Counting number of touching fingers by wacom_wac_finger_count_touches so we
don't have to count them inside individual routines.
Signed-off-by: Ping Cheng <pingc@wacom.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The quirk was added for devices that support both pen and touch.  It decides if
a device supports multiple inputs by hardcoded feature type. However, for some
devices, we do not know if they support both before accessing their HID
descriptors.

This patch relies on dynamically assigned device_type to make the decision.
Also, we make it certain that wacom_wac->shared is always created. That is, the
driver will not be loaded if it fails to create wacom_wac->shared.
Signed-off-by: Ping Cheng <pingc@wacom.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Conflicts:
	drivers/hid/wacom_wac.c

Need to fetch the 4.0 fixes to apply 4.1 patches based on top
of those.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This mouse is also known under other IDs. It needs the quirk or will disconnect
in runlevel 1 or 3.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
CC: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This mouse needs QUIRK_ALWAYS_POLL.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
CC: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

486b908d (HID: wacom: do not send pen events before touch is up/forced out)
introduces a kernel oops when plugging a tablet without touch.

wacom->shared is null for these devices so this leads to a null pointer
exception.

Change the condition to make it clear that what we need is wacom->shared
not NULL.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

If noone listens to the input device when a tool comes in proximity,
the tablet does not send the in-prox event when a client becomes available.
That means that no events will be sent until the tool is taken out of
proximity.

In this situation, ask for the report WACOM_REPORT_INTUOSREAD which will
read the corresponding feature and generate an in-prox event.
To make some generation of hardware working, we need to unset the
quirk NO_GET set by hid-core because the interfaces are seen as "boot
mouse".

We don't schedule this read in a worker while we are in an IO interrupt.
We know that usbhid will do it asynchronously. If this is triggered by
uhid, then this is obviously a client side bug :)
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The linux kernel has supported the TiVo Slide remote control for some time, but
does not recognize the USB ID of the newer Slide Pro. This patch adds the
missing data structures so the newer remote will be recognized by the driver,
thereby allowing the TiVo, LiveTV, and Thumbs Up/Down buttons to be
mapped with a hwdb file.
Signed-off-by: Forest Wilkinson <web11.forest@tibit.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Declare the POWER_SUPPLY_PROP_PRESENT property to provide userspace
with a way to determine if the battery on a wireless tablet is plugged
in. Although current wireless tablets do not explicitly report this
information, it can be inferred from other state information. In
particular, a battery is assumed to be present if any of the following
are true: a non-zero battery level reported, the battery is reported as
charging, or the tablet is operating wirelessly.

Note: The last condition above may not strictly hold for the Graphire
Wireless (it charges from a DC barrel jack instead of a USB port), but I
do not know what is reported in the no-battery condition.
Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This device disconnects every 60s without X
Signed-off-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The constant is not used (leftover from previous patch versions
that never got merged).
Reported-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The status packet for tablets which can use a wireless module contains a
bit that is set if the battery is charging. This bit will be 0 if either
a battery is not present or if the battery has reached full charge. Note
that the charging circuit may continue to charge the battery for a short
time after reaching "100%".
Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Calls the wacom_status_irq function to report battery status for the
Intuos Pro and Intuos5 (in addition to the already-reporting Intuos
and last-generation Bamboo).
Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

If a wireless adapter (which contains the charging circuitry) is
detected as being attached to the tablet then create a new battery
interface and update its status as data is reported. Also destroy the
battery if the adapter goes away.
Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Tablets like the Intuos, Intuos Pro, and Bamboo have a connector for an
optional wireless module that can be connected on the fly. The presence
(or absence) of this module is indicated in a status report recieved
from the tablet. This patch adds a workqueue function that will create
or destroy a power_supply object at runtime to match the current state
of the WACOM_QUIRK_BATTERY flag.
Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Has the 'wacom_notify_battery' function take on the job of detecting if
updating the power supply is necessary to remove multiple
nearly-identical 'if' blocks.
Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

