- 21 May, 2017 3 commits
-
-
Franziska Naepelt authored
The register mapping for the IIO driver for the Liteon Light and Proximity sensor LTR501 interrupt mode is interchanged (ALS/PS). There is a register called INTERRUPT register (address 0x8F) Bit 0 represents PS measurement trigger. Bit 1 represents ALS measurement trigger. This two bit fields are interchanged within the driver. see datasheet page 24: http://optoelectronics.liteon.com/upload/download/DS86-2012-0006/S_110_LTR-501ALS-01_PrelimDS_ver1%5B1%5D.pdfSigned-off-by:
Franziska Naepelt <franziska.naepelt@idt.com> Fixes: 7ac702b3 ("iio: ltr501: Add interrupt support") Acked-by:
Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Raveendra Padasalagi authored
The third argument of devm_request_threaded_irq() is the primary handler. It is called in hardirq context and checks whether the interrupt is relevant to the device. If the primary handler returns IRQ_WAKE_THREAD, the secondary handler (a.k.a. handler thread) is scheduled to run in process context. bcm_iproc_adc.c uses the secondary handler as the primary one and the other way around. So this patch fixes the same, along with re-naming the secondary handler and primary handler names properly. Tested on the BCM9583XX iProc SoC based boards. Fixes: 4324c97e ("iio: Add driver for Broadcom iproc-static-adc") Reported-by:
Pavel Roskin <plroskin@gmail.com> Signed-off-by:
Raveendra Padasalagi <raveendra.padasalagi@broadcom.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Marcin Niestroj authored
In case oldtrig == trig == NULL (which happens when we set none trigger, when there is already none set) there is a NULL pointer dereference during iio_trigger_put(trig). Below is kernel output when this occurs: [ 26.741790] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 26.750179] pgd = cacc0000 [ 26.752936] [00000000] *pgd=8adc6835, *pte=00000000, *ppte=00000000 [ 26.759531] Internal error: Oops: 17 [#1] SMP ARM [ 26.764261] Modules linked in: usb_f_ncm u_ether usb_f_acm u_serial usb_f_fs libcomposite configfs evbug [ 26.773844] CPU: 0 PID: 152 Comm: synchro Not tainted 4.12.0-rc1 #2 [ 26.780128] Hardware name: Freescale i.MX6 Ultralite (Device Tree) [ 26.786329] task: cb1de200 task.stack: cac92000 [ 26.790892] PC is at iio_trigger_write_current+0x188/0x1f4 [ 26.796403] LR is at lock_release+0xf8/0x20c [ 26.800696] pc : [<c0736f34>] lr : [<c016efb0>] psr: 600d0013 [ 26.800696] sp : cac93e30 ip : cac93db0 fp : cac93e5c [ 26.812193] r10: c0e64fe8 r9 : 00000000 r8 : 00000001 [ 26.817436] r7 : cb190810 r6 : 00000010 r5 : 00000001 r4 : 00000000 [ 26.823982] r3 : 00000000 r2 : 00000000 r1 : cb1de200 r0 : 00000000 [ 26.830528] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 26.837683] Control: 10c5387d Table: 8acc006a DAC: 00000051 [ 26.843448] Process synchro (pid: 152, stack limit = 0xcac92210) [ 26.849475] Stack: (0xcac93e30 to 0xcac94000) [ 26.853857] 3e20: 00000001 c0736dac c054033c cae6b680 [ 26.862060] 3e40: cae6b680 00000000 00000001 cb3f8610 cac93e74 cac93e60 c054035c c0736db8 [ 26.870264] 3e60: 00000001 c054033c cac93e94 cac93e78 c029bf34 c0540348 00000000 00000000 [ 26.878469] 3e80: cb3f8600 cae6b680 cac93ed4 cac93e98 c029b320 c029bef0 00000000 00000000 [ 26.886672] 3ea0: 00000000 cac93f78 cb2d41fc caed3280 c029b214 cac93f78 00000001 000e20f8 [ 26.894874] 3ec0: 00000001 00000000 cac93f44 cac93ed8 c0221dcc c029b220 c0e1ca39 cb2d41fc [ 26.903079] 3ee0: cac93f04 cac93ef0 c0183ef0 c0183ab0 cb2d41fc 00000000 cac93f44 cac93f08 [ 26.911282] 3f00: c0225eec c0183ebc 00000001 00000000 c0223728 00000000 c0245454 00000001 [ 26.919485] 3f20: 00000001 caed3280 000e20f8 cac93f78 000e20f8 00000001 cac93f74 cac93f48 [ 26.927690] 3f40: c0223680 c0221da4 c0246520 c0245460 caed3283 caed3280 00000000 00000000 [ 26.935893] 3f60: 000e20f8 00000001 cac93fa4 cac93f78 c0224520 c02235e4 00000000 00000000 [ 26.944096] 3f80: 00000001 000e20f8 00000001 00000004 c0107f84 cac92000 00000000 cac93fa8 [ 26.952299] 3fa0: c0107de0 c02244e8 00000001 000e20f8 0000000e 000e20f8 00000001 fbad2484 [ 26.960502] 3fc0: 00000001 000e20f8 00000001 00000004 beb6b698 00064260 0006421c beb6b4b4 [ 26.968705] 3fe0: 00000000 beb6b450 b6f219a0 b6e2f268 800d0010 0000000e cac93ff4 cac93ffc [ 26.976896] Backtrace: [ 26.979388] [<c0736dac>] (iio_trigger_write_current) from [<c054035c>] (dev_attr_store+0x20/0x2c) [ 26.988289] r10:cb3f8610 r9:00000001 r8:00000000 r7:cae6b680 