- 12 Feb, 2019 40 commits
-
-
Arnaldo Carvalho de Melo authored
[ Upstream commit 0afcf29b ] Reducing this noise when cross building to the Android NDK: util/header.c: In function 'perf_header__fprintf_info': util/header.c:2710:45: warning: pointer targets in passing argument 1 of 'ctime' differ in signedness [-Wpointer-sign] fprintf(fp, "# captured on : %s", ctime(&st.st_ctime)); ^ In file included from util/../perf.h:5:0, from util/evlist.h:11, from util/header.c:22: /opt/android-ndk-r15c/platforms/android-26/arch-arm/usr/include/time.h:81:14: note: expected 'const time_t *' but argument is of type 'long unsigned int *' extern char* ctime(const time_t*) __LIBC_ABI_PUBLIC__; ^ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-6bz74zp080yhmtiwb36enso9@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Bin Liu authored
[ Upstream commit 54578ee8 ] Since the runtime PM support was added in musb, dsps relies on the timer calling otg_timer() to activate the usb subsystem. However the driver doesn't enable the timer for peripheral port, then the peripheral port is unable to be enumerated by a host if the other usb port is disabled or in peripheral mode too. So let's start the timer for peripheral port too. Fixes: ea2f35c0 ("usb: musb: Fix sleeping function called from invalid context for hdrc glue") Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Bin Liu authored
[ Upstream commit 6010abf2 ] Due to lack of ID pin interrupt event on AM335x devices, the musb dsps driver uses polling to detect usb device attach for dual-role port. But in the case if a micro-A cable adapter is attached without a USB device attached to the cable, the musb state machine gets stuck in a_wait_vrise state waiting for the MUSB_CONNECT interrupt which won't happen due to the usb device is not attached. The state is stuck in a_wait_vrise even after the micro-A cable is detached, which could cause VBUS retention if then the dual-role port is attached to a host port. To fix the problem, make a_wait_vrise as a transient state, then move the state to either a_wait_bcon for host port or a_idle state for dual-role port, if no usb device is attached to the port. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Mark Rutland authored
[ Upstream commit 0d640732 ] When we emulate an MMIO instruction, we advance the CPU state within decode_hsr(), before emulating the instruction effects. Having this logic in decode_hsr() is opaque, and advancing the state before emulation is problematic. It gets in the way of applying consistent single-step logic, and it prevents us from being able to fail an MMIO instruction with a synchronous exception. Clean this up by only advancing the CPU state *after* the effects of the instruction are emulated. Cc: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Nicholas Mc Guire authored
[ Upstream commit 5f30b2e8 ] kzalloc() return should always be checked - notably in example code where this may be seen as reference. On failure of allocation in livepatch_fix1_dummy_alloc() respectively dummy_alloc() previous allocation is freed (thanks to Petr Mladek <pmladek@suse.com> for catching this) and NULL returned. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Fixes: 439e7271 ("livepatch: introduce shadow variable API") Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Doug Smythies authored
[ Upstream commit 66354690 ] This script is supposed to be allowed to run with regular user privileges if a previously captured trace is being post processed. Commit fbe31388 (tools/power/x86/intel_pstate_tracer: Free the trace buffer memory) introduced a bug that breaks that option. Commit 35459105 (tools/power/x86/intel_pstate_tracer: Add optional setting of trace buffer memory allocation) moved the code but kept the bug. This patch fixes the issue. Fixes: 35459105 (tools/power/x86/intel_pstate_tracer: Add optional ...) Signed-off-by: Doug Smythies <dsmythies@telus.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Michael Chan authored
[ Upstream commit 36d65be9 ] When bringing up a device, the code checks to see if the number of MSIX has changed. pci_disable_msix() should be called first before changing the number of reserved NQs/CMPL rings. This ensures that the MSIX vectors associated with the NQs/CMPL rings are still properly mapped when pci_disable_msix() masks the vectors. This patch will prevent errors when RDMA support is added for the new 57500 chips. When the RDMA driver shuts down, the number of NQs is decreased and we must use the new sequence to prevent MSIX errors. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Fabrizio Castro authored
