [k] copy_user_generic_string 13.48% cat [kernel.kallsyms] [k] memset 11.42% cat [kernel.kallsyms] [k] do_mpage_readpage 3.98% cat [kernel.kallsyms] [k] get_page_from_freelist 2.46% cat [kernel.kallsyms] [k] put_page 2.13% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.88% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.67% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn 1.39% kswapd0 [kernel.kallsyms] [k] free_pcppages_bulk 1.30% cat [kernel.kallsyms] [k] kfree As you can see, the memcg footprint has shrunk quite a bit. text data bss dec hex filename 37970 9892 400 48262 bc86 mm/memcontrol.o.old 35239 9892 400 45531 b1db mm/memcontrol.o This patch (of 4): The memcg charge API charges pages before they are rmapped - i.e. have an actual "type" - and so every callsite needs its own set of charge and uncharge functions to know what type is being operated on. Worse, uncharge has to happen from a context that is still type-specific, rather than at the end of the page's lifetime with exclusive access, and so requires a lot of synchronization. Rewrite the charge API to provide a generic set of try_charge(), commit_charge() and cancel_charge() transaction operations, much like what's currently done for swap-in: mem_cgroup_try_charge() attempts to reserve a charge, reclaiming pages from the memcg if necessary. mem_cgroup_commit_charge() commits the page to the charge once it has a valid page->mapping and PageAnon() reliably tells the type. mem_cgroup_cancel_charge() aborts the transaction. This reduces the charge API and enables subsequent patches to drastically simplify uncharging. As pages need to be committed after rmap is established but before they are added to the LRU, page_add_new_anon_rmap() must stop doing LRU additions again. Revive lru_cache_add_active_or_unevictable(). [hughd@google.com: fix shmem_unuse] [hughd@google.com: Add comments on the private use of -EAGAIN] Signed-off-by:Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
-
Oleg Nesterov authored
Aleksei hit the soft lockup during reading /proc/PID/smaps. David investigated the problem and suggested the right fix. while_each_thread() is racy and should die, this patch updates vm_is_stack(). Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Reported-by:
Aleksei Besogonov <alex.besogonov@gmail.com> Tested-by:
David Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Joonsoo Kim authored
This reverts commit a6406168 ("slab: remove BAD_ALIEN_MAGIC"). commit a6406168 ("slab: remove BAD_ALIEN_MAGIC") assumes that the system with !CONFIG_NUMA has only one memory node. But, it turns out to be false by the report from Geert. His system, m68k, has many memory nodes and is configured in !CONFIG_NUMA. So it couldn't boot with above change. Here goes his failure report. With latest mainline, I'm getting a crash during bootup on m68k/ARAnyM: enable_cpucache failed for radix_tree_node, error 12. kernel BUG at /scratch/geert/linux/linux-m68k/mm/slab.c:1522! *** TRAP #7 *** FORMAT=0 Current process id is 0 BAD KERNEL TRAP: 00000000 Modules linked in: PC: [<0039c92c>] kmem_cache_init_late+0x70/0x8c SR: 2200 SP: 00345f90 a2: 0034c2e8 d0: 0000003d d1: 00000000 d2: 00000000 d3: 003ac942 d4: 00000000 d5: 00000000 a0: 0034f686 a1: 0034f682 Process swapper (pid: 0, task=0034c2e8) Frame format=0 Stack from 00345fc4: 002f69ef 002ff7e5 000005f2 000360fa 0017d806 003921d4 00000000 00000000 00000000 00000000 00000000 00000000 003ac942 00000000 003912d6 Call Trace: [<000360fa>] parse_args+0x0/0x2ca [<0017d806>] strlen+0x0/0x1a [<003921d4>] start_kernel+0x23c/0x428 [<003912d6>] _sinittext+0x2d6/0x95e Code: f7e5 4879 002f 69ef 61ff ffca 462a 4e47 <4879> 0035 4b1c 61ff fff0 0cc4 7005 23c0 0037 fd20 588f 265f 285f 4e75 48e7 301c Disabling lock debugging due to kernel taint Kernel panic - not syncing: Attempted to kill the idle task! Although there is a alternative way to fix this issue such as disabling use of alien cache on !CONFIG_NUMA, but, reverting issued commit is better to me in this time. Signed-off-by:
Joonsoo Kim <iamjoonsoo.kim@lge.com> Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by:
-
- 07 Aug, 2014 9 commits
-
-
git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds authored
Pull microblaze updates from Michal Simek: - add new syscall and fix comment - fix udelay implementation - fix libgcc for modules * tag 'microblaze-3.17-rc1' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Change libgcc-style functions from lib-y to obj-y microblaze: Wire-up renameat2 syscall microblaze: Add syscall number comment microblaze: delay.h fix udelay and ndelay for 8 bit args
-
git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32Linus Torvalds authored
Pull avr32 fix from Hans-Christian Egtvedt. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32: avr32: fix error return code
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
