- 21 May, 2014 1 commit
-
-
Bjørn Mork authored
The upper timer_interval limit is arbitrary and much higher than anything usable in the real world. Reducing it from 15s to ~4s to make the timer_interval fit in an u32 does not make much difference. The limit is still outside the practical bounds. This eliminates the need for a 64bit timer_interval, fixing a build error related to 64bit division: drivers/built-in.o: In function `cdc_ncm_get_coalesce': ak8975.c:(.text+0x1ac994): undefined reference to `__aeabi_uldivmod' Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 19 May, 2014 8 commits
-
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Included changes: - fix codestyle to respect new checkpatch warnings - increase internal version number
-
Rickard Strandqvist authored
There is otherwise a risk of a possible null pointer dereference. Was largely found by using a static code analysis program called cppcheck. Signed-off-by:
Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by:
-
Manuel Schölling authored
To be future-proof and for better readability the time comparisons are modified to use time_after() instead of raw math. Signed-off-by:
Manuel Schölling <manuel.schoelling@gmx.de> Signed-off-by:
-
Manuel Schölling authored
To be future-proof and for better readability the time comparisons are modified to use time_after() instead of raw math. Signed-off-by:
-
Christian Engelmayer authored
Function mlx4_en_set_channels() stops running ports before performing the requested action. In that case local variable 'port_up' is set so that the port is restarted at the end of the function, however, in case the port was not stopped, variable 'port_up' is left uninitialized and the behaviour is undetermined. Detected by Coverity - CID 751497. Signed-off-by:
Christian Engelmayer <cengelma@gmx.at> Acked-By:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
-
stephen hemminger authored
Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
stephen hemminger authored
Signed-off-by:
-
Alexei Starovoitov authored
fix build when BRIDGE_VLAN_FILTERING is not set Fixes: 2796d0c6 ("bridge: Automatically manage port promiscuous mode") Signed-off-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
-
- 18 May, 2014 3 commits
-
-
Simon Wunderlich authored
Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
Antonio Quartulli <antonio@meshcoding.com>
-
Antonio Quartulli authored
Reported by checkpatch with the following warning: "WARNING: macros should not use a trailing semicolon" Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch>
-
Antonio Quartulli authored
Reported by checkpatch with the following message: "WARNING: Missing a blank line after declarations" Signed-off-by:
-
- 17 May, 2014 13 commits
-
-
David S. Miller authored
Bjørn Mork says: ==================== cdc_ncm: add buffer tuning and stats using ethtool Quoting the previous description of this series (skip to the changelog below if you only want a summary of the changes): "I have got quite a few reports from frustrated users of OpenWRT hosts trying to use some powerful LTE modem, but not achieving full speed. This is typically caused by a combination of big buffers and little memory, giving in allocation errors and bad performance as a result. This series is an attempt to let users adjust the size of these buffers without having to rebuild the driver. Patches 1 - 4 are mostly rearranging existing code, in preparing for the dynamic buffer size changes. Patch 5 adds userspace control (ab)using the ethtool coalescing API. This isn't a perfect match, which is the main reason why I post this series as a RFC. Patch 6 is an unrelated framing optimization, reducing the overhead quite a bit and allowing for better use of smaller buffers. Patch 7 changes the way we calculate frame padding cutoff. The problem with big buffers is made much worse by the current padding strategy where zero padding often can account for more than 90% of the frames. Patch 8 add some counters giving some insight into how well the NCM/MBIM protocol works, supporting further tuning. Patch 9 reduce the initial maximum buffer size from 32kB to 16kB in an attempt to make the default better suit all. It is still possible to tune this up again to the old fixed max, using the new tuning knobs. I must admit that I had higher hopes for this series before I tested it on my own modems. One really unexpected result was that one of the MBIM modems accepted the new rx buffer size we set, but happily continued sending buffers of the same size as before. Needless to say: This did not work very well... So don't really expect to be able to use any values with any given device. Firmware implementations are still... I don't think I have words suitable