Pull xfs updates from Darrick Wong:
 "There's a lot going on this cycle with cleanups in the log code, the
  btree code, and the xattr code.

  We're tightening of metadata validation and online fsck checking, and
  introducing a common btree rebuilding library so that we can refactor
  xfs_repair and introduce online repair in a future cycle.

  We also fixed a few visible bugs -- most notably there's one in
  getdents that we introduced in 5.6; and a fix for hangs when disabling
  quotas.

  This series has been running fstests & other QA in the background for
  over a week and looks good so far.

  I anticipate sending a second pull request next week. That batch will
  change how xfs interacts with memory reclaim; how the log batches and
  throttles log items; how hard writes near ENOSPC will try to squeeze
  more space out of the filesystem; and hopefully fix the last of the
  umount hangs after a catastrophic failure. That should ease a lot of
  problems when running at the limits, but for now I'm leaving that in
  for-next for another week to make sure we got all the subtleties
  right.

  Summary:

   - Fix a hard to trigger race between iclog error checking and log
     shutdown.

   - Strengthen the AGF verifier.

   - Ratelimit some of the more spammy error messages.

   - Remove the icdinode uid/gid members and just use the ones in the
     vfs inode.

   - Hold ILOCK across insert/collapse range.

   - Clean up the extended attribute interfaces.

   - Clean up the attr flags mess.

   - Restore PF_MEMALLOC after exiting xfsaild thread to avoid
     triggering warnings in the process accounting code.

   - Remove the flexibly-sized array from struct xfs_agfl to eliminate
     compiler warnings about unaligned pointers and packed structures.

   - Various macro and typedef removals.

   - Stale metadata buffers if we decide they're corrupt outside of a
     verifier.

   - Check directory data/block/free block owners.

   - Fix a UAF when aborting inactivation of a corrupt xattr fork.

   - Teach online scrub to report failed directory and attr name lookups
     as a metadata corruption instead of a runtime error.

   - Avoid potential buffer overflows in sysfs files by using scnprintf.

   - Fix a regression in getdents lookups due to a mistake in pointer
     arithmetic.

   - Refactor btree cursor private data structures to use anonymous
     unions.

   - Cleanups in the log unmounting code.

   - Fix a potential mishandling of ENOMEM errors on multi-block
     directory buffer lookups.

   - Fix an incorrect test in the block allocation code.

   - Cleanups and name prefix shortening in the scrub code.

   - Introduce btree bulk loading code for online repair and scrub.

   - Fix a quotaoff log item leak (and hang) when the fs goes down
     midway through a quotaoff operation.

   - Remove di_version from the incore inode.

   - Refactor some of the log shutdown checking code.

   - Record the forcing of the log unmount records in the log force
     counters.

   - Fix a longstanding bug where quotacheck would purge the
     administrator's default quota grace interval and warning limits.

   - Reduce memory usage when scrubbing directory and xattr trees.

   - Don't let fsfreeze race with GETFSMAP or online scrub.

   - Handle bio_add_page failures more gracefully in xlog_write_iclog"

* tag 'xfs-5.7-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (108 commits)
  xfs: prohibit fs freezing when using empty transactions
  xfs: shutdown on failure to add page to log bio
  xfs: directory bestfree check should release buffers
  xfs: drop all altpath buffers at the end of the sibling check
  xfs: preserve default grace interval during quotacheck
  xfs: remove xlog_state_want_sync
  xfs: move the ioerror check out of xlog_state_clean_iclog
  xfs: refactor xlog_state_clean_iclog
  xfs: remove the aborted parameter to xlog_state_done_syncing
  xfs: simplify log shutdown checking in xfs_log_release_iclog
  xfs: simplify the xfs_log_release_iclog calling convention
  xfs: factor out a xlog_wait_on_iclog helper
  xfs: merge xlog_cil_push into xlog_cil_push_work
  xfs: remove the di_version field from struct icdinode
  xfs: simplify a check in xfs_ioctl_setattr_check_cowextsize
  xfs: simplify di_flags2 inheritance in xfs_ialloc
  xfs: only check the superblock version for dinode size calculation
  xfs: add a new xfs_sb_version_has_v3inode helper
  xfs: fix unmount hang and memory leak on shutdown during quotaoff
  xfs: factor out quotaoff intent AIL removal and memory free
  ...

Pull hibernation fix from Darrick Wong:
 "Fix a regression where we broke the userspace hibernation driver by
  disallowing writes to the swap device"

* tag 'vfs-5.7-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  hibernate: Allow uswsusp to write to swap

Pull iomap updates from Darrick Wong:
 "We're fixing tracepoints and comments in this cycle, so there
  shouldn't be any surprises here.

  I anticipate sending a second pull request next week with a single bug
  fix for readahead, but it's still undergoing QA.

  Summary:

   - Fix a broken tracepoint

   - Fix a broken comment"

* tag 'iomap-5.7-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: fix comments in iomap_dio_rw
  iomap: Remove pgoff from tracepoints

Pull vfs pathwalk sanitizing from Al Viro:
 "Massive pathwalk rewrite and cleanups.

