- 16 Jun, 2020 1 commit
-
-
Daniel Vetter authored
Allows us to remove a bit of cleanup code. Reviewed-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Emil Velikov <emil.velikov@collabora.com> Cc: "Noralf Trønnes" <noralf@tronnes.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Y.C. Chen" <yc_chen@aspeedtech.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-58-daniel.vetter@ffwll.ch
-
- 15 Jun, 2020 6 commits
-
-
Emil Velikov authored
Platform drivers now have the option to have the platform core create and remove any needed sysfs attribute files. So take advantage of that and do not register "by hand" a sysfs file. Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Emil Velikov <emil.l.velikov@gmail.com> Tested-by:
Liviu Dudau <liviu.dudau@arm.com> Acked-by:
-
Emil Velikov authored
Add the COMPILE_TEST conditional, so that people can at least build test the drivers. Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Emil Velikov authored
Add some information about pre-atomic modeset properties alongside a list of suggestions how to handle the different instances. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200603170434.2363446-1-emil.l.velikov@gmail.com
-
Emil Velikov authored
Currently the ret handling is all over the place - with two redundant assignments and another one addressed earlier. Use the exact same flow in both functions. v2: straighten the code flow, instead of just removing the assignments Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Colin Ian King <colin.king@canonical.com> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200530124640.4176323-2-emil.l.velikov@gmail.com
-
Emil Velikov authored
The function always returns zero (success). Ideally we'll remove it all together - although that's requires a little more work. For now, we can drop the return type and simplify the drm core code surrounding it. v2: remove redundant assignment (Sam) Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Roland Scheidegger <sroland@vmware.com> Signed-off-by:
Roland Scheidegger <sroland@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200530124640.4176323-1-emil.l.velikov@gmail.com
-
Christian König authored
When the current entry is rejected as candidate for the search it does not mean that we can abort the subtree search. It is perfectly possible that only the alignment, but not the size is the reason for the rejection. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Nirmoy Das <nirmoy.das@amd.com> Link: https://patchwork.freedesktop.org/patch/369394/
-
- 11 Jun, 2020 19 commits
-
-
Imre Deak authored
Atm, a pending delayed destroy work during module removal will be canceled, leaving behind MST ports, mstbs. Fix this by using a dedicated workqueue which will be drained of requeued items as well when destroying it. v2: - Check if wq is NULL before calling destroy_workqueue(). Cc: Lyude Paul <lyude@redhat.com> Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Reviewed-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Reviewed-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200610134704.25270-1-imre.deak@intel.com
-
Imre Deak authored
During the initial MST probing an MST port's I2C device will be registered using the kdev of the DRM device as a parent. Later after MST Connection Status Notifications this I2C device will be re-registered with the kdev of the port's connector. This will also move inconsistently the I2C device's sysfs entry from the DRM device's sysfs dir to the connector's dir. Fix the above by keeping the DRM kdev as the parent of the I2C device. Ideally the connector's kdev would be used as a parent, similarly to non-MST connectors, however that needs some more refactoring to ensure the connector's kdev is already available early enough. So keep the existing (initial) behavior for now. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Imre Deak authored
