- 29 Nov, 2017 40 commits
-
-
Eric Biggers authored
Now that the generic ChaCha20 implementation no longer needs a cra_alignmask, the x86 one doesn't either -- given that the x86 implementation doesn't need the alignment itself. Signed-off-by:
Eric Biggers <ebiggers@google.com> Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Eric Biggers authored
Now that crypto_chacha20_setkey() and crypto_chacha20_init() use the unaligned access macros and crypto_xor() also accepts unaligned buffers, there is no need to have a cra_alignmask set for chacha20-generic. Signed-off-by:
-
Eric Biggers authored
The generic ChaCha20 implementation has a cra_alignmask of 3, which ensures that the key passed into crypto_chacha20_setkey() and the IV passed into crypto_chacha20_init() are 4-byte aligned. However, these functions are also called from the ARM and ARM64 implementations of ChaCha20, which intentionally do not have a cra_alignmask set. This is broken because 32-bit words are being loaded from potentially-unaligned buffers without the unaligned access macros. Fix it by using the unaligned access macros when loading the key and IV. Signed-off-by:
-
Eric Biggers authored
The four 32-bit constants for the initial state of ChaCha20 were loaded from a char array which is not guaranteed to have the needed alignment. Fix it by just assigning the constants directly instead. Signed-off-by:
-
Jon Maxwell authored
Make the cryptd queue length configurable. We recently had customer where this needed to be tuned to accommodate the aesni_intel module and prevent packet drop. Signed-off-by:
Jon Maxwell <jmaxwell37@gmail.com> Signed-off-by:
-
Ard Biesheuvel authored
Most crypto drivers involving kernel mode NEON take care to put the code that actually touches the NEON register file in a separate compilation unit, to prevent the compiler from reordering code that preserves or restores the NEON context with code that may corrupt it. This is necessary because we currently have no way to express the restrictions imposed upon use of the NEON in kernel mode in a way that the compiler understands. However, in the case of aes-ce-cipher, it did not seem unreasonable to deviate from this rule, given how it does not seem possible for the compiler to reorder cross object function calls with asm blocks whose in- and output constraints reflect that it reads from and writes to memory. Now that LTO is being proposed for the arm64 kernel, it is time to revisit this. The link time optimization may replace the function calls to kernel_neon_begin() and kernel_neon_end() with instantiations of the IR that make up its implementation, allowing further reordering with the asm block. So let's clean this up, and move the asm() blocks into a separate .S file. Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
Christophe Jaillet authored
'dev' is leaking in the error handling path of 'hifn_probe()'. Add a 'kfree(dev)' to match the code in 'hifn_remove()' Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> Signed-off-by:
-
Yang Shi authored
Preempt counter APIs have been split out, currently, hardirq.h just includes irq_enter/exit APIs which are not used by crypto at all. So, remove the unused hardirq.h. Signed-off-by:
Yang Shi <yang.s@alibaba-inc.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-crypto@vger.kernel.org Signed-off-by:
-
Atul Gupta authored
register xfrmdev_ops callbacks, Send IPsec tunneled data to HW for inline processing. The driver use hardware crypto accelerator to encrypt and generate ICV for the transmitted packet in Inline mode. Signed-off-by:
Atul Gupta <atul.gupta@chelsio.com> Signed-off-by:
Harsh Jain <harsh@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
