Skip to content

L
linux
Switch branch/tag
  1. 02 Sep, 2010 5 commits
  3. 01 Sep, 2010 9 commits
  5. 31 Aug, 2010 5 commits
    • Luis R. Rodriguez's avatar
      ath9k_hw: fix parsing of HT40 5 GHz CTLs · 90487974
      Luis R. Rodriguez authored 
      The 5 GHz CTL indexes were not being read for all hardware
devices due to the masking out through the CTL_MODE_M mask
being one bit too short. Without this the calibrated regulatory
maximum values were not being picked up when devices operate
on 5 GHz in HT40 mode. The final output power used for Atheros
devices is the minimum between the calibrated CTL values and
what CRDA provides.

Cc: stable@kernel.org [2.6.27+]
Signed-off-by: default avatarLuis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      90487974
    • Luis R. Rodriguez's avatar
      ath9k_hw: Fix EEPROM uncompress block reading on AR9003 · 803288e6
      Luis R. Rodriguez authored 
      The EEPROM is compressed on AR9003, upon decompression
the wrong upper limit was being used for the block which
prevented the 5 GHz CTL indexes from being used, which are
stored towards the end of the EEPROM block. This fix allows
the actual intended regulatory limits to be used on AR9003
hardware.

Cc: stable@kernel.org [2.6.36+]
Signed-off-by: default avatarLuis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      803288e6
    • John W. Linville's avatar
      wireless: register wiphy rfkill w/o holding cfg80211_mutex · c3d34d5d
      John W. Linville authored 
      Otherwise lockdep complains...

https://bugzilla.kernel.org/show_bug.cgi?id=17311

[ INFO: possible circular locking dependency detected ]
2.6.36-rc2-git4 #12
-------------------------------------------------------
kworker/0:3/3630 is trying to acquire lock:
 (rtnl_mutex){+.+.+.}, at: [<ffffffff813396c7>] rtnl_lock+0x12/0x14

but task is already holding lock:
 (rfkill_global_mutex){+.+.+.}, at: [<ffffffffa014b129>]
rfkill_switch_all+0x24/0x49 [rfkill]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #2 (rfkill_global_mutex){+.+.+.}:
       [<ffffffff81079ad7>] lock_acquire+0x120/0x15b
       [<ffffffff813ae869>] __mutex_lock_common+0x54/0x52e
       [<ffffffff813aede9>] mutex_lock_nested+0x34/0x39
       [<ffffffffa014b4ab>] rfkill_register+0x2b/0x29c [rfkill]
       [<ffffffffa0185ba0>] wiphy_register+0x1ae/0x270 [cfg80211]
       [<ffffffffa0206f01>] ieee80211_register_hw+0x1b4/0x3cf [mac80211]
       [<ffffffffa0292e98>] iwl_ucode_callback+0x9e9/0xae3 [iwlagn]
       [<ffffffff812d3e9d>] request_firmware_work_func+0x54/0x6f
       [<ffffffff81065d15>] kthread+0x8c/0x94
       [<ffffffff8100ac24>] kernel_thread_helper+0x4/0x10

-> #1 (cfg80211_mutex){+.+.+.}:
       [<ffffffff81079ad7>] lock_acquire+0x120/0x15b
       [<ffffffff813ae869>] __mutex_lock_common+0x54/0x52e
       [<ffffffff813aede9>] mutex_lock_nested+0x34/0x39
       [<ffffffffa018605e>] cfg80211_get_dev_from_ifindex+0x1b/0x7c [cfg80211]
       [<ffffffffa0189f36>] cfg80211_wext_giwscan+0x58/0x990 [cfg80211]
       [<ffffffff8139a3ce>] ioctl_standard_iw_point+0x1a8/0x272
       [<ffffffff8139a529>] ioctl_standard_call+0x91/0xa7
       [<ffffffff8139a687>] T.723+0xbd/0x12c
       [<ffffffff8139a727>] wext_handle_ioctl+0x31/0x6d
       [<ffffffff8133014e>] dev_ioctl+0x63d/0x67a
       [<ffffffff8131afd9>] sock_ioctl+0x48/0x21d
       [<ffffffff81102abd>] do_vfs_ioctl+0x4ba/0x509
       [<ffffffff81102b5d>] sys_ioctl+0x51/0x74
       [<ffffffff81009e02>] system_call_fastpath+0x16/0x1b

-> #0 (rtnl_mutex){+.+.+.}:
       [<ffffffff810796b0>] __lock_acquire+0xa93/0xd9a
       [<ffffffff81079ad7>] lock_acquire+0x120/0x15b
       [<ffffffff813ae869>] __mutex_lock_common+0x54/0x52e
       [<ffffffff813aede9>] mutex_lock_nested+0x34/0x39
       [<ffffffff813396c7>] rtnl_lock+0x12/0x14
       [<ffffffffa0185cb5>] cfg80211_rfkill_set_block+0x1a/0x7b [cfg80211]
       [<ffffffffa014aed0>] rfkill_set_block+0x80/0xd5 [rfkill]
       [<ffffffffa014b07e>] __rfkill_switch_all+0x3f/0x6f [rfkill]
       [<ffffffffa014b13d>] rfkill_switch_all+0x38/0x49 [rfkill]
       [<ffffffffa014b821>] rfkill_op_handler+0x105/0x136 [rfkill]
       [<ffffffff81060708>] process_one_work+0x248/0x403
       [<ffffffff81062620>] worker_thread+0x139/0x214
       [<ffffffff81065d15>] kthread+0x8c/0x94
       [<ffffffff8100ac24>] kernel_thread_helper+0x4/0x10
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
Acked-by: default avatarJohannes Berg <johannes@sipsolutions.net>
      c3d34d5d
    • David S. Miller's avatar
      netlink: Make NETLINK_USERSOCK work again. · b963ea89
      David S. Miller authored 
      Once we started enforcing the a nl_table[] entry exist for
a protocol, NETLINK_USERSOCK stopped working.  Add a dummy
table entry so that it works again.
Reported-by: default avatarThomas Voegtle <tv@lio96.de>
Tested-by: default avatarThomas Voegtle <tv@lio96.de>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b963ea89
    • David S. Miller's avatar
      irda: Correctly clean up self->ias_obj on irda_bind() failure. · 628e300c
      David S. Miller authored 
      If irda_open_tsap() fails, the irda_bind() code tries to destroy
the ->ias_obj object by hand, but does so wrongly.

