- 28 Oct, 2010 40 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (24 commits) quota: Fix possible oops in __dquot_initialize() ext3: Update kernel-doc comments jbd/2: fixed typos ext2: fixed typo. ext3: Fix debug messages in ext3_group_extend() jbd: Convert atomic_inc() to get_bh() ext3: Remove misplaced BUFFER_TRACE() in ext3_truncate() jbd: Fix debug message in do_get_write_access() jbd: Check return value of __getblk() ext3: Use DIV_ROUND_UP() on group desc block counting ext3: Return proper error code on ext3_fill_super() ext3: Remove unnecessary casts on bh->b_data ext3: Cleanup ext3_setup_super() quota: Fix issuing of warnings from dquot_transfer quota: fix dquot_disable vs dquot_transfer race v2 jbd: Convert bitops to buffer fns ext3/jbd: Avoid WARN() messages when failing to write the superblock jbd: Use offset_in_page() instead of manual calculation jbd: Remove unnecessary goto statement jbd: Use printk_ratelimited() in journal_alloc_journal_head() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_txLinus Torvalds authored
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (48 commits) DMAENGINE: move COH901318 to arch_initcall dma: imx-dma: fix signedness bug dma/timberdale: simplify conditional ste_dma40: remove channel_type ste_dma40: remove enum for endianess ste_dma40: remove TIM_FOR_LINK option ste_dma40: move mode_opt to separate config ste_dma40: move channel mode to a separate field ste_dma40: move priority to separate field ste_dma40: add variable to indicate valid dma_cfg async_tx: make async_tx channel switching opt-in move async raid6 test to lib/Kconfig.debug dmaengine: Add Freescale i.MX1/21/27 DMA driver intel_mid_dma: change the slave interface intel_mid_dma: fix the WARN_ONs intel_mid_dma: Add sg list support to DMA driver intel_mid_dma: Allow DMAC2 to share interrupt intel_mid_dma: Allow IRQ sharing intel_mid_dma: Add runtime PM support DMAENGINE: define a dummy filter function for ste_dma40 ...
-
git://github.com/schandinat/linux-2.6Linus Torvalds authored
* 'viafb-next' of git://github.com/schandinat/linux-2.6: (29 commits) viafb: add initial VX900 support viafb: fix hardware acceleration for suspend & resume viafb: make suspend and resume work (on all machines?) viafb: restore display on resume Minimal support for viafb suspend/resume viafb: use proper register for colour when doing fill ops viafb: add documentation for proc interface viafb: rename output devices viafb: add a mapping of supported output devices viafb: set sync polarity for all output devices viafb: add function to change sync polarity per device viafb: reduce I2C timeout and delay viafb: enable I2C for CRT viafb: fix i2c_transfer error handling viafb: vt1636 cleanup viafb: introduce per output device power management viafb: limit LCD code impact viafb: add interface for output device configuration viafb: merge the remaining output path with enable functions viafb: use new device routing ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300: (44 commits) MN10300: Save frame pointer in thread_info struct rather than global var MN10300: Change "Matsushita" to "Panasonic". MN10300: Create a defconfig for the ASB2364 board MN10300: Update the ASB2303 defconfig MN10300: ASB2364: Add support for SMSC911X and SMC911X MN10300: ASB2364: Handle the IRQ multiplexer in the FPGA MN10300: Generic time support MN10300: Specify an ELF HWCAP flag for MN10300 Atomic Operations Unit support MN10300: Map userspace atomic op regs as a vmalloc page MN10300: And Panasonic AM34 subarch and implement SMP MN10300: Delete idle_timestamp from irq_cpustat_t MN10300: Make various interrupt priority settings configurable MN10300: Optimise do_csum() MN10300: Implement atomic ops using atomic ops unit MN10300: Make the FPU operate in non-lazy mode under SMP MN10300: SMP TLB flushing MN10300: Use the [ID]PTEL2 registers rather than [ID]PTEL for TLB control MN10300: Make the use of PIDR to mark TLB entries controllable MN10300: Rename __flush_tlb*() to local_flush_tlb*() MN10300: AM34 erratum requires MMUCTR read and write on exception entry ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: usb-audio: automatically detect feedback format ASoC: sound/wm9090: add missing __devexit marker ASoC: sound/max98088: add missing __devexit marker ASoC: sound/ad73311: add missing __devexit marker ASoC: fsl - fix build error in pcm030-audio-fabric.c sound/oss/sb_ess.c: delete double assignment ALSA: hda - Change BTL amp level on some HP notebooks
