Clean up:  When naming fields and data types, follow established
conventions to facilitate accurate grep/cscope searches.

Additionally, for consistency, move the scope field into the NFSv4-
specific part of the nfs_client, and free that memory in the logic
that shuts down NFSv4 nfs_clients.

Introduced by commit 99fe60d0 "nfs41: exchange_id operation", April
1 2009.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

fs/nfs/nfs4state.c does not yet have any dprintk() call sites, and I'm
about to introduce some.  We will need a new flag for enabling them.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

The SETCLIENTID boot verifier is opaque to NFSv4 servers, thus there
is no requirement for byte swapping before the client puts the
verifier on the wire.

This treatment is similar to other timestamp-based verifiers.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

The "struct inode *inode" was only used in a dprintk, so compiling with
CONFIG_SUNRPC_DEBUG off triggers a warning.  To get around this, I
remove the "struct inode *inode" variable and instead change the
dprintk()s to use hdr->inode instead.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

We reset all I/O on a disconnected data server through the pgio layer indicated
by the NFS_IOHDR_REDO flag.

Differentiate between on-the-wire tasks returning with an error which must
call rpc_call_done and tasks woken from the data server slot_table_waitq
waiting for a session slot with a status of zero which call rpc_exit in
rpc_prepare and need to skip rpc_call_done.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

filelayout_scan_commit_lists needs to bump the reference count on
the struct nfs_page just like nfs_scan_commit_list().
Reported-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

The "invalid layout" class of errors is handled by destroying the layout and
getting a new layout from the server.  Currently, the layout must be
destroyed before a new layout can be obtained.

This means that all references (e.g.lsegs) to the "to be destroyed" layout
header must be dropped before it can be destroyed. This in turn means waiting
for all in flight RPC's using the old layout as well as draining the data
server session slot table wait queue.

Set the NFS_LAYOUT_INVALID flag to redirect I/O to the MDS while waiting for
the old layout to be destroyed.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

When the last DS io is processed, the data server client record will be
freed.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Prepare to put a dis-connected DS client record.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Let the MDS know that you are redirecting I/O from pNFS to MDS.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

The DS has a connection error (invalid deviceid). Drain the fore channel
slot table waitq.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Tasks sleeping on the slot table waitq wake to the rpc_prepare_task state.
Reset the task for io through the MDS if the deviceid is invalid.

The reset functions put the io pages through the pageio layer which has the
advantage of re-coalescing which allows for the MDS and DS having different
r/wsizes. Exit the awakened task without executing the rpc_call_done routine.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Replaced by filelayout_reset_write and filelayout_reset_read
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

This prevents the use of any layout for i/o that references the deviceid.
I/O is redirected through the MDS.

Redirect the unhandled failed I/O to the MDS without marking either the
layout or the deviceid invalid.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Set the recovery parameters for data servers.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

RPC_TASK_SOFTCONN returns connection errors to the caller which allows the pNFS
file layout to quickly try the MDS or perhaps another DS.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

The invalid layout bits are should only be used to block LAYOUTGETs.

Do not invalidate a layout on deviceid invalidation.
Do not invalidate a layout on un-handled READ, WRITE, COMMIT errors.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Move the invalid deviceid test into nfs4_fl_prepare_ds, called by the
filelayout read, write, and commit routines. NFS4_DEVICE_ID_NEG_ENTRY
is no longer needed.
Remove redundant printk's - filelayout_mark_devid_invalid prints a KERN_WARNING.

An invalid device prevents pNFS io.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Simplified error gotos to make it slightly easier to read,
it doesn't affect the functionality of the routine.
Signed-off-by: Matthew Treinish <treinish@linux.vnet.ibm.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

xprt_alloc_slot will call rpc_delay() to make the task wait a bit before
retrying when it gets back an -ENOMEM error from xprt_dynamic_alloc_slot.
The problem is that rpc_delay will clear the task->tk_status, causing
call_reserveresult to abort the task.

The solution is simply to let call_reserveresult handle the ENOMEM error
directly.
Reported-by: Jeff Layton <jlayton@redhat.com>
Cc: stable@vger.kernel.org [>= 3.1]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

It's easily possible for these allocations to fail since we're using
GFP_NOWAIT here. We don't want to spam the logs with warnings about
that though.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

fs/nfs/nfs4namespace.c: In function ‘nfs4_create_sec_client’:
fs/nfs/nfs4namespace.c:171:2: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits]

Introduced by commit 72de53ec
"NFS: Do secinfo as part of lookup"
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

We can't create new files or directories here from userspace, so let's
not pretend that this directory is writable.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Fix kernel-doc warnings in sunrpc/rpc_pipe.c and
sunrpc/rpcb_clnt.c:

Warning(net/sunrpc/rpcb_clnt.c:428): No description found for parameter 'net'
Warning(net/sunrpc/rpcb_clnt.c:567): No description found for parameter 'net'

Warning(net/sunrpc/rpc_pipe.c:133): No description found for parameter 'pipe'
Warning(net/sunrpc/rpc_pipe.c:133): Excess function parameter 'inode' description in 'rpc_queue_upcall'
Warning(net/sunrpc/rpc_pipe.c:839): No description found for parameter 'pipe'
Warning(net/sunrpc/rpc_pipe.c:839): Excess function parameter 'ops' description in 'rpc_mkpipe_dentry'
Warning(net/sunrpc/rpc_pipe.c:839): Excess function parameter 'flags' description in 'rpc_mkpipe_dentry'
Warning(net/sunrpc/rpc_pipe.c:949): No description found for parameter 'dentry'
Warning(net/sunrpc/rpc_pipe.c:949): Excess function parameter 'clnt' description in 'rpc_remove_client_dir'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Obviously we should check for NULL here instead of IS_ERR().
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@vger.kernel.org [3.4]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Most users will use NFS v3 or possibly v4 so this makes it easier for
them.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

With this patch NFS v2 can be disabled during Kconfig.  I default the
option to "y" to match the current behavior.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

In theory, NFS v3 can have different error versions than NFS v2. v4 is
already using its own nfs4_stat_to_errno() to map error codes, so
rather than create something in the generic client for v2 and v3 to
share I instead give v3 its own function.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

This allows me to use the filehandle allocated in nfs_fs_mount() for nfs
v4 mounts instead of allocating a new one.  Rather than change
nfs4_mount() to look almost exactly like nfs_fs_mount(), I instead
remove the function.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

This new function chooses between the v2/3 parser and the v4 parser by
filesystem type.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

The v2/3 and v4 cases were very similar, with just a few parameters
changed.  This makes it easy to share code.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

This function returns the same same return type as nfs4_try_mount() so
they two can be more easily substituted.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

This field is unconditionally set while parsing mount data, so there is
no need to fill it in here.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>