for a public mailing list. But I am hoping this will help the many users who have had success rebuilding the driver with lower fixed limits. Please test and/or comment!" Changes: ** RFC -> v1 ** Patch 10 - a follow-up to a comment Joe Perches made in November 2013. I don't always forget :-) Patch 11 - removes the redundant "connected" driver state, and the associated .check_connect callbacks. ** v1 -> v2 ** Patch 1 - Better handling of minium rx buffer size, based on feedback from Oliver Neukum and Enrico Mioso Patch 5 - fixed locking around timer interval update Patch 9 - fixed whitespace error Patch 12 - new fix related to the tuneable tx timer ...and spelling fixes all over the commit messages. I have finally added a spelling hook, which I'm sure may of you will appreciate :-) ==================== Signed-off-by: -
Bjørn Mork authored
We can end up with a freshly allocated tx_curr_skb with no frames in it. In this case it does not make any sense to start the timer. This avoids the timer periodically trying to start tx when there is nothing in the queue. Signed-off-by:
-
Bjørn Mork authored
Calling netif_carrier_{on,off} is sufficient. There is no need to duplicate the carrier state in a driver specific flag. Acked-by:Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by:
-
Bjørn Mork authored
Reported-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Bjørn Mork authored
Lots of devices request much larger buffers than reasonable. This cause real problems for users of hosts with limited resources. Reducing the default buffer size to 16kB for such devices is a reasonable trade-off between allowing them to aggregate traffic and avoiding memory exhaustion on resource restrained hosts. Signed-off-by:
-
Bjørn Mork authored
To have an idea of the effects of the protocol coalescing it's useful to have some counters showing the different aspects. Due to the asymmetrical usbnet interface the netdev rx_bytes counter has been counting real received payload, while the tx_bytes counter has included the NCM/MBIM framing overhead. This overhead can be many times the payload because of the aggressive padding strategy of this driver, and will vary a lot depending on device and traffic. With very few exceptions, users are only interested in the payload size. Having an somewhat accurate payload byte counter is particularly important for mobile broadband devices, which many NCM devices and of course all MBIM devices are. Users and userspace applications will use this counter to monitor account quotas. Having protocol specific counters for the overhead, we are now able to correct the tx_bytes netdev counter so that it shows the real payload Signed-off-by:
-
Bjørn Mork authored
We pad frames larger than X to maximum size for devices which don't need a ZLP after maximum sized frames. This allows the device to optimize its transfers for one fixed buffer size. X was arbitrarily set at 512 bytes regardless of real buffer maximum, causing extreme overheads due to excessive padding of larger tx buffers. Limit the padding to at most 3 full USB packets, still allowing the overhead to payload ratio of 3/1. Signed-off-by:
-
Bjørn Mork authored
Many newer NCM and MBIM devices will request a maximum tx datagram count which is much smaller than our hard-coded absolute max. We can reduce the overhead without sacrificing any of the simplicity for these devices, by simply using the true negotiated count in when calculated the maximum NTH and NDP header sizes. Signed-off-by:
-
Bjørn Mork authored
Datagram coalescing is an integral part of the NCM and MBIM protocols, intended to reduce the interrupt load primarily on the device end of the USB link. As with all coalescing solutions, there is a trade-off between buffering and interrupts. The current defaults are based on the assumption that device side buffers should be the limiting factor. However, many modern high speed LTE modems suffers from buffer-bloat, making this assumption fail. This results in sub-optimal performance due to excessive coalescing. And in cases where such modems are connected to cheap embedded hosts there is often severe buffer allocation issues, giving very noticeable performance degradation . A start on improving this is going from build time hard coded limits to per device user configurable limits. The ethtool coalescing API was selected as user interface because, although the tuned values are buffer sizes, these settings directly control datagram coalescing. Signed-off-by:
-
Bjørn Mork authored
Finish the rx_max/tx_max setup by flushing buffers and informing usbnet about the changes. This way, the settings can be modified while the netdev is up and running. Signed-off-by:
-
Bjørn Mork authored
