- 17 Sep, 2018 40 commits
-
-
Luca Ceresoli authored
Rearrange the imx274_start_<N> register tables to better match the datasheet and slightly simplify code: - collapes tables 1 and 2, they are applied one after each other and together they implement the fixed part 1 of the startup procedure in the datasheet - while there, cleanup comments - rename tables 3 and 4 -> 2 and 3, coherently with the datasheet Signed-off-by:
Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Luca Ceresoli authored
The "mode" has been renamed to "binning" in commit 39dd23dc ("media: imx274: add cropping support via SELECTION API"), but this define has not been updated. Signed-off-by:
-
Sakari Ailus authored
The device is already suspended when it's the driver's remove function is called. Remove redundant pm_runtime_set_suspended call. Signed-off-by:
-
Sakari Ailus authored
Add the DT binding documentation for dw9714 and dw9807-vcm to the MAINTAINERS file. The dw9807-vcm binding documentation file is renamed to match the dw9807's VCM bit's compatible string. Signed-off-by:
-
Kieran Bingham authored
The UDS is currently restricted based on a partition size of 256 pixels. Document the actual restrictions, but don't increase the implementation. The extended partition algorithm may later choose to utilise a larger partition size to support overlapping partitions which will improve the quality of the output images. Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Kieran Bingham authored
The SRU is currently restricted to 256 pixels as part of the current partition algorithm. Document that the actual capability of this component is 288 pixels, but don't increase the implementation. The extended partition algorithm may later choose to utilise a larger input to support overlapping partitions which will improve the quality of the output images. Signed-off-by:
-
Kieran Bingham authored
The style of this driver uses periods at the end of sentences in comments, but it is applied inconsitently. Update a selection of comments which were discovered to be missing their period. Also fix the spelling of one usage of 'instantiate' Signed-off-by:
-
Kieran Bingham authored
The VSP1 has a minimum width and height of a single pixel, with the exception of pixel formats with sub-sampling. Remove the artificial minimum width and minimum height limitation, and instead clamp the minimum dimensions based upon the sub-sampling parameter of that dimension. Signed-off-by:
-
Koji Matsuoka authored
YCbCr planar formats can have different pitch values for the luma and chroma planes. This isn't taken into account in the driver. Fix it. Based on a BSP patch from Koji Matsuoka <koji.matsuoka.xm@renesas.com>. Fixes: 7863ac50 ("drm: rcar-du: Add tri-planar memory formats support") [Updated documentation of the struct vsp1_du_atomic_config pitch field] Signed-off-by:
Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by:
-
Laurent Pinchart authored
The LIF module has a data buffer to accommodate clock rate differences between the DU and the VSP. Several programmable threshold values control DU start of frame notification by the VSP and VSP clock stop/resume. The R-Car Gen2 and Gen3 datasheets recommend values for the different SoCs. Update the driver to use the recommended values for optimal operation. Based on a BSP patch from Koji Matsuoka <koji.matsuoka.xm@renesas.com>, with Gen2 and V3H/V3M updates. Signed-off-by:
-
Laurent Pinchart authored
All source files of the vsp1 driver are licensed under the GPLv2+ except for vsp1_regs.h which is licensed under GPLv2. This is caused by a bad copy&paste that dates back from the initial version of the driver. Fix it. Acked-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by:
Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by:
-
Kieran Bingham authored
Add myself as a co-maintainer for the Renesas VSP driver. Signed-off-by:
-
Mauro Carvalho Chehab authored
The recent tvp5150 patchset added two new warnings: drivers/media/i2c/tvp5150.c: In function 'tvp5150_querystd': drivers/media/i2c/tvp5150.c:829:18: warning: unused variable 'decoder' [-Wunused-variable] struct tvp5150 *decoder = to_tvp5150(sd); ^~~~~~~ drivers/media/i2c/tvp5150.c:1522:6: warning: no previous prototype for 'tvp5150_volatile_reg' [-Wmissing-prototypes] bool tvp5150_volatile_reg(struct device *dev, unsigned int reg) ^~~~~~~~~~~~~~~~~~~~ Get rid of them. Signed-off-by: -
Mauro Carvalho Chehab authored
When irq is used, the lock is set via IRQ code. When it isn't, the driver just assumes it is always locked. Instead, read the lock status from the status register. Signed-off-by: -
Philipp Zabel authored
Add the querystd video_op and make it return V4L2_STD_UNKNOWN while the TVP5150 is not locked to a signal. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Signed-off-by:
-
Marco Felsch authored
Add callback to retrieve the current set norm. Signed-off-by:
-
