- 18 Apr, 2017 33 commits
-
-
Benjamin Herrenschmidt authored
Hopefully my understanding of how the hardware works is correct, as the documentation isn't completely clear. So far I have seen no obvious issue. Pause seem to also work with NC-SI. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Benjamin Herrenschmidt authored
A non-wired up implementation accidentally made its way in a previous patch (Make ring sizes configurable via ethtool). This removes it and wires up the generic phy_ethtool_nway_reset instead. Signed-off-by:
-
David S. Miller authored
Markus Elfring says: ==================== Ethernet-Marvell: Fine-tuning for several function implementations Several update suggestions were taken into account from static source code analysis. ==================== Signed-off-by: -
Markus Elfring authored
A string which did not contain a data format specification should be put into a sequence. Thus use the corresponding function "seq_puts". This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
Markus Elfring authored
The script "checkpatch.pl" pointed information out like the following. Comparison to NULL could be written "!skge->mem". Thus fix the affected source code place. Signed-off-by:
-
Markus Elfring authored
A string which did not contain a data format specification should be put into a sequence. Thus use the corresponding function "seq_puts". This issue was detected by using the Coccinelle software. Signed-off-by:
-
Markus Elfring authored
MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The script “checkpatch.pl” pointed information out like the following. Comparison to NULL could be written … Thus fix the affected source code places. Signed-off-by:
-
Markus Elfring authored
Multiplications for the size determination of memory allocations indicated that array data structures should be processed. Thus use the corresponding function "kcalloc". This issue was detected by using the Coccinelle software. Signed-off-by:
-
Markus Elfring authored
The script "checkpatch.pl" pointed information out like the following. Comparison to NULL could be written "txq->descs". Thus fix the affected source code place. Signed-off-by:
-
Markus Elfring authored
Adjust jump labels according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
Adjust jump labels according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
Adjust jump labels according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
Adjust jump labels according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
Use the word "failed" in the string for three function calls. Signed-off-by:
-
Markus Elfring authored
Adjust jump labels according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
The script "checkpatch.pl" pointed out that labels should not be indented. Thus delete two horizontal tabs before the jump label "err_drop_frame" in the function "mvpp2_rx". Signed-off-by:
-
Markus Elfring authored
Replace the specification of two data structures by pointer dereferences as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
Replace the specification of data structures by references to a local variable as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer. Signed-off-by:
-
Markus Elfring authored
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
Replace the specification of two data structures by pointer dereferences as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
* A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "kmalloc_array". This issue was detected by using the Coccinelle software. * Replace the specification of a data structure by a pointer dereference to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The script “checkpatch.pl” pointed information out like the following. Comparison to NULL could be written … Thus fix the affected source code places. Signed-off-by:
-
Markus Elfring authored
A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "kmalloc_array". This issue was detected by using the Coccinelle software. Signed-off-by:
-
Markus Elfring authored
Replace the specification of two data structures by pointer dereferences as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
* A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "devm_kmalloc_array". This issue was detected by using the Coccinelle software. * Replace the specification of a data type by a pointer dereference to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
-
Florian Westphal authored
commit 83e7e4ce ("mac80211: Use rhltable instead of rhashtable") removed the last user that made use of 'insecure_elasticity' parameter, i.e. the default of 16 is used everywhere. Replace it with a constant. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
David S. Miller authored
Xin Long says: ==================== sctp: add proper process for duplicated stream reconf requests Now sctp stream reconf will process a request again even if it's seqno is less than asoc->strreset_inseq. It may cause a replay attack. This patchset is to avoid it by add proper process for all duplicated stream reconf requests. ==================== Signed-off-by: -