The WARN below triggers during the removal of an MST port. The problem is that the parent device's (the connector's kdev) sysfs directory is removed recursively when the connector is unregistered (even though the I2C device holds a reference on the parent device). To fix this set first the Peer Device Type to none which will remove the I2C device. Note that atm, inconsistently, the parent of the I2C device is initially set to the DRM kdev and after a Connection Status Notification the parent may be reset to be the connector's kdev. This problem is addressed by the next patch. [ 4462.989299] ------------[ cut here ]------------ [ 4463.014940] sysfs group 'power' not found for kobject 'i2c-24' [ 4463.034664] WARNING: CPU: 0 PID: 970 at fs/sysfs/group.c:281 sysfs_remove_group+0x71/0x80 [ 4463.044357] Modules linked in: snd_hda_intel i915 drm_kms_helper(O) drm netconsole snd_hda_codec_hdmi mei_hdcp x86_pkg_temp_thermal coretemp crct10dif_pclmul snd_intel_dspcf g crc32_pclmul snd_hda_codec snd_hwdep ghash_clmulni_intel snd_hda_core asix usbnet kvm_intel mii i2c_algo_bit snd_pcm syscopyarea sysfillrect e1000e sysimgblt fb_sys_fops prim e_numbers ptp pps_core i2c_i801 r8169 mei_me realtek mei [last unloaded: drm] [ 4463.044399] CPU: 0 PID: 970 Comm: kworker/0:2 Tainted: G O 5.7.0+ #172 [ 4463.044402] Hardware name: Intel Corporation Tiger Lake Client Platform/TigerLake U DDR4 SODIMM RVP [ 4463.044423] Workqueue: events drm_dp_delayed_destroy_work [drm_kms_helper] [ 4463.044428] RIP: 0010:sysfs_remove_group+0x71/0x80 [ 4463.044431] Code: 48 89 df 5b 5d 41 5c e9 cd b6 ff ff 48 89 df e8 95 b4 ff ff eb cb 49 8b 14 24 48 8b 75 00 48 c7 c7 20 0f 3f 82 e8 9f c5 d7 ff <0f> 0b 5b 5d 41 5c c3 0f 1f 84 00 00 00 00 00 48 85 f6 74 31 41 54 [ 4463.044433] RSP: 0018:ffffc900018bfbf0 EFLAGS: 00010282 [ 4463.044436] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000001 [ 4463.044439] RDX: 0000000080000001 RSI: ffff88849e828f38 RDI: 00000000ffffffff [ 4463.052970] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:100:plane 2B] 00000000c2160caa state to 00000000d172564a [ 4463.070533] RBP: ffffffff820cea20 R08: ffff88847f4b8958 R09: 0000000000000000 [ 4463.070535] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88848a725018 [ 4463.070537] R13: 0000000000000000 R14: ffffffff827090e0 R15: 0000000000000002 [ 4463.070539] FS: 0000000000000000(0000) GS:ffff88849e800000(0000) knlGS:0000000000000000 [ 4463.070541] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4463.070543] CR2: 00007fdf8a756538 CR3: 0000000489684001 CR4: 0000000000760ef0 [ 4463.070545] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4463.070547] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 4463.070549] PKRU: 55555554 [ 4463.070551] Call Trace: [ 4463.070560] device_del+0x84/0x400 [ 4463.070571] cdev_device_del+0x10/0x30 [ 4463.070578] put_i2c_dev+0x69/0x80 [ 4463.070584] i2cdev_detach_adapter+0x2e/0x60 [ 4463.070591] notifier_call_chain+0x34/0x90 [ 4463.070599] blocking_notifier_call_chain+0x3f/0x60 [ 4463.070606] device_del+0x7c/0x400 [ 4463.087817] ? lockdep_init_map_waits+0x57/0x210 [ 4463.087825] device_unregister+0x11/0x60 [ 4463.087829] i2c_del_adapter+0x249/0x310 [ 4463.087846] drm_dp_port_set_pdt+0x6b/0x2c0 [drm_kms_helper] [ 4463.087862] drm_dp_delayed_destroy_work+0x2af/0x350 [drm_kms_helper] [ 4463.087876] process_one_work+0x268/0x600 [ 4463.105438] ? __schedule+0x30c/0x920 [ 4463.105451] worker_thread+0x37/0x380 [ 4463.105457] ? process_one_work+0x600/0x600 [ 4463.105462] kthread+0x140/0x160 [ 4463.105466] ? kthread_park+0x80/0x80 [ 4463.105474] ret_from_fork+0x24/0x50 Cc: <stable@vger.kernel.org> Signed-off-by:
-
Imre Deak authored
Some TypeC -> native DP adapters, at least the Club 3D CAC-1557 adapter, incorrectly filter out HPD short pulses with a duration less than ~540 usec, leading to MST probe failures. According to the DP Standard 2.0 section 5.1.4: - DP sinks should generate short pulses in the 500 usec -> 1 msec range - DP sources should detect short pulses in the 250 usec -> 2 msec range According to the DP Alt Mode on TypeC Standard section 3.9.2, adapters should detect and forward short pulses according to how sources should detect them as specified in the DP Standard (250 usec -> 2 msec). Based on the above filtering out short pulses with a duration less than 540 usec is incorrect. To make such adapters work add support for a driver polling on MST inerrupt flags, and wire this up in the i915 driver. The sink can clear an interrupt it raised after 110 msec if the source doesn't respond, so use a 50 msec poll period to avoid missing an interrupt. Polling of the MST interrupt flags is explicitly allowed by the DP Standard. This fixes MST probe failures I saw using this adapter and a DELL U2515H monitor. v2: - Fix the wait event timeout for the no-poll case. v3 (Ville): - Fix the short pulse duration limits in the commit log prescribed by the DP Standard. - Add code comment explaining why/how polling is used. - Factor out a helper to schedule the port's hpd irq handler and move it to the rest of hotplug handlers. - Document the new MST callback. - s/update_hpd_irq_state/poll_hpd_irq/ Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Imre Deak authored