  Several iterations have been posted; hopefully this thing is getting
  readable and understandable now. Pretty much all parts of pathname
  resolutions are affected...

  The branch is identical to what has sat in -next, except for commit
  message in "lift all calls of step_into() out of follow_dotdot/
  follow_dotdot_rcu", crediting Qian Cai for reporting the bug; only
  commit message changed there."

* 'work.dotdot1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (69 commits)
  lookup_open(): don't bother with fallbacks to lookup+create
  atomic_open(): no need to pass struct open_flags anymore
  open_last_lookups(): move complete_walk() into do_open()
  open_last_lookups(): lift O_EXCL|O_CREAT handling into do_open()
  open_last_lookups(): don't abuse complete_walk() when all we want is unlazy
  open_last_lookups(): consolidate fsnotify_create() calls
  take post-lookup part of do_last() out of loop
  link_path_walk(): sample parent's i_uid and i_mode for the last component
  __nd_alloc_stack(): make it return bool
  reserve_stack(): switch to __nd_alloc_stack()
  pick_link(): take reserving space on stack into a new helper
  pick_link(): more straightforward handling of allocation failures
  fold path_to_nameidata() into its only remaining caller
  pick_link(): pass it struct path already with normal refcounting rules
  fs/namei.c: kill follow_mount()
  non-RCU analogue of the previous commit
  helper for mount rootwards traversal
  follow_dotdot(): be lazy about changing nd->path
  follow_dotdot_rcu(): be lazy about changing nd->path
  follow_dotdot{,_rcu}(): massage loops
  ...

Pull exec/proc updates from Eric Biederman:
 "This contains two significant pieces of work: the work to sort out
  proc_flush_task, and the work to solve a deadlock between strace and
  exec.

  Fixing proc_flush_task so that it no longer requires a persistent
  mount makes improvements to proc possible. The removal of the
  persistent mount solves an old regression that that caused the hidepid
  mount option to only work on remount not on mount. The regression was
  found and reported by the Android folks. This further allows Alexey
  Gladkov's work making proc mount options specific to an individual
  mount of proc to move forward.

  The work on exec starts solving a long standing issue with exec that
  it takes mutexes of blocking userspace applications, which makes exec
  extremely deadlock prone. For the moment this adds a second mutex with
  a narrower scope that handles all of the easy cases. Which makes the
  tricky cases easy to spot. With a little luck the code to solve those
  deadlocks will be ready by next merge window"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (25 commits)
  signal: Extend exec_id to 64bits
  pidfd: Use new infrastructure to fix deadlocks in execve
  perf: Use new infrastructure to fix deadlocks in execve
  proc: io_accounting: Use new infrastructure to fix deadlocks in execve
  proc: Use new infrastructure to fix deadlocks in execve
  kernel/kcmp.c: Use new infrastructure to fix deadlocks in execve
  kernel: doc: remove outdated comment cred.c
  mm: docs: Fix a comment in process_vm_rw_core
  selftests/ptrace: add test cases for dead-locks
  exec: Fix a deadlock in strace
  exec: Add exec_update_mutex to replace cred_guard_mutex
  exec: Move exec_mmap right after de_thread in flush_old_exec
  exec: Move cleanup of posix timers on exec out of de_thread
  exec: Factor unshare_sighand out of de_thread and call it separately
  exec: Only compute current once in flush_old_exec
  pid: Improve the comment about waiting in zap_pid_ns_processes
  proc: Remove the now unnecessary internal mount of proc
  uml: Create a private mount of proc for mconsole
  uml: Don't consult current to find the proc_mnt in mconsole_proc
  proc: Use a list of inodes to flush from proc
  ...

We fall back to lookup+create (instead of atomic_open) in several cases:
	1) we don't have write access to filesystem and O_TRUNC is
present in the flags.  It's not something we want ->atomic_open() to
see - it just might go ahead and truncate the file.  However, we can
pass it the flags sans O_TRUNC - eventually do_open() will call
handle_truncate() anyway.
	2) we have O_CREAT | O_EXCL and we can't write to parent.
That's going to be an error, of course, but we want to know _which_
error should that be - might be EEXIST (if file exists), might be
EACCES or EROFS.  Simply stripping O_CREAT (and checking if we see
ENOENT) would suffice, if not for O_EXCL.  However, we used to have
->atomic_open() fully responsible for rejecting O_CREAT | O_EXCL
on existing file and just stripping O_CREAT would've disarmed
those checks.  With nothing downstream to catch the problem -
FMODE_OPENED used to be "don't bother with EEXIST checks,
->atomic_open() has done those".  Now EEXIST checks downstream
are skipped only if FMODE_CREATED is set - FMODE_OPENED alone
is not enough.  That has eliminated the need to fall back onto
lookup+create path in this case.
	3) O_WRONLY or O_RDWR when we have no write access to
filesystem, with nothing else objectionable.  Fallback is
(and had always been) pointless.