In addition to the touchswitch state for "Intuos", these packets are
also sent by the Intuos Pro, Intuos5, and last-generation Bamboo
tablets when using a wired connection. They contain, among other
things, information about the optional wireless module and battery
charge state (to be supported in subsuquent patches).
Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

touch_down is a flag to indicate if there are touches on tablet
or not. Since one set of touch events may be posted over more
than one data packet/touch frame, and pen may come in proximity
while touch events are partially sent, counting all touch events
for the set reflects the actual status of touch_down.
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

If pen comes in proximity while touch is down, we force touch up
before sending pen events. Otherwise, there can be unfinished
touch events compete with pen events. This idea has been fully
implemented for Tablet PCs. But other tablets that support both
pen and touch are not fully considered.
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The stylus of this device works just fine out of the box.
The touch is seen by default as a mouse with relative events and some
gestures.
The wireless and the wired version have slightly different firmwares, but
the debug mode 2 on the feature 2 is common to the 2 devices. In this mode,
all the reports are emitted through the debug interface (pen, raw touch
and mouse emulation), so we have to re-route manually the events.

We keep the Pen interface as a HID_GENERIC one because it works, and only
parse the raw touches while discarding the mouse emulation & gestures.

Switching the default in raw mode allows us to have a consistent user
experience accross all the multitouch touchpads (and enable the touch part
of the devices).

Note that the buttons of this devices are reported through the touch
interface. There is no 'Pad' interface. It seemed more natural to have
the BTN_LEFT and BTN_RIGHT reported with the touch because they are
placed under the touch interface and it looks like they belong to the
touch part.
Tested-by: Josep Sanchez Ferreres <josep.sanchez.ferreres@est.fib.upc.edu>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The Bamboo PAD in debug mode needs to re-route events from the debug
interface to the Pen interface. This can be easily done with
hid_input_report(), but that means that we need to keep a reference to
the various hid_devices.

There should be only one touch and one pen interface per physical tablet,
so there is no need to keep a list of hid-devices, plain pointers are
sufficient.
Tested-by: Josep Sanchez Ferreres <josep.sanchez.ferreres@est.fib.upc.edu>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Lenovo Thinkpad 10 has wacom digitizer connected as a I2C-HID device. Add
generic support for this.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Microsoft Natural Wireless Ergonomic Keyboard 7000 has special My
Favorites 1..5 keys which are handled through a vendor-defined usage
page (0xff05).

Apply MS_ERGONOMY quirks handling to USB PID 0x071d (Microsoft Microsoft
2.4GHz Transceiver V1.0) so that the My Favorites 1..5 keys are reported
as KEY_F14..18 events.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=52841Signed-off-by: Jakub Sitnicki <jsitnicki@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

d1c7e29e (HID: i2c-hid: prevent buffer overflow in early IRQ)
changed hid_get_input() to read ihid->bufsize bytes, which can be
more than wMaxInputLength. This is the case with the Dell XPS 13
9343, and it is causing events to be missed. In some cases the
missed events are releases, which can cause the cursor to jump or
freeze, among other problems. Limit the number of bytes read to
min(wMaxInputLength, ihid->bufsize) to prevent such problems.

Fixes: d1c7e29e "HID: i2c-hid: prevent buffer overflow in early IRQ"
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Per-controller spinlock needs to be properly initialized during device probe.

[jkosina@suse.cz: massage changelog]
[jkosina@suse.cz: drop hunk that has already been applied by previous
 patch]
Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

sony_dev_list_lock spinlock (which was introduced in d2d782fc ("HID: sony:
Prevent duplicate controller connections") is not being initialized properly.
Fix that.
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

input_mt_sync_frame() calls input_mt_report_pointer_emulation() and do
some internal steps required to keep in sync the state of the touch within
the various reports.