In particular, it fails to a) release the hashbin attached to the
object and b) reset the self->ias_obj pointer to NULL.

Fix both problems by using irias_delete_object() and explicitly
setting self->ias_obj to NULL, just as irda_release() does.
Reported-by: default avatarTavis Ormandy <taviso@cmpxchg8b.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      628e300c
  7. 30 Aug, 2010 5 commits
  9. 28 Aug, 2010 2 commits
  11. 27 Aug, 2010 1 commit
  13. 26 Aug, 2010 6 commits
  15. 25 Aug, 2010 1 commit
  17. 24 Aug, 2010 6 commits
    • Dan Carpenter's avatar
      pxa168_eth: silence gcc warnings · b2bc8563
      Dan Carpenter authored 
      Casting "pep->tx_desc_dma" to to a struct tx_desc pointer makes gcc
complain:

drivers/net/pxa168_eth.c:657: warning:
	cast to pointer from integer of different size
Signed-off-by: default avatarDan Carpenter <error27@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b2bc8563
    • Dan Carpenter's avatar
      pxa168_eth: update call to phy_mii_ioctl() · 4f2c8510
      Dan Carpenter authored 
      The phy_mii_ioctl() function changed recently.  It now takes a struct
ifreq pointer directly.
Signed-off-by: default avatarDan Carpenter <error27@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4f2c8510
    • Dan Carpenter's avatar
      pxa168_eth: fix error handling in prope · 945c7c73
      Dan Carpenter authored 
      A couple issues here:
* Some resources weren't released.
* If alloc_etherdev() failed it would have caused a NULL dereference
  because "pep" would be null when we checked "if (pep->clk)".
* Also it's better to propagate the error codes from mdiobus_register()
  instead of just returning -ENOMEM.
Signed-off-by: default avatarDan Carpenter <error27@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      945c7c73
    • Dan Carpenter's avatar
      pxa168_eth: remove unneeded null check · 4169591f
      Dan Carpenter authored 
      "pep->pd" isn't checked consistently in this function.  For example it's
dereferenced unconditionally on the next line after the end of the if
condition.  This function is only called from pxa168_eth_probe() and
pep->pd is always non-NULL so I removed the check.
Signed-off-by: default avatarDan Carpenter <error27@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4169591f
    • Anton Vorontsov's avatar
      phylib: Fix race between returning phydev and calling adjust_link · ef24b16b
      Anton Vorontsov authored 
      It is possible that phylib will call adjust_link before returning
from {,of_}phy_connect(), which may cause the following [very rare,
though] oops upon reopening the device:

  Unable to handle kernel paging request for data at address 0x0000024c
  Oops: Kernel access of bad area, sig: 11 [#1]
  PREEMPT SMP NR_CPUS=2 LTT NESTING LEVEL : 0
  P1021 RDB
  Modules linked in:
  NIP: c0345dac LR: c0345dac CTR: c0345d84
  TASK = dffab6b0[30] 'events/0' THREAD: c0d24000 CPU: 0
  [...]
  NIP [c0345dac] adjust_link+0x28/0x19c
  LR [c0345dac] adjust_link+0x28/0x19c
  Call Trace:
  [c0d25f00] [000045e1] 0x45e1 (unreliable)
  [c0d25f30] [c036c158] phy_state_machine+0x3ac/0x554
  [...]

Here is why. Drivers store phydev in their private structures, e.g.
gianfar driver:

static int init_phy(struct net_device *dev)
{
	...
	priv->phydev = of_phy_connect(...);
	...
}

So that adjust_link could retrieve it back:

static void adjust_link(struct net_device *dev)
{
	...
	struct phy_device *phydev = priv->phydev;
	...
}

If the device has been opened before, then phydev->state is set to
PHY_HALTED (or undefined if the driver didn't call phy_stop()).

Now, phy_connect starts the PHY state machine before returning phydev to
the driver:

	phy_start_machine(phydev, NULL);

	if (phydev->irq > 0)
		phy_start_interrupts(phydev);

	return phydev;

The time between 'phy_start_machine()' and 'return phydev' is undefined.
The start machine routine delays execution for 1 second, which is enough
for most cases. But under heavy load, or if you're unlucky, it is quite
possible that PHY state machine will execute before phy_connect()
returns, and so adjust_link callback will try to dereference phydev,
which is not yet ready.

To fix the issue, simply initialize the PHY's state to PHY_READY during
phy_attach(). This will ensure that phylib won't call adjust_link before
phy_start().
Signed-off-by: default avatarAnton Vorontsov <avorontsov@mvista.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ef24b16b
    • Heiko Carstens's avatar
      caif-driver: add HAS_DMA dependency · 9dc002d8
      Heiko Carstens authored 
      Fix this error on an s390 allyesconfig build:

linux-2.6/drivers/net/caif/caif_spi.c:98:
    undefined reference to `dma_free_coherent'

Cc: Sjur Braendeland <sjur.brandeland@stericsson.com>
Signed-off-by: default avatarHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9dc002d8
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7