Discard a common out-of-date comment in 5 hardware monitoring drivers.
The hardware monitoring chip drivers are no more setting sensor limits
at initialization time, for quite some time already.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 drivers/hwmon/lm78.c     |    1 -
 drivers/hwmon/via686a.c  |    1 -
 drivers/hwmon/w83627hf.c |    1 -
 drivers/hwmon/w83781d.c  |    1 -
 drivers/hwmon/w83792d.c  |    1 -
 5 files changed, 5 deletions(-)

Kill explicit static initializations to 0 in 2 hwmon drivers.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 drivers/hwmon/adm1021.c |    2 +-
 drivers/hwmon/via686a.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

Kill explicit static initializations to 0 in 10 i2c drivers.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 drivers/i2c/algos/i2c-algo-pca.c    |    2 +-
 drivers/i2c/algos/i2c-algo-sibyte.c |    2 +-
 drivers/i2c/busses/i2c-ali15x3.c    |    4 ++--
 drivers/i2c/busses/i2c-amd756.c     |    2 +-
 drivers/i2c/busses/i2c-iop3xx.c     |    2 +-
 drivers/i2c/busses/i2c-piix4.c      |    8 ++++----
 drivers/i2c/busses/i2c-sis5595.c    |    4 ++--
 drivers/i2c/busses/i2c-sis630.c     |    2 +-
 drivers/i2c/busses/i2c-sis96x.c     |    2 +-
 drivers/i2c/busses/i2c-via.c        |    2 +-
 10 files changed, 15 insertions(+), 15 deletions(-)

Do not enable the VIA VT82C686A/B integrated sensors by default, as
disabled sensors usually means that this feature is not used so the
values won't make any sense. This has been confusing many users in the
past:

  http://www2.lm-sensors.nu/~lm78/readticket.cgi?ticket=1786
  http://www2.lm-sensors.nu/~lm78/readticket.cgi?ticket=1811
  http://www2.lm-sensors.nu/~lm78/readticket.cgi?ticket=2052

It is still possible to forcibly enable the sensors by using the
force_addr module parameter.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 Documentation/hwmon/via686a |   17 +++++++++++++++--
 drivers/hwmon/via686a.c     |   18 +++++++++++-------
 2 files changed, 26 insertions(+), 9 deletions(-)

This whitespace cleanup patch removes one trailing space and breaks
lines longer than 80 characters.
Signed-off-by: Grant Coady <gcoady@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 drivers/hwmon/adm9240.c |   33 +++++++++++++++++++++------------
 1 file changed, 21 insertions(+), 12 deletions(-)

We can save 0.5kB of data in the via686a driver.

From: Denis Vlasenko <vda@ilport.com.ua>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

hwmon: adm9240 update 2/2: convert to use dynamic sysfs accessors

This patch converts adm9240 to use Yani Ioannou's dynamic sysfs callbacks,
reducing driver memory footprint from 16312 to 14104 bytes on 2.6.14-rc1,
removing the old driver macro mess.

Run tested on Intel SE440BX-2 mobo.
Signed-off-by: Grant Coady <gcoady@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

hwmon: adm9240 update 1/2: cleanups:

o remove i2c read/write wrapper interface as it does nothing,
o change kmalloc + memset to kzalloc
Signed-off-by: Grant Coady <gcoady@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

5.1.3.  Maximum Response Code

   The Maximum Response Code field specifies the maximum time allowed
   before sending a responding Report.  The actual time allowed, called
   the Maximum Response Delay, is represented in units of milliseconds,
   and is derived from the Maximum Response Code as follows:

   If Maximum Response Code < 32768,
      Maximum Response Delay = Maximum Response Code

   If Maximum Response Code >=32768, Maximum Response Code represents a
   floating-point value as follows:

       0 1 2 3 4 5 6 7 8 9 A B C D E F
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |1| exp |          mant         |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

   Maximum Response Delay = (mant | 0x1000) << (exp+3)


5.1.9.  QQIC (Querier's Query Interval Code)

   The Querier's Query Interval Code field specifies the [Query
   Interval] used by the Querier.  The actual interval, called the
   Querier's Query Interval (QQI), is represented in units of seconds,
   and is derived from the Querier's Query Interval Code as follows:

   If QQIC < 128, QQI = QQIC

   If QQIC >= 128, QQIC represents a floating-point value as follows:

       0 1 2 3 4 5 6 7
      +-+-+-+-+-+-+-+-+
      |1| exp | mant  |
      +-+-+-+-+-+-+-+-+

   QQI = (mant | 0x10) << (exp + 3)

                                                -- rfc3810

#define MLDV2_QQIC(value) MLDV2_EXP(0x80, 4, 3, value)
#define MLDV2_MRC(value) MLDV2_EXP(0x8000, 12, 3, value)

Above macro are defined in mcast.c. but 1 << 4 == 0x10 and 1 << 12 == 0x1000.
So the result computed by original Macro is larger.
Signed-off-by: Yan Zheng <yanzheng@21cn.com>
Acked-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>

Attached is kernel patch for UDP Fragmentation Offload (UFO) feature.

1. This patch incorporate the review comments by Jeff Garzik.
2. Renamed USO as UFO (UDP Fragmentation Offload)
3. udp sendfile support with UFO

This patches uses scatter-gather feature of skb to generate large UDP
datagram. Below is a "how-to" on changes required in network device
driver to use the UFO interface.

UDP Fragmentation Offload (UFO) Interface:
-------------------------------------------
UFO is a feature wherein the Linux kernel network stack will offload the
IP fragmentation functionality of large UDP datagram to hardware. This
will reduce the overhead of stack in fragmenting the large UDP datagram to
MTU sized packets

1) Drivers indicate their capability of UFO using
dev->features |= NETIF_F_UFO | NETIF_F_HW_CSUM | NETIF_F_SG

NETIF_F_HW_CSUM is required for UFO over ipv6.

2) UFO packet will be submitted for transmission using driver xmit routine.
UFO packet will have a non-zero value for

"skb_shinfo(skb)->ufo_size"

skb_shinfo(skb)->ufo_size will indicate the length of data part in each IP
fragment going out of the adapter after IP fragmentation by hardware.

skb->data will contain MAC/IP/UDP header and skb_shinfo(skb)->frags[]
contains the data payload. The skb->ip_summed will be set to CHECKSUM_HW
indicating that hardware has to do checksum calculation. Hardware should
compute the UDP checksum of complete datagram and also ip header checksum of
each fragmented IP packet.

For IPV6 the UFO provides the fragment identification-id in
skb_shinfo(skb)->ip6_frag_id. The adapter should use this ID for generating
IPv6 fragments.
Signed-off-by: Ananda Raju <ananda.raju@neterion.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (forwarded)
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>

The xtTruncate code was only doing this for leaf pages.  When a file is
horribly fragmented, we may truncate a file leaving an internal page with
an invalid head.next field, which may cause a stale page to be referenced.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>

If a BPA 100/105 device contains more then one interface then ignore the
additional interfaces, because they are unused.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

This patch updates the HCI security filter with support for the Extended
Inquiry Response (EIR) feature.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

This patch makes another bunch of functions static.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

This patch contains the big cleanup of the HCI UART driver. The uneeded
header files are removed and their structure declarations are moved into
the protocol implementations.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

The TXCRC compile option is not really useful and thus change it
into a module parameter.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

This patch moves rfcomm_crc_table[] into the RFCOMM core, because there
is no need to keep it in a separate file.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

driver/base: add missing function parameters; eliminate all warnings.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