- 07 Mar, 2017 17 commits
-
-
Chris Wilson authored
Before we instantiate/pin the backing store for our use, we can prepopulate the shmemfs filp efficiently using a write into the pagecache. We avoid the penalty of instantiating all the pages, important if the user is just writing to a few and never uses the object on the GPU, and using a direct write into shmemfs allows it to avoid the cost of retrieving a page (mostly the clear-before-use, but in theory we could curtail swapin) before it is overwritten. This can be extended later to provide additional specialisation for other backends (other than shmemfs). For now it provides a defense against very large write-only allocations from exhausting all of system memory. v2: Smelling fixes. Fixes: fe115628 ("drm/i915: Implement pwrite without struct-mutex") References: https://bugs.freedesktop.org/show_bug.cgi?id=99107Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.william.auld@gmail.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: <stable@vger.kernel.org> # v4.10+ Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170307120338.7277-2-chris@chris-wilson.co.uk
-
Chris Wilson authored
Once the object has been truncated, it is unrecoverable. To facilitate detection of this state store the error in obj->mm.pages. This is required for the next patch which should be applied to v4.10 (via stable), so we also need to mark this patch for backporting. In that regard, let's consider this to be a fix/improvement too. v2: Avoid dereferencing the ERR_PTR when freeing the object. Fixes: 1233e2db ("drm/i915: Move object backing storage manipulation to its own locking") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: <stable@vger.kernel.org> # v4.10+ Link: http://patchwork.freedesktop.org/patch/msgid/20170307132031.32461-1-chris@chris-wilson.co.ukReviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Paulo Zanoni authored
Move the {skl,bxt}_{i,uni}nit_cdclk declarations to the place where the intel_cdclk.c functions are declared since these functions have moved there. Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1487712207-17181-1-git-send-email-paulo.r.zanoni@intel.com
-
Paulo Zanoni authored
The IS_G4X macro is defined as IS_G45 || IS_GM45. We have two points in our code where we have an if statement checking for GM45 followed by an else if statement checking for IS_G4X. This can be confusing since the IS_G4X check won't be catching the previously-checked GM45. Someone quickly trying to check which functions run on each platform may end up getting confused while reading the code. Fix the potential confusion by limiting the else if statements to only check for the platform that was not already checked earlier in the if ladder. Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1487620842-22893-3-git-send-email-paulo.r.zanoni@intel.com
-
Chris Wilson authored
In order for the missed-irq update to take effect, the device must be idle. So when the user updates the fault injection via debugfs, idle the device. v2: Idle is explicitly required for setting test_irq, and good behaviour for clearing the missed_irq. v3: Use matching types; expanding to more than ulong rings is left as an exercise to the reader. Testcase: igt/drv_missed_irq Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170307155908.14576-1-chris@chris-wilson.co.uk
-
Jani Nikula authored
No functional changes. Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Bob Paauwe <bob.j.paauwe@intel.com> Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Bob Paauwe <bob.j.paauwe@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/fadc3b0de70d2c7db7a6ecbe7121328483330f04.1488810382.git.jani.nikula@intel.com
-
Jani Nikula authored
Emphasize that the VBT file is nowadays more about initializing and running stuff based on the VBT contents, not so much about being a "panel driver". No functional changes. Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Bob Paauwe <bob.j.paauwe@intel.com> Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Bob Paauwe <bob.j.paauwe@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/b13cb012a555ff5eb56b5e4bb2b0205c3e025a99.1488810382.git.jani.nikula@intel.com