[ Upstream commit 51243b73 ] Similarly to R-Car E3, RZ/G2E doesn't come with automatic transmission registers, as such it is not considered compatible with the existing fallback bindings. Add SoC specific binding compatibility to allow for later support for automatic transmission. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Arnaldo Carvalho de Melo authored
[ Upstream commit bef0b897 ] The strncpy() function may leave the destination string buffer unterminated, better use strlcpy() that we have a __weak fallback implementation for systems without it. In this case the 'target' buffer is coming from a list of build-ids that are expected to have a len of at most (SBUILD_ID_SIZE - 1) chars, so probably we're safe, but since we're using strncpy() here, use strlcpy() instead to provide the intended safety checking without the using the problematic strncpy() function. This fixes this warning on an Alpine Linux Edge system with gcc 8.2: util/probe-file.c: In function 'probe_cache__open.isra.5': util/probe-file.c:427:3: error: 'strncpy' specified bound 41 equals destination size [-Werror=stringop-truncation] strncpy(sbuildid, target, SBUILD_ID_SIZE); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: 1f3736c9 ("perf probe: Show all cached probes") Link: https://lkml.kernel.org/n/tip-l7n8ggc9kl38qtdlouke5yp5@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Ethan Lien authored
[ Upstream commit 3cd24c69 ] Snapshot is expected to be fast. But if there are writers steadily creating dirty pages in our subvolume, the snapshot may take a very long time to complete. To fix the problem, we use tagged writepage for snapshot flusher as we do in the generic write_cache_pages(), so we can omit pages dirtied after the snapshot command. This does not change the semantics regarding which data get to the snapshot, if there are pages being dirtied during the snapshotting operation. There's a sync called before snapshot is taken in old/new case, any IO in flight just after that may be in the snapshot but this depends on other system effects that might still sync the IO. We do a simple snapshot speed test on a Intel D-1531 box: fio --ioengine=libaio --iodepth=32 --bs=4k --rw=write --size=64G --direct=0 --thread=1 --numjobs=1 --time_based --runtime=120 --filename=/mnt/sub/testfile --name=job1 --group_reporting & sleep 5; time btrfs sub snap -r /mnt/sub /mnt/snap; killall fio original: 1m58sec patched: 6.54sec This is the best case for this patch since for a sequential write case, we omit nearly all pages dirtied after the snapshot command. For a multi writers, random write test: fio --ioengine=libaio --iodepth=32 --bs=4k --rw=randwrite --size=64G --direct=0 --thread=1 --numjobs=4 --time_based --runtime=120 --filename=/mnt/sub/testfile --name=job1 --group_reporting & sleep 5; time btrfs sub snap -r /mnt/sub /mnt/snap; killall fio original: 15.83sec patched: 10.35sec The improvement is smaller compared to the sequential write case, since we omit only half of the pages dirtied after snapshot command. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Ethan Lien <ethanlien@synology.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Arnaldo Carvalho de Melo authored
[ Upstream commit 75725880 ] The strncpy() function may leave the destination string buffer unterminated, better use strlcpy() that we have a __weak fallback implementation for systems without it. This fixes this warning on an Alpine Linux Edge system with gcc 8.2: util/header.c: In function 'perf_event__synthesize_event_update_unit': util/header.c:3586:2: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation] strncpy(ev->data, evsel->unit, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ util/header.c:3579:16: note: length computed here size_t size = strlen(evsel->unit); ^~~~~~~~~~~~~~~~~~~ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: a6e52817 ("perf tools: Add event_update event unit type") Link: https://lkml.kernel.org/n/tip-fiikh5nay70bv4zskw2aa858@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Arnaldo Carvalho de Melo authored