IOW, we don't really need that fallback; all we need in such
cases is to trim O_TRUNC and O_CREAT properly.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

argument had been unused since 1643b43f (lookup_open(): lift the
"fallback to !O_CREAT" logics from atomic_open()) back in 2016
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Currently path_openat() has "EEXIST on O_EXCL|O_CREAT" checks done on one
of the ways out of open_last_lookups().  There are 4 cases:
	1) the last component is . or ..; check is not done.
	2) we had FMODE_OPENED or FMODE_CREATED set while in lookup_open();
check is not done.
	3) symlink to be traversed is found; check is not done (nor
should it be)
	4) everything else: check done (before complete_walk(), even).

In case (1) O_EXCL|O_CREAT ends up failing with -EISDIR - that's
	open("/tmp/.", O_CREAT|O_EXCL, 0600)
Note that in the same conditions
	open("/tmp", O_CREAT|O_EXCL, 0600)
would have yielded EEXIST.  Either error is allowed, switching to -EEXIST
in these cases would've been more consistent.

Case (2) is more subtle; first of all, if we have FMODE_CREATED set, the
object hadn't existed prior to the call.  The check should not be done in
such a case.  The rest is problematic, though - we have
	FMODE_OPENED set (i.e. it went through ->atomic_open() and got
successfully opened there)
	FMODE_CREATED is *NOT* set
	O_CREAT and O_EXCL are both set.
Any such case is a bug - either we failed to set FMODE_CREATED when we
had, in fact, created an object (no such instances in the tree) or
we have opened a pre-existing file despite having had both O_CREAT and
O_EXCL passed.  One of those was, in fact caught (and fixed) while
sorting out this mess (gfs2 on cold dcache).  And in such situations
we should fail with EEXIST.

Note that for (1) and (4) FMODE_CREATED is not set - for (1) there's nothing
in handle_dots() to set it, for (4) we'd explicitly checked that.

And (1), (2) and (4) are exactly the cases when we leave the loop in
the caller, with do_open() called immediately after that loop.  IOW, we
can move the check over there, and make it

	If we have O_CREAT|O_EXCL and after successful pathname resolution
FMODE_CREATED is *not* set, we must have run into a preexisting file and
should fail with EEXIST.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

now we can have open_last_lookups() directly from the loop in
path_openat() - the rest of do_last() never returns a symlink
to follow, so we can bloody well leave the loop first.

Rename the rest of that thing from do_last() to do_open() and
make it return an int.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

... and adjust the caller (reserve_stack()).  Rename to nd_alloc_stack(),
while we are at it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

expand the call of nd_alloc_stack() into it (and don't
recheck the depth on the second call)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

pick_link() needs to push onto stack; we start with using two-element
array embedded into struct nameidata and the first time we need
more than that we switch to separately allocated array.

Allocation can fail, of course, and handling of that would be simple
enough - we need to drop 'link' and bugger off.  However, the things
get more complicated in RCU mode.  There we must do GFP_ATOMIC
allocation.  If that fails, we try to switch to non-RCU mode and
repeat the allocation.

To switch to non-RCU mode we need to grab references to 'link' and
to everything in nameidata.  The latter done by unlazy_walk();
the former - legitimize_path().  'link' must go first - after
unlazy_walk() we are out of RCU-critical period and it's too
late to call legitimize_path() since the references in link->mnt
and link->dentry might be pointing to freed and reused memory.

So we do legitimize_path(), then unlazy_walk().  And that's where
it gets too subtle: what to do if the former fails?  We MUST
do path_put(link) to avoid leaks.  And we can't do that under
rcu_read_lock().  Solution in mainline was to empty then nameidata
manually, drop out of RCU mode and then do put_path().

In effect, we open-code the things eventual terminate_walk()
would've done on error in RCU mode.  That looks badly out of place
and confusing.  We could add a comment along the lines of the
explanation above, but... there's a simpler solution.  Call
unlazy_walk() even if legitimaze_path() fails.  It will take
us out of RCU mode, so we'll be able to do path_put(link).

Yes, it will do unnecessary work - attempt to grab references
on the stuff in nameidata, only to have them dropped as soon
as we return the error to upper layer and get terminate_walk()
called there.  So what?  We are thoroughly off the fast path
by that point - we had GFP_ATOMIC allocation fail, we had
->d_seq or mount_lock mismatch and we are about to try walking
the same path from scratch in non-RCU mode.  Which will need
to do the same allocation, this time with GFP_KERNEL, so it will
be able to apply memory pressure for blocking stuff.

Compared to that the cost of several lockref_get_not_dead()
is noise.  And the logics become much easier to understand
that way.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

step_into() tries to avoid grabbing and dropping mount references
on the steps that do not involve crossing mountpoints (which is
obviously the majority of cases).  So it uses a local struct path
with unusual refcounting rules - path.mnt is pinned if and only if
it's not equal to nd->path.mnt.

We used to have similar beasts all over the place and we had quite
a few bugs crop up in their handling - it's easy to get confused
when changing e.g. cleanup on failure exits (or adding a new check,
etc.)