-
Jani Nikula authored
The hook names reflect more the phase in the mode set sequence the hooks are called in than what they actually do in terms of the specific encoder. Stick to that scheme, and rename intel_dsi_pre_disable to intel_dsi_disable. Unify the comments around this while at it. No functional changes. v2: Add more sense in the enable/disable hook comments (Ville) Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Bob Paauwe <bob.j.paauwe@intel.com> Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Bob Paauwe <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1488878659-10386-1-git-send-email-jani.nikula@intel.com
-
Jani Nikula authored
Use the prefix intel_dsi_vbt for all the DSI VBT functions. No functional changes. Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Bob Paauwe <bob.j.paauwe@intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Bob Paauwe <bob.j.paauwe@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/0a05abca364f3bc7f9caf90c9bd3a68eef5f222f.1488810382.git.jani.nikula@intel.com
-
Jani Nikula authored
Now that we've stopped using the drm_panel hooks, there aren't any benefits left with using the drm_panel framework. Remove the rest of the drm_panel use. No functional changes. Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Bob Paauwe <bob.j.paauwe@intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Bob Paauwe <bob.j.paauwe@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/6602e36641451952065092401bd6e6cfbe93e208.1488810382.git.jani.nikula@intel.com
-
Jani Nikula authored
Commit 18a00095 ("drm/i915/dsi: Make intel_dsi_enable/disable directly exec VBT sequences") started calling the VBT sequence functions directly instead of using the drm_panel hooks. Remove the last drm_panel hook by calling vbt_panel_get_modes() directly. No functional changes. Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Bob Paauwe <bob.j.paauwe@intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Bob Paauwe <bob.j.paauwe@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/63d0d41f29583507f5968b42b5f52e6574a1f245.1488810382.git.jani.nikula@intel.com
-
Jani Nikula authored
Fact is, there are no other panel drivers except the VBT based one. Simplify the code and maintenance. No functional changes. Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Bob Paauwe <bob.j.paauwe@intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Bob Paauwe <bob.j.paauwe@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/7dfd041dd25e8e930150ede09589bb232f6248d5.1488810382.git.jani.nikula@intel.com
-
Chris Wilson authored
To prevent having to preserve the drm_crtc_state as we clear the intel_crtc_state, only memset our extended state. Fixes: drivers/gpu/drm/i915/intel_display.c: In function ‘clear_intel_crtc_state’: drivers/gpu/drm/i915/intel_display.c:11301:1: error: the frame size of 1056 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] v2: Add a comment and BUILD_BUG_ON to explain the memset() Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170303154644.6709-1-chris@chris-wilson.co.ukReviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Anusha Srivatsa authored
There is a nre version of DMC available for GLK. The release notes mentions: This FW has the fix to remove the hang conditions due to some debug related issues. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by:
Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by:
Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1487793336-31857-1-git-send-email-anusha.srivatsa@intel.com
-
Tvrtko Ursulin authored
It is called from either the process or timer context so it is correct to always disable interrupts. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170306150321.29024-1-tvrtko.ursulin@linux.intel.com
-
Tvrtko Ursulin authored
Timer callback is a known context so it is correct to always disable interrupts. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk>
-
Tvrtko Ursulin authored
It is always called from thread context. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk>
-
- 06 Mar, 2017 6 commits
-
-