Xin Long authored
This patch is to fix the replay attack issue for strreset asoc requests. When a duplicated strreset asoc request is received, reply it with bad seqno if it's seqno < asoc->strreset_inseq - 2, and reply it with the result saved in asoc if it's seqno >= asoc->strreset_inseq - 2. But note that if the result saved in asoc is performed, the sender's next tsn and receiver's next tsn for the response chunk should be set. It's safe to get them from asoc. Because if it's changed, which means the peer has received the response already, the new response with wrong tsn won't be accepted by peer. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Xin Long authored
This patch is to fix the replay attack issue for strreset and addstrm in requests. When a duplicated strreset in or addstrm in request is received, reply it with bad seqno if it's seqno < asoc->strreset_inseq - 2, and reply it with the result saved in asoc if it's seqno >= asoc->strreset_inseq - 2. For strreset in or addstrm in request, if the receiver side processes it successfully, a strreset out or addstrm out request(as a response for that request) will be sent back to peer. reconf_time will retransmit the out request even if it's lost. So when receiving a duplicated strreset in or addstrm in request and it's result was performed, it shouldn't reply this request, but drop it instead. Signed-off-by:
-
Xin Long authored
Now sctp stream reconf will process a request again even if it's seqno is less than asoc->strreset_inseq. If one request has been done successfully and some data chunks have been accepted and then a duplicated strreset out request comes, the streamin's ssn will be cleared. It will cause that stream will never receive chunks any more because of unsynchronized ssn. It allows a replay attack. A similar issue also exists when processing addstrm out requests. It will cause more extra streams being added. This patch is to fix it by saving the last 2 results into asoc. When a duplicated strreset out or addstrm out request is received, reply it with bad seqno if it's seqno < asoc->strreset_inseq - 2, and reply it with the result saved in asoc if it's seqno >= asoc->strreset_inseq - 2. Note that it saves last 2 results instead of only last 1 result, because two requests can be sent together in one chunk. And note that when receiving a duplicated request, the receiver side will still reply it even if the peer has received the response. It's safe, As the response will be dropped by the peer. Signed-off-by:
-
- 17 Apr, 2017 7 commits
-
-
Chonggang Li authored
Bonding driver changes the skb->dev to the bonding-master before passing the packet to stack for further processing. This, however does not make sense for the link-local packets and it loses "the link info" once its skb->dev is changed to bonding-master. This patch changes this behavior for link-local packets by not changing the skb->dev to the bonding-master and maintaining it as it is, i.e. the link on which the packet arrived. Signed-off-by:
Chonggang Li <chonggangli@google.com> Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Signed-off-by:
Maciej Żenczykowski <maze@google.com> Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
-
David Ahern authored
Add netlink_ext_ack arg to rtnl_doit_func. Pass extack arg to nlmsg_parse for doit functions that call it directly. This is the first step to using extended error reporting in rtnetlink. >From here individual subsystems can be updated to set netlink_ext_ack as needed. Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
David Lebrun authored
When a locally generated packet receives an SRH with two or more segments, the remaining headroom is too small to push an ethernet header. This patch ensures that the headroom is large enough after SRH push. The BUG generated the following trace. [ 192.950285] skbuff: skb_under_panic: text:ffffffff81809675 len:198 put:14 head:ffff88006f306400 data:ffff88006f3063fa tail:0xc0 end:0x2c0 dev:A-1 [ 192.952456] ------------[ cut here ]------------ [ 192.953218] kernel BUG at net/core/skbuff.c:105! [ 192.953411] invalid opcode: 0000 [#1] PREEMPT SMP [ 192.953411] Modules linked in: [ 192.953411] CPU: 5 PID: 3433 Comm: ping6 Not tainted 4.11.0-rc3+ #237 [ 192.953411] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.1-0-g8891697-prebuilt.qemu-project.org 04/01/2014 [ 192.953411] task: ffff88007c2d42c0 task.stack: ffffc90000ef4000 [ 192.953411] RIP: 0010:skb_panic+0x61/0x70 [ 192.953411] RSP: 0018:ffffc90000ef7900 EFLAGS: 00010286 [ 192.953411] RAX: 0000000000000085 RBX: 00000000000086dd RCX: 0000000000000201 [ 192.953411] RDX: 0000000080000201 RSI: ffffffff81d104c5 RDI: 00000000ffffffff [ 192.953411] RBP: ffffc90000ef7920 R08: 0000000000000001 R09: 0000000000000000 [ 192.953411] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ 192.953411] R13: ffff88007c5a4000 R14: ffff88007b363d80 R15: 00000000000000b8 [ 192.953411] FS: 