Now that's mostly gone - the step_into() instance (which is what
we need them for) is the only one left.  It is exposed to mount
traversal and it's (shortly) seen by pick_link().  Since pick_link()
needs to store it in link stack, where the normal rules apply,
it has to make sure that mount is pinned regardless of nd->path.mnt
value.  That's done on all calls of pick_link() and very early
in those.  Let's do that in the caller (step_into()) instead -
that way the fewer places need to be aware of such struct path
instances.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

The only remaining caller (path_pts()) should be using follow_down()
anyway.  And clean path_pts() a bit.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

new helper: choose_mountpoint().  Wrapper around choose_mountpoint_rcu(),
similar to lookup_mnt() vs. __lookup_mnt().  follow_dotdot() switched to
it.  Now we don't grab mount_lock exclusive anymore; note that the
primitive used non-RCU mount traversals in other direction (lookup_mnt())
doesn't bother with that either - it uses mount_lock seqcount instead.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

The loops in follow_dotdot{_rcu()} are doing the same thing:
we have a mount and we want to find out how far up the chain
of mounts do we need to go.

We follow the chain of mount until we find one that is not
directly overmounting the root of another mount.  If such
a mount is found, we want the location it's mounted upon.
If we run out of chain (i.e. get to a mount that is not
mounted on anything else) or run into process' root, we
report failure.

On success, we want (in RCU case) d_seq of resulting location
sampled or (in non-RCU case) references to that location
acquired.

This commit introduces such primitive for RCU case and
switches follow_dotdot_rcu() to it; non-RCU case will be
go in the next commit.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Change nd->path only after the loop is done and only in case we hadn't
ended up finding ourselves in root.  Same for NO_XDEV check.

That separates the "check how far back do we need to go through the
mount stack" logics from the rest of .. traversal.

NOTE: path_get/path_put introduced here are temporary.  They will
go away later in the series.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Change nd->path only after the loop is done and only in case we hadn't
ended up finding ourselves in root.  Same for NO_XDEV check.  Don't
recheck mount_lock on each step either.

That separates the "check how far back do we need to go through the
mount stack" logics from the rest of .. traversal.

Note that the sequence for d_seq/d_inode here is
	* sample mount_lock seqcount
...
	* sample d_seq
	* fetch d_inode
	* verify mount_lock seqcount
The last step makes sure that d_inode value we'd got matches d_seq -
it dentry is guaranteed to have been a mountpoint through the
entire thing, so its d_inode must have been stable.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

The logics in both of them is the same:
	while true
		if in process' root	// uncommon
			break
		if *not* in mount root	// normal case
			find the parent
			return
		if at absolute root	// very uncommon
			break
		move to underlying mountpoint
	report that we are in root

Pull the common path out of the loop:
	if in process' root		// uncommon
		goto in_root
	if unlikely(in mount root)
		while true
			if at absolute root
				goto in_root
			move to underlying mountpoint
			if in process' root
				goto in_root
			if in mount root
				break;
	find the parent	// we are not in mount root
	return
in_root:
	report that we are in root

The reason for that transformation is that we get to keep the
common path straight *and* get a separate block for "move
through underlying mountpoints", which will allow to sanitize
NO_XDEV handling there.  What's more, the pared-down loops
will be easier to deal with - in particular, non-RCU case
has no need to grab mount_lock and rewriting it to the
form that wouldn't do that is a non-trivial change.  Better
do that with less stuff getting in the way...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

lift step_into() into handle_dots() (where they merge with each other);
have follow_... return dentry and pass inode/seq to the caller.

[braino fix folded; kudos to Qian Cai <cai@lca.pw> for reporting it]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull rdma updates from Jason Gunthorpe:
 "The majority of the patches are cleanups, refactorings and clarity
  improvements.

  This cycle saw some more activity from Syzkaller, I think we are now
  clean on all but one of those bugs, including the long standing and
  obnoxious rdma_cm locking design defect. Continue to see many drivers
  getting cleanups, with a few new user visible features.

  Summary:

   - Various driver updates for siw, bnxt_re, rxe, efa, mlx5, hfi1

   - Lots of cleanup patches for hns

   - Convert more places to use refcount

   - Aggressively lock the RDMA CM code that syzkaller says isn't
     working

   - Work to clarify ib_cm

   - Use the new ib_device lifecycle model in bnxt_re

   - Fix mlx5's MR cache which seems to be failing more often with the
     new ODP code

   - mlx5 'dynamic uar' and 'tx steering' user interfaces"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (144 commits)
  RDMA/bnxt_re: make bnxt_re_ib_init static
  IB/qib: Delete struct qib_ivdev.qp_rnd
  RDMA/hns: Fix uninitialized variable bug
  RDMA/hns: Modify the mask of QP number for CQE of hip08
  RDMA/hns: Reduce the maximum number of extend SGE per WQE
  RDMA/hns: Reduce PFC frames in congestion scenarios
  RDMA/mlx5: Add support for RDMA TX flow table
  net/mlx5: Add support for RDMA TX steering
  IB/hfi1: Call kobject_put() when kobject_init_and_add() fails
  IB/hfi1: Fix memory leaks in sysfs registration and unregistration
  IB/mlx5: Move to fully dynamic UAR mode once user space supports it
  IB/mlx5: Limit the scope of struct mlx5_bfreg_info to mlx5_ib
  IB/mlx5: Extend QP creation to get uar page index from user space
  IB/mlx5: Extend CQ creation to get uar page index from user space
  IB/mlx5: Expose UAR object and its alloc/destroy commands
  IB/hfi1: Get rid of a warning
  RDMA/hns: Remove redundant judgment of qp_type
  RDMA/hns: Remove redundant assignment of wc->smac when polling cq
  RDMA/hns: Remove redundant qpc setup operations
  RDMA/hns: Remove meaningless prints
  ...