Chris Wilson authored
Unbind the vma may happen at any time, outside of the normal GT wakeref. As such it relies on having a wakeref of its own. However, we can forgo clearing the register whilst the device is asleep and just mark it as unused - so that when we do wake up the device, we will clear the unused fence register (see i915_gem_restore_fences). [22423.944631] WARNING: CPU: 3 PID: 26178 at drivers/gpu/drm/i915/intel_drv.h:1739 i915_vma_put_fence+0xf3/0x100 [i915] [22423.946053] RPM wakelock ref not held during HW access [22423.946056] Modules linked in: vgem(E) i915(E) nls_ascii(E) nls_cp437(E) vfat(E) fat(E) x86_pkg_temp_thermal(E) crct10dif_pclmul(E) crc32_pclmul(E) crc32c_intel(E) ghash_clmulni_intel(E) intel_gtt(E) i2c_algo_bit(E) drm_kms_helper(E) syscopyarea(E) sysfillrect(E) evdev(E) aesni_intel(E) aes_x86_64(E) crypto_simd(E) cryptd(E) glue_helper(E) sysimgblt(E) fb_sys_fops(E) prime_numbers(E) drm(E) efivars(E) mei_me(E) lpc_ich(E) mei(E) mfd_core(E) battery(E) video(E) acpi_pad(E) button(E) tpm_tis(E) tpm_tis_core(E) tpm(E) autofs4(E) i2c_i801(E) thermal(E) fan(E) i2c_designware_platform(E) i2c_designware_core(E) [22423.946438] CPU: 2 PID: 26178 Comm: gem_concurrent_ Tainted: G E 4.10.0+ #101 [22423.946513] Hardware name: ��������������������������������� ���������������������������������/���������������������������������, BIOS RYBDWi35.86A.0246.2 [22423.946600] Call Trace: [22423.946641] dump_stack+0x68/0x9f [22423.946703] __warn+0x107/0x130 [22423.946763] warn_slowpath_fmt+0xa8/0xe0 [22423.946825] ? __warn+0x130/0x130 [22423.946868] ? free_hot_cold_page_list+0x53/0x70 [22423.946942] ? mark_lock+0xcc/0x7f0 [22423.946997] ? __lock_is_held+0x84/0x100 [22423.947115] ? i915_vma_put_fence+0x64/0x100 [i915] [22423.947224] i915_vma_put_fence+0xf3/0x100 [i915] [22423.947335] i915_vma_unbind+0x4da/0x560 [i915] [22423.947387] ? rb_erase+0x812/0x8a0 [22423.947439] ? kfree+0xa2/0xd0 [22423.947562] i915_vma_close+0x159/0x180 [i915] [22423.947674] intel_ring_free+0x31/0x50 [i915] [22423.947776] i915_gem_context_free+0x1ff/0x3d0 [i915] [22423.947887] context_close+0x106/0x110 [i915] [22423.947989] context_idr_cleanup+0xc/0x10 [i915] [22423.948041] idr_for_each+0x14d/0x1d0 [22423.948158] ? context_close+0x110/0x110 [i915] [22423.948206] ? get_from_free_list+0x70/0x70 [22423.948261] ? __lock_is_held+0x84/0x100 [22423.948325] ? __mutex_unlock_slowpath+0xd4/0x400 [22423.948448] i915_gem_context_close+0x4b/0x90 [i915] [22423.948544] i915_driver_preclose+0x28/0x50 [i915] [22423.948620] drm_release+0x175/0x690 [drm] [22423.948681] ? fcntl_setlk+0x5e0/0x5e0 [22423.948746] __fput+0x17d/0x300 [22423.948807] ____fput+0x9/0x10 [22423.948859] task_work_run+0xa7/0xe0 [22423.948924] do_exit+0x4d2/0x13e0 [22423.948986] ? mm_update_next_owner+0x320/0x320 [22423.949051] ? __do_page_fault+0x209/0x5c0 [22423.949110] ? mark_held_locks+0x23/0xc0 [22423.949166] ? entry_SYSCALL_64_fastpath+0x5/0xb1 [22423.949232] do_group_exit+0x93/0x160 [22423.949289] SyS_exit_group+0x18/0x20 [22423.949350] entry_SYSCALL_64_fastpath+0x1c/0xb1 [22423.949403] RIP: 0033:0x7f9cc2e154c8 [22423.949484] RSP: 002b:00007ffd7e81b448 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 [22423.949557] RAX: ffffffffffffffda RBX: ffffffff810ef1f0 RCX: 00007f9cc2e154c8 [22423.949617] RDX: 0000000000000000 RSI: 000000000000003c RDI: 0000000000000000 [22423.949677] RBP: ffff880367e9ff98 R08: 00000000000000e7 R09: ffffffffffffff88 [22423.949741] R10: 00007f9cc1d5c000 R11: 0000000000000246 R12: 00007f9cc30f6c30 [22423.949798] R13: 0000000000000000 R14: 00007f9cc30f6c20 R15: 0000000000000003 [22423.949868] ? trace_hardirqs_off_caller+0xc0/0x110 v2: Move the rpm check down a layer so that we still perform the vma/fence update required for the deferred mmio write on resume. v3: Don't touch i915_gem_object_set_cache_level() and leave the rpm to the low level routines (such as i915_vma_put_fence). v4: vma may be null in fence_write, so extract drm_i915_private from fence->i915 Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170306092916.11623-3-chris@chris-wilson.co.ukReviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com>