-
Linus Torvalds authored
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (50 commits) perf python scripting: Add futex-contention script perf python scripting: Fixup cut'n'paste error in sctop script perf scripting: Shut up 'perf record' final status perf record: Remove newline character from perror() argument perf python scripting: Support fedora 11 (audit 1.7.17) perf python scripting: Improve the syscalls-by-pid script perf python scripting: print the syscall name on sctop perf python scripting: Improve the syscalls-counts script perf python scripting: Improve the failed-syscalls-by-pid script kprobes: Remove redundant text_mutex lock in optimize x86/oprofile: Fix uninitialized variable use in debug printk tracing: Fix 'faild' -> 'failed' typo perf probe: Fix format specified for Dwarf_Off parameter perf trace: Fix detection of script extension perf trace: Use $PERF_EXEC_PATH in canned report scripts perf tools: Document event modifiers perf tools: Remove direct slang.h include perf_events: Fix for transaction recovery in group_sched_in() perf_events: Revert: Fix transaction recovery in group_sched_in() perf, x86: Use NUMA aware allocations for PEBS/BTS/DS allocations ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds authored
* 'module' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: NULL-terminate all pci_device_id tables (trivial) Fix compiler warning in kernel/modules.c
-
Linus Torvalds authored
* akpm-incoming-2: (139 commits) epoll: make epoll_wait() use the hrtimer range feature select: rename estimate_accuracy() to select_estimate_accuracy() Remove duplicate includes from many files ramoops: use the platform data structure instead of module params kernel/resource.c: handle reinsertion of an already-inserted resource kfifo: fix kfifo_alloc() to return a signed int value w1: don't allow arbitrary users to remove w1 devices alpha: remove dma64_addr_t usage mips: remove dma64_addr_t usage sparc: remove dma64_addr_t usage fuse: use release_pages() taskstats: use real microsecond granularity for CPU times taskstats: split fill_pid function taskstats: separate taskstats commands delayacct: align to 8 byte boundary on 64-bit systems delay-accounting: reimplement -c for getdelays.c to report information on a target command namespaces Kconfig: move namespace menu location after the cgroup namespaces Kconfig: remove the cgroup device whitelist experimental tag namespaces Kconfig: remove pointless cgroup dependency namespaces Kconfig: make namespace a submenu ...
-
Linus Torvalds authored
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: percpu: Remove the multi-page alignment facility x86-32: Allocate irq stacks seperate from percpu area x86-32, mm: Remove duplicated #include x86, printk: Get rid of <0> from stack output x86, kexec: Make sure to stop all CPUs before exiting the kernel x86/vsmp: Eliminate kconfig dependency warning
-
Linus Torvalds authored
The BKL was pushed into this function when it was converted to use the unlocked_ioctl interface, but nothing that the function touches is actually protected by the BKL. So just remove the BKL entirely, so that we finally can get a realistic system build without the BKL being enabled at all. Signed-off-by:Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (108 commits) ehea: Fixing statistics bonding: Fix lockdep warning after bond_vlan_rx_register() tunnels: Fix tunnels change rcu protection caif-u5500: Build config for CAIF shared mem driver caif-u5500: CAIF shared memory mailbox interface caif-u5500: CAIF shared memory transport protocol caif-u5500: Adding shared memory include drivers/isdn: delete double assignment drivers/net/typhoon.c: delete double assignment drivers/net/sb1000.c: delete double assignment qlcnic: define valid vlan id range qlcnic: reduce rx ring size qlcnic: fix mac learning ehea: fix use after free inetpeer: __rcu annotations fib_rules: __rcu annotates ctarget tunnels: add __rcu annotations net: add __rcu annotations to protocol ipv4: add __rcu annotations to routes.c qlge: bugfix: Restoring the vlan setting. ...