Atul Gupta authored
Added Tx routine for ULD - define interface for ULD Tx. Export routines used for Tx data - Routines common for data transmit are used by cxgb4 and chcr drivers. - EXPORT routines enable transmit from chcr driver. Signed-off-by:
-
Gilad Ben-Yossef authored
The Arm TrustZone CryptoCell is a hardware security engine. This patch adds DT bindings for its Rich Execution Environment crypto engine. A driver supporting this device is already present in the staging tree. Signed-off-by:
Gilad Ben-Yossef <gilad@benyossef.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Colin Ian King authored
The object info is being leaked on an error return path, fix this by setting ret to -ENOMEM and exiting via the request_cleanup path that will free info. Detected by CoverityScan, CID#1408439 ("Resource Leak") Fixes: c694b233 ("crypto: cavium - Add the Virtual Function driver for CPT") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Geert Uytterhoeven authored
On 32-bit (e.g. with m68k-linux-gnu-gcc-4.1): crypto/keywrap.c: In function ‘crypto_kw_decrypt’: crypto/keywrap.c:191: warning: integer constant is too large for ‘long’ type crypto/keywrap.c: In function ‘crypto_kw_encrypt’: crypto/keywrap.c:224: warning: integer constant is too large for ‘long’ type Fixes: 9e49451d ("crypto: keywrap - simplify code") Signed-off-by:Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by:
Stephan Mueller <smueller@chronox.de> Signed-off-by:
-
Tudor-Dan Ambarus authored
Results better code readability. Signed-off-by:
Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in pr_err error message text. Also fix spelling mistake in proceeding comment. Signed-off-by:
Haren Myneni <haren@us.ibm.com> Signed-off-by:
-
Martin Kepplinger authored
A few years ago the FSF moved and "59 Temple Place" is wrong. Having this still in our source files feels old and unmaintained. Let's take the license statement serious and not confuse users. As https://www.gnu.org/licenses/gpl-howto.html suggests, we replace the postal address with "<http://www.gnu.org/licenses/>". Signed-off-by:
Martin Kepplinger <martink@posteo.de> Signed-off-by:
-
Pierre authored
If crypto_get_default_rng returns an error, the function ecc_gen_privkey should return an error. Instead, it currently tries to use the default_rng nevertheless, thus creating a kernel panic with a NULL pointer dereference. Returning the error directly, as was supposedly intended when looking at the code, fixes this. Signed-off-by:
Pierre Ducroquet <pinaraf@pinaraf.info> Reviewed-by:
-
Dan Carpenter authored
This code seems correct, but the goto was indented too far. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Dan Carpenter authored
The dma_map_sg() function returns zero on error and positive values on success. We want to return -ENOMEM on failure here and zero on success. Fixes: 2f47d580 ("crypto: chelsio - Move DMA un/mapping to chcr from lld cxgb4 driver") Signed-off-by:
-
Colin Ian King authored
Pointer reqctx is assigned the same value twice, once on initialization and again a few statements later, remove the second redundant assignment. Variable dst_size is assigned but it is never read, so the variable is redundant and can be removed. Cleans up clang warnings: drivers/crypto/chelsio/chcr_algo.c:156:29: warning: Value stored to 'reqctx' during its initialization is never read drivers/crypto/chelsio/chcr_algo.c:2020:2: warning: Value stored to 'dst_size' is never read Signed-off-by:
-
Florian Fainelli authored
bcm2835-rng is now capable of supporting the BCM63xx hardware, so remove the driver which duplicates the same functionality. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