-
Chris Wilson authored
When we idle, we wakeup the first waiter (checking to see if it missed an earlier wakeup) and disarm the breadcrumbs. However, we now assert that there are no waiter when the interrupt is disabled, triggering an assert if there were multiple waiters when we idled. [ 420.842275] invalid opcode: 0000 [#1] PREEMPT SMP [ 420.842285] Modules linked in: vgem snd_hda_codec_realtek x86_pkg_temp_thermal snd_hda_codec_generic intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_intel snd_hda_codec snd_hwdep mei_me snd_hda_core mei snd_pcm lpc_ich i915 r8169 mii prime_numbers [ 420.842357] CPU: 4 PID: 8714 Comm: kms_pipe_crc_ba Tainted: G U W 4.10.0-CI-CI_DRM_2280+ #1 [ 420.842377] Hardware name: Hewlett-Packard HP Pro 3500 Series/2ABF, BIOS 8.11 10/24/2012 [ 420.842395] task: ffff880117ddce40 task.stack: ffffc90001114000 [ 420.842439] RIP: 0010:__intel_engine_remove_wait+0x1f4/0x200 [i915] [ 420.842454] RSP: 0018:ffffc90001117b18 EFLAGS: 00010046 [ 420.842467] RAX: 0000000000000000 RBX: ffff88010c25c2a8 RCX: 0000000000000001 [ 420.842481] RDX: 0000000000000001 RSI: 00000000ffffffff RDI: ffffc90001117c50 [ 420.842495] RBP: ffffc90001117b58 R08: 0000000011e52352 R09: c4d16acc00000000 [ 420.842511] R10: ffffffff82789eb0 R11: ffff880117ddce40 R12: ffffc90001117c50 [ 420.842525] R13: ffffc90001117c50 R14: 0000000000000078 R15: 0000000000000000 [ 420.842540] FS: 00007fe47dda0a40(0000) GS:ffff88011fb00000(0000) knlGS:0000000000000000 [ 420.842559] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 420.842571] CR2: 00007fd6c0a2cec4 CR3: 000000010a5e5000 CR4: 00000000001406e0 [ 420.842586] Call Trace: [ 420.842595] ? do_raw_spin_lock+0xad/0xb0 [ 420.842635] intel_engine_remove_wait.part.3+0x26/0x40 [i915] [ 420.842678] intel_engine_remove_wait+0xe/0x20 [i915] [ 420.842721] i915_wait_request+0x4f0/0x8c0 [i915] [ 420.842736] ? wake_up_q+0x70/0x70 [ 420.842747] ? wake_up_q+0x70/0x70 [ 420.842787] i915_gem_object_wait_fence+0x7d/0x1a0 [i915] [ 420.842829] i915_gem_object_wait+0x30d/0x520 [i915] [ 420.842842] ? __this_cpu_preempt_check+0x13/0x20 [ 420.842884] i915_gem_wait_ioctl+0x12e/0x2e0 [i915] [ 420.842924] ? i915_gem_wait_ioctl+0x22/0x2e0 [i915] [ 420.842939] drm_ioctl+0x200/0x450 [ 420.842976] ? i915_gem_set_wedged+0x90/0x90 [i915] [ 420.842993] do_vfs_ioctl+0x90/0x6e0 [ 420.843003] ? entry_SYSCALL_64_fastpath+0x5/0xb1 [ 420.843017] ? __this_cpu_preempt_check+0x13/0x20 [ 420.843030] ? trace_hardirqs_on_caller+0xe7/0x200 [ 420.843042] SyS_ioctl+0x3c/0x70 [ 420.843054] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 420.843065] RIP: 0033:0x7fe47c4b9357 [ 420.843075] RSP: 002b:00007ffc3c0633c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 420.843094] RAX: ffffffffffffffda RBX: ffffffff81482393 RCX: 00007fe47c4b9357 [ 420.843109] RDX: 00007ffc3c063400 RSI: 00000000c010646c RDI: 0000000000000004 [ 420.843123] RBP: ffffc90001117f88 R08: 0000000000000008 R09: 0000000000000000 [ 420.843137] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [ 420.843151] R13: 0000000000000004 R14: 00000000c010646c R15: 0000000000000000 [ 420.843168] ? __this_cpu_preempt_check+0x13/0x20 [ 420.843180] Code: 81 48 c7 c1 40 6a 16 a0 48 c7 c2 47 29 15 a0 be 17 01 00 00 48 c7 c7 10 6a 16 a0 e8 c7 ea fe e0 e9 5d ff ff ff 0f 0b 0f 0b 0f 0b <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 e8 67 41 7e e1 [ 420.843325] RIP: __intel_engine_remove_wait+0x1f4/0x200 [i915] RSP: ffffc90001117b18 Fixes: b66255f0 ("drm/i915: Refactor wakeup of the next breadcrumb waiter") Fixes: 67b807a8 ("drm/i915: Delay disabling the user interrupt for breadcrumbs") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170306092916.11623-2-chris@chris-wilson.co.ukReviewed-by:
Mika Kuoppala <mika.kuoppala@intel.com>
-
Maarten Lankhorst authored
Instead of only complaining when we actually miss a vblank, always complain if we take longer than 100 us. This will make it easier to find cases where we potentially miss vblanks. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1488292128-14540-2-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> [mlankhorst: Add commit message.]