Pull hmm updates from Jason Gunthorpe:
 "This series focuses on corner case bug fixes and general clarity
  improvements to hmm_range_fault(). It arose from a review of
  hmm_range_fault() by Christoph, Ralph and myself.

  hmm_range_fault() is being used by these 'SVM' style drivers to
  non-destructively read the page tables. It is very similar to
  get_user_pages() except that the output is an array of PFNs and
  per-pfn flags, and it has various modes of reading.

  This is necessary before RDMA ODP can be converted, as we don't want
  to have weird corner case regressions, which is still a looking
  forward item. Ralph has a nice tester for this routine, but it is
  waiting for feedback from the selftests maintainers.

  Summary:

   - 9 bug fixes

   - Allow pgmap to track the 'owner' of a DEVICE_PRIVATE - in this case
     the owner tells the driver if it can understand the DEVICE_PRIVATE
     page or not. Use this to resolve a bug in nouveau where it could
     touch DEVICE_PRIVATE pages from other drivers.

   - Remove a bunch of dead, redundant or unused code and flags

   - Clarity improvements to hmm_range_fault()"

* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (25 commits)
  mm/hmm: return error for non-vma snapshots
  mm/hmm: do not set pfns when returning an error code
  mm/hmm: do not unconditionally set pfns when returning EBUSY
  mm/hmm: use device_private_entry_to_pfn()
  mm/hmm: remove HMM_FAULT_SNAPSHOT
  mm/hmm: remove unused code and tidy comments
  mm/hmm: return the fault type from hmm_pte_need_fault()
  mm/hmm: remove pgmap checking for devmap pages
  mm/hmm: check the device private page owner in hmm_range_fault()
  mm: simplify device private page handling in hmm_range_fault
  mm: handle multiple owners of device private pages in migrate_vma
  memremap: add an owner field to struct dev_pagemap
  mm: merge hmm_vma_do_fault into into hmm_vma_walk_hole_
  mm/hmm: don't handle the non-fault case in hmm_vma_walk_hole_()
  mm/hmm: simplify hmm_vma_walk_hugetlb_entry()
  mm/hmm: remove the unused HMM_FAULT_ALLOW_RETRY flag
  mm/hmm: don't provide a stub for hmm_range_fault()
  mm/hmm: do not check pmd_protnone twice in hmm_vma_handle_pmd()
  mm/hmm: add missing call to hmm_pte_need_fault in HMM_PFN_SPECIAL handling
  mm/hmm: return -EFAULT when setting HMM_PFN_ERROR on requested valid pages
  ...

Pull XArray updates from Matthew Wilcox:

 - Fix two bugs which affected multi-index entries larger than 2^26
   indices

 - Fix some documentation

 - Remove unused IDA macros

 - Add a small optimisation for tiny configurations

 - Fix a bug which could cause an RCU walker to terminate a marked walk
   early

* tag 'xarray-5.7' of git://git.infradead.org/users/willy/linux-dax:
  xarray: Fix early termination of xas_for_each_marked
  radix tree test suite: Support kmem_cache alignment
  XArray: Optimise xas_sibling() if !CONFIG_XARRAY_MULTI
  ida: remove abandoned macros
  XArray: Fix incorrect comment in header file
  XArray: Fix xas_pause for large multi-index entries
  XArray: Fix xa_find_next for large multi-index entries

Merge tag 'linux-kselftest-kunit-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kunit updates from Shuah Khan:
 "This kunit update consists of:

   - debugfs support for displaying kunit test suite results.

     This is especially useful for module-loaded tests to allow
     disentangling of test result display from other dmesg events.
     CONFIG_KUNIT_DEBUGFS enables/disables the debugfs support.

   - Several fixes and improvements to kunit framework and tool"

* tag 'linux-kselftest-kunit-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: tool: add missing test data file content
  kunit: update documentation to describe debugfs representation
  kunit: subtests should be indented 4 spaces according to TAP
  kunit: add log test
  kunit: add debugfs /sys/kernel/debug/kunit/<suite>/results display
  Documentation: kunit: Make the KUnit documentation less UML-specific
  Fix linked-list KUnit test when run multiple times
  kunit: kunit_tool: Allow .kunitconfig to disable config items
  kunit: Always print actual pointer values in asserts
  kunit: add --make_options
  kunit: Run all KUnit tests through allyesconfig
  kunit: kunit_parser: make parser more robust

Merge tag 'linux-kselftest-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest update from Shuah Khan:
 "This kselftest update consists of:

   - resctrl_tests for resctrl file system. resctrl isn't included in
     the default TARGETS list in kselftest Makefile. It can be run
     manually.

