- 11 Aug, 2010 40 commits
-
-
Joe Perches authored
Commit 1d794e3b ("Staging: wavelan: delete the driver") removed the source, so remove the documentation as well. Signed-off-by:
Joe Perches <joe@perches.com> Cc: Jean Tourrilhes <jt@hpl.hp.com> Acked-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Randy Dunlap authored
Fix mtd/nand_base.c kernel-doc warnings and typos. Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'mtd' Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'ofs' Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'len' Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'invert' Warning(drivers/mtd/nand/nand_base.c:930): No description found for parameter 'mtd' Warning(drivers/mtd/nand/nand_base.c:930): No description found for parameter 'ofs' Warning(drivers/mtd/nand/nand_base.c:930): No description found for parameter 'len' Warning(drivers/mtd/nand/nand_base.c:987): No description found for parameter 'mtd' Warning(drivers/mtd/nand/nand_base.c:987): No description found for parameter 'ofs' Warning(drivers/mtd/nand/nand_base.c:987): No description found for parameter 'len' Warning(drivers/mtd/nand/nand_base.c:2087): No description found for parameter 'len' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by:
-
Randy Dunlap authored
Fix (delete) empty kernel-doc lines/warnings: Warning(drivers/message/fusion/mptbase.c:6916): bad line: Warning(drivers/message/fusion/mptbase.c:7060): bad line: Signed-off-by:
-
Changli Gao authored
Signed-off-by:
Changli Gao <xiaosuo@gmail.com> Signed-off-by:
-
Andrew Morton authored
Cc: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by:
-
Kulikov Vasiliy authored
If iga_init() fails, code releases resources and continues to use it. It seems that after releasing resources 'return' should be. Signed-off-by:
Kulikov Vasiliy <segooon@gmail.com> Signed-off-by:
-
Daniel De Graaf authored
When we setup up the VMA flags for the mmap flag and we end up using the fallback mmap functionality we set the vma->vm_flags |= VM_IO. However we neglect to propagate the flag to the vma->vm_page_prot. This bug was found when Linux kernel was running under Xen. In that scenario, any page that has VM_IO flag to it, means that it MUST be a MMIO/VRAM backend memory , _not_ System RAM. That is what the fbmem.c does: sets VM_IO, ioremaps the region - everything is peachy. Well, not exactly. The vm_page_prot does not get the relevant PTE flags set (_PAGE_IOMAP) which under Xen is a death-kneel to pages that are referencing real physical devices but don't have that flag set. This patch fixes this. Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
Daniel De Graaf <dgdegra@tycho.nsa.gov> Tested-by:
Eamon Walsh <ewalsh@tycho.nsa.gov> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by:
-
Maurus Cuelenaere authored
Since "s3c-fb: Automatically calculate pixel clock when none is given", there's no need for manually calculating the pixel clock anymore so remove these lines and add the correct refresh rate where appropriately. Signed-off-by:
Maurus Cuelenaere <mcuelenaere@gmail.com> Cc: Pawel Osciak <p.osciak@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Maurus Cuelenaere authored
Add a simple algorithm which calculates the pixel clock based on the video mode parameters. This is only done when no pixel clock is supplied through the platform data. This allows drivers to omit the pixel clock data and thus share the algorithm used for calculating it. Signed-off-by:
Donghwa Lee <yiffie9819@gmail.com> Signed-off-by:
-
Pawel Osciak authored
S5PV210 SoCs allow enabling/disabling DMA channels per window. For a window to display data from framebuffer memory, its channel has to be enabled. Signed-off-by:
Pawel Osciak <p.osciak@samsung.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by:
-
Marek Szyprowski authored
This patch fixes the following section mismatch errors: WARNING: vmlinux.o(.data+0x20b40): Section mismatch in reference from the variable s3c_fb_driver_ids to the (unknown reference) .devinit.data:(unknown) The variable s3c_fb_driver_ids references the (unknown reference) __devinitdata (unknown) If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, WARNING: vmlinux.o(.data+0x20b58): Section mismatch in reference from the variable s3c_fb_driver_ids to the (unknown reference) .devinit.data:(unknown) The variable s3c_fb_driver_ids references the (unknown reference) __devinitdata (unknown) If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, WARNING: vmlinux.o(.data+0x20b70): Section mismatch in reference from the variable s3c_fb_driver_ids to the (unknown reference) .devinit.data:(unknown) The variable s3c_fb_driver_ids references the (unknown reference) __devinitdata (unknown) If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Signed-off-by:
-
Pawel Osciak authored
Newer hardware (S3C6410, S5P) have the ability to block updates from shadow registers during reconfiguration. Add protect calls for set_par and clear protection when resetting. Signed-off-by:
-
Pawel Osciak authored
S3C64xx and S5P OSD registers for OSD size and alpha are as follows: VIDOSDC: win 0 - size, win 1-4: alpha VIDOSDD: win 1-2 - size; not present for windows 0, 3 and 4 Signed-off-by:
-
Pawel Osciak authored
S5PV210 allows per-window locking of register value updates from shadow registers. Signed-off-by:
-
Pawel Osciak authored
Signed-off-by:
-
Pawel Osciak authored
Add VSYNC interrupt support and an ioctl that allows waiting for it. Interrupts are turned on only when needed. Signed-off-by:
-
Pawel Osciak authored
Supports all bpp modes. The PRTCON register is used to disable in-hardware updates of registers that store start and end addresses of framebuffer memory. This prevents display corruption in case we do not make it before VSYNC with updating them atomically. With this feature there is no need to wait for a VSYNC interrupt before each such update. Signed-off-by:
-
Pawel Osciak authored
Add framebuffer device name initialization calls for S3C2443, S3C64xx and S5P machines. Signed-off-by:
-
Pawel Osciak authored
S5PC100 and S5PV210 framebuffer devices differ slightly in terms of available registers and their driver data structures have to be separate. Those differences include dissimilar ways to control shadow register updates. Signed-off-by:
-
Pawel Osciak authored
FRAMESEL1 bitfield starts on 13th bit, not on 14th. Signed-off-by:
Ben Dooks <ben-linux@fluff.org> Cc: InKi Dae <inki.dae@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Pawel Osciak authored
The following problems were found in the above situation: sfb->windows[win] was being assigned at the end of s3c_fb_probe_win only. This resulted in passing a NULL to s3c_fb_release_win if probe_win returned early and a memory leak. dma_free_writecombine does not allow its third argument to be NULL. fb_dealloc_cmap does not verify whether its argument is not NULL. Signed-off-by:
-
Ben Dooks authored
Remove the palette setup code from the header files and put it into the main driver. Signed-off-by:
-
Ben Dooks authored
Update the variant and window variant structures with the necessary changes to support the older style of hardware where these are not in the same place. Add the support for the s3c2443/s3c2416 hardware by using the platform-device s3c2443 to cover both, and add the initialisation data for these. Also change to including just the v4 header files for the moment until the last of the merging of these is sorted out. Signed-off-by:
-
Ben Dooks authored
Remove the various header files that configure this driver and use the platform device name to select the correct configuration at probe time. Currently this does not remove the header files, only updates the driver and the relevant platform files. Signed-off-by:
-
Ben Dooks authored
The driver clears all windows, but also sets the windows' colour key controls at the same time. However, the last window does not have these registers as it is always blended into the previous window. Move the colour key initialisation into the probe, and run it for only nr_win-1 windows. Signed-off-by:
-
InKi Dae authored
It has been working fine at 16bpp but in case of pixel format more then 24bpp it would occur distortedness situation on that mode. so this patch set the word swap control bit of WINCONx to 1 as default value. but it should be set to 0 in case that each ENLOCAL bit of WINCON0 ~ 2 registers is enabled. this issue would be solved with local path feature soon. Signed-off-by:
InKi Dae <inki.dae@samsung.com> Reviewed-by: KyungMin Park <kyungmin.park.samsung.com> Signed-off-by:
-
InKi Dae authored
s5pv210 has five window layers (window0 ~ 4), among them, window0 ~ 2 could be used for local path with fimc(capture device) and fimd writeback feature so this patch makes default window layer for UI to be set at machine code. Signed-off-by:
-
Ben Dooks authored
As suggested by Marek Szyprowski, we should make the driver depend on the configuration currently being used to build the platform device into the kernel. Signed-off-by:
-
Denys Vlasenko authored
Replaced !strlen(str) check with !str[0]. Removed the variable which was used solely to store strlen result. Signed-off-by:
Denys Vlasenko <vda.linux@googlemail.com> Signed-off-by:
-
Denys Vlasenko authored
This patch uninlines four similar functions, foo_update_attr(), in four fbcon-related files. These functions contain loops, two of theam have _nested_ loops, and they have more than one callsite each. I think they should not be inlined. Signed-off-by:
-
Denys Vlasenko authored
This function's body is good two screenfuls and it has six callsites. No apparent reason why it is marked inline. Signed-off-by:
-
Henrik Kretzschmar authored
Remove 43 section mismatches by moving the two structures efifb_defined and efifb_fix from .init.data to .devinit.data. Also the two structure arrays dmi_system_table[] and dmi_list[] have been moved from .data to .init.rodata and .init.data, which saves, if built-in, some space. On x86_64 'size -A' showed that these sections changed size: efifb.o: section size-old size-new .data 1200 688 .init.data 7840 512 .init.rodata 0 7568 .devinit.data 0 256 Total 11927 11911 Signed-off-by:
Henrik Kretzschmar <henne@nachtwindheim.de> Cc: Peter Jones <pjones@redhat.com> Signed-off-by:
-
Gregory Bean authored
Add support for Semtech SX150-series I2C GPIO expanders. Compatible models include: 8 bits: sx1508q 16 bits: sx1509q Signed-off-by:
Gregory Bean <gbean@codeaurora.org> Cc: David Brownell <david-b@pacbell.net> Cc: Jean Delvare <khali@linux-fr.org> Cc: Trilok Soni <tsoni@codeaurora.org> Signed-off-by:
-
Daniel Gl?ckner authored
The pca953x driver requires the use of threaded irqs as its irq demultiplexer can sleep. Our irq handler can be called from any context, so use request_any_context_irq to allow threaded irqs as well. Signed-off-by:
Daniel Gl?ckner <dg@emlix.com> Reported-by:
Ian Jeffray <ian@jeffray.co.uk> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Daniel Gl?ckner authored
As sysfs_notify_dirent has been made irq safe, there is no reason to not call it directly from irq. With the work_struct removed, the remaining element in poll_desc is a sysfs_dirent pointer which may not be NULL. We can therefore store it directly in the idr and pass it as context to the irq handler. Most part of the patch deals with renaming defines and variables to reflect their new use without functional change. I also took the opportunity to initialize the idr statically. Signed-off-by:
-
David Brownell authored
Be more consistent about runtime programming interface abuse warnings, which can reduce some confusion and trigger bugfixes. Based on an observation and patch from Jani Nikula. Also update doc to highlight some sleeping-call issues and to match some recent changes. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Cc: Jani Nikula <ext-jani.1.nikula@nokia.com> Cc: "Ryan Mallon" <ryan@bluewatersys.com> Signed-off-by:
-
Dmitry Eremin-Solenikov authored
Provide sane defaults for pcf857x, so the driver can be used w/o providing platform data (and thus can be simply bound via OF tree). Signed-off-by:
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: David Brownell <david-b@pacbell.net> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
-
Marc Kleine-Budde authored
The gpios on the max730x chips have support for internal pullups while in input mode. This patch adds support for configuring these pullups via platform data. A new member ("input_pullup_active") to the platform data struct is introduced. A set bit in this variable activates the pullups while the respective port is in input mode. This is a compatible enhancement since unset bits lead to disables pullups which was the default in the original driver. _Note_: the 4 lowest bits in "input_pullup_active" are unused because the first 4 ports of the controller are not used, too. Signed-off-by:Marc Kleine-Budde <mkl@pengutronix.de> Reviewed-by:
Wolfram Sang <w.sang@pengutronix.de> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Geert Uytterhoeven authored
The Ricoh RP5C01 RTC contains 26 x 4 bits of NVRAM. Provide access to it via a sysfs "nvram" attribute file. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Christian Dietrich authored
Because CONFIG_PM is a precondition to CONFIG_ACPI, the ifdef CONFIG_PM within ifdef CONFIG_ACPI is redundant. Signed-off-by:
Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de> Acked-by:
Wan ZongShun <mcuos.com@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