-
Florian Fainelli authored
We have now incorporated all necessary functionality for the BCM63xx platforms to successfully migrate over bcm2835-rng, so add the final bits: Kconfig selection and proper platform_device device type matching to keep the same platform device name for registration to work. Signed-off-by:
-
Florian Fainelli authored
Since the same block is used on BCM2835 and BCM6368, merge the bindings and remove the brcm,bcm6368.txt binding document. Acked-by:
-
Florian Fainelli authored
Broadcom MIPS HW is always strapped to match the system-wide endian such that all I/O access to this RNG block is done with the native CPU endian, account for that. Signed-off-by:
-
Florian Fainelli authored
In preparation for allowing BCM63xx to use this driver, we abstract I/O accessors such that we can easily change those later on. Signed-off-by:
-
Florian Fainelli authored
One of the last steps before bcm63xx-rng can be eliminated is to manage a clock during hwrng::init and hwrng::cleanup, so fetch it in the probe function, and manage it during these two steps when valid. Signed-off-by:
-
Florian Fainelli authored
The interrupt masking done for Northstart Plus and Northstar (BCM5301X) is moved from being a function pointer mapped to of_device_id::data into a proper part of the hwrng::init callback. While at it, we also make the of_data be a proper structure indicating the platform specifics, since the day we need to add a second type of platform information, we would have to do that anyway. Signed-off-by:
-
Florian Fainelli authored
Now that we have moved the RNG disabling into a hwrng::cleanup callback, we can use the device managed registration operation and remove our remove callback since it won't do anything necessary. Signed-off-by:
-
Florian Fainelli authored
We should be disabling the RNG in a hwrng::cleanup callback if we are not longer the system selected RNG, not wait until the device driver is removed. Signed-off-by:
-
Florian Fainelli authored
We should be moving the enabling of the HWRNG into a hwrng::init callback since we can be disabled and enabled every time a different hwrng is selected in the system. Signed-off-by:
-
Florian Fainelli authored
Instead of making hwrng::priv host the base register address, define a driver private context, make it per platform device instance and pass it down the different functions. Signed-off-by:
-
Florian Fainelli authored
In preparation for consolidating bcm63xx-rng into bcm2835-rng, make sure that we obtain the base register via platform_get_resource() since we need to support the non-DT enabled MIPS-based BCM63xx DSL SoCs. Signed-off-by:
-
Fabien DESSENNE authored
This module registers block cipher algorithms that make use of the STMicroelectronics STM32 crypto "CRYP1" hardware. The following algorithms are supported: - aes: ecb, cbc, ctr - des: ecb, cbc - tdes: ecb, cbc Signed-off-by:
Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by:
-
Fabien DESSENNE authored
Document device tree bindings for the STM32 CRYP. Signed-off-by:
-
Robert Baronescu authored
In case buffer length is a multiple of PAGE_SIZE, the S/G table is incorrectly generated. Fix this by handling buflen = k * PAGE_SIZE separately. Signed-off-by:
Robert Baronescu <robert.baronescu@nxp.com> Signed-off-by:
-
Eric Biggers authored