r6:cae6b680 r5:c054033c [ 26.996138] r4:c0736dac r3:00000001 [ 26.999747] [<c054033c>] (dev_attr_store) from [<c029bf34>] (sysfs_kf_write+0x50/0x54) [ 27.007686] r5:c054033c r4:00000001 [ 27.011290] [<c029bee4>] (sysfs_kf_write) from [<c029b320>] (kernfs_fop_write+0x10c/0x224) [ 27.019579] r7:cae6b680 r6:cb3f8600 r5:00000000 r4:00000000 [ 27.025271] [<c029b214>] (kernfs_fop_write) from [<c0221dcc>] (__vfs_write+0x34/0x120) [ 27.033214] r10:00000000 r9:00000001 r8:000e20f8 r7:00000001 r6:cac93f78 r5:c029b214 [ 27.041059] r4:caed3280 [ 27.043622] [<c0221d98>] (__vfs_write) from [<c0223680>] (vfs_write+0xa8/0x170) [ 27.050959] r9:00000001 r8:000e20f8 r7:cac93f78 r6:000e20f8 r5:caed3280 r4:00000001 [ 27.058731] [<c02235d8>] (vfs_write) from [<c0224520>] (SyS_write+0x44/0x98) [ 27.065806] r9:00000001 r8:000e20f8 r7:00000000 r6:00000000 r5:caed3280 r4:caed3283 [ 27.073582] [<c02244dc>] (SyS_write) from [<c0107de0>] (ret_fast_syscall+0x0/0x1c) [ 27.081179] r9:cac92000 r8:c0107f84 r7:00000004 r6:00000001 r5:000e20f8 r4:00000001 [ 27.088947] Code: 1a000009 e1a04009 e3a06010 e1a05008 (e5943000) [ 27.095244] ---[ end trace 06d1dab86d6e6bab ]--- To fix that problem call iio_trigger_put(trig) only when trig is not NULL. Fixes: d5d24bcc ("iio: trigger: close race condition in acquiring trigger reference") Signed-off-by:
Marcin Niestroj <m.niestroj@grinn-global.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
-
- 14 May, 2017 2 commits
-
-
Jacopo Mondi authored
The power and current "shunt-resistor" attribute's 'show' function displays the resistor value in milli-Ohms, while the ABI description specifies it should be displayed in Ohms. Fix it. Reported-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Tested-by:
-
Dan Carpenter authored
We should be allocating enough information for a tiadc_device struct which is about 400 bytes but instead we allocate enough for a second iio_dev struct which is over 2000 bytes. Fixes: fea89e2d ("iio: adc: ti_am335x_adc: use variable names for sizeof() operator") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
- 07 May, 2017 3 commits
-
-
Eduardo Molinas authored
If the driver is built as a module, it won't be autloaded if the devices are registered via OF code because the OF device table entries are not exported as aliases Before the patch: $ modinfo drivers/iio/adc/sun4i-gpadc-iio.ko | grep alias alias: platform:sun6i-a31-gpadc-iio alias: platform:sun5i-a13-gpadc-iio alias: platform:sun4i-a10-gpadc-iio After the patch: $ modinfo drivers/iio/adc/sun4i-gpadc-iio.ko | grep alias alias: of:N*T*Callwinner,sun8i-a33-thsC* alias: of:N*T*Callwinner,sun8i-a33-ths alias: platform:sun6i-a31-gpadc-iio alias: platform:sun5i-a13-gpadc-iio alias: platform:sun4i-a10-gpadc-iio Signed-off-by:
Eduardo Molinas <edu.molinas@gmail.com> Signed-off-by:
-
Eduardo Molinas authored
If the driver is built as a module, it won't be autloaded if the devices are registered via PLATFORM code because the PLATFORM device table entries are not exported as aliases Before the patch: $ modinfo drivers/iio/adc/sun4i-gpadc-iio.ko | grep alias $ After the patch: $ modinfo drivers/iio/adc/sun4i-gpadc-iio.ko | grep alias alias: platform:sun6i-a31-gpadc-iio alias: platform:sun5i-a13-gpadc-iio alias: platform:sun4i-a10-gpadc-iio Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Matt Ranostay authored
Using iio_trigger_poll() can oops when multiple interrupts happen before the first is handled. Use iio_trigger_poll_chained() instead and use the timestamp when processed, since it will be in theory be 2 ms max latency. Fixes: 24ddb0e4 ("iio: Add AS3935 lightning sensor support") Cc: stable@vger.kernel.org Signed-off-by:
Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by:
-
- 27 Apr, 2017 1 commit
-
-
Matt Ranostay authored
AS3935 interrupt mask has been incorrect so valid lightning events would never trigger an buffer event. Also noise interrupt should be BIT(0). Fixes: 24ddb0e4 ("iio: Add AS3935 lightning sensor support") CC: stable@vger.kernel.org Signed-off-by:
-
- 26 Apr, 2017 2 commits
-
-
Dan Carpenter authored
devm_iio_device_alloc() doesn't return ERR_PTRs, it returns NULLs. Fixes: 69780a3b ("iio: adc: Add Maxim max9611 ADC driver") Signed-off-by:
-
Matt Ranostay authored
