It was using a non-existent socket[] index and not doing it for all
sockets.

into home.transmeta.com:/home/torvalds/v2.5/linux

into home.transmeta.com:/home/torvalds/v2.5/linux

Also, default to the 10-byte version of mode sense, since a lot
of modern SCSI-like devices don't even support the old version
(we will automatically downgrade to the 6-byte version if the long
version isn't supported).

in VT_RESIZEX handling.

allocation have only the two standard ports by default.

Which was what MELAN really wanted, and others don't
really care.

Pointed out by Roland Dreier

Yet another Asus motherboard hiding features

We currently mask off offline CPUs in both set_cpus_allowed and
sys_sched_setaffinity.  This is firstly redundant, and secondly
erroneous when more CPUs come online (eg. setting affinity to all 1s
should mean all CPUs, including future ones).

We mask with cpu_online_map() in sys_sched_getaffinity *anyway* (which
is another issue, since this is not valid with changing of online
cpus either), so userspace won't see any difference.

This patch makes set_cpus_allowed() return -errno, and check that in
sys_sched_setaffinity.

Matt Fleming points out that returning int from any_online_cpu
where cpu numbers are passed as unsigned ints elsewhere is awkward
and a little dangerous.

Make any_online_cpu() match find_first_bit(), by returning NR_CPUS
when no cpu is found, rather than -1.  This also simplifies the
future case where NR_CPUS > BITS_PER_LONG.

Make the ROMfs copy in the startup code for Motorola/M5272C3 board
conditional on actually using a ROMfs setup.

Allow for hard setting of boot arguments from configuration for
the Motorola Coldfire 5272 CPU targets.

Make the ROMfs copy in the startup code for Motorola/M5249C3 board
conditional on actually using a ROMfs setup.

Allow for hard setting of boot arguments from configuration for
the Motorola Coldfire 5249 CPU targets.

Remove the empty initializer workaround that was added for egcs 1.1.
Only 2.95+ is supported now, so all compilers should support empty
structures.

The if just checked for __GNUC__, which means that 2.95 got
the workaround (and the incompatibility) too even though it didn't need it.

Advantage is that gcc 2.95 and 3.x compiled kernels are now potentially
binary compatible.  Module loading still checks the compiler version,
but it might be removable.

       CPU time while reading PSX pads, and make it a module parameter also,
       for devices which would need the huge value of 60.

       misbehaving 3DPro joysticks, don't trust FreestylePro
       1-bit data packet for data width recognition, invert
       FreestylePro buttons.

       path in hid-core.c

       so that it is easier to replace a beeper with a different
       driver

       separate source file, always enable Synaptics support. Some more
       fixes in Synaptics code and documentation.

       where ATKBD_CMD_RESET_BAT is used.

ext3 and JBD still have enormous numbers of lines which end in tabs.  Fix
them all up.

From: "Stephen C. Tweedie" <sct@redhat.com>

ext3 has long had a problem wherein it will unnecessarily write to a
read-only filesystem during the mount process.  It does this in preparing the
journal superblock's sequence numbers.

But if the filesystem was shut down cleanly we do not need to do this.
Detect the situation and avoid modifying and writing out the journal
superblock.

From: Daniel Phillips <phillips@arcor.de>

This patch restores my copyright notice for the HTree directory index,
inadvertently omitted during the conversion from Ext2 to Ext3.

From: David Mosberger <davidm@napali.hpl.hp.com>

highmem.h uses stuff like page_address(), but fails to include
<linux/mm.h>.

From: William Lee Irwin III <wli@holomorphy.com>

The following patch implements node-local memory allocation support for
hugetlb. Successfully tested on NUMA-Q.

From: Jakub Jelinek <jakub@redhat.com>

Any prelinked shared library is impossible to run on ppc64 without this
patch, as they immediately segfault.  Say:

	/bin/echo

works even if /lib64/ld64.so.1 is prelinked while

	/lib64/ld64.so.1 /bin/echo

segfaults.

The problem is that ELF_PLAT_INIT is passed the virtual address of the
shared library, not the difference between the virtual address of the
shared library and p_vaddr of the first PT_LOAD segment in that library
(while for the interpreter interp_load_address is the bias).

ELF_PLAT_INIT sets gpr[2] to this absolute address, but
arch/ppc64/kernel/process.c (start_thread) assumes it is a bias and adds it
to entry and toc values loaded from the entry point descriptor.

For non-prelinked shared libraries, first PT_LOAD segment's p_vaddr is
typically 0 and thus load_addr == load_bias (which is why this bug has not
been discovered that long).

From: Pavel Machek <pavel@ucw.cz>

This fixes suspend with NFS mounts active.

enable_apic_mode needs tobe hooked up.  (It came in with the es7000 merge)

From: Rusty Russell <rusty@rustcorp.com.au>

Milton Miller <miltonm@bga.com> and Junfeng Yang <yjf@stanford.edu> point
out that we hand a kernel address to sys_wait4 for the status pointer.
This is true, but since we don't have a SIGCHLD handler, it never gets that
far.  Use NULL, and document the fact.

From: "Martin J. Bligh" <mbligh@aracnet.com> and me

proc_pid_lookup() does a put_task_struct() and then continues to play with
the task.