When asked to encrypt or decrypt 0 bytes, both the generic and x86 implementations of Salsa20 crash in blkcipher_walk_done(), either when doing 'kfree(walk->buffer)' or 'free_page((unsigned long)walk->page)', because walk->buffer and walk->page have not been initialized. The bug is that Salsa20 is calling blkcipher_walk_done() even when nothing is in 'walk.nbytes'. But blkcipher_walk_done() is only meant to be called when a nonzero number of bytes have been provided. The broken code is part of an optimization that tries to make only one call to salsa20_encrypt_bytes() to process inputs that are not evenly divisible by 64 bytes. To fix the bug, just remove this "optimization" and use the blkcipher_walk API the same way all the other users do. Reproducer: #include <linux/if_alg.h> #include <sys/socket.h> #include <unistd.h> int main() { int algfd, reqfd; struct sockaddr_alg addr = { .salg_type = "skcipher", .salg_name = "salsa20", }; char key[16] = { 0 }; algfd = socket(AF_ALG, SOCK_SEQPACKET, 0); bind(algfd, (void *)&addr, sizeof(addr)); reqfd = accept(algfd, 0, 0); setsockopt(algfd, SOL_ALG, ALG_SET_KEY, key, sizeof(key)); read(reqfd, key, sizeof(key)); } Reported-by:syzbot <syzkaller@googlegroups.com> Fixes: eb6f13eb ("[CRYPTO] salsa20_generic: Fix multi-page processing") Cc: <stable@vger.kernel.org> # v2.6.25+ Signed-off-by:
-
Eric Biggers authored
Because the HMAC template didn't check that its underlying hash algorithm is unkeyed, trying to use "hmac(hmac(sha3-512-generic))" through AF_ALG or through KEYCTL_DH_COMPUTE resulted in the inner HMAC being used without having been keyed, resulting in sha3_update() being called without sha3_init(), causing a stack buffer overflow. This is a very old bug, but it seems to have only started causing real problems when SHA-3 support was added (requires CONFIG_CRYPTO_SHA3) because the innermost hash's state is ->import()ed from a zeroed buffer, and it just so happens that other hash algorithms are fine with that, but SHA-3 is not. However, there could be arch or hardware-dependent hash algorithms also affected; I couldn't test everything. Fix the bug by introducing a function crypto_shash_alg_has_setkey() which tests whether a shash algorithm is keyed. Then update the HMAC template to require that its underlying hash algorithm is unkeyed. Here is a reproducer: #include <linux/if_alg.h> #include <sys/socket.h> int main() { int algfd; struct sockaddr_alg addr = { .salg_type = "hash", .salg_name = "hmac(hmac(sha3-512-generic))", }; char key[4096] = { 0 }; algfd = socket(AF_ALG, SOCK_SEQPACKET, 0); bind(algfd, (const struct sockaddr *)&addr, sizeof(addr)); setsockopt(algfd, SOL_ALG, ALG_SET_KEY, key, sizeof(key)); } Here was the KASAN report from syzbot: BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:341 [inline] BUG: KASAN: stack-out-of-bounds in sha3_update+0xdf/0x2e0 crypto/sha3_generic.c:161 Write of size 4096 at addr ffff8801cca07c40 by task syzkaller076574/3044 CPU: 1 PID: 3044 Comm: syzkaller076574 Not tainted 4.14.0-mm1+ #25 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 print_address_description+0x73/0x250 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x25b/0x340 mm/kasan/report.c:409 check_memory_region_inline mm/kasan/kasan.c:260 [inline] check_memory_region+0x137/0x190 mm/kasan/kasan.c:267 memcpy+0x37/0x50 mm/kasan/kasan.c:303 memcpy include/linux/string.h:341 [inline] sha3_update+0xdf/0x2e0 crypto/sha3_generic.c:161 crypto_shash_update+0xcb/0x220 crypto/shash.c:109 shash_finup_unaligned+0x2a/0x60 crypto/shash.c:151 crypto_shash_finup+0xc4/0x120 crypto/shash.c:165 hmac_finup+0x182/0x330 crypto/hmac.c:152 crypto_shash_finup+0xc4/0x120 crypto/shash.c:165 shash_digest_unaligned+0x9e/0xd0 crypto/shash.c:172 crypto_shash_digest+0xc4/0x120 crypto/shash.c:186 hmac_setkey+0x36a/0x690 crypto/hmac.c:66 crypto_shash_setkey+0xad/0x190 crypto/shash.c:64 shash_async_setkey+0x47/0x60 crypto/shash.c:207 crypto_ahash_setkey+0xaf/0x180 crypto/ahash.c:200 hash_setkey+0x40/0x90 crypto/algif_hash.c:446 alg_setkey crypto/af_alg.c:221 [inline] alg_setsockopt+0x2a1/0x350 crypto/af_alg.c:254 SYSC_setsockopt net/socket.c:1851 [inline] SyS_setsockopt+0x189/0x360 net/socket.c:1830 entry_SYSCALL_64_fastpath+0x1f/0x96 Reported-by: -