   - Kselftest harness improvements.

   - Kselftest framework and individual test fixes to support runs on
     Kernel CI rings and other environments that use relocatable build
     and install features.

   - Minor cleanups and typo fixes"

* tag 'linux-kselftest-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (25 commits)
  selftests: enforce local header dependency in lib.mk
  selftests: Fix memfd to support relocatable build (O=objdir)
  selftests: Fix seccomp to support relocatable build (O=objdir)
  selftests/harness: Handle timeouts cleanly
  selftests/harness: Move test child waiting logic
  selftests: android: Fix custom install from skipping test progs
  selftests: android: ion: Fix ionmap_test compile error
  selftests: Fix kselftest O=objdir build from cluttering top level objdir
  selftests/seccomp: Adjust test fixture counts
  selftests/ftrace: Fix typo in trigger-multihist.tc
  selftests/timens: Remove duplicated include <time.h>
  selftests/resctrl: fix spelling mistake "Errror" -> "Error"
  selftests/resctrl: Add the test in MAINTAINERS
  selftests/resctrl: Disable MBA and MBM tests for AMD
  selftests/resctrl: Use cache index3 id for AMD schemata masks
  selftests/resctrl: Add vendor detection mechanism
  selftests/resctrl: Add Cache Allocation Technology (CAT) selftest
  selftests/resctrl: Add Cache QoS Monitoring (CQM) selftest
  selftests/resctrl: Add MBA test
  selftests/resctrl: Add MBM test
  ...

Merge tag 'for-5.7/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - Add DM writecache "cleaner" policy feature that allows cache to be
   flushed while userspace monitors for completion to then discommision
   use of caching.

 - Optimize DM writecache superblock writing and also yield CPU while
   initializing writecache on large PMEM devices to avoid CPU stalls.

 - Various fixes to DM integrity target while preparing for the ability
   to resize a DM integrity device. In addition to resize support, add
   optional discard support with the "allow_discards" feature.

 - Fix DM clone target's discard handling and overflow bugs which could
   cause data corruption.

 - Fix memory leak in destructor for DM verity FEC support.

 - Fix DM zoned target's redundant increment of nr_rnd_zones.

 - Small cleanup in DM crypt to use crypt_integrity_aead() helper.

* tag 'for-5.7/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm clone metadata: Fix return type of dm_clone_nr_of_hydrated_regions()
  dm clone: Add missing casts to prevent overflows and data corruption
  dm clone: Add overflow check for number of regions
  dm clone: Fix handling of partial region discards
  dm writecache: add cond_resched to avoid CPU hangs
  dm integrity: improve discard in journal mode
  dm integrity: add optional discard support
  dm integrity: allow resize of the integrity device
  dm integrity: factor out get_provided_data_sectors()
  dm integrity: don't replay journal data past the end of the device
  dm integrity: remove sector type casts
  dm integrity: fix a crash with unusually large tag size
  dm zoned: remove duplicate nr_rnd_zones increase in dmz_init_zone()
  dm verity fec: fix memory leak in verity_fec_dtr
  dm writecache: optimize superblock write
  dm writecache: implement gradual cleanup
  dm writecache: implement the "cleaner" policy
  dm writecache: do direct write if the cache is full
  dm integrity: print device name in integrity_metadata() error message
  dm crypt: use crypt_integrity_aead() helper

Pull drm updates from Dave Airlie:
 "This is the main drm pull request for 5.7-rc1.

  Highlights:

   - i915 enables Tigerlake by default

   - i915 and amdgpu have initial OLED backlight support

     [ Jani Nikula pipes up and points out that we've had a bunch of
       "initial support" code for a long time already, but only now
       Lyude made it actually work on real world machines ]

   - vmwgfx add support to enable OpenGL 4 userspace

   - zero length arrays are mostly removed.

  Detailed summary:

  new driver:
   - tidss: TI Keystone platform display subsystem

  core:
   - new drm device warn macros
   - mode config valid for memory constrained devices
   - bridge bus format negotation
   - consolidated fake vblank event handling
   - dma_alloc related cleanups
   - drop get_crtc callback
   - dp: DP1.4 EDID corruption test
   - EDID CEA detailed timings improvements
   - relicense some code to dual GPL2/MIT
   - convert core vblank support to per-crtc support
   - rework drm_global_mutex
   - bridge rework to allow omap_dss custom driver removeal
   - remove drm_fb_helper connector interrfaces
   - zero-length array removal

  scheduler:
   - support for modifying the sched list
   - revert job distribution optimization
   - helper to pick least loaded scheduler
   - race condition fix

  mst:
   - various fixes
   - remove register_connector callback

  i915:
   - uapi to allows userspace specific CS ring buffer sizes
   - Tigerlake enablement patches + Tigerlake enabled by default
   - new sysfs entries for engine properties
   - display/logging refactors
   - eDP/DP fixes for DPCD
   - Gen7 back to aliasing-ppgtt
   - Gen8+ irq refactor
   - Avoid globals
   - GEM locking fixes and simplifications
   - Ice Lake and Elkhart Lake fixes and workarounds
   - Baytrail/Haswell instability fix
   - GVT - VFIO edid better support

