- 15 Sep, 2014 1 commit
-
-
Marcel Holtmann authored
The struct bt_skb_cb size needs to stay within the limits of skb->cb at all times and to ensure that add a BUILD_BUG_ON to check for it at compile time. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
- 14 Sep, 2014 2 commits
-
-
Marcel Holtmann authored
The complete TX URB handling is done via a switch statement in the btusb_send_frame function. To allow for more clear separation between control, bulk and isoc URBs, split them into allocation and submission. Previously the inc_tx function has been used for tracking in-flight URB for HCI commands and ACL data packets. Convert that into a common function that either submits the URB or queues it when needed. This provides the flexibility to allow vendor specific hdev->send_frame callbacks without having to duplicate the whole URB handling logic. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Johan Hedberg authored
All hdev->send() calls are these days done through a work queue. For the btusb driver this means the btusb_send_frame() function. Because of this we can safely use GFP_KERNEL for all memory allocations in this code path. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
- 12 Sep, 2014 1 commit
-
-
Johan Hedberg authored
The hci_update_random_address will clear the RPA_EXPIRED flag and proceed with setting a new one if the flag was set. However, the set_random_addr() function that is called may choose to defer the update to a later moment. In such a case the flag would incorrectly remain unset unless set_random_addr() re-sets it. This patch fixes the issue. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
- 11 Sep, 2014 8 commits
-
-
Johan Hedberg authored
If encryption fails and we're using an RPA it may be because of a conflict with another device. To avoid repeated failures the safest action is to simply mark the RPA as expired so that a new one gets generated as soon as the connection drops. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
This is a trivial change to use a proper define for the NoInputNoOutput IO capability instead of hard-coded values. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
Even if we have no connection-oriented channels we should perform the L2CAP Information Request procedures before notifying L2CAP channels of the connection. This is so that the L2CAP channel implementations can perform checks on what the remote side supports (e.g. does it support the fixed channel in question). So far the code has relied on the l2cap_do_start() function to initiate the Information Request, however l2cap_do_start() is used on a per-channel basis and only for connection-oriented channels. This means that if there are no connection-oriented channels on the system we would never start the Information Request procedure. This patch creates a new l2cap_request_info() helper function to initiate the Information Request procedure, and ensures that it is called whenever a BR/EDR connection has been established. The patch also updates fixed channels to be notified of connection readiness only once the Information Request procedure has completed. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
There are several places that need to determine the security level that an LTK can provide. This patch adds a convenience function for this to help make the code more readable. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
When the local IO capability is NoInputNoOutput any attempt to convert the remote authentication requirement to a target security level is futile. This patch makes sure that we set the target security level at most to MEDIUM if the local IO capability is NoInputNoOutput. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
All the cases where we mark SMP commands as dissalowed are their respective command handlers. We can therefore simplify the code by always clearing the bit immediately after testing it. This patch converts the corresponding test_bit() call to a test_and_clear_bit() call and also removes the now unused SMP_DISALLOW_CMD macro. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
The SMP specification states that we should ignore any unknown bits from the authentication requirement. We already have a define for masking out unknown bits but we haven't used it in all places so far. This patch adds usage of the AUTH_REQ_MASK to all places that need it and ensures that we don't pass unknown bits onward to other functions. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
We do nothing else with the auth variable in smp_cmd_pairing_rsp() besides passing it to tk_request() which in turn only cares about whether one of the sides had the MITM bit set. It is therefore unnecessary to assign a value to it until just before calling tk_request(), and this value can simply be the bit-wise or of the local and remote requirements. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
- 09 Sep, 2014 6 commits
-
-
Johan Hedberg authored
If the remote side is not distributing its IRK but is distributing the CSRK the next PDU after master identification is the Signing Information. This patch fixes a missing SMP_ALLOW_CMD() for this in the smp_cmd_master_ident() function. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Jukka Rissanen authored
Packets that are supposed to be delivered via the peer device need to be checked and sent to correct device. This requires that user has set the routes properly so that the 6lowpan module can then figure out the destination gateway and the correct Bluetooth device. Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org # 3.17.x
-
Jukka Rissanen authored
The peer IPv6 address contained wrong U/L bit in the EUI-64 part. Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org # 3.17.x
-
Jukka Rissanen authored
Use the default connection timeout value defined in l2cap.h because the current timeout was too short and most of the time the connection attempts timed out. Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org # 3.17.x
-
Champion Chen authored
