- 19 Sep, 2012 2 commits
-
-
Stuart Hodgson authored
Add PTP IEEE-1588 support and make accesible via the PHC subsystem. This work is based on prior code by Andrew Jackson Signed-off-by: Stuart Hodgson <smhodgson@solarflare.com> [bwh: - Add byte order conversion in efx_ptp_send_times() - Simplify conversion of PPS event times - Add the built-in vs module check to CONFIG_SFC_PTP dependencies] Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
-
Ben Hutchings authored
The maximum array sizes have been calculated on the basis of a maximum SDU size of 255 bytes, whereas the actual maximum is 252 bytes. Constructing a larger SDU will result in a BUG_ON in efx_mcdi_copyin. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
-
- 07 Sep, 2012 4 commits
-
-
Stuart Hodgson authored
For NIC/System time synchonisation efx_mcdi_rpc needs to be split in efx_mcdi_rpc_start and efx_mcdi_rpc_finish operations. Signed-off-by: Stuart Hodgson <smhodgson@solarflare.com> Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
-
Stuart Hodgson authored
Allows an extra channel to override the standard receive_skb handler and also for extra non generic operations to be performed on remove. Also set default rx strategy so only skbs can be delivered to the PTP receive function. Signed-off-by: Stuart Hodgson <smhodgson@solarflare.com> Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
-
Stuart Hodgson authored
The PTP channel will have its own RX queue even though it's not a regular traffic channel. Original work by Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Stuart Hodgson <smhodgson@solarflare.com> Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
-
Ben Hutchings authored
Initial version by Stuart Hodgson <smhodgson@solarflare.com> Some PHC device drivers may deliver PPS events with a significant and variable delay, but still be able to measure precisely what that delay is. Add a pps_sub_ts() function for subtracting a delay from the timestamp(s) in a PPS event, and a PTP event type (PTP_CLOCK_PPSUSR) for which the caller provides a complete PPS event. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
-
- 05 Sep, 2012 14 commits
-
-
Nicolas Dichtel authored
When adding a blackhole or a prohibit route, they were handling like classic routes. Moreover, it was only possible to add this kind of routes by specifying an interface. Bug already reported here: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=498498 Before the patch: $ ip route add blackhole 2001::1/128 RTNETLINK answers: No such device $ ip route add blackhole 2001::1/128 dev eth0 $ ip -6 route | grep 2001 2001::1 dev eth0 metric 1024 After: $ ip route add blackhole 2001::1/128 $ ip -6 route | grep 2001 blackhole 2001::1 dev lo metric 1024 error -22 v2: wrong patch v3: add a field fc_type in struct fib6_config to store RTN_* type Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sathya Perla authored
This patch allows code to handle the PCIe AER capability. The PCI callbacks for error handling/reset/recovery already exist in be2net and have been tested with EEH/ppc. This patch has been tested using the aer-inject tool. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
It seems we need to provide ability for stacked devices to use specific lock_class_key for sch->busylock We could instead default l2tpeth tx_queue_len to 0 (no qdisc), but a user might use a qdisc anyway. (So same fixes are probably needed on non LLTX stacked drivers) Noticed while stressing L2TPV3 setup : ====================================================== [ INFO: possible circular locking dependency detected ] 3.6.0-rc3+ #788 Not tainted ------------------------------------------------------- netperf/4660 is trying to acquire lock: (l2tpsock){+.-...}, at: [<ffffffffa0208db2>] l2tp_xmit_skb+0x172/0xa50 [l2tp_core] but task is already holding lock: (&(&sch->busylock)->rlock){+.-...}, at: [<ffffffff81596595>] dev_queue_xmit+0xd75/0xe00 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&(&sch->busylock)->rlock){+.-...}: [<ffffffff810a5df0>] lock_acquire+0x90/0x200 [<ffffffff817499fc>] _raw_spin_lock_irqsave+0x4c/0x60 [<ffffffff81074872>] __wake_up+0x32/0x70 [<ffffffff8136d39e>] tty_wakeup+0x3e/0x80 [<ffffffff81378fb3>] pty_write+0x73/0x80 [<ffffffff8136cb4c>] tty_put_char+0x3c/0x40 [<ffffffff813722b2>] process_echoes+0x142/0x330 [<ffffffff813742ab>] n_tty_receive_buf+0x8fb/0x1230 [<ffffffff813777b2>] flush_to_ldisc+0x142/0x1c0 [<ffffffff81062818>] process_one_work+0x198/0x760 [<ffffffff81063236>] worker_thread+0x186/0x4b0 [<ffffffff810694d3>] kthread+0x93/0xa0 [<ffffffff81753e24>] kernel_thread_helper+0x4/0x10 -> #0 (l2tpsock){+.