[ Upstream commit fca5085c ] The strncpy() function may leave the destination string buffer unterminated, better use strlcpy() that we have a __weak fallback implementation for systems without it. This fixes this warning on an Alpine Linux Edge system with gcc 8.2: In function 'decompress_kmodule', inlined from 'dso__decompress_kmodule_fd' at util/dso.c:305:9: util/dso.c:298:3: error: 'strncpy' destination unchanged after copying no bytes [-Werror=stringop-truncation] strncpy(pathname, tmpbuf, len); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CC /tmp/build/perf/util/values.o CC /tmp/build/perf/util/debug.o cc1: all warnings being treated as errors Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: c9a8a613 ("perf tools: Move the temp file processing into decompress_kmodule") Link: https://lkml.kernel.org/n/tip-tl2hdxj64tt4k8btbi6a0ugw@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Adrian Hunter authored
[ Upstream commit 741dad88 ] Fix inconsistent use of tabs and spaces error: # perf test 16 -v 16: Setup struct perf_event_attr : --- start --- test child forked, pid 20224 File "/usr/libexec/perf-core/tests/attr.py", line 119 log.warning("expected %s=%s, got %s" % (t, self[t], other[t])) ^ TabError: inconsistent use of tabs and spaces in indentation test child finished with -1 ---- end ---- Setup struct perf_event_attr: FAILED! Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/20181122140456.16817-1-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Beomho Seo authored
[ Upstream commit 31e93364 ] Commit 391f93f2 ("serial: core: Rework hw-assited flow control support") has changed the way the autoCTS mode is handled. According to that change, serial drivers which enable H/W autoCTS mode must set UPSTAT_AUTOCTS to prevent the serial core from inadvertently disabling TX. This patch adds proper handling of UPSTAT_AUTOCTS flag. Signed-off-by: Beomho Seo <beomho.seo@samsung.com> [mszyprow: rephrased commit message] Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Geert Uytterhoeven authored
[ Upstream commit 71ab1c03 ] On (H)SCIF, sci_submit_rx() is called in the receive interrupt handler. Hence if DMA submission fails, the interrupt handler should resume handling reception using PIO, else no more data is received. Make sci_submit_rx() return an error indicator, so the receive interrupt handler can act appropriately. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Geert Uytterhoeven authored
[ Upstream commit dd1f2250 ] Some callers of sci_submit_rx() hold the port spinlock, others don't. During fallback to PIO, the driver needs to obtain the port spinlock. If the lock was already held, spinlock recursion is detected, causing a deadlock: BUG: spinlock recursion on CPU#0. Fix this by adding a flag parameter to sci_submit_rx() for the caller to indicate the port spinlock is already held, so spinlock recursion can be avoided. Move the spin_lock_irqsave() up, so all DMA disable steps are protected, which is safe as the recently introduced dmaengine_terminate_async() can be called in atomic context. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Anand Jain authored
[ Upstream commit a9261d41 ] It's not that impossible to imagine that a device OR a btrfs image is copied just by using the dd or the cp command. Which in case both the copies of the btrfs will have the same fsid. If on the system with automount enabled, the copied FS gets scanned. We have a known bug in btrfs, that we let the device path be changed after the device has been mounted. So using this loop hole the new copied device would appears as if its mounted immediately after it's been copied. For example: Initially.. /dev/mmcblk0p4 is mounted as / $ lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT mmcblk0 179:0 0 29.2G 0 disk |-mmcblk0p4 179:4 0 4G 0 part / |-mmcblk0p2 179:2 0 500M 0 part /boot |-mmcblk0p3 179:3 0 256M 0 part [SWAP] `-mmcblk0p1 179:1 0 256M 0 part /boot/efi $ btrfs fi show Label: none uuid: 07892354-ddaa-4443-90ea-f76a06accaba Total devices 1 FS bytes used 1.40GiB devid 1 size 4.00GiB used 3.00GiB path /dev/mmcblk0p4 Copy mmcblk0 to sda $ dd if=/dev/mmcblk0 of=/dev/sda And immediately after the copy completes the change in the device superblock is notified which the automount scans using btrfs device scan and the