-
Maarten Lankhorst authored
This cannot be done reliably during vblank evasasion since the color management registers are not double buffered. The original commit that moved it always during vblank evasion was wrong, so revert it to before vblank evasion again. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 20a34e78 ("drm/i915: Update color management during vblank evasion.") Cc: stable@vger.kernel.org # v4.7+ Link: http://patchwork.freedesktop.org/patch/msgid/1488292128-14540-1-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com>
-
Ander Conselvan de Oliveira authored
Geminilake's DMC is not yet available in the linux-firmware repository. To prevent userspace tools such as mkinitramfs to complain about missing firmware, remove the MODULE_FIRMWARE() tag for now. Fixes: dbb28b5c ("drm/i915/DMC/GLK: Load DMC on GLK") Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <drm-intel-fixes@lists.freedesktop.org> Signed-off-by:
Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Acked-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170306085651.14008-1-ander.conselvan.de.oliveira@intel.com
-
Daniel Vetter authored
Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 03 Mar, 2017 17 commits
-
-
Michal Wajdeczko authored
Generally we are using macros for any hardware identifiers as these may change between Gens. Do the same with hardware engine ids. v2: move hw engine defs to i915_reg.h (Chris) Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170301202615.118632-1-michal.wajdeczko@intel.comReviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk>
-
Chris Wilson authored
As we now take the breadcrumbs spinlock within the interrupt handler, we wish to minimise its hold time. During the interrupt we do not care about the state of the full rbtree, only that of the first element, so we can guard that with a separate lock. v2: Rename first_wait to irq_wait to make it clearer that it is guarded by irq_lock. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170303190824.1330-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Refactor the common task of updating the first_waiter, serialised with the interrupt handler. When we update the first_waiter, we also need to wakeup the new bottom-half in order to complete the actions that we may have delegated to it (such as checking the irq-seqno coherency or waking up other lower priority concurrent waiters). Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170303171422.4735-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Being inside a spinlock signaling that the hardware just completed a request doesn't prevent a second thread already spotting that the request is complete, freeing it and reallocating it! The code currently tries to prevent this using RCU -- but that only prevents the request from being freed, it doesn't prevent us from reallocating it - that requires us to take a reference. [ 206.922985] BUG: spinlock already unlocked on CPU#4, gem_exec_parall/7796 [ 206.922994] lock: 0xffff8801c6047120, .magic: dead4ead, .owner: <none>/-1, .owner_cpu: -1 [ 206.923000] CPU: 4 PID: 7796 Comm: gem_exec_parall Not tainted 4.10.0-CI-Patchwork_4008+ #1 [ 206.923006] Hardware name: System manufacturer System Product Name/Z170M-PLUS, BIOS 1805 06/20/2016 [ 206.923012] Call Trace: [ 206.923014] <IRQ> [ 206.923019] dump_stack+0x67/0x92 [ 206.923023] spin_dump+0x73/0xc0 [ 206.923027] do_raw_spin_unlock+0x79/0xb0 [ 206.923031] _raw_spin_unlock_irqrestore+0x27/0x60 [ 206.923042] dma_fence_signal+0x160/0x230 [ 206.923060] notify_ring+0xae/0x2e0 [i915] [ 206.923073] ? ibx_hpd_irq_handler+0xc0/0xc0 [i915] [ 206.923086] gen8_gt_irq_handler+0x219/0x290 [i915] [ 206.923100] gen8_irq_handler+0x8e/0x6b0 [i915] [ 206.923105] __handle_irq_event_percpu+0x58/0x370 [ 206.923109] handle_irq_event_percpu+0x1e/0x50 [ 206.923113] handle_irq_event+0x34/0x60 [ 206.923117] handle_edge_irq+0xbe/0x150 [ 206.923122] handle_irq+0x15/0x20 [ 206.923126] do_IRQ+0x63/0x130 [ 206.923142] ? i915_mutex_lock_interruptible+0x39/0x140 [i915] [ 206.923148] common_interrupt+0x90/0x90 [ 206.923153] RIP: 0010:osq_lock+0x77/0x110 [ 206.923157] RSP: 0018:ffffc90001cabaa0 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff6e [ 206.923164] RAX: 0000000000000000 RBX: ffff880236d1abc0 RCX: ffff8801ef642fc0 [ 206.923169] RDX: ffff8801ef6427c0 RSI: ffffffff81c6e7fd RDI: ffffffff81c7c848 [ 206.923175] RBP: ffffc90001cabab8 R08: 00000000692bb19b R09: 08c1493200000000 [ 206.923180] R10: 