Suspend could fail for some platforms because btusb_suspend==> btusb_stop_traffic ==> usb_kill_anchored_urbs. When btusb_bulk_complete returns before system suspend and resubmits an URB, the system cannot enter suspend state. Signed-off-by: Champion Chen <champion_chen@realsil.com.cn> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
-
Johan Hedberg authored
Whether through HCI with BR/EDR or SMP with LE when authentication fails we should also notify any pending Pair Device mgmt command. This patch updates the mgmt_auth_failed function to take the actual hci_conn object and makes sure that any pending pairing command is notified and cleaned up appropriately. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
- 08 Sep, 2014 22 commits
-
-
Johan Hedberg authored
This patch fixes the following type of static analyzer warning (and probably a real bug as well as the NULL check should be there for a reason): net/bluetooth/smp.c:1182 smp_conn_security() warn: variable dereferenced before check 'conn' (see line 1174) Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Behan Webster authored
Replaced the use of a Variable Length Array In Struct (VLAIS) with a C99 compliant equivalent. This patch allocates the appropriate amount of memory using an char array. The new code can be compiled with both gcc and clang. struct shash_desc contains a flexible array member member ctx declared with CRYPTO_MINALIGN_ATTR, so sizeof(struct shash_desc) aligns the beginning of the array declared after struct shash_desc with long long. No trailing padding is required because it is not a struct type that can be used in an array. The CRYPTO_MINALIGN_ATTR is required so that desc is aligned with long long as would be the case for a struct containing a member with CRYPTO_MINALIGN_ATTR. Signed-off-by: Behan Webster <behanw@converseincode.com> Signed-off-by: Mark Charlebois <charlebm@gmail.com> Signed-off-by: Jan-Simon Möller <dl9pf@gmx.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
SMP defines quite clearly when certain PDUs are to be expected/allowed and when not, but doesn't have any explicit request/response definition. So far the code has relied on each PDU handler to behave correctly if receiving PDUs at an unexpected moment, however this requires many different checks and is prone to errors. This patch introduces a generic way to keep track of allowed PDUs and thereby reduces the responsibility & load on individual command handlers. The tracking is implemented using a simple bit-mask where each opcode maps to its own bit. If the bit is set the corresponding PDU is allow and if the bit is not set the PDU is not allowed. As a simple example, when we send the Pairing Request we'd set the bit for Pairing Response, and when we receive the Pairing Response we'd clear the bit for Pairing Response. Since the disallowed PDU rejection is now done in a single central place we need to be a bit careful of which action makes most sense to all cases. Previously some, such as Security Request, have been simply ignored whereas others have caused an explicit disconnect. The only PDU rejection action that keeps good interoperability and can be used for all the applicable use cases is to drop the data. This may raise some concerns of us now being more lenient for misbehaving (and potentially malicious) devices, but the policy of simply dropping data has been a successful one for many years e.g. in L2CAP (where this is the *only* policy for such cases - we never request disconnection in l2cap_core.c because of bad data). Furthermore, we cannot prevent connected devices from creating the SMP context (through a Security or Pairing Request), and once the context exists looking up the corresponding bit for the received opcode and deciding to reject it is essentially an equally lightweight operation as the kind of rejection that l2cap_core.c already successfully does. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
When we're in the process of receiving keys in phase 3 of SMP we keep track of which keys are still expected in the smp->remote_key_dist variable. If we still have some key bits set we need to continue waiting for more PDUs and not needlessly call smp_distribute_keys(). This patch fixes two such cases in the smp_cmd_master_ident() and smp_cmd_ident_addr_info() handler functions. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
This patch adds a define for the allowed bits of the key distribution mask so we don't have to have magic 0x07 constants throughout the code. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
Before the move the l2cap_chan the SMP context (smp_chan) didn't have any kind of proper locking. The best there existed was the HCI_CONN_LE_SMP_PEND flag which was used to enable mutual exclusion for potential multiple creators of the SMP context. Now that SMP has been converted to use the l2cap_chan infrastructure and since the SMP context is directly mapped to a corresponding l2cap_chan we get the SMP context locking essentially for free through the l2cap_chan lock. For all callbacks that l2cap_core.c makes for each channel implementation (smp.c in the case of SMP) the l2cap_chan lock is held through l2cap_chan_lock(chan). Since the calls from l2cap_core.c to smp.c are covered the only missing piece to have the locking implemented properly is to ensure that the lock is held for any other call path that may access the SMP context. This means user responses through mgmt.c, requests to elevate the security of a connection through hci_conn.c, as well as any deferred work through workqueues. This patch adds the necessary locking to all these other code paths that try to access the SMP context. Since mutual exclusion for the l2cap_chan access is now covered from all directions the patch also removes unnecessary HCI_CONN_LE_SMP_PEND flag (once we've acquired the chan lock we can simply check whether chan->smp is set to know if there's an SMP context). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