According to the datasheet the RCO must be recalibrated on every power-on-reset. Also remove mutex locking in the calibration function since callers other than the probe function (which doesn't need it) will have a lock. Fixes: 24ddb0e4 ("iio: Add AS3935 lightning sensor support") Cc: George McCollister <george.mccollister@gmail.com> Signed-off-by:
-
- 18 Apr, 2017 29 commits
-
-
Laura Abbott authored
Most of the items have been taken care of by a clean up series. Remove the completed items and add a few new ones. Signed-off-by:
Laura Abbott <labbott@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Laura Abbott authored
This never got set in the ioctl. Properly set a return value of 0 on success. Signed-off-by:
-
Laura Abbott authored
ion_handle was introduced as an abstraction to represent a reference to a buffer via an ion_client. As frameworks outside of Ion evolved, the dmabuf emerged as the preferred standard for use in the kernel. This has made the ion_handle an unnecessary abstraction and prone to race conditions. ion_client is also now only used internally. We have enough mechanisms for race conditions and leaks already so just drop ion_handle and ion_client. This also includes ripping out most of the debugfs infrastructure since much of that was tied to clients and handles. The debugfs infrastructure was prone to give confusing data (orphaned allocations) so it can be replaced with something better if people actually want it. Signed-off-by:
-
Laura Abbott authored
Nobody uses this interface externally. Drop it. Signed-off-by:
-
Laura Abbott authored
The current model of Ion heap registration is based on the outdated model of board files. The replacement for board files (devicetree) isn't a good replacement for what Ion wants to do. In actuality, Ion wants to show what memory is available in the system for something else to figure out what to use. Switch to a model where Ion creates its device unconditionally and heaps are registed as available regions. Currently, only system and CMA heaps are converted over to the new model. Carveout and chunk heaps can be converted over when someone wants to figure out how. Signed-off-by:
-
Laura Abbott authored
Ion current has ion_priv.h and ion.h as header files. ion.h was intended to be used for public APIs but Ion never ended up really having anything public. Combine the two headers so there is only one internal header. Signed-off-by:
-
Laura Abbott authored
Once upon a time, phys_addr_t was not everywhere in the kernel. These days it is used enough places that having a separate Ion type doesn't make sense. Remove the extra type and just use phys_addr_t directly. Signed-off-by:
-
Laura Abbott authored
Several of the Ion ioctls were designed in such a way that they necessitate compat ioctls. We're breaking a bunch of other ABIs and cleaning stuff up anyway so let's follow the ioctl guidelines and clean things up while everyone is busy converting things over anyway. As part of this, also remove the useless alignment field from the allocation structure. Signed-off-by:
-
Laura Abbott authored
Now that we have proper caching, stop setting the DMA address manually. It should be set after properly calling dma_map. Signed-off-by:
-
Laura Abbott authored
When CMA was first introduced, its primary use was for DMA allocation and the only way to get CMA memory was to call dma_alloc_coherent. This put Ion in an awkward position since there was no device structure readily available and setting one up messed up the coherency model. These days, CMA can be allocated directly from the APIs. Switch to using this model to avoid needing a dummy device. This also mitigates some of the caching problems (e.g. dma_alloc_coherent only returning uncached memory). Signed-off-by:
-
Laura Abbott authored
Frameworks (e.g. Ion) may want to iterate over each possible CMA area to allow for enumeration. Introduce a function to allow a callback. Signed-off-by:
-
Laura Abbott authored
Frameworks that may want to enumerate CMA heaps (e.g. Ion) will find it useful to have an explicit name attached to each region. Store the name in each CMA structure. Signed-off-by:
-
Greg Kroah-Hartman authored