Given that we use input_mt_get_slot_by_key() in this driver, it is better to
use input_mt_sync_frame().
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

ida_destroy() must be called _after_ all the devices have been
unregistered; otherwise, when calling "rmmod hid_sony" with devices
still plugged in, the following warning would show up because of calls
to ida_simple_remove() on a destroyed ID allocator:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 5509 at lib/idr.c:1052 ida_simple_remove+0x26/0x50()
ida_remove called for id=0 which is not allocated.
Modules linked in: ...
CPU: 0 PID: 5509 Comm: rmmod Not tainted 3.19.0-rc6-ao2 #35
Hardware name: System manufacturer System Product Name/M2N-MX SE, BIOS 0501    03/20/2008
 0000000000000000 ffffffff8176320d ffffffff815b3a88 ffff880036f7fdd8
 ffffffff8106ce01 0000000000000000 ffffffffa07658e0 0000000000000246
 ffff88005077d8b8 ffff88005077d8d0 ffffffff8106ce7a ffffffff81763260
Call Trace:
 [<ffffffff815b3a88>] ? dump_stack+0x40/0x50
 [<ffffffff8106ce01>] ? warn_slowpath_common+0x81/0xb0
 [<ffffffff8106ce7a>] ? warn_slowpath_fmt+0x4a/0x50
 [<ffffffff812ccb86>] ? ida_simple_remove+0x26/0x50
 [<ffffffffa0762dc8>] ? sony_remove+0x58/0xe0 [hid_sony]
 [<ffffffffa00fff15>] ? hid_device_remove+0x65/0xd0 [hid]
 [<ffffffff8140425e>] ? __device_release_driver+0x7e/0x100
 [<ffffffff81404c70>] ? driver_detach+0xa0/0xb0
 [<ffffffff81403ee5>] ? bus_remove_driver+0x55/0xe0
 [<ffffffffa01000ff>] ? hid_unregister_driver+0x2f/0xa0 [hid]
 [<ffffffff810e45bf>] ? SyS_delete_module+0x1bf/0x270
 [<ffffffff81014089>] ? do_notify_resume+0x69/0xa0
 [<ffffffff815b952d>] ? system_call_fastpath+0x16/0x1b
---[ end trace bc794b3d22c30ede ]---
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Acked-by: Frank Praznik <frank.praznik@oh.rr.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Commit 0ccf091d ("HID: sensor-hub:
make dyn_callback_lock IRQ-safe) was supposed to change locks
in sensor_hub_get_callback(), but missed.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

During changes to the interface, some documentation field comments
were missed. Added missing comments.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Signed-off-by: Darren Salt <devspam@moreofthesa.me.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The Microsoft HID over I2C specification says two things regarding the
interrupt:

 1) The interrupt should be level sensitive
 2) The device keeps the interrupt asserted as long as it has more reports
    available.

We've seen that at least some Atmel and N-Trig panels keep the line low as
long as they have something to send. The current version of the driver only
detects the first edge but then fails to read rest of the reports (as the
line is still asserted).

Make the driver follow the specification and configure the HID interrupt to
be level sensitive.

The Windows HID over I2C driver also seems to do the same.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

27QHD has the same x_min/y_min (WACOM_CINTIQ_OFFSET) as other Cintiqs.

ABS_MISC event is required for PAD packet to work properly with
xf86-input-wacom.
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull HID updates from Jiri Kosina:
 "Updates for HID code

   - improveements of Logitech HID++ procotol implementation, from
     Benjamin Tissoires

   - support for composite RMI devices, from Andrew Duggan

   - new driver for BETOP controller, from Huang Bo

   - fixup for conflicting mapping in HID core between PC-101/103/104
     and PC-102/105 keyboards from David Herrmann

   - new hardware support and fixes in Wacom driver, from Ping Cheng

   - assorted small fixes and device ID additions all over the place"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (33 commits)
  HID: wacom: add support for Cintiq 27QHD and 27QHD touch
  HID: wacom: consolidate input capability settings for pen and touch
  HID: wacom: make sure touch arbitration is applied consistently
  HID: pidff: Fix initialisation forMicrosoft Sidewinder FF Pro 2
  HID: hyperv: match wait_for_completion_timeout return type
  HID: wacom: Report ABS_MISC event for Cintiq Companion Hybrid
  HID: Use Kbuild idiom in Makefiles
  HID: do not bind to Microchip Pick16F1454
  HID: hid-lg4ff: use DEVICE_ATTR_RW macro
  HID: hid-lg4ff: fix sysfs attribute permission
  HID: wacom: peport In Range event according to the spec
  HID: wacom: process invalid Cintiq and Intuos data in wacom_intuos_inout()
  HID: rmi: Add support for the touchpad in the Razer Blade 14 laptop
  HID: rmi: Support touchpads with external buttons
  HID: rmi: Use hid_report_len to compute the size of reports
  HID: logitech-hidpp: store the name of the device in struct hidpp
  HID: microsoft: add support for Japanese Surface Type Cover 3
  HID: fixup the conflicting keyboard mappings quirk
  HID: apple: fix battery support for the 2009 ANSI wireless keyboard
  HID: fix Kconfig text
  ...