  amdgpu:
   - Rework VM update handling in preparation for HMM support
   - drm load/unload removal fixups
   - USB-C PD firmware updates
   - HDCP srm support
   - Navi/renoir PM watermark fixes
   - OLED panel support
   - Optimize debugging vram access
   - Use BACO for runtime pm
   - DC clock programming optimizations and fixes
   - PSP fw loading sequence updates
   - Drop DRIVER_USE_AGP
   - Remove legacy drm load and unload callbacks
   - ACP Kconfig fix
   - Lots of fixes across the driver

  amdkfd:
   - runtime pm support
   - more gfx config details in amdgpu

  radeon:
   - drop DRIVER_USE_AGP

  vmwgfx:
   - Disable DMA when SEV encryption in use
   - Shader Model 5 support - needed for GL4 support

  msm:
   - DPU resource manager refactor
   - dpu using atomic global state

  mediatek:
   - MT8183 DPI support

  etnaviv:
   - out-of-bounds read fix
   - expose feature flags for GC400 STM32MP1 SoC
   - runtime suspend entry fix
   - dma32 zone fix

  hisilicon:
   - mode selection fixes

  meson:
   - YUV420 support

  lima:
   - add support for heap buffers

  tinydrm:
   - removal of owner field
   - explicit DT dependency removal
   - YAML schema conversion

  tegra:
   - misc cleanups

  tidss:
   - new driver

  virtio:
   - better batching of notifications to host
   - memory handling reworked
   - shmem + gpu context fixes

  hibmc:
   - add gamma_set support
   - improve DPMS support

  pl111:
   - Integrator IM-PD1 support

  sun4i:
   - LVDS support for A20 + A33
   - DSI panel handling improvements"

* tag 'drm-next-2020-04-01' of git://anongit.freedesktop.org/drm/drm: (1537 commits)
  drm/i915/display: Fix mode private_flags comparison at atomic_check
  drm/i915/gt: Stage the transfer of the virtual breadcrumb
  drm/i915/gt: Select the deepest available parking mode for rc6
  drm/i915: Avoid live-lock with i915_vma_parked()
  drm/i915/gt: Treat idling as a RPS downclock event
  drm/i915/gt: Cancel a hung context if already closed
  drm/i915: Use explicit flag to mark unreachable intel_context
  drm/amdgpu: don't try to reserve training bo for sriov (v2)
  drm/amdgpu/smu11: add support for SMU AC/DC interrupts
  drm/amdgpu/swSMU: handle manual AC/DC notifications
  drm/amdgpu/swSMU: handle DC controlled by GPIO for navi1x
  drm/amdgpu/swSMU: set AC/DC mode based on the current system state (v2)
  drm/amdgpu/swSMU: correct the bootup power source for Navi1X (v2)
  drm/amdgpu/swSMU: use the smu11 power source helper for navi1x
  drm/amdgpu/smu11: add a helper to set the power source
  drm/amd/swSMU: add callback to set AC/DC power source (v2)
  drm/scheduler: fix rare NULL ptr race
  drm/amdgpu: fix the coverage issue to clear ArcVPGRs
  drm/amd/display: Fix pageflip event race condition for DCN.
  drm/[radeon|amdgpu]: Remove HAINAN board from max_sclk override check
  ...

Pull mailbox updates from Jassi Brar:

 - imx: add support for i.MX8/8X to existing driver

 - mediatek: drop the atomix execution feature, add flush

 - allwinner: new 'msgbox' controller driver

 - armada: misc: drop redundant error print

 - bcm: misc: catch error in probe and snprintf buffer overflow

* tag 'mailbox-v5.7' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: imx: add SCU MU support
  mailbox: imx: restructure code to make easy for new MU
  dt-bindings: mailbox: imx-mu: add SCU MU support
  mailbox: mediatek: remove implementation related to atomic_exec
  mailbox: mediatek: implement flush function
  dt-binding: gce: remove atomic_exec in mboxes property
  maillbox: bcm-flexrm-mailbox: handle cmpl_pool dma allocation failure
  mailbox: sun6i-msgbox: Add a new mailbox driver
  dt-bindings: mailbox: Add a binding for the sun6i msgbox
  mailbox: bcm-pdc: Use scnprintf() for avoiding potential buffer overflow
  mailbox:armada-37xx-rwtm:remove duplicate print in armada_37xx_mbox_probe()

Pull HID updates from Jiri Kosina:

 - Logitech HID++ protocol support improvement from Filipe Laíns

 - probe fix for Logitech-G* devices from Hans de Goede

 - a few other small code cleanups and support for new device IDs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: rmi: Simplify an error handling path in 'rmi_hid_read_block()'
  HID: intel-ish-hid: hbm.h: Replace zero-length array with flexible-array member
  HID: intel-ish-hid: ishtp-dev.h: Replace zero-length array with flexible-array member
  HID: Add driver fixing Glorious PC Gaming Race mouse report descriptor
  HID: lg-g15: Do not fail the probe when we fail to disable F# emulation
  HID: appleir: Use devm_kzalloc() instead of kzalloc()
  HID: appleir: Remove unnecessary goto label
  HID: logitech-dj: add support for the static device in the Powerplay mat/receiver
  HID: mcp2221: add usb to i2c-smbus host bridge
  HID: logitech-dj: add debug msg when exporting a HID++ report descriptors
  HID: quirks: Remove ITE 8595 entry from hid_have_special_driver