-...}: [<ffffffff810a5288>] __lock_acquire+0x1628/0x1b10 [<ffffffff810a5df0>] lock_acquire+0x90/0x200 [<ffffffff817498c1>] _raw_spin_lock+0x41/0x50 [<ffffffffa0208db2>] l2tp_xmit_skb+0x172/0xa50 [l2tp_core] [<ffffffffa021a802>] l2tp_eth_dev_xmit+0x32/0x60 [l2tp_eth] [<ffffffff815952b2>] dev_hard_start_xmit+0x502/0xa70 [<ffffffff815b63ce>] sch_direct_xmit+0xfe/0x290 [<ffffffff81595a05>] dev_queue_xmit+0x1e5/0xe00 [<ffffffff815d9d60>] ip_finish_output+0x3d0/0x890 [<ffffffff815db019>] ip_output+0x59/0xf0 [<ffffffff815da36d>] ip_local_out+0x2d/0xa0 [<ffffffff815da5a3>] ip_queue_xmit+0x1c3/0x680 [<ffffffff815f4192>] tcp_transmit_skb+0x402/0xa60 [<ffffffff815f4a94>] tcp_write_xmit+0x1f4/0xa30 [<ffffffff815f5300>] tcp_push_one+0x30/0x40 [<ffffffff815e6672>] tcp_sendmsg+0xe82/0x1040 [<ffffffff81614495>] inet_sendmsg+0x125/0x230 [<ffffffff81576cdc>] sock_sendmsg+0xdc/0xf0 [<ffffffff81579ece>] sys_sendto+0xfe/0x130 [<ffffffff81752c92>] system_call_fastpath+0x16/0x1b Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&(&sch->busylock)->rlock); lock(l2tpsock); lock(&(&sch->busylock)->rlock); lock(l2tpsock); *** DEADLOCK *** 5 locks held by netperf/4660: #0: (sk_lock-AF_INET){+.+.+.}, at: [<ffffffff815e581c>] tcp_sendmsg+0x2c/0x1040 #1: (rcu_read_lock){.+.+..}, at: [<ffffffff815da3e0>] ip_queue_xmit+0x0/0x680 #2: (rcu_read_lock_bh){.+....}, at: [<ffffffff815d9ac5>] ip_finish_output+0x135/0x890 #3: (rcu_read_lock_bh){.+....}, at: [<ffffffff81595820>] dev_queue_xmit+0x0/0xe00 #4: (&(&sch->busylock)->rlock){+.-...}, at: [<ffffffff81596595>] dev_queue_xmit+0xd75/0xe00 stack backtrace: Pid: 4660, comm: netperf Not tainted 3.6.0-rc3+ #788 Call Trace: [<ffffffff8173dbf8>] print_circular_bug+0x1fb/0x20c [<ffffffff810a5288>] __lock_acquire+0x1628/0x1b10 [<ffffffff810a334b>] ? check_usage+0x9b/0x4d0 [<ffffffff810a3f44>] ? __lock_acquire+0x2e4/0x1b10 [<ffffffff810a5df0>] lock_acquire+0x90/0x200 [<ffffffffa0208db2>] ? l2tp_xmit_skb+0x172/0xa50 [l2tp_core] [<ffffffff817498c1>] _raw_spin_lock+0x41/0x50 [<ffffffffa0208db2>] ? l2tp_xmit_skb+0x172/0xa50 [l2tp_core] [<ffffffffa0208db2>] l2tp_xmit_skb+0x172/0xa50 [l2tp_core] [<ffffffffa021a802>] l2tp_eth_dev_xmit+0x32/0x60 [l2tp_eth] [<ffffffff815952b2>] dev_hard_start_xmit+0x502/0xa70 [<ffffffff81594e0e>] ? dev_hard_start_xmit+0x5e/0xa70 [<ffffffff81595961>] ? dev_queue_xmit+0x141/0xe00 [<ffffffff815b63ce>] sch_direct_xmit+0xfe/0x290 [<ffffffff81595a05>] dev_queue_xmit+0x1e5/0xe00 [<ffffffff81595820>] ? dev_hard_start_xmit+0xa70/0xa70 [<ffffffff815d9d60>] ip_finish_output+0x3d0/0x890 [<ffffffff815d9ac5>] ? ip_finish_output+0x135/0x890 [<ffffffff815db019>] ip_output+0x59/0xf0 [<ffffffff815da36d>] ip_local_out+0x2d/0xa0 [<ffffffff815da5a3>] ip_queue_xmit+0x1c3/0x680 [<ffffffff815da3e0>] ? ip_local_out+0xa0/0xa0 [<ffffffff815f4192>] tcp_transmit_skb+0x402/0xa60 [<ffffffff815fa25e>] ? tcp_md5_do_lookup+0x18e/0x1a0 [<ffffffff815f4a94>] tcp_write_xmit+0x1f4/0xa30 [<ffffffff815f5300>] tcp_push_one+0x30/0x40 [<ffffffff815e6672>] tcp_sendmsg+0xe82/0x1040 [<ffffffff81614495>] inet_sendmsg+0x125/0x230 [<ffffffff81614370>] ? inet_create+0x6b0/0x6b0 [<ffffffff8157e6e2>] ? sock_update_classid+0xc2/0x3b0 [<ffffffff8157e750>] ? sock_update_classid+0x130/0x3b0 [<ffffffff81576cdc>] sock_sendmsg+0xdc/0xf0 [<ffffffff81162579>] ? fget_light+0x3f9/0x4f0 [<ffffffff81579ece>] sys_sendto+0xfe/0x130 [<ffffffff810a69ad>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff8174a0b0>] ? _raw_spin_unlock_irq+0x30/0x50 [<ffffffff810757e3>] ? finish_task_switch+0x83/0xf0 [<ffffffff810757a6>] ? finish_task_switch+0x46/0xf0 [<ffffffff81752cb7>] ? sysret_check+0x1b/0x56 [<ffffffff81752c92>] system_call_fastpath+0x16/0x1b Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wei Yongjun authored
Using list_move_tail() instead of list_del() + list_add_tail(). spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Rothwell authored
Fixes this build error: net/ipv6/netfilter/nf_nat_l3proto_ipv6.c: In function 'nf_nat_ipv6_csum_recalc': net/ipv6/netfilter/nf_nat_l3proto_ipv6.c:144:4: error: implicit declaration of function 'csum_ipv6_magic' [-Werror=implicit-function-declaration] Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vipul Pandya authored
Removed duplicate definition for SGE_PF_KDOORBELL, SGE_INT_ENABLE3, PCIE_MEM_ACCESS_OFFSET registers. Moved the register field definitions around the register definition. Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Reviewed-by: Sivakumar Subramani <sivasu@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vipul Pandya authored