00007f94b558b700(0000) GS:ffff88007fd40000(0000) knlGS:0000000000000000 [ 192.953411] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 192.953411] CR2: 00007fff5ecd5080 CR3: 0000000074141000 CR4: 00000000001406e0 [ 192.953411] Call Trace: [ 192.953411] skb_push+0x3b/0x40 [ 192.953411] eth_header+0x25/0xc0 [ 192.953411] neigh_resolve_output+0x168/0x230 [ 192.953411] ? ip6_finish_output2+0x242/0x8f0 [ 192.953411] ip6_finish_output2+0x242/0x8f0 [ 192.953411] ? ip6_finish_output2+0x76/0x8f0 [ 192.953411] ip6_finish_output+0xa8/0x1d0 [ 192.953411] ip6_output+0x64/0x2d0 [ 192.953411] ? ip6_output+0x73/0x2d0 [ 192.953411] ? ip6_dst_check+0xb5/0xc0 [ 192.953411] ? dst_cache_per_cpu_get.isra.2+0x40/0x80 [ 192.953411] seg6_output+0xb0/0x220 [ 192.953411] lwtunnel_output+0xcf/0x210 [ 192.953411] ? lwtunnel_output+0x59/0x210 [ 192.953411] ip6_local_out+0x38/0x70 [ 192.953411] ip6_send_skb+0x2a/0xb0 [ 192.953411] ip6_push_pending_frames+0x48/0x50 [ 192.953411] rawv6_sendmsg+0xa39/0xf10 [ 192.953411] ? __lock_acquire+0x489/0x890 [ 192.953411] ? __mutex_lock+0x1fc/0x970 [ 192.953411] ? __lock_acquire+0x489/0x890 [ 192.953411] ? __mutex_lock+0x1fc/0x970 [ 192.953411] ? tty_ioctl+0x283/0xec0 [ 192.953411] inet_sendmsg+0x45/0x1d0 [ 192.953411] ? _copy_from_user+0x54/0x80 [ 192.953411] sock_sendmsg+0x33/0x40 [ 192.953411] SYSC_sendto+0xef/0x170 [ 192.953411] ? entry_SYSCALL_64_fastpath+0x5/0xc2 [ 192.953411] ? trace_hardirqs_on_caller+0x12b/0x1b0 [ 192.953411] ? trace_hardirqs_on_thunk+0x1a/0x1c [ 192.953411] SyS_sendto+0x9/0x10 [ 192.953411] entry_SYSCALL_64_fastpath+0x1f/0xc2 [ 192.953411] RIP: 0033:0x7f94b453db33 [ 192.953411] RSP: 002b:00007fff5ecd0578 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 192.953411] RAX: ffffffffffffffda RBX: 00007fff5ecd16e0 RCX: 00007f94b453db33 [ 192.953411] RDX: 0000000000000040 RSI: 000055a78352e9c0 RDI: 0000000000000003 [ 192.953411] RBP: 00007fff5ecd1690 R08: 000055a78352c940 R09: 000000000000001c [ 192.953411] R10: 0000000000000000 R11: 0000000000000246 R12: 000055a783321e10 [ 192.953411] R13: 000055a7839890c0 R14: 0000000000000004 R15: 0000000000000000 [ 192.953411] Code: 00 00 48 89 44 24 10 8b 87 c4 00 00 00 48 89 44 24 08 48 8b 87 d8 00 00 00 48 c7 c7 90 58 d2 81 48 89 04 24 31 c0 e8 4f 70 9a ff <0f> 0b 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 48 8b 97 d8 00 00 [ 192.953411] RIP: skb_panic+0x61/0x70 RSP: ffffc90000ef7900 [ 193.000186] ---[ end trace bd0b89fabdf2f92c ]--- [ 193.000951] Kernel panic - not syncing: Fatal exception in interrupt [ 193.001137] Kernel Offset: disabled [ 193.001169] ---[ end Kernel panic - not syncing: Fatal exception in interrupt Fixes: 19d5a26f ("ipv6: sr: expand skb head only if necessary") Signed-off-by:
David Lebrun <david.lebrun@uclouvain.be> Signed-off-by:
-
Ilan Tayari authored
Commit 07b26c94 ("gso: Support partial splitting at the frag_list pointer") assumes that all SKBs in a frag_list (except maybe the last one) contain the same amount of GSO payload. This assumption is not always correct, resulting in the following warning message in the log: skb_segment: too many frags For example, mlx5 driver in Striding RQ mode creates some RX SKBs with one frag, and some with 2 frags. After GRO, the frag_list SKBs end up having different amounts of payload. If this frag_list SKB is then forwarded, the aforementioned assumption is violated. Validate the assumption, and fall back to software GSO if it not true. Fixes: 07b26c94 ("gso: Support partial splitting at the frag_list pointer") Signed-off-by:
Ilan Tayari <ilant@mellanox.com> Signed-off-by:
Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by:
-
Xin Long authored
Now when processing strreset out responses, it gets outreq->list_of_streams only when result is performed. But if result is not performed, str_p will be NULL. It will cause panic in sctp_ulpevent_make_stream_reset_event if nums is not 0. This patch is to fix it by getting outreq->list_of_streams earlier, and also to improve some codes for the strreset inreq process. Signed-off-by:
-
Chenbo Feng authored
BPF helper functions get_socket_cookie and get_socket_uid can be used for network traffic classifications, among others. Expose them also to programs of type BPF_PROG_TYPE_CGROUP_SKB. As of commit 8f917bba ("bpf: pass sk to helper functions") the required skb->sk function is available at both cgroup bpf ingress and egress hooks. With these two new helper, cg_skb_func_proto is effectively the same as sk_filter_func_proto. Change since V1: Instead of add the helper to cg_skb_func_proto, redirect the cg_skb_func_proto to sk_filter_func_proto since all helper function in sk_filter_func_proto are applicable to cg_skb_func_proto now. Signed-off-by:
Chenbo Feng <fengc@google.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Simon Xiao authored
The netvsc device supports full duplex by default. This warnings in log from bonding device which did not like seeing UNKNOWN duplex. Signed-off-by:
Simon Xiao <sixiao@microsoft.com> Signed-off-by:
-