Pull trivial tree updates from Jiri Kosina:
 "My attempt to revitalize trivial queue I've been neglecting for years
  (what a disaster that was for this world, right? :) ) with patches
  collected from backlog that were still relevant and not applied
  elsewhere in the meantime"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  err.h: remove deprecated PTR_RET for good
  blk-mq: Fix typo in comment
  x86/boot: Fix comment spelling
  sh: mach-highlander: Fix comment spelling
  s390/dasd: Fix comment spelling
  mfd: wm8994: Fix comment spelling
  docs: Add reference in binfmt-misc.rst
  genirq: fix kerneldoc comment for irq_desc
  drm/amdgpu: fix two documentation mismatch issues
  HID: fix Kconfig word ordering
  list/hashtable: minor documentation corrections.

Pull crypto updates from Herbert Xu:
 "API:
   - Fix out-of-sync IVs in self-test for IPsec AEAD algorithms

  Algorithms:
   - Use formally verified implementation of x86/curve25519

  Drivers:
   - Enhance hwrng support in caam

   - Use crypto_engine for skcipher/aead/rsa/hash in caam

   - Add Xilinx AES driver

   - Add uacce driver

   - Register zip engine to uacce in hisilicon

   - Add support for OCTEON TX CPT engine in marvell"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits)
  crypto: af_alg - bool type cosmetics
  crypto: arm[64]/poly1305 - add artifact to .gitignore files
  crypto: caam - limit single JD RNG output to maximum of 16 bytes
  crypto: caam - enable prediction resistance in HRWNG
  bus: fsl-mc: add api to retrieve mc version
  crypto: caam - invalidate entropy register during RNG initialization
  crypto: caam - check if RNG job failed
  crypto: caam - simplify RNG implementation
  crypto: caam - drop global context pointer and init_done
  crypto: caam - use struct hwrng's .init for initialization
  crypto: caam - allocate RNG instantiation descriptor with GFP_DMA
  crypto: ccree - remove duplicated include from cc_aead.c
  crypto: chelsio - remove set but not used variable 'adap'
  crypto: marvell - enable OcteonTX cpt options for build
  crypto: marvell - add the Virtual Function driver for CPT
  crypto: marvell - add support for OCTEON TX CPT engine
  crypto: marvell - create common Kconfig and Makefile for Marvell
  crypto: arm/neon - memzero_explicit aes-cbc key
  crypto: bcm - Use scnprintf() for avoiding potential buffer overflow
  crypto: atmel-i2c - Fix wakeup fail
  ...

This is partly for readability - using named arguments instead of
numbered ones makes it muchmore obvious just what is going on.  Using
"%[efault]" instead of "%4" for the special -EFAULT constant just means
that you don't have to count the arguments to see what's up.

But the motivation for all this cleanup is that when we'll start to
conditionally use "asm goto" even for the __get_user_asm() case, the
argument numbers will depend on whether we have an error output, or an
error label we can just directly jump to.

So this moves us towards named arguments for the same reason that we
have to use named arguments for the asms that use SET_CC(): numbering
will eventually become similarly unreliable and depends on whether we
can use particular compiler features or not.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is the exact same thing as 36807856 ("x86: get rid of 'rtype'
argument to __put_user_goto() macro") except it's about __get_user_asm()
rather than __put_user_goto().

The reasons are the same: having the low-level asm access the argument
with a different size than the compiler thinks it does is fundamentally
wrong.

But unlike the __put_user_goto() case, we actually did tell the compiler
that we used a bigger variable (either long or long long), and then only
filled in the low bits, and ended up "fixing" this by casting the result
to the proper pointer type.

That's because we needed to use a non-qualified type (the user pointer
might be a const pointer!), and that makes this a bit more painful.  Our
'__inttype()' macro used to be lazy and only differentiate between "fits
in a register" or "needs two registers".

So this fix had to also make that '__inttype()' macro more precise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The 'rtype' argument goes back to pre-git (and pre-BK) times, and comes
from the fact that we used to not necessarily have the same type sizes
for the arguments of the inline asm as we did for the actual accesses we
did.

So 'rtype' is the 'register type' - the override of the register size in
the inline asm when it doesn't match the actual size of the variable we
use as the output argument (for when you used "put_user()" on an "int"
value that was assigned to a byte-sized user space access etc).

That mismatch doesn't actually exist any more, and should probably never
have existed in the first place.  It's a horrid bug just waiting to
happen (using more - or less - of the variable that the compiler
expected us to use).

I think we had some odd casting going on to hide the effects of that
oddity after-the-fact, but those are long gone, and these days we should
always have the right size value in the first place, using things like

        __typeof__(*(ptr)) __pu_val = (x);

and gcc should thus have the right register size without any manual
'rtype' games.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>