Make the locking look symmetric with the unlocking. Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Reviewed-by:
-
Thomas Zimmermann authored
The mgag200 driver now uses managed functions for DRM devices. The individual helpers for modesetting and memory managed are already covered, so only device allocation and initialization is left for conversion. Signed-off-by:
-
Thomas Zimmermann authored
Following current best practice, the instance of struct drm_device is now embedded in struct mga_device. The respective field has been renamed from 'dev' to 'base' to reflect the relationship. Conversion from DRM device is done via upcast. Using dev_private is no longer possible. The patch also open-codes drm_dev_alloc() and DRM device initialization is now performed by a call to drm_device_init(). Signed-off-by:
-
Thomas Zimmermann authored
Instances of struct drm_device and struct mga_device are now allocated next to each other in mgag200_driver_load(). Yet another preparation before embedding the DRM device instance in struct mga_device. Signed-off-by:
-
Thomas Zimmermann authored
Embedding the DRM device instance in struct mga_device will require changes to device allocation. Moving the device initialization into its own functions gets it out of the way. Signed-off-by:
-
Thomas Zimmermann authored
Moving the initializer and cleanup functions for device instances to mgag200_drv.c prepares for the conversion to managed code. No functional changes are made. Remove mgag200_main.c, which is now empty. Signed-off-by:
-
Thomas Zimmermann authored
The naming of symbols in mgag200_drv.c is inconsistent. Fix that by prefixing all names with mgag200_. v2: * clarify commit message Signed-off-by:
-
Thomas Zimmermann authored
Moving the DRM driver structures from the middle of the PCI code to the top of the file makes it more readable. Also remove an obsolete comment. Signed-off-by:
-
Thomas Zimmermann authored
The memory-management code now cleans up automatically as part of device destruction. Signed-off-by:
-
Thomas Zimmermann authored
The VRAM setup in mgag200_drv.c is part of memory management and should be done in the same place. Merge the code into the memory management's init function. Signed-off-by:
-
Thomas Zimmermann authored
The MM setup code on mgag200 reads PCI BAR 0's start and length several times. Reusing these values makes the code more readable. Signed-off-by:
-
Thomas Zimmermann authored
The mgag200 driver does not use TTM any longer. Rename the related file to mgag200_mm.c (as in 'memory management'). Signed-off-by:
-
Thomas Zimmermann authored
Using the managed function simplifies the error handling. After unloading the driver, the PCI device should now get disabled as well. Signed-off-by:
-
Thomas Zimmermann authored
Support for HW cursors got remove by commit 5a77e2bf ("drm/mgag200: Remove HW cursor") Apparently the source file was not deleted. Removed it now. Signed-off-by:
-
Thomas Zimmermann authored
Commit 94668ac7 ("drm/mgag200: Convert mgag200 driver to VRAM MM") removed the implementation of mgag200_mmap(). Also remove the declaration. Signed-off-by:
-
- 10 Jun, 2020 14 commits
-
-
Kieran Bingham authored
The word 'descriptor' is misspelled throughout the tree. Fix it up accordingly: decriptors -> descriptors Signed-off-by:Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Maxime Ripard authored
The HACT_ACT field only needs to be written to when using a DSI display. Let's move that setup to our DSI branch to clear a bit the common path. Reviewed-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/7a93436f97666a2aa025686ef3ff3606de4bec67.1590594512.git-series.maxime@cerno.tech