new device sda becomes the mounted root device. $ lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 1 14.9G 0 disk |-sda4 8:4 1 4G 0 part / |-sda2 8:2 1 500M 0 part |-sda3 8:3 1 256M 0 part `-sda1 8:1 1 256M 0 part mmcblk0 179:0 0 29.2G 0 disk |-mmcblk0p4 179:4 0 4G 0 part |-mmcblk0p2 179:2 0 500M 0 part /boot |-mmcblk0p3 179:3 0 256M 0 part [SWAP] `-mmcblk0p1 179:1 0 256M 0 part /boot/efi $ btrfs fi show / Label: none uuid: 07892354-ddaa-4443-90ea-f76a06accaba Total devices 1 FS bytes used 1.40GiB devid 1 size 4.00GiB used 3.00GiB path /dev/sda4 The bug is quite nasty that you can't either unmount /dev/sda4 or /dev/mmcblk0p4. And the problem does not get solved until you take sda out of the system on to another system to change its fsid using the 'btrfstune -u' command. Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Fabrizio Castro authored
[ Upstream commit 1d6e81a2 ] HS-USB found in RZ/G2E (a.k.a. r8a774c0) is very similar to the one found in R-Car E3 (a.k.a. r8a77990), as it needs to release the PLL reset by the UGCTRL register like R-Car E3, therefore add r8a774c0 support in a similar fashion to what was done for the r8a77990. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Linus Walleij authored
[ Upstream commit 0c901c05 ] Modifty the JZ4740 driver to retrieve card detect and write protect GPIO pins from GPIO descriptors instead of hard-coded global numbers. Augment the only board file using this in the process and cut down on passed in platform data. Preserve the code setting the caps2 flags for CD and WP as active low or high since the slot GPIO code currently ignores the gpiolib polarity inversion semantice and uses the raw accessors to read the GPIO lines, but set the right polarity flags in the descriptor table for jz4740. Cc: Paul Cercueil <paul@crapouillou.net> Cc: linux-mips@linux-mips.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Paul Burton <paul.burton@mips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Adrian Hunter authored
[ Upstream commit 0e6e7c2f ] Always check the wait condition before returning timeout. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Zhoujie Wu <zjwu@marvell.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Adrian Hunter authored
[ Upstream commit 9f0ea0bd ] Always check the wait condition before returning timeout. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Adrian Hunter authored
[ Upstream commit ea6d0273 ] Always check the wait condition before returning timeout. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Kai-Heng Feng authored
[ Upstream commit e03e303e ] We can use MEMSTICK_POWER_{ON,OFF} along with pm_runtime_{get,put} helpers to let memstick host support runtime pm. The rpm count may go down to zero before the memstick host powers on, so the host can be runtime suspended. So before doing card detection, increment the rpm count to avoid the host gets runtime suspended. Balance the rpm count after card detection is done. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Nicholas Mc Guire authored
[ Upstream commit b0d06f1c ] devm_kasprintf() may return NULL on failure of internal allocation thus the assignments to init.name are not safe if not checked. On error meson_mx_mmc_register_clks() returns negative values so -ENOMEM in the (unlikely) failure case of devm_kasprintf() should be fine here. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Fixes: ed80a13b ("mmc: meson-mx-sdio: Add a driver for the Amlogic Meson8 and Meson8b SoCs") Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Michal Suchanek authored
[ Upstream commit f6000a4e ] The bcm2835 mmc host tends to lock up for unknown reason so reset it on timeout. The upper mmc block layer tries retransimitting with single blocks which tends to work out after a long wait. This is better than giving up and leaving the machine broken for no obvious reason. Fixes: 660fc733 ("mmc: bcm2835: Add new driver for the sdhost controller.") Signed-off-by: Michal Suchanek <msuchanek@suse.de> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Eric Anholt <eric@anholt.net> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Phil Elwell authored