Now that we have split out the part of the device setup which MUST be done with the data interface in altsetting 0, we can delay the rest of the initialization. This allows us to move some of post-init buffer size config from bind to the appropriate setup function. The purpose of this refactoring is to collect all code adjusting the rx_max and tx_max buffers in one place, so that it is easier to call it from multiple call sites. Signed-off-by:
-
Bjørn Mork authored
Split the parts of setup dealing with device initialization from parts just setting defaults for attributes which might be changed after initialization. Some commands of the device initialization are only allowed when the data interface is in its disabled altsetting, so we must separate them out of we are to allow rerunning parts of setup. Signed-off-by:
-
Bjørn Mork authored
Split out the part of setup dealing with updating the rx_max and tx_max buffer sizes so that this code can be reused for dynamically updating the limits. Signed-off-by:
-
- 16 May, 2014 15 commits
-
-
Thomas Graf authored
Signed-off-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
-
David S. Miller authored
Phoebe Buckheister says: ==================== 802154: implement link-layer security This patch series implements 802.15.4-2011 link layer security. Patches 1 and 2 prepare for llsec by adding data structures to represent the llsec PIB as specified in 802.15.4-2011. I've changed some structures from their specification to be more sensible, since 802.15.4 specifies some structures in not-exactly-useful ways. Nested lists are common, but not very accessible for netlink methods, and not very fast to traverse when searching for specific elements either. Patch 3 implements backends for these structures in mac802154. Patch 4 and 5 implement the encryption and decryption methods, split from patch 3 to ease review. The encryption and decryption methods are almost entirely compliant with the specified outgoing/incoming frame procedures. Decryption deviates from the specification slightly where the specification makes no sense, i.e. encrypted frames with security level 0 may be sent, but must be dropped an reception - but transforms for processing such frames are given a few lines in the standard. I've opted to not drop these frames instead of not implementing the transforms that wouldn't be used if they were dropped. Patch 6 links the mac802154 llsec with the SoftMAC devices. This is mainly init//fini code for llsec context, handling of security subheaders and calling the encryption/decryption methods. Patch 7 adds sockopts to 802.15.4 dgram sockets to modifiy outgoing security parameters on a per-socket basis. Ideally, this would also be available for sockets on 6lowpan devices, but I'm not sure how to do that nicely. Patch 8 adds forwarders to the llsec configuration methods for netlink, patch 10 implements these netlink accessors. This is mainly mechanical. Patch 11, implements a key tracking option for devices that previous patches haven't, because I'm not entirely sure whether this is the best approach to the problem. It performs reasonably well though, so I decided to include it as a separate patch in this series instead of sending an RFC just for this one option. ==================== Signed-off-by: -
Phoebe Buckheister authored
The 802.15.4-2011 standard states that for each key, a list of devices that use this key shall be kept. Previous patches have only considered two options: * a device "uses" (or may use) all keys, rendering the list useless * a device is restricted to a certain set of keys Another option would be that a device *may* use all keys, but need not do so, and we are interested in the actual set of keys the device uses. Recording keys used by any given device may have a noticable performance impact and might not be needed as often. The common case, in which a device will not switch keys too often, should still perform well. Signed-off-by:
Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by:
-
Phoebe Buckheister authored
This patch adds user-visible interfaces for the llsec infrastructure. For the added methods, the only major difference between all add/remove implementation lies in how the specific object is parsed, and for dump requests, how objects are written into netlink messages. To save on boilerplate code, table dumps are routed through a helper function that handles netlink dump state, leaving the actual dumping code to care only about iterating over the table to be dumped and filling netlink messages. For add/remove methods, the boilerplate required to work is not quite as large, but still enough to also move into a local helper. Signed-off-by:
-
Phoebe Buckheister authored
Signed-off-by:
-