Merge tag 'iio-fixes-for-4.11e' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Fifth set of IIO fixes for the 4.11 cycle. As these are rather late in the cycle, they may sneak over into 4.12. There is a fix for a regression caused by another fix (hid sensors hardware seems to vary a lot in how various corner cases are handled). * ad7303 - fix channel description. Numeric values were being passed as characters presumably leading to garbage from the userspace interface. * as3935 - the write data macro was wrong so fix it. * bmp280 - incorrect handling of negative values as being unsigned broke humidity calculation. * hid-sensor - Restore the poll and hysteresis values after resume as some hardware doesn't do it. * stm32-trigger - buglet in reading the sampling frequency
-
Greg Kroah-Hartman authored
Merge tag 'iio-for-4.12d' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Fourth set of IIO new device support, features and cleanups for the 4.12 cycle New device support * max1117, 1118 and 1119 - new ADC driver * max9611 - new ADC driver * pm8xxx hk/xoadc - new driver with some shared features broken out from the SPMI vadc. * sun4i-gpadc - A33 thermal sensor support (with associated rework) * stm32-dac - new driver and bindings * stm32 trigger - enable support of quadrature encoder device and counter modes Features * apds9960 - use the runtime pm for normal suspend * stm32-adc - add opition to sest resolution via devicetree * xoadc - augment DT bindings to deal with some weird mux cases Cleanups * ad5933 - protect direct mode using claim and release helpers * ade7759 - S_IRUGO and friends to octal in two goes * adis16203 - drop unnecessary brackets * hid-sensor - fix unbalanced pm_runtieme_enable error when probing after remove * lsm6dsx - use actual part numbers for device name when known - simplify data read pin parsing * mpu3050 - avoid double reporting errors
-
Martin Karamihov authored
This patch fixes the following sparse warning: ieee80211_tx.c:174:36: incorrect type in assignment (different base types) ieee80211_tx.c:174:36: expected unsigned short [unsigned] [short] [usertype] <noident> ieee80211_tx.c:174:36: got restricted __be16 [usertype] <noident> by adding left side cast to __be16. Signed-off-by:
Martin Karamihov <martinowar@gmail.com> Signed-off-by:
-
Aishwarya Pant authored
Changed the type of wpa_ie_len from (int *) to (unsigned int *) in the function rtw_get_wpa_ie(..) to suppress signedness mismatch warnings in rtw_generate_ie of the type- drivers/staging/rtl8188eu//core/rtw_ieee80211.c:1009:60: warning: incorrect type in argument 2 (different signedness) drivers/staging/rtl8188eu//core/rtw_ieee80211.c:1009:60: expected int *wpa_ie_len drivers/staging/rtl8188eu//core/rtw_ieee80211.c:1009:60: got unsigned int *<noident> Signed-off-by:
Aishwarya Pant <aishpant@gmail.com> Signed-off-by:
-
Aishwarya Pant authored
Changed the type of sz from (int) to (unsigned int) to suppress signedness mismatch warnings of the type- drivers/staging/rtl8188eu//core/rtw_ieee80211.c:258:97: warning: incorrect type in argument 5 (different signedness) drivers/staging/rtl8188eu//core/rtw_ieee80211.c:258:97: expected unsigned int [usertype] *frlen drivers/staging/rtl8188eu//core/rtw_ieee80211.c:258:97: got int *<noident> Signed-off-by:
-
Aishwarya Pant authored
Changed the type of len from (int *) to (unsigned int *) in the function rtw_get_ie(..) and wherever this function is called to suppress signedness mismatch warnings of the type- drivers/staging/rtl8188eu//core/rtw_ap.c:78:60: warning: incorrect type in argument 3 (different signedness) drivers/staging/rtl8188eu//core/rtw_ap.c:78:60: expected int *len drivers/staging/rtl8188eu//core/rtw_ap.c:78:60: got unsigned int *<noident> Signed-off-by:
-
Colin Ian King authored
The two different paths for an if statement are identical and hence we can just replace it with the single statement. Detected by CoverityScan, CID#1428443 ("Identical code for different branches") Signed-off-by:Colin Ian King <colin.king@canonical.com> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Colin Ian King authored
The comparison of mode >= 0 is redundant as mode is a u32 and this is always true. Remove this redundant code. Detected with CoverityScan ("Unsigned compared against 0") Signed-off-by: -
Kevin Wern authored
Gstreamer's v4l2src reacted poorly to certain outputs from the bcm2835 video driver's ioctl ops function vidioc_enum_framesizes, so a workaround was created that could be activated by user input. This workaround would replace the driver's ioctl ops struct with another, similar struct--only with no function pointed to by vidioc_enum_framesizes. With no response, gstreamer would attempt to continue with some default settings that happened to work better. However, this bug has been fixed in gstreamer since 2014, so we shouldn't include this workaround in the stable version of the driver. Signed-off-by:
Kevin Wern <kevin.m.wern@gmail.com> Signed-off-by:
-
Tobin C. Harding authored
Checkpatch emits WARNING: quoted string split across lines. Concatenate string onto single line. Signed-off-by:
Tobin C. Harding <me@tobin.cc> Signed-off-by:
-
Tobin C. Harding authored
Driver SDIO code uses helper functions to do IO to the SDIO device. Current helpers handle IO of a single byte as well as multi-byte. Driver predominately uses single byte IO. If the common case is made simple it simplifies the whole driver. The common case can be made simple by splitting the multi-byte and single byte calls into separate functions, i.e 4 functions in total, read single byte, read multi-byte, write single byte, write multi-byte. Also, we need to handle the debug code. Currently debug calls after read/write fail access the IO buffer. This buffer, at best, does not hold useful data on the error path, at worst is uninitialized and holds garbage. Split read/write helper functions into two functions each, one for single byte IO and one for multi-byte IO. Fix all call sites. Do not change the program logic. Signed-off-by:
-
Tobin C. Harding authored
Checkpatch emits CHECK: Please don't use multiple blank lines. Remove multiple blank lines. Signed-off-by:
-
Tobin C. Harding authored
Checkpatch emits WARNING: please, no space before tabs. Remove space before tabs. Signed-off-by:
-
Tobin C. Harding authored
goto label includes 'err_' suffix but is executed on non-error paths. Remove err_ suffix from goto label. Signed-off-by:
-
Tobin C. Harding authored
SDIO code currently has a number of unneeded comments. Following kernel coding style we do not need extraneous comments, especially on code where it is clear what is being done. Spelling typos can be fixed. Remove unnecessary comments, fix typos in comments. Signed-off-by:
-
Tobin C. Harding authored
ks_sdio_card structure description does not have a kernel doc format comment. Add kernel doc format comment to struct ks_sdio_card. Signed-off-by:
-
Tobin C. Harding authored
Currently driver uses a hardware information struct description to group some SDIO related functionality (work, work queue, sdio private data pointer). This structure is then embedded in the device private data structure. Having nested structures described in different header files means that to view the device private data programmers must open two header files. This structure could be embedded anonymously in the device private data and achieve the same result (grouping of function specific to SDIO) without the need to open multiple headers. However, the SDIO private data structure already has various different data and pointers, adding the embedded structure adds little extra meaning and lengthens all the dereferences throughout the driver, often meaning addition line breaks and braces. We can increase readability and reduce code complexity by moving the hardware information data and pointers to directly be within the device private data structure description. While preparing for this refactoring it was noted that the identifier currently used for the delayed work is 'rw_wq', this is confusing since the 'wq' suffix typically means 'work queue'. This identifier would be more meaningful if it used the suffix 'dwork' as does the declaration of queue_delayed_work() (include/linux/workqueue.h). The identifier for the work queue is currently 'ks7010sdio_wq'. This identifier can be shortened without loss of meaning because there is only one work queue within the driver. Identifier 'wq' is typical within in-tree driver code and aptly describes the pointer. Current pointer to the SDIO private data is identified by 'sdio_card', this is sufficiently meaningful from within the hw_info structure but once the hw_info_t structure is removed the pointer would be better to have a prefix appended to it to retain the prior level of meaning. Move members from struct hw_info_t to struct ks_wlan_private. Rename identifiers; struct delayed_work pointer 'rw_wq' to 'rw_dwork'. struct workqueue_struct pointer 'ks7010sdio_wq' to 'wq'. struct ks_sdio_card pointer 'sdio_card' to 'ks_sdio_card'. Remove structure description hw_info_t. Fix init/destroy calls. Fix all call sites, SDIO private data access calls, and queuing calls. Signed-off-by:
-