[ Upstream commit 07d40576 ] If the user issues an "mmc extcsd read", the SD controller receives what it thinks is a SEND_IF_COND command with an unexpected data block. The resulting operations leave the FSM stuck in READWAIT, a state which persists until the MMC framework resets the controller, by which point the root filesystem is likely to have been unmounted. A less heavyweight solution is to detect the condition and nudge the FSM by asserting the (self-clearing) FORCE_DATA_MODE bit. Link: https://github.com/raspberrypi/linux/issues/2728Signed-off-by: Phil Elwell <phil@raspberrypi.org> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Eric Anholt <eric@anholt.net> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Suraj Jitindar Singh authored
[ Upstream commit 693ac10a ] The kvm capability KVM_CAP_SPAPR_TCE_VFIO is used to indicate the availability of in kernel tce acceleration for vfio. However it is currently the case that this is only available on a powernv machine, not for a pseries machine. Thus make this capability dependent on having the cpu feature CPU_FTR_HVMODE. [paulus@ozlabs.org - fixed compilation for Book E.] Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Fabio Estevam authored
[ Upstream commit add68836 ] eukrea-tlv320.c machine driver runs on non-DT platforms and include <asm/mach-types.h> header file in order to be able to use some machine_is_eukrea_xxx() macros. Building it for ARM64 causes the following build error: sound/soc/fsl/eukrea-tlv320.c:28:10: fatal error: asm/mach-types.h: No such file or directory Avoid this error by not allowing to build the SND_SOC_EUKREA_TLV320 driver when ARM64 is selected. This is needed in preparation for the i.MX8M support. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Arnd Bergmann authored
[ Upstream commit 88af3209 ] WARNING: vmlinux.o(.text+0x19f90): Section mismatch in reference from the function littleton_init_lcd() to the function .init.text:pxa_set_fb_info() The function littleton_init_lcd() references the function __init pxa_set_fb_info(). This is often because littleton_init_lcd lacks a __init annotation or the annotation of pxa_set_fb_info is wrong. WARNING: vmlinux.o(.text+0xf824): Section mismatch in reference from the function zeus_register_ohci() to the function .init.text:pxa_set_ohci_info() The function zeus_register_ohci() references the function __init pxa_set_ohci_info(). This is often because zeus_register_ohci lacks a __init annotation or the annotation of pxa_set_ohci_info is wrong. WARNING: vmlinux.o(.text+0xf95c): Section mismatch in reference from the function cm_x300_init_u2d() to the function .init.text:pxa3xx_set_u2d_info() The function cm_x300_init_u2d() references the function __init pxa3xx_set_u2d_info(). This is often because cm_x300_init_u2d lacks a __init annotation or the annotation of pxa3xx_set_u2d_info is wrong. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Stanislav Fomichev authored
[ Upstream commit a0517a0f ] For some reason, my older GCC (< 4.8) isn't smart enough to optimize the !__builtin_constant_p() branch in bpf_htons, I see: error: implicit declaration of function '__builtin_bswap16' Let's use __bpf_constant_htons as suggested by Daniel Borkmann. I tried to use simple htons, but it produces the following: test_progs.c:54:17: error: braced-group within expression allowed only inside a function .eth.h_proto = htons(ETH_P_IP), Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Joey Zhang authored
[ Upstream commit e4a7dca5 ] In the ioctl_event_ctl() SWITCHTEC_IOCTL_EVENT_IDX_ALL case, we call event_ctl() several times with the same "ctl" struct. Each call clobbers ctl.flags, which leads to the problem that we may not actually enable or disable all events as the user requested. Preserve the event flag value with a temporary variable. Fixes: 52eabba5 ("switchtec: Add IOCTLs to the Switchtec driver") Signed-off-by: Joey Zhang <joey.zhang@microchip.com> Signed-off-by: Wesley Sheng <wesley.sheng@microchip.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jan Kara authored
[ Upstream commit d288d958 ] When inode is corrupted so that extent type is invalid, some functions (such as udf_truncate_extents()) will just BUG. Check that extent type is valid when loading the inode to memory. Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Nir Dotan authored