Now that the identity address update happens through its own deferred work there's no need to have smp_distribute_keys anymore behind a second deferred work. This patch removes this extra construction and makes the code do direct calls to smp_distribute_keys() again. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
The identity address update of all channels for an l2cap_conn needs to take the lock for each channel, i.e. it's safest to do this by a separate workqueue callback. Previously this was partially solved by moving the entire SMP key distribution behind a workqueue. However, if we want SMP context locking to be correct and safe we should always use the l2cap_chan lock when accessing it, meaning even smp_distribute_keys needs to take that lock which would once again create a dead lock when updating the identity address. The simplest way to solve this is to have l2cap_conn manage the deferred work which is what this patch does. A subsequent patch will remove the now unnecessary SMP key distribution work struct. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
When smp_resume_cb is called if we're not encrypted (i.e. the callback wasn't called because the connection became encrypted) we shouldn't take any action at all. This patch moves also the security_timer cancellation behind this condition. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
The SMP security timer used to be able to modify the SMP context state but now days it simply calls hci_disconnect(). It is therefore unnecessary to have extra sanity checks for the SMP context after canceling the timer. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
The "pending" L2CAP response value is not defined for LE CoC. This patch adds a clarifying comment to the code so that the reader will not think there is a bug in trying to use this value for LE CoC. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
To give all hci_disconnect() users the advantage of getting the clock offset read automatically this patch moves the necessary code from hci_conn_timeout() into hci_disconnect(). This way we pretty much always update the clock offset when disconnecting. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
There's no reason to custom build the HCI_Disconnect command in the Disconnect Device mgmt command handler. This patch updates the code to use hci_disconnect() instead. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
We'll soon use hci_disconnect() from places that are interested to know whether the hci_send_cmd() really succeeded or not. This patch updates hci_disconnect() to pass on any error returned from hci_send_cmd(). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
Returning failure from the SMP data parsing function will cause an immediate disconnect, making any attempts to send a response PDU futile. This patch updates the function to always either send a response or return an error, but never both at the same time: * In the case that HCI_LE_ENABLED is not set we want to send a Pairing Not Supported response but it is not required to force a disconnection, so do not set the error return in this case. * If we get garbage SMP data we can just fail with the handler function instead of also trying to send an SMP Failure PDU. * There's no reason to force a disconnection if we receive an unknown SMP command. Instead simply send a proper Command Not Supported SMP response. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
Now that there are no more users of the l2cap_conn_shutdown API (since smp.c switched to using hci_disconnect) we can simply remove it along with all of it's l2cap_conn variables. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
Relying on the l2cap_conn_del procedure (triggered through the l2cap_conn_shutdown API) to get the connection disconnected is not reliable as it depends on all users releasing (through hci_conn_drop) and that there's at least one user (so hci_conn_drop is called at least one time). A much simpler and more reliable solution is to call hci_disconnect() directly from the SMP code when we want to disconnect. One side-effect this has is that it prevents any SMP Failure PDU from being sent before the disconnection, however neither one of the scenarios where l2cap_conn_shutdown was used really requires this. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
When the l2cap_conn_del() function is used we do not want to wait around "in case something happens" before disconnecting. This patch sets the disconnection timeout to 0 so that the disconnection routines get immediately scheduled. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
We can't have hci_chan contribute to the "active" reference counting of the hci_conn since otherwise the connection would never get dropped when there are no more users (since hci_chan would be counted as a user). This patch removes hold() when creating the hci_chan and drop() when destroying it. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
When hci_chan_del is called the disconnection routines get scheduled through a workqueue. If there's any incoming ACL data before the routines get executed there's a chance that a new hci_chan is created and the disconnection never happens. This patch adds a new hci_conn flag to indicate that we're in the process of driving the connection down. We set the flag in hci_chan_del and check for it in hci_chan_create so that no new channels are created for the same connection. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
The hci_chan_del() function is used in scenarios where we've decided we want to get rid of the underlying baseband link. It makes therefore sense to force the disc_timeout to 0 so that the disconnection routines are immediately scheduled. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
The hci_chan_del() function was doing a hci_conn_drop() but there was no matching hci_conn_hold() in the hci_chan_create() function. Furthermore, as the hci_chan struct holds a pointer to the hci_conn there should be proper use of hci_conn_get/put. This patch fixes both issues so that hci_chan does correct reference counting of the hci_conn object. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-