-
Linus Torvalds authored
In commit f7347ce4 ("fasync: re-organize fasync entry insertion to allow it under a spinlock") Arnd took an earlier patch of mine that had the comment about the FASYNC flag above the wrong function. When the fasync_add_entry() function was split to introduce the new fasync_insert_entry() helper function, the code that actually cares about the FASYNC bit moved to that new helper. So just move the comment to the right point. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bklLinus Torvalds authored
* 'flock' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: locks: turn lock_flocks into a spinlock fasync: re-organize fasync entry insertion to allow it under a spinlock locks/nfsd: allocate file lock outside of spinlock lockd: fix nlmsvc_notify_blocked locking lockd: push lock_flocks down
-
Shawn Bohrer authored
This make epoll use hrtimers for the timeout value which prevents epoll_wait() from timing out up to a millisecond early. This mirrors the behavior of select() and poll(). Signed-off-by:
Shawn Bohrer <shawn.bohrer@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by:
Davide Libenzi <davidel@xmailserver.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Andrew Morton authored
Make it a subsystem-specific identifier because we wish to amke it non-static in the next patch ("epoll: make epoll_wait() use the hrtimer range feature"). Cc: Shawn Bohrer <shawn.bohrer@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: -
Zimny Lech authored
Signed-off-by:
Zimny Lech <napohybelskurwysynom2010@gmail.com> Signed-off-by:
-
Kyungmin Park authored
As each board and system has different memory for ramoops. It's better to define the platform data instead of module params. [akpm@linux-foundation.org: fix ramoops_remove() return type] Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Cc: Marco Stornelli <marco.stornelli@gmail.com> Signed-off-by:
-
Huang Shijie authored
If the same resource is inserted to the resource tree (maybe not on purpose), a dead loop will be created. In this situation, The kernel does not report any warning or error :( The command below will show a endless print. #cat /proc/iomem [akpm@linux-foundation.org: add WARN_ON()] Signed-off-by:
Huang Shijie <shijie8@gmail.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by:
-
Stefani Seibold authored
Add a new __kfifo_int_must_check_helper() helper function, which is needed for kfifo_alloc() to return the right signed integer value. The origin __kfifo_must_check_helper() helper was renamed into __kfifo_uint_must_check_helper() to show the sign which is expected and returned. (And revert the temporary disabling of __kfifo_must_check_helper()) Signed-off-by:
Stefani Seibold <stefani@seibold.net> Acked-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Brian Swetland authored
The search/pullup/add/remove device attributes were 0666 which would allow arbitrary users to affect the 1 wire bus. Change to 0664 to prevent that. I found this patch in the Android tree, apparently this has never been sent upstream so doing it now. Signed-off-by:
Brian Swetland <swetland@google.com> Signed-off-by:
Linus Walleij <linus.walleij@stericsson.com> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by:
-
FUJITA Tomonori authored
dma_addr_t is always 64 bit on alpha. So let's use dma_addr_t instead. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Signed-off-by:
-
FUJITA Tomonori authored
dma64_addr_t looks pointless (at least there is no point that an architecture has the own dma64_addr_t typedef). dma_addr_t is set to 32 or 64 bits appropriately. You can use u64 at places where you know that 64 bit address is always necessary. Let's use u64 instead for mips. Signed-off-by:
-
FUJITA Tomonori authored
dma64_addr_t looks pointless (at least there is no point that an architecture has the own dma64_addr_t typedef). dma_addr_t is set to 32 or 64 bits appropriately. You can use u64 at places where you know that 64 bit address is always necessary. Let's use u64 instead for sparc32. Looks like PCI654_REQUIRED_MASK or PCI64_ADR_BASE isn't used. They can be removed? Signed-off-by:
David Miller <davem@davemloft.net> Signed-off-by:
-
Miklos Szeredi authored
Replace iterated page_cache_release() with release_pages(), which is faster and shorter. Needs release_pages() to be exported to modules. Suggested-by:
Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
-
Michael Holzheu authored
The taskstats interface uses microsecond granularity for the user and system time values. The conversion from cputime to the taskstats values uses the cputime_to_msecs primitive which effectively limits the granularity to milliseconds. Add the cputime_to_usecs primitive for architectures that have better, more precise CPU time values. Remove cputime_to_msecs primitive because there are no more users left. Signed-off-by:
Michael Holzheu <holzheu@linux.vnet.ibm.com> Acked-by:
Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Luck Tony <tony.luck@intel.com> Cc: Shailabh Nagar <nagar1234@in.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Shailabh Nagar <nagar@us.ibm.com> Signed-off-by:
-
Michael Holzheu authored
Separate the finding of a task_struct by pid or tgid from filling the taskstats data. This makes the code more readable. Signed-off-by:
-
Michael Holzheu authored
Move each taskstats command into a single function. This makes the code more readable and makes it easier to add new commands. Signed-off-by:
-
Jeff Mahoney authored