[ Upstream commit d7263ab3 ] In Spectrum-2, higher priority value wins and priority valid values are in the range of {1,cap_kvd_size-1}. mlxsw_sp_acl_tcam_priority_get converts from lower-bound priorities alike tc flower to Spectrum-2 HW range. Up until now tc flower did not provide priority 0 or reached the maximal value, however multicast routing does provide priority 0. Therefore, Change mlxsw_sp_acl_tcam_priority_get to verify priority is in the correct range. Make sure priority is never set to zero and never exceeds the maximal allowed value. Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Icenowy Zheng authored
[ Upstream commit 2659392e ] The new Allwinner H6 SoC's USB2 PHY has two holes -- USB1 (which is a 3.0 port with dedicated PHY) and USB2 (which doesn't exist at all). Add support for this kind of missing USB PHY index. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
[ Upstream commit 4f5c85fe ] It was observed that when using seqentional mode contrary to the documentation, the SS bit (which is supposed to only be set if automatic/sequence command completed normally), is sometimes set together with NA (NAK in address phase) causing transfer to falsely be considered successful. My assumption is that this does not happen during manual mode since the controller is stopping its work the moment it sets NA/ND bit in status register. This is not the case in Automatic/Sequentional mode where it is still working to send STOP condition and the actual status we get depends on the time when the ISR is run. This patch changes the order of checking status bits in ISR - error conditions are checked first and only if none of them occurred, the transfer may be considered successful. This is required to introduce using of sequentional mode in next patch. Signed-off-by: Krzysztof Adamski <krzysztof.adamski@nokia.com> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Hua Su authored
[ Upstream commit fde201a4 ] Protect the list_add on the pblk_line_init_bb() error path in case this code is used for some other purpose in the future. Signed-off-by: Hua Su <suhua.tanke@gmail.com> Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Hans Holmberg authored
[ Upstream commit c12fa401 ] Make sure we only look up valid lba addresses on the resubmission path. If an lba is invalidated in the write buffer, that sector will be submitted to disk (as it is already mapped to a ppa), and that write might fail, resulting in a crash when trying to look up the lba in the mapping table (as the lba is marked as invalid). Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com> Reviewed-by: Javier González <javier@javigon.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Sean Paul authored
[ Upstream commit 5f79e03b ] There exists a case where a flush of a plane/dma may have been triggered & started from an async commit. If that plane/dma is subsequently disabled by the next commit, the flush register will continue to hold the flush bit for the disabled plane. Since the bit remains active, pending_kickoff_cnt will never decrement and we'll miss frame_done events. This patch limits the check of flush_register to include only those bits which have been updated with the latest commit. Changes in v2: - None Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Abhinav Kumar authored
[ Upstream commit c1866d44 ] Fix the dsi clock names in the DSI 10nm PLL driver to match the names in the dispcc driver as those are according to the clock plan of the chipset. Changes in v2: - Update the clock diagram with the new clock name Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Zhizhou Zhang authored
[ Upstream commit b2d102bd ] This bug occurs when: - a new request arrives, one thread(let's call it A) is pending in optee_supp_req() with req->busy is initial value false. - tee-supplicant is killed, then optee_supp_release() is called, this function calls list_del(&req->link), and set supp->ctx to NULL. And it also wake up process A. - process A continues, it firstly checks supp->ctx which is NULL, then checks req->busy which is false, at last run list_del(&req->link). This triggers double list_del() and results kernel panic. For solve this problem, we rename req->busy to req->in_queue, and associate it with state of whether req is linked to supp->reqs. So we can just only check req->in_queue to make decision calling list_del() or not. Signed-off-by: Zhizhou Zhang <zhizhouzhang@asrmicro.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-