cxgb4 driver has duplicate definitions of registers which will be removed. This patch updates the RDMA/cxgb4 driver accordingly. Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Reviewed-by: Sivakumar Subramani <sivasu@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
Currently when the NIC duplex state is DUPLEX_UNKNOWN it is exported as full through sysfs, this patch adds support for DUPLEX_UNKNOWN. It is handled the same way as in ethtool. Signed-off-by: Nikolay Aleksandrov <naleksan@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Oliver Neukum authored
This reverts commit 5d65878d7031b6c39054b282faceff406bb2fda9. The upper layers call usbnet_start_xmit() with a valid skb. However cdc_ncm abuses this method by calling it with NULL to trigger IO for the aggregated private skb holding erlier packets. Until cdc_ncm is fixed, the check for NULL must be reintroduced. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Anastasov authored
Add support for genl "tcp_metrics". No locking is changed, only that now we can unlink and delete entries after grace period. We implement get/del for single entry and dump to support show/flush filtering in user space. Del without address attribute causes flush for all addresses, sadly under genl_mutex. v2: - remove rcu_assign_pointer as suggested by Eric Dumazet, it is not needed because there are no other writes under lock - move the flushing code in tcp_metrics_flush_all v3: - remove synchronize_rcu on flush as suggested by Eric Dumazet Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eliezer Tamir authored
Remove a for loop that does nothing in ixgbe_probe(). This is a remnant from when we had IO bars (compare to the ixgb code). Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Akeem G. Abodunrin authored
This patch add ethtool supports for Supported and Advertised Pause Frame, based on Adapter Flow Control settings. Signed-off-by: Akeem G. Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Eric Dumazet authored
Reduce skb truesize by 256 bytes. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Carolyn Wyborny authored
Early release of i210 devices had the loopback test of the ethtool self-test disabled. This patch enables the loopback test for i210 devices. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 04 Sep, 2012 8 commits
-
-
Masatake YAMATO authored
lsof reports some of socket descriptors as "can't identify protocol" like: [yamato@localhost]/tmp% sudo lsof | grep dbus | grep iden dbus-daem 652 dbus 6u sock ... 17812 can't identify protocol dbus-daem 652 dbus 34u sock ... 24689 can't identify protocol dbus-daem 652 dbus 42u sock ... 24739 can't identify protocol dbus-daem 652 dbus 48u sock ... 22329 can't identify protocol ... lsof cannot resolve the protocol used in a socket because procfs doesn't provide the map between inode number on sockfs and protocol type of the socket. For improving the situation this patch adds an extended attribute named 'system.sockprotoname' in which the protocol name for /proc/PID/fd/SOCKET is stored. So lsof can know the protocol for a given /proc/PID/fd/SOCKET with getxattr system call. A few weeks ago I submitted a patch for the same purpose. The patch was introduced /proc/net/sockfs which enumerates inodes and protocols of all sockets alive on a system. However, it was rejected because (1) a global lock was needed, and (2) the layout of struct socket was changed with the patch. This patch doesn't use any global lock; and doesn't change the layout of any structs. In this patch, a protocol name is stored to dentry->d_name of sockfs when new socket is associated with a file descriptor. Before this patch dentry->d_name was not used; it was just filled with empty string. lsof may use an extended attribute named 'system.sockprotoname' to retrieve the value of dentry->d_name. It is nice if we can see the protocol name with ls -l /proc/PID/fd. However, "socket:[#INODE]", the name format returned from sockfs_dname() was already defined. To keep the compatibility between kernel and user land, the extended attribute is used to prepare the value of dentry->d_name. Signed-off-by: Masatake YAMATO <yamato@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alan Ott authored