Commit 84683a7e ("sata_dwc_460ex: enable COMPILE_TEST for the
driver") enabled this driver for non-ppc460-ex platforms, but it was
then disabled for ARM and ARM64 by commit 2de5a9c0 ("sata_dwc_460ex:
disable compilation on ARM and ARM64") because it's too noisy and
broken.

This disabled is entirely, because it's too noisy on x86-64 too, and
there's no point in disabling architectures one by one.  At a minimum,
the code isn't 64-bit clean, and even on 32-bit it is questionable
whether it makes sense.

Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge misc updates from Andrew Morton:
 "Bite-sized chunks this time, to avoid the MTA ratelimiting woes.

   - fs/notify updates

   - ocfs2

   - some of MM"

That laconic "some MM" is mainly the removal of remap_file_pages(),
which is a big simplification of the VM, and which gets rid of a *lot*
of random cruft and special cases because we no longer support the
non-linear mappings that it used.

From a user interface perspective, nothing has changed, because the
remap_file_pages() syscall still exists, it's just done by emulating the
old behavior by creating a lot of individual small mappings instead of
one non-linear one.

The emulation is slower than the old "native" non-linear mappings, but
nobody really uses or cares about remap_file_pages(), and simplifying
the VM is a big advantage.

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (78 commits)
  memcg: zap memcg_slab_caches and memcg_slab_mutex
  memcg: zap memcg_name argument of memcg_create_kmem_cache
  memcg: zap __memcg_{charge,uncharge}_slab
  mm/page_alloc.c: place zone_id check before VM_BUG_ON_PAGE check
  mm: hugetlb: fix type of hugetlb_treat_as_movable variable
  mm, hugetlb: remove unnecessary lower bound on sysctl handlers"?
  mm: memory: merge shared-writable dirtying branches in do_wp_page()
  mm: memory: remove ->vm_file check on shared writable vmas
  xtensa: drop _PAGE_FILE and pte_file()-related helpers
  x86: drop _PAGE_FILE and pte_file()-related helpers
  unicore32: drop pte_file()-related helpers
  um: drop _PAGE_FILE and pte_file()-related helpers
  tile: drop pte_file()-related helpers
  sparc: drop pte_file()-related helpers
  sh: drop _PAGE_FILE and pte_file()-related helpers
  score: drop _PAGE_FILE and pte_file()-related helpers
  s390: drop pte_file()-related helpers
  parisc: drop _PAGE_FILE and pte_file()-related helpers
  openrisc: drop _PAGE_FILE and pte_file()-related helpers
  nios2: drop _PAGE_FILE and pte_file()-related helpers
  ...

Pull gfs2 updates from Steven Whitehouse:
 "This time we have mostly clean ups.  There is a bug fix for a NULL
  dereference relating to ACLs, and another which improves (but does not
  fix entirely) an allocation fall-back code path.  The other three
  patches are small clean ups"

* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw:
  GFS2: Fix crash during ACL deletion in acl max entry check in gfs2_set_acl()
  GFS2: use __vmalloc GFP_NOFS for fs-related allocations.
  GFS2: Eliminate a nonsense goto
  GFS2: fix sprintf format specifier
  GFS2: Eliminate __gfs2_glock_remove_from_lru

Pull xfs update from Dave Chinner:
 "This update contains:

   - RENAME_EXCHANGE support

   - Rework of the superblock logging infrastructure

   - Rework of the XFS_IOCTL_SETXATTR implementation
       * enables use inside user namespaces
       * fixes inconsistencies setting extent size hints