Pull powerpc updates from Ben Herrenschmidt: "This is the powerpc new goodies for 3.17. The short story: The biggest bit is Michael removing all of pre-POWER4 processor support from the 64-bit kernel. POWER3 and rs64. This gets rid of a ton of old cruft that has been bitrotting in a long while. It was broken for quite a few versions already and nobody noticed. Nobody uses those machines anymore. While at it, he cleaned up a bunch of old dusty cabinets, getting rid of a skeletton or two. Then, we have some base VFIO support for KVM, which allows assigning of PCI devices to KVM guests, support for large 64-bit BARs on "powernv" platforms, support for HMI (Hardware Management Interrupts) on those same platforms, some sparse-vmemmap improvements (for memory hotplug), There is the usual batch of Freescale embedded updates (summary in the merge commit) and fixes here or there, I think that's it for the highlights" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (102 commits) powerpc/eeh: Export eeh_iommu_group_to_pe() powerpc/eeh: Add missing #ifdef CONFIG_IOMMU_API powerpc: Reduce scariness of interrupt frames in stack traces powerpc: start loop at section start of start in vmemmap_populated() powerpc: implement vmemmap_free() powerpc: implement vmemmap_remove_mapping() for BOOK3S powerpc: implement vmemmap_list_free() powerpc: Fail remap_4k_pfn() if PFN doesn't fit inside PTE powerpc/book3s: Fix endianess issue for HMI handling on napping cpus. powerpc/book3s: handle HMIs for cpus in nap mode. powerpc/powernv: Invoke opal call to handle hmi. powerpc/book3s: Add basic infrastructure to handle HMI in Linux. powerpc/iommu: Fix comments with it_page_shift powerpc/powernv: Handle compound PE in config accessors powerpc/powernv: Handle compound PE for EEH powerpc/powernv: Handle compound PE powerpc/powernv: Split ioda_eeh_get_state() powerpc/powernv: Allow to freeze PE powerpc/powernv: Enable M64 aperatus for PHB3 powerpc/eeh: Aux PE data for error log ...
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS updates from Ralf Baechle: "This is the main pull request for 3.17. It contains: - misc Cavium Octeon, BCM47xx, BCM63xx and Alchemy updates - MIPS ptrace updates and cleanups - various fixes that will also go to -stable - a number of cleanups and small non-critical fixes. - NUMA support for the Loongson 3. - more support for MSA - support for MAAR - various FP enhancements and fixes" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (139 commits) MIPS: jz4740: remove unnecessary null test before debugfs_remove MIPS: Octeon: remove unnecessary null test before debugfs_remove_recursive MIPS: ZBOOT: implement stack protector in compressed boot phase MIPS: mipsreg: remove duplicate MIPS_CONF4_FTLBSETS_SHIFT MIPS: Bonito64: remove a duplicate define MIPS: Malta: initialise MAARs MIPS: Initialise MAARs MIPS: detect presence of MAARs MIPS: define MAAR register accessors & bits MIPS: mark MSA experimental MIPS: Don't build MSA support unless it can be used MIPS: consistently clear MSA flags when starting & copying threads MIPS: 16 byte align MSA vector context MIPS: disable preemption whilst initialising MSA MIPS: ensure MSA gets disabled during boot MIPS: fix read_msa_* & write_msa_* functions on non-MSA toolchains MIPS: fix MSA context for tasks which don't use FP first MIPS: init upper 64b of vector registers when MSA is first used MIPS: save/disable MSA in lose_fpu MIPS: preserve scalar FP CSR when switching vector context ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 updates from Martin Schwidefsky: "Mostly cleanups and bug-fixes, with two exceptions. The first is lazy flushing of I/O-TLBs for PCI to improve performance, the second is software dirty bits in the pmd for the madvise-free implementation" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (24 commits) s390/locking: Reenable optimistic spinning s390/mm: implement dirty bits for large segment table entries KVM: s390/mm: Fix page table locking vs. split pmd lock s390/dasd: fix camel case s390/3215: fix hanging console issue s390/irq: improve displayed interrupt order in /proc/interrupts s390/seccomp: fix error return for filtered system calls s390/pci: introduce lazy IOTLB flushing for DMA unmap dasd: fix error recovery for alias devices during format dasd: fix list_del corruption during format dasd: fix unresponsive device during format dasd: use aliases for formatted devices during format s390/pci: fix kmsg component s390/kdump: Return NOTIFY_OK for all actions other than MEM_GOING_OFFLINE s390/watchdog: Fix module name in Kconfig help text s390/dasd: replace seq_printf by seq_puts s390/dasd: replace pr_warning by pr_warn s390/dasd: Move EXPORT_SYMBOL after function/variable s390/dasd: remove unnecessary null test before debugfs_remove s390/zfcp: use qdio buffer helpers ...