0000000000000001 R11: 0000000000000001 R12: ffff880236cdabc0 [ 206.923185] R13: ffff8802207f00b0 R14: ffffffffa00b7cd9 R15: ffff8802207f0070 [ 206.923191] </IRQ> [ 206.923206] ? i915_mutex_lock_interruptible+0x39/0x140 [i915] [ 206.923213] __mutex_lock+0x649/0x990 [ 206.923217] ? __mutex_lock+0xb0/0x990 [ 206.923221] ? _raw_spin_unlock+0x2c/0x50 [ 206.923226] ? __pm_runtime_resume+0x56/0x80 [ 206.923242] ? i915_mutex_lock_interruptible+0x39/0x140 [i915] [ 206.923249] mutex_lock_interruptible_nested+0x16/0x20 [ 206.923264] i915_mutex_lock_interruptible+0x39/0x140 [i915] [ 206.923270] ? __pm_runtime_resume+0x56/0x80 [ 206.923285] i915_gem_do_execbuffer.isra.15+0x442/0x1d10 [i915] [ 206.923291] ? __lock_acquire+0x449/0x1b50 [ 206.923296] ? __might_fault+0x3e/0x90 [ 206.923301] ? __might_fault+0x87/0x90 [ 206.923305] ? __might_fault+0x3e/0x90 [ 206.923320] i915_gem_execbuffer2+0xb5/0x220 [i915] [ 206.923327] drm_ioctl+0x200/0x450 [ 206.923341] ? i915_gem_execbuffer+0x330/0x330 [i915] [ 206.923348] do_vfs_ioctl+0x90/0x6e0 [ 206.923352] ? __fget+0x108/0x200 [ 206.923356] ? expand_files+0x2b0/0x2b0 [ 206.923361] SyS_ioctl+0x3c/0x70 [ 206.923365] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 206.923369] RIP: 0033:0x7fdd75fc6357 [ 206.923373] RSP: 002b:00007fdd20e59bf8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 206.923380] RAX: ffffffffffffffda RBX: ffffffff81481ff3 RCX: 00007fdd75fc6357 [ 206.923385] RDX: 00007fdd20e59c70 RSI: 0000000040406469 RDI: 0000000000000003 [ 206.923390] RBP: ffffc90001cabf88 R08: 0000000000000040 R09: 00000000000003f7 [ 206.923396] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [ 206.923401] R13: 0000000000000003 R14: 0000000040406469 R15: 0000000001cf9cb0 [ 206.923408] ? __this_cpu_preempt_check+0x13/0x20 Fixes: 56299fb7 ("drm/i915: Signal first fence from irq handler if complete") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100051Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170303144557.4815-1-chris@chris-wilson.co.ukReviewed-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com>
-
Ville Syrjälä authored
Add tracepoints for display FIFO underruns. Makes it more convenient to correlate the underruns with other display tracepoints. v2: s/i915/intel/ in the tracepoint name Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170302171508.1666-19-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
Add a tracepoint for observing changes in the cxsr state. The tracepoint will dump out the frame and scanline counters for each pipe so that the information can be compared with eg. plane update tracepoints. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170302171508.1666-18-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
Add tracepoints for observing the WM/FIFO programming on VLV/CHV. When compared with the plane and pipe update tracepoints this can be used to verify that everything is performed in the right sequence. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170302171508.1666-17-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
Add tracepoints for plane programming. The tracepoints will dump the frame and scanline counters, so this can be used to verify eg. that the plane gets reprogrammed at the right time with respect to watermark programming (if we have appropriate tracepoints for that as well). v2: Rebase due to legacy cursor changes Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170302171508.1666-16-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
We now compute the watermarks correctly, so just return an error if we can't support the configuration. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170302171508.1666-15-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
On VLV/CHV enabling sprite0 when sprite1 has already been enabled may lead to an underrun. This only happens when sprite0 FIFO size is zero prior to enabling it. Hence an effective workaround is to always allocate at least one cacheline for sprite0 when sprite1 is active. I've not observed this sort of failure during any other type of plane enable/disable sequence. v2: s/noninverted/raw/ for consistency with other platforms Testcase: igt/kms_plane_blinker Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170302171508.1666-14-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