Phoebe Buckheister authored
Signed-off-by:
-
Phoebe Buckheister authored
Allow datagram sockets to override the security settings of the device they send from on a per-socket basis. Requires CAP_NET_ADMIN or CAP_NET_RAW, since raw sockets can send arbitrary packets anyway. Signed-off-by:
-
Phoebe Buckheister authored
Signed-off-by:
-
Phoebe Buckheister authored
Signed-off-by:
-
Phoebe Buckheister authored
Signed-off-by:
-
Phoebe Buckheister authored
This patch adds containers and mutators for the major ieee802154_llsec structures to mac802154. Most of the (rather simple) ieee802154_llsec structs are wrapped only to provide an rcu_head for orderly disposal, but some structs - llsec keys notably - require more complex bookkeeping. Since each llsec key may be referenced by a number of llsec key table entries (with differing key ids, but the same actual key), we want to save memory and not allocate crypto transforms for each entry in the table. Thus, the mac802154 llsec key is reference-counted instead. Further, each key will have four associated crypto transforms - three CCM transforms for the authsizes 4/8/16 and one CTR transform for unauthenticated encryption. If we had a CCM* transform that allowed authsize 0, and authsize as part of requests instead of transforms, this would not be necessary. Signed-off-by:
-
Phoebe Buckheister authored
Link-layer security requires AES CCM for authenticated modes and AES CTR for the unauthenticated encryption mode. Signed-off-by:
-
Phoebe Buckheister authored
The added structures match 802.15.4-2011 link-layer security PIBs as closely as is reasonable. Some lists required by the standard were modeled as bitmaps (frame_types and command_frame_ids in *llsec_key, 802.15.4-2011 7.5/Table 61), since using lists for those seems a bit excessive and not particularly useful. The DeviceDescriptorHandleList was inverted and is here a per-device list, since operations on this list are likely to have both a key and a device at hand, and per-device lists of keys are shorter than per-key lists of devices. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitchDavid S. Miller authored
Jesse Gross says: ==================== A set of OVS changes for net-next/3.16. The major change here is a switch from per-CPU to per-NUMA flow statistics. This improves scalability by reducing kernel overhead in flow setup and maintenance. ==================== Signed-off-by: -
David S. Miller authored
Thomas Petazzoni says: ==================== Add DT support for fixed PHYs Here is a fourth version of the patch set that adds a Device Tree binding and the related code to support fixed PHYs. I'm hoping to get this merged in 3.16. Changes since v3: * Rebased on top of v3.15-rc5 * In patch "net: phy: decouple PHY id and PHY address in fixed PHY driver", changed the PHY ID of fixed PHYs from 0xdeadbeef to 0x0, as suggested by Grant Likely. * Fixed the !CONFIG_PHY_FIXED case in patch "net: phy: extend fixed driver with fixed_phy_register()". Noticed by Florian Fainelli. * Added Acked-by from Grant Likely and Florian Fainelli on patch "net: phy: extend fixed driver with fixed_phy_register()". * Reworked the new fixed-link DT binding to be just a sub-node of the Ethernet MAC node, and not a node referenced by the 'phy' property. This was requested by Grant Likely. * Reworked the code implementing the new DT binding to also make it accept the old, single property based, DT binding. * Added a patch that actually uses the new fixed link DT binding for the Armada XP Matrix board. Changes since v2: * Rebased on top of v3.14-rc1, and re-tested on hardware. * Removed the RFC tag, since there seems to be some real interest in this feature, and the code has gone through several iterations already. * The error handling in fixed_phy_register() has been fixed. Changes since v1: * Instead of using a 'fixed-link' property inside the Ethernet device DT node, with a fairly cryptic succession of integer values, we now use a PHY subnode under the Ethernet device DT node, with explicit properties to configure the duplex, speed, pause and other PHY properties. * The PHY address is automatically allocated by the kernel and no longer visible in the Device Tree binding. * The PHY device is created directly when the network driver calls of_phy_connect_fixed_link(), and associated to the PHY DT node, which allows the existing of_phy_connect() function to work, without the need to use the deprecated of_phy_connect_fixed_link(). Posts of previous versions: RFCv1: http://www.spinics.net/lists/netdev/msg243253.html RFCv2: http://lists.infradead.org/pipermail/linux-arm-kernel/2013-September/196919.html PATCHv3: http://www.spinics.net/lists/netdev/msg273117.html ==================== Signed-off-by:
-