   - fixes for missing buffer type annotations used in log recovery

   - more consolidation of libxfs headers

   - preparation patches for block based PNFS support

   - miscellaneous bug fixes and cleanups"

* tag 'xfs-for-linus-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (37 commits)
  xfs: only trace buffer items if they exist
  xfs: report proper f_files in statfs if we overshoot imaxpct
  xfs: fix panic_mask documentation
  xfs: xfs_ioctl_setattr_check_projid can be static
  xfs: growfs should use synchronous transactions
  xfs: fix behaviour of XFS_IOC_FSSETXATTR on directories
  xfs: factor projid hint checking out of xfs_ioctl_setattr
  xfs: factor extsize hint checking out of xfs_ioctl_setattr
  xfs: XFS_IOCTL_SETXATTR can run in user namespaces
  xfs: kill xfs_ioctl_setattr behaviour mask
  xfs: disaggregate xfs_ioctl_setattr
  xfs: factor out xfs_ioctl_setattr transaciton preamble
  xfs: separate xflags from xfs_ioctl_setattr
  xfs: FSX_NONBLOCK is not used
  xfs: don't allocate an ioend for direct I/O completions
  xfs: change kmem_free to use generic kvfree()
  xfs: factor out a xfs_update_prealloc_flags() helper
  xfs: remove incorrect error negation in attr_multi ioctl
  xfs: set superblock buffer type correctly
  xfs: set buf types when converting extent formats
  ...

Pull quota interface unification and misc cleanups from Jan Kara:
 "The first part of the series unifying XFS and VFS quota interfaces.

  This part unifies turning quotas on and off so quota-tools and
  xfs_quota can be used to manage any filesystem.  This is useful so
  that userspace doesn't have to distinguish which filesystem it is
  working with.  As a result we can then easily reuse tests for project
  quotas in XFS for ext4.

  This also contains minor cleanups and fixes for udf, isofs, and ext3"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (23 commits)
  udf: remove bool assignment to 0/1
  udf: use bool for done
  quota: Store maximum space limit in bytes
  quota: Remove quota_on_meta callback
  ocfs2: Use generic helpers for quotaon and quotaoff
  ext4: Use generic helpers for quotaon and quotaoff
  quota: Add ->quota_{enable,disable} callbacks for VFS quotas
  quota: Wire up ->quota_{enable,disable} callbacks into Q_QUOTA{ON,OFF}
  quota: Split ->set_xstate callback into two
  xfs: Remove some pointless quota checks
  xfs: Remove some useless flags tests
  xfs: Remove useless test
  quota: Verify flags passed to Q_SETINFO
  quota: Cleanup flags definitions
  ocfs2: Move OLQF_CLEAN flag out of generic quota flags
  quota: Don't store flags for v2 quota format
  jbd: drop jbd_ENOSYS debug
  udf: destroy sbi mutex in put_super
  udf: Check length of extended attributes and allocation descriptors
  udf: Remove repeated loads blocksize
  ...

Pull file locking related changes #1 from Jeff Layton:
 "This patchset contains a fairly major overhaul of how file locks are
  tracked within the inode.  Rather than a single list, we now create a
  per-inode "lock context" that contains individual lists for the file
  locks, and a new dedicated spinlock for them.

  There are changes in other trees that are based on top of this set so
  it may be easiest to pull this in early"

* tag 'locks-v3.20-1' of git://git.samba.org/jlayton/linux:
  locks: update comments that refer to inode->i_flock
  locks: consolidate NULL i_flctx checks in locks_remove_file
  locks: keep a count of locks on the flctx lists
  locks: clean up the lm_change prototype
  locks: add a dedicated spinlock to protect i_flctx lists
  locks: remove i_flock field from struct inode
  locks: convert lease handling to file_lock_context
  locks: convert posix locks to file_lock_context
  locks: move flock locks to file_lock_context
  ceph: move spinlocking into ceph_encode_locks_to_buffer and ceph_count_locks
  locks: add a new struct file_locking_context pointer to struct inode
  locks: have locks_release_file use flock_lock_file to release generic flock locks
  locks: add new struct list_head to struct file_lock