-
Maxime Ripard authored
The hvs_latency_pix variable doesn't need to be a variable and can just be defined. Reviewed-by:
-
Maxime Ripard authored
We'll need to access the crtc_state from outside of vc4_crtc.c, so let's move it to vc4_drv.h Reviewed-by:
-
Maxime Ripard authored
of_device_get_match_data allow to simplify a bit the retrieval of the data associated to the pixelvalve compatible. Let's use it. Reviewed-by:
-
Maxime Ripard authored
Since we're going to introduce pixelvalve data structures for other SoCs than the BCM2835, let's rename the structures defined in the code to make it obvious which SoC we're targeting. Reviewed-by:
-
Maxime Ripard authored
So far the plane creation was done when each CRTC was bound, and those planes were only tied to the CRTC that was registering them. This causes two main issues: - The planes in the vc4 hardware are actually not tied to any CRTC, but can be used with every combination - More importantly, so far, we allocate 10 planes per CRTC, with 3 CRTCs. However, the next generation of hardware will have 5 CRTCs, putting us well above the maximum of 32 planes currently allowed by DRM. This patch is the first one in a series of patches that will take down both of these issues so that we can support the next generation of hardware while keeping a good amount of planes. We start by changing the way the planes are registered to first registering the primary planes for each CRTC in the CRTC bind function as we used to, but moving the overlay and cursor creation to the main driver bind function, after all the CRTCs have been bound, and make the planes associated to all CRTCs. This will slightly change the ID order of the planes, since the primary planes of all CRTCs will be first, and then a pattern of 8 overlays, 1 cursor plane for each CRTC. This shouldn't cause any trouble since the ordering between the planes is preserved though. Reviewed-by: -
Maxime Ripard authored
The planes so far were created as part of the CRTC binding code with each planes created associated only to one CRTC. However, the hardware in the vc4 doesn't really have such constraint and can be used with any CRTC. In order to rework this, let's first move the overlay and cursor planes creation to a function of its own. Reviewed-by:
-
Maxime Ripard authored
vc4_drv.h doesn't have any include guards which prevents it from being included twice. Let's add them. Reviewed-by:
-
Maxime Ripard authored
While the device tree and the driver expected a clock-names property, it wasn't explicitly documented in the previous binding. The documented order was wrong too, so make sure clock-names is there and in the proper order. Cc: devicetree@vger.kernel.org Reviewed-by:
Rob Herring <robh+dt@kernel.org> Signed-off-by:
-
Maxime Ripard authored
While the device tree and the driver expected a clock-names and a clock-cells properties, it wasn't explicitly documented in the previous binding. Make sure it is now. Cc: devicetree@vger.kernel.org Reviewed-by:
-
Maxime Ripard authored
While the device tree and the driver expected a clock-names property, it wasn't explicitly documented in the previous binding. Make sure it is now. Cc: devicetree@vger.kernel.org Reviewed-by:
-
Maxime Ripard authored
The BCM283x SoCs have a display pipeline composed of several controllers with device tree bindings that are supported by Linux. Now that we have the DT validation in place, let's split into separate files and convert the device tree bindings for those controllers to schemas. This is just a 1:1 conversion though, and some bindings were incomplete so it results in example validation warnings that are going to be addressed in the following patches. Acked-by:
-
Thomas Zimmermann authored
The udl driver contains an implementation of GEM vmap and mmap operations that is identical to the common SHMEM helper; except that udl's code uses cached pages by default. Convert udl to regular SHMEM helper functions. There's no reason to have udl behave differently from all other SHMEM drivers. The udl driver uses the SHMEM helper to enable caching. v3: * rebased onto Daniel's shmem untangle series v2: * implement .gem_create_object with SHMEM helper Signed-off-by:
-