Driver for the Microchip MRF24J40 802.15.4 WPAN module. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Stephen Rothwell says: ==================== After merging the final tree, today's linux-next build (powerpc ppc44x_defconfig) failed like this: net/built-in.o: In function `tcp_fastopen_ctx_free': tcp_fastopen.c:(.text+0x5cc5c): undefined reference to `crypto_destroy_tfm' net/built-in.o: In function `tcp_fastopen_reset_cipher': (.text+0x5cccc): undefined reference to `crypto_alloc_base' net/built-in.o: In function `tcp_fastopen_reset_cipher': (.text+0x5cd6c): undefined reference to `crypto_destroy_tfm' Presumably caused by commit 10467163 ("tcp: TCP Fast Open Server - header & support functions") from the net-next tree. I assume that some dependency on the CRYPTO infrastructure is missing. I have reverted commit 1bed966c ("Merge branch 'tcp_fastopen_server'") for today. ==================== Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wei Yongjun authored
Using list_move_tail() instead of list_del() + list_add_tail(). spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Oliver Neukum authored
usbnet_start_xmit() is always called with a valid skb Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pravin B Shelar authored
Use hash table to store ports of datapath. Allow 64K ports per switch. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
-
-
- 03 Sep, 2012 12 commits
-
-
Yuchung Cheng authored
Use proportional rate reduction (PRR) algorithm to reduce cwnd in CWR state, in addition to Recovery state. Retire the current rate-halving in CWR. When losses are detected via ACKs in CWR state, the sender enters Recovery state but the cwnd reduction continues and does not restart. Rename and refactor cwnd reduction functions since both CWR and Recovery use the same algorithm: tcp_init_cwnd_reduction() is new and initiates reduction state variables. tcp_cwnd_reduction() is previously tcp_update_cwnd_in_recovery(). tcp_ends_cwnd_reduction() is previously tcp_complete_cwr(). The rate halving functions and logic such as tcp_cwnd_down(), tcp_min_cwnd(), and the cwnd moderation inside tcp_enter_cwr() are removed. The unused parameter, flag, in tcp_cwnd_reduction() is also removed. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yuchung Cheng authored
To prepare replacing rate halving with PRR algorithm in CWR state. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yuchung Cheng authored
To prepare replacing rate halving with PRR algorithm in CWR state. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bjørn Mork authored
The rx_urb_size is set to the same value for every device supported by this driver. No need to keep a per-device data structure to do that. Replacing with a macro constant. This was the last device specific info, and removing it allows us to delete the sierra_net_info_data struct. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bjørn Mork authored
Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bjørn Mork authored
Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextPablo Neira Ayuso authored
This merges (3f509c68 netfilter: nf_nat_sip: fix incorrect handling of EBUSY for RTCP expectation) to Patrick McHardy's IPv6 NAT changes.
-
Jan Beulich authored
Despite being just a few bytes of code, they should still have proper annotations. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Michael Wang authored
Since 'list_for_each_continue_rcu' has already been replaced by 'list_for_each_entry_continue_rcu', pass 'list_head' to nf_queue() as a parameter can not benefit us any more. This patch will replace 'list_head' with 'nf_hook_ops' as the parameter of nf_queue() and __nf_queue() to save code. Signed-off-by: Michael Wang <wangyun@linux.vnet.ibm.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Michael Wang authored
Since 'list_for_each_continue_rcu' has already been replaced by 'list_for_each_entry_continue_rcu', pass 'list_head' to nf_iterate() as a parameter can not benefit us any more. This patch will replace 'list_head' with 'nf_hook_ops' as the parameter of nf_iterate() to save code. Signed-off-by: Michael Wang <wangyun@linux.vnet.ibm.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Cong Wang authored
It was scheduled to be removed for a long time. Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: Patrick McHardy <kaber@trash.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: netfilter@vger.kernel.org Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
This patch adds the new nf_ct_timeout_lookup function to encapsulate the timeout policy attachment that is called in the nf_conntrack_in path. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-