Philipp Zabel authored
Signed-off-by:
-
Philipp Zabel authored
Issue a V4L2_EVENT_SOURCE_CHANGE notification when the TVP5150 locks onto a signal and when it loses the lock. Signed-off-by:
-
Philipp Zabel authored
To avoid short frames on stream start, keep output pins at high impedance while we are not properly locked onto the input signal. Signed-off-by:
-
Philipp Zabel authored
This patch adds an optional interrupt handler to handle the sync lock interrupt and sync lock status. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> [m.felsch@pengutronix.de: move added .g_std callback to separate patch] Signed-off-by:
-
Philipp Zabel authored
To allow optional interrupt support, we want to configure the pin settings dynamically. Move those register accesses out of the static initialization tables. Signed-off-by:
-
Philipp Zabel authored
To trigger standard autodetection only the reset part of the routine is necessary during probe(). Split this out to make it callable on its own. [m.felsch@pengutronix.de: adapt commit message] [m.felsch@pengutronix.de: add tvp5150_enable() to tvp5150_s_stream()] [m.chehab@samsung.com: fix a compilation breakage] Signed-off-by:
-
Philipp Zabel authored
Make sure to not overwrite decoder->norm when setting the standard in hardware, but only when instructed by V4L2 API calls. Signed-off-by:
-
Philipp Zabel authored
If cropping isn't set explicitly by userspace, reset it to the maximum possible rectangle in subdevice open if a standard change is detected. Signed-off-by:
-
Marco Felsch authored
The patch adds three macros to bundle the mbus_framefmt default values and a helper function to set the the default crop and mbus_framefmt values. Signed-off-by:
-
Marco Felsch authored
Add two helper functions to check if two rectangles have the same position (top/left) and if two rectangles equals (same size and same position). Signed-off-by:
-
Marco Felsch authored
Since commit 9a4c7e68f7e0 ("media: tvp5150: convert register access to regmap")' the driver supports regmap. Now we can drop the handmade bit update sequence and move to the regmap provided helpers. Signed-off-by: -
Philipp Zabel authored
Regmap provides built in debugging, caching and provides dedicated accessors for bit manipulations in registers, which make the following changes a lot simpler. Signed-off-by:
-
Marco Felsch authored
The function only consists of a single switch case block without a default case. Unsupported control requests are indicated by the -EINVAL return code trough the last return statement at the end of the function. So exiting just the switch case block returns the -EINVAL error code but the hue control is supported and a zero should be returned instead. Replace the break by a 'return 0' to fix this behaviour. Fixes: d183e4ef ("[media] v4l: tvp5150: Add missing break in set control handler") Signed-off-by:
-
Marco Felsch authored
The driver ignored the width alignment which exists due to the UYVY colorspace format. Fix the width alignment and make use of the the provided v4l2 helper function to set the width, height and all alignments in one. Fixes: 963ddc63 ("[media] media: tvp5150: Add cropping support") Signed-off-by:
-
Mauro Carvalho Chehab authored
Now that all drivers are using pad signal types, we can get rid of the global static definition, as routes are stablished using the pad signal type. The tuner and IF-PLL pads are now used only by the tuner core, so move the definitions to be there. Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
As we don't need anymore to share pad numbers with similar drivers, use its own pad definition instead of a global model. Acked-by:
-
Mauro Carvalho Chehab authored
As we don't need anymore to share pad numbers with similar drivers, use its own pad definition instead of a global model. Acked-by:
-
Mauro Carvalho Chehab authored
As we don't need anymore to share pad numbers with similar drivers, use its own pad definition instead of a global model. Acked-by:
-
Mauro Carvalho Chehab authored
As we don't need anymore to share pad numbers with similar drivers, use its own pad definition instead of a global model. Acked-by:
-
Mauro Carvalho Chehab authored
As we don't need anymore to share pad numbers with similar drivers, use its own pad definition instead of a global model. Acked-by:
-
Mauro Carvalho Chehab authored
As we don't need anymore to share pad numbers with similar drivers, use its own pad definition instead of a global model. Acked-by:
-
Mauro Carvalho Chehab authored
As we don't need anymore to share pad numbers with similar drivers, use its own pad definition instead of a global model. Acked-by:
-
Mauro Carvalho Chehab authored
When creating the audio link, use pad signals, instead of hardcoding using the pad index number. Acked-by:
-
Mauro Carvalho Chehab authored
On tuner pads, multiple signals are present. Be sure to get the right PAD by using them. Acked-by:
-