Eric Biggers authored
af_alg_free_areq_sgls() If allocating the ->tsgl member of 'struct af_alg_async_req' failed, during cleanup we dereferenced the NULL ->tsgl pointer in af_alg_free_areq_sgls(), because ->tsgl_entries was nonzero. Fix it by only freeing the ->tsgl list if it is non-NULL. This affected both algif_skcipher and algif_aead. Fixes: e870456d ("crypto: algif_skcipher - overhaul memory management") Fixes: d887c52d ("crypto: algif_aead - overhaul memory management") Reported-by:
-
Eric Biggers authored
In the AEAD interface for AF_ALG, the reference to the "null skcipher" held by each tfm was being dropped in the wrong place -- when each af_alg_ctx was freed instead of when the aead_tfm was freed. As discovered by syzkaller, a specially crafted program could use this to cause the null skcipher to be freed while it is still in use. Fix it by dropping the reference in the right place. Fixes: 72548b09 ("crypto: algif_aead - copy AAD from src to dst") Reported-by:
-
Eric Biggers authored
In rsa_get_n(), if the buffer contained all 0's and "FIPS mode" is enabled, we would read one byte past the end of the buffer while scanning the leading zeroes. Fix it by checking 'n_sz' before '!*ptr'. This bug was reachable by adding a specially crafted key of type "asymmetric" (requires CONFIG_RSA and CONFIG_X509_CERTIFICATE_PARSER). KASAN report: BUG: KASAN: slab-out-of-bounds in rsa_get_n+0x19e/0x1d0 crypto/rsa_helper.c:33 Read of size 1 at addr ffff88003501a708 by task keyctl/196 CPU: 1 PID: 196 Comm: keyctl Not tainted 4.14.0-09238-g1d3b78bb #26 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 Call Trace: rsa_get_n+0x19e/0x1d0 crypto/rsa_helper.c:33 asn1_ber_decoder+0x82a/0x1fd0 lib/asn1_decoder.c:328 rsa_set_pub_key+0xd3/0x320 crypto/rsa.c:278 crypto_akcipher_set_pub_key ./include/crypto/akcipher.h:364 [inline] pkcs1pad_set_pub_key+0xae/0x200 crypto/rsa-pkcs1pad.c:117 crypto_akcipher_set_pub_key ./include/crypto/akcipher.h:364 [inline] public_key_verify_signature+0x270/0x9d0 crypto/asymmetric_keys/public_key.c:106 x509_check_for_self_signed+0x2ea/0x480 crypto/asymmetric_keys/x509_public_key.c:141 x509_cert_parse+0x46a/0x620 crypto/asymmetric_keys/x509_cert_parser.c:129 x509_key_preparse+0x61/0x750 crypto/asymmetric_keys/x509_public_key.c:174 asymmetric_key_preparse+0xa4/0x150 crypto/asymmetric_keys/asymmetric_type.c:388 key_create_or_update+0x4d4/0x10a0 security/keys/key.c:850 SYSC_add_key security/keys/keyctl.c:122 [inline] SyS_add_key+0xe8/0x290 security/keys/keyctl.c:62 entry_SYSCALL_64_fastpath+0x1f/0x96 Allocated by task 196: __do_kmalloc mm/slab.c:3711 [inline] __kmalloc_track_caller+0x118/0x2e0 mm/slab.c:3726 kmemdup+0x17/0x40 mm/util.c:118 kmemdup ./include/linux/string.h:414 [inline] x509_cert_parse+0x2cb/0x620 crypto/asymmetric_keys/x509_cert_parser.c:106 x509_key_preparse+0x61/0x750 crypto/asymmetric_keys/x509_public_key.c:174 asymmetric_key_preparse+0xa4/0x150 crypto/asymmetric_keys/asymmetric_type.c:388 key_create_or_update+0x4d4/0x10a0 security/keys/key.c:850 SYSC_add_key security/keys/keyctl.c:122 [inline] SyS_add_key+0xe8/0x290 security/keys/keyctl.c:62 entry_SYSCALL_64_fastpath+0x1f/0x96 Fixes: 5a7de973 ("crypto: rsa - return raw integers for the ASN.1 parser") Cc: <stable@vger.kernel.org> # v4.8+ Cc: Tudor Ambarus <tudor-dan.ambarus@nxp.com> Signed-off-by:James Morris <james.l.morris@oracle.com> Reviewed-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