prepare_reply() sets up an skb for the response. The payload contains: +--------------------------------+ | genlmsghdr - 4 bytes | +--------------------------------+ | NLA header - 4 bytes | /* Aggregate header */ +-+------------------------------+ | | NLA header - 4 bytes | /* PID header */ | +------------------------------+ | | pid/tgid - 4 bytes | | +------------------------------+ | | NLA header - 4 bytes | /* stats header */ | + -----------------------------+ <- oops. aligned on 4 byte boundary | | struct taskstats - 328 bytes | +-+------------------------------+ The start of the taskstats struct must be 8 byte aligned on IA64 (and other systems with 8 byte alignment rules for 64-bit types) or runtime alignment warnings will be issued. This patch pads the pid/tgid field out to sizeof(long), which forces the alignment of taskstats. The getdelays userspace code is ok with this since it assumes 32-bit pid/tgid and then honors that header's length field. An array is used to avoid exposing kernel memory contents to userspace in the response. Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by:
-
Mel Gorman authored
Task delay-accounting was identified as one means of determining how long a process spends in congestion_wait() without adding new statistics. For example, if the workload should not be doing IO, delay-accounting could reveal how long it was spending in unexpected IO or delays. Unfortunately, on closer examination it was clear that getdelays does not act as documented. Commit a3baf649 ("per-task-delay-accounting: documentation") added Documentation/accounting/getdelays.c with a -c switch that was documented to fork/exec a child and report statistics on it but for reasons that are unclear to me, commit 9e06d3f9 deleted support for this switch but did not update the documentation. It might be an oversight or it might be because the control flow of the program meant that accounting information would be printed once early in the lifetime of the program making it of limited use. This patch reimplements -c for getdelays.c to act as documented. Unlike the original version, it waits until the command completes before printing any information on it. An example of it being used looks like $ ./getdelays -d -c find /home/mel -name mel print delayacct stats ON /home/mel /home/mel/.notes-wine/drive_c/windows/profiles/mel /home/mel/.wine/drive_c/windows/profiles/mel /home/mel/git-configs/dot.kde/share/apps/konqueror/home/mel PID 5923 CPU count real total virtual total delay total 42779 5051232096 5164722692 564207988 IO count delay total 41727 97804147758 SWAP count delay total 0 0 RECLAIM count delay total 0 0 [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Mel Gorman <mel@csn.ul.ie> Acked-by:
Balbir Singh <balbir@in.ibm.com> Signed-off-by:
-
Daniel Lezcano authored
We have the namespaces as a menuconfig like the cgroup. The cgroup and the namespace are two base bricks for the containers. It is more logical to put the namespace menu right after the cgroup menu. Signed-off-by:
Daniel Lezcano <daniel.lezcano@free.fr> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: "Serge E. Hallyn" <serue@us.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Paul Menage <menage@google.com> Signed-off-by:
-
Daniel Lezcano authored
This subsystem is merged since a long time now, I think we can consider it mature enough. Signed-off-by:
-
Daniel Lezcano authored
The different cgroup subsystems are under the cgroup submenu. The dependency between the cgroups and the menu subsystems is pointless. Signed-off-by:
Li Zefan <lizf@cn.fujitsu.com> Cc: "Serge E. Hallyn" <serue@us.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Paul Menage <menage@google.com> Signed-off-by:
-
Daniel Lezcano authored
Make the namespaces config option a submenu. Signed-off-by:
-
Daniel Lezcano authored
As the different namespaces depend on 'CONFIG_NAMESPACES', it is logical to enable all the namespaces when we enable NAMESPACES. Signed-off-by:
Matt Helsley <matthltc@us.ibm.com> Acked-by:
Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by:
-
Daniel Lezcano authored
The pid namespace is in the kernel since 2.6.27 and the net_ns since 2.6.29. They are enabled in the distro by default and used by userspace component. They are mature enough to remove the 'experimental' label. Signed-off-by:
-
Alexandre Bounine authored
Replace possibly damaging broadcast writes into the per-port SP_MODE registers with individual writes for each port. This will preserve individual port configurations in case if ports are configured differently. Signed-off-by:
Alexandre Bounine <alexandre.bounine@idt.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Micha Nelissen <micha@neli.hopto.org> Signed-off-by:
-
Alexandre Bounine authored
Replace hardcoded maximum port number with actual reported number of switch ports. Signed-off-by:
-
Alexandre Bounine authored
RapidIO spec v.2.1 adds Idle Sequence 2 into LP-Serial Physical Layer. The fix ensures that corresponding bits are not corrupted during error handling. Signed-off-by:
-
Alexandre Bounine authored
Detects RIO link to the already enumerated device and properly sets links between device objects. Changes to the enumeration/discovery logic: 1. Use Master Enable bit to signal end of the enumeration - agents may start their discovery process as soon as they see this bit set (Component Tag register was used before for this purpose). 2. Enumerator sets Component Tag (!= 0) immediately during device setup. This allows to identify the device if the redundant route exists in a RIO system. Signed-off-by:
-
Alexandre Bounine authored
Add the RIO switch driver and definitions for IDT CPS-1848 and CPS-1616 Gen2 devices. Signed-off-by:
-