Clear out the watermark for all disabled planes to 0. This is required to avoid falsely thinking that the inherited watermarks are bogus in case the watermark is actually higher than the FIFO size. v2: s/noninverted/raw/ for consistency with other platforms Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170302171508.1666-13-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
Now that vlv/chv have more proper wm programming support, let's reduce the the update_wm_{pre,post} flags to only cover the pre-ilk platforms. When we finally convert those as well we can drop these flags entirely. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170302171508.1666-12-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
Remove crtc->wm.cxsr_allowed and just rely on crtc_state->disable_cxsr instead. This was used only by vlv/chv to indicate whether to enable cxsr in the wm computation. That doesn't really work anymore, and as far as the optimal watermarks go we'll just consider the number of planes and the current pipe, and for the intermediate watermarks we'll also start to consider disable_cxsr which is set appropriately when planes are being enabled/disabled. We'll also flip over the crtc_state->wm.need_postvbl_update setup so that it's the wm code that will set it. Previously the generic code set it up, and then the wm code cleared it again if it thought it's not needed after all. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170302171508.1666-11-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
Since the watermark registers arent double buffered on VLV/CHV, we'll need to play around with intermediate watermarks same was as we do on ILK-BDW. The watermark registers on VLV/CHV contain inverted values, so to find the intermediate watermark value we just take the minimum of the active and optimal values. This also means that, unlike ILK-BDW, there's no chance that we'd fail to find a working intermediate watermarks. As long as both the active and optimal watermarks are valid the intermediate watermarks will come out valid as well. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170302171508.1666-10-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
Check whether anything relevant has actually change when we compute new watermarks for each plane in the state. If the watermarks for no primary/sprite planes changed we don't have to recompute the FIFO split or reprogram the DSBARB registers. And even the cursor watermarks didn't change we can skip the merge+invert step between all the planes on the pipe as well. v2: s/noninverted/raw/ for consistency with other platforms v3: Drop duplicated vlv_get_fifo_size() call during init Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170302171508.1666-9-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
Start computing the vlv/chv watermarks the atomic way, from the .compute_pipe_wm() hook. We'll recompute the actual watermarks for only planes that are part of the state, the other planes will keep their watermark from the last time it was computed. And the actual watermark programming will happen from the .initial_watermarks() hook. For now we'll just compute the optimal watermarks, and we'll hook up the intermediate watermarks properly later. The DSPARB registers responsible for the FIFO paritioning are double buffered, so they will be programming from intel_begin_crtc_commit(). v2: s/noninverted/raw/ for consistency with other platforms s/vlv_plane_wm_set/vlv_raw_plane_wm_set/ for clarity Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170302171508.1666-8-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
Let's compute the watermarks first and the FIFO size second. This way we can make sure the FIFO split is the most accommodating to the watermarks. Previously we could have potentially computed a FIFO split that couldn't accommodate the PM2 watermarks simply due to a bad split even if the total FIFO size would have been sufficient. It'll also allow us to avoid recomputing the wms for all planes whenever the FIFO split would change. Thus we don't have to add any extra planes to the state when the FIFO needs to be repartitioned. To help with this we'll keep around copies of the non-inverted watermarks in the crtc state. For now that doesn't help too much, but once we start to do the watermark computation only for the planes that change we'll need the non-inverted values around for the other planes. v2: s/noninverted/raw/ for consistency with other platforms Fix the memset() of the "raw" watermarks Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170302171508.1666-7-ville.syrjala@linux.intel.com
-