-
Julia Lawall authored
Convert a zero return value on error to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e1,e2; @@ ( if (\(ret < 0\|ret != 0\)) { ... return ret; } | ret = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Acked-by:
Hans-Christian Egtvedt <egtvedt@samfundet.no>
-
Linus Torvalds authored
Merge incoming from Andrew Morton: - Various misc things. - arch/sh updates. - Part of ocfs2. Review is slow. - Slab updates. - Most of -mm. - printk updates. - lib/ updates. - checkpatch updates. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (226 commits) checkpatch: update $declaration_macros, add uninitialized_var checkpatch: warn on missing spaces in broken up quoted checkpatch: fix false positives for --strict "space after cast" test checkpatch: fix false positive MISSING_BREAK warnings with --file checkpatch: add test for native c90 types in unusual order checkpatch: add signed generic types checkpatch: add short int to c variable types checkpatch: add for_each tests to indentation and brace tests checkpatch: fix brace style misuses of else and while checkpatch: add --fix option for a couple OPEN_BRACE misuses checkpatch: use the correct indentation for which() checkpatch: add fix_insert_line and fix_delete_line helpers checkpatch: add ability to insert and delete lines to patch/file checkpatch: add an index variable for fixed lines checkpatch: warn on break after goto or return with same tab indentation checkpatch: emit a warning on file add/move/delete checkpatch: add test for commit id formatting style in commit log checkpatch: emit fewer kmalloc_array/kcalloc conversion warnings checkpatch: improve "no space after cast" test checkpatch: allow multiple const * types ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "This fixes the most immediate fallout from yesterday's networking merge: 1) sock_tx_timestamp() must not clear the passed in tx_flags, but rather add to them. Fix from Eric Dumazet. 2) The hyperv driver sendbuf region increase needs to be decreased slightly to handle older backends. From KY Srinivasan. 3) Fix RCU lockdep splats in netlink diag after recent hashing changes, from Thomas Graf. 4) The new IPV6_FLOWLABEL was given a socket option number that overlapped with an existing IP6 tables one, breaking ip6_tables. Fixed by Pablo Neira Ayuso" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: netlink: hold nl_sock_hash_lock during diag dump tcp: md5: check md5 signature without socket lock net: fix USB network driver config option. net: reallocate new socket option number for IPV6_AUTOFLOWLABEL vmxnet3: fix decimal printf format specifiers prefixed with 0x net-timestamp: cumulative tcp timestamping fixes hyperv: Adjust the size of sendbuf region to support ws2008r2 cxgb4: Fix for SR-IOV VF initialization net-timestamp: sock_tx_timestamp() fix -
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivialLinus Torvalds authored
Pull trivial tree changes from Jiri Kosina: "Summer edition of trivial tree updates" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits) doc: fix two typos in watchdog-api.txt irq-gic: remove file name from heading comment MAINTAINERS: Add miscdevice.h to file list for char/misc drivers. scsi: mvsas: mv_sas.c: Fix for possible null pointer dereference doc: replace "practise" with "practice" in Documentation befs: remove check for CONFIG_BEFS_RW scsi: doc: fix 'SCSI_NCR_SETUP_MASTER_PARITY' drivers/usb/phy/phy.c: remove a leading space mfd: fix comment cpuidle: fix comment doc: hpfall.c: fix missing null-terminate after strncpy call usb: doc: hotplug.txt code typos kbuild: fix comment in Makefile.modinst SH: add proper prompt to SH_MAGIC_PANEL_R2_VERSION ARM: msm: Remove MSM_SCM crypto: Remove MPILIB_EXTRA doc: CN: remove dead link, kerneltrap.org no longer works media: update reference, kerneltrap.org no longer works hexagon: update reference, kerneltrap.org no longer works doc: LSM: update reference, kerneltrap.org no longer works ...
-
