- 14 Apr, 2013 40 commits
-
-
Randy Dunlap authored
Fix randconfig error when USB is not enabled: ERROR: "usb_control_msg" [drivers/media/common/cypress_firmware.ko] undefined! Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reviewed-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Antti Palosaari authored
It is moved to the different location and renamed. Signed-off-by:
-
Hans Verkuil authored
Use the monotonic clock and set the timestamp_type that vb2 expects. Signed-off-by:
-
Hans Verkuil authored
A mutex_unlock was missing in the 'success' path of the open() call, and also at one error path in the same function. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Both MythTV and gstreamer expect that they can set/get/query/enumerate the standards, even if the input is the component input for which standards really do not apply. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
This is the latest firmware version and - it seems - the most reliable. Signed-off-by:
-
Hans Verkuil authored
Video nodes can be used at once after registration, so make sure the full initialization is done before registering them. Signed-off-by:
-
Hans Verkuil authored
- return EBUSY instead of EAGAIN. - add missing break. - remove unnecessary buf type check (done by the core). Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
This prepares the driver for priority and control event handling. This patch also checks for correct streaming ownership and it makes a small improvement to the encoder_cmd ioctls: always zero 'flags' and drop the memset of 'raw' as that is already done by the v4l2 core. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
These formats are supported by the HDPVR, but they were missing in the list. Note that these formats are different from the common PAL/NTSC/SECAM formats since all color channels are transmitted separately and so there is no PAL or NTSC or SECAM color encoding involved. Signed-off-by:
-
Hans Verkuil authored
This was set to 1 << 0 which is the same as V4L2_DV_FL_REDUCED_BLANKING. It should be 1 << 3 instead. Luckily interlaced formats are rarely used, which is why this bug wasn't seen until now. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
Eduardo Valentin <edubezval@gmail.com> Tested-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
- check for invalid modulators. - clamp frequency to valid range. Signed-off-by:
-
Hans Verkuil authored
Simplify locking by using the V4L2 core lock mechanism. This allows us to remove all locking from the i2c module. This will also simplify the upcoming conversion to the control framework. Signed-off-by:
-
Hans Verkuil authored
Set bus_info and fill in device_caps. Signed-off-by:
-
Hans Verkuil authored
Also set the v4l2_dev pointer in struct video_device as this was missing. Signed-off-by:
-
Hans Verkuil authored
The audout ioctls are not appropriate for radio transmitters, they apply to video output devices only. Remove them from this driver. Signed-off-by:
-
Hans Verkuil authored
dvb->adapter.priv should also be set to the i2c bus since that's what em28xx_tuner_callback expects. Signed-off-by:
Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by:
-
Hans Verkuil authored
Increase the size of the 'reserved' array to give more room for future extensions. Signed-off-by:
-
Hans Verkuil authored
This ioctl will be extended to return more information than just the name. Signed-off-by:
-
Hans Verkuil authored
That way drivers do not need to fill in the name themselves for bridge address 0. Signed-off-by:
-
Hans Verkuil authored
After using the new VIDIOC_DBG_G_CHIP_NAME ioctl I realized that the matching by name possibility is useless. Just drop it and rename MATCH_SUBDEV_IDX to just MATCH_SUBDEV. The v4l2-dbg utility is much better placed to match by name by just enumerating all bridge and subdev devices until chip_name.name matches. Signed-off-by:
-
Hans Verkuil authored
Only enable this ioctl if the VIDEO_ADV_DEBUG config option is set. This prevents abuse from both userspace and kernelspace (some bridge drivers abuse DBG_G_CHIP_IDENT, lets prevent that from happening again with this ioctl). Signed-off-by:
-
Hans Verkuil authored
The get_rf_strength op in tuner-simple is valid only for the radio mode. But due to the way get_signal in analog_demod_ops was designed it would overwrite the signal value with a bogus value when in TV mode. Pass a pointer to the signal value instead, and when not in radio mode leave it alone in the tuner-simple. This broke in commit 030755bd (tuner-core: call has_signal for both TV and radio) in kernel 3.6. Before that this was working correctly. That commit did the right thing, but what wasn't realized at the time was that tuner-simple should have been updated as well to restrict setting the signal strength to the radio mode only. Signed-off-by:
-
Hans Verkuil authored
The get_afc op in tda9887 is valid only for the radio mode. But due to the way get_afc in analog_demod_ops was designed it would overwrite the afc value with a bogus value when in TV mode. Pass a pointer to the afc value instead, and when not in radio mode leave it alone in the tda9887. This broke a long time ago in 2.6.19 when the get_afc op was introduced. Before that the afc was only set for radio mode in the tda9887. Signed-off-by:
-
Ondrej Zary authored
Make saa7134 driver more V4L2 compliant: clear reserved space of VBI structure to make sure no garbage is left there Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Signed-off-by:
-
Ondrej Zary authored
Make saa7134 driver more V4L2 compliant: remove empty g_parm function Signed-off-by:
-
Ondrej Zary authored
Make saa7134 driver more V4L2 compliant: remove empty g_audio and s_audio functions and don't set audioset in enum_input Signed-off-by:
-
Ondrej Zary authored
Make saa7134 driver more V4L2 compliant: return real frequency range in g_tuner and fail in s_tuner for non-zero tuner Signed-off-by:
-
Ondrej Zary authored
Make saa7134 driver more V4L2 compliant: don't cache frequency in s_frequency/g_frequency but return real one instead Signed-off-by:
-
Ondrej Zary authored
Make saa7134 driver more V4L2 compliant: remove broken priority handling and use v4l2_fh instead Signed-off-by:
-
Ondrej Zary authored
Make saa7134 driver more V4L2 compliant: filter audio modes that came from tuner - keep only MONO/STEREO in radio mode Signed-off-by:
-
Ondrej Zary authored
Make saa7134 driver more V4L2 compliant: implement V4L2_CAP_DEVICE_CAPS support and fix all capabilities problems reported by v4l2-compliance. Signed-off-by:
-
