This patch adds DMA support for Freescale i.MX27 SoCs. It is derived
from the i.MX1 port and should (though currently untested) still be
working for the i.MX1.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This patch adds GPIO multiplexing support for the imx1/mxc2
family of procesors.
Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>

This patch adds timer support for the i.MX machine family. This code can
be used on the following machs:

 - i.MX1 (tested)
 - i.MX2 (i.MX21 (to be tested), i.MX27 (tested))
 - i.MX3 (i.MX31 (tested))

TODO: It seems impossible to build a kernel for more than one CPU because the
timer do not follow the platform device rules. So it does only work if
timer 1 can be accessed on all CPUs at the same address.
Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This patch bases on the one from Daniel Mack. The most important change to
Daniel's patch is to be more generic. This gpio routine supports at least
the i.MX27 and i.MX31 processors.
Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
Acked-by: Daniel Mack <daniel@caiaq.de>

Internal clock path handling for the mxc CPUs.

Changed against the original Freescale code (and against clocklib for example):
 - clock rate is always calculated whenever one ask for the current rate
   (means struct clk has no more a member called "rate"). So switching the PLL
   base frequency will propagate immediately to all other clocks that are
   depending on this frequency.
Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>

From: Juergen Beisert <j.beisert@pengutronix.de>

This patch cleans up the in-kernel platform code from doxygen comments.
We don't know how this could have leak in, but anyway.

Changes since last release:
 - none
Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
Signed-off-by: Ross Wille <wille@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

This patch adds the foundation pieces for
the Freescale MXC platforms, including
i.MX2 and i.MX3 based systems.

The bare-bones MX31 support in this patch
boots to the rootdev panic with 8250 serial
console configured "console=ttyS0,115200".
It assumes that Redboot is the boot loader.
Signed-off-by: Quinn Jensen <quinn.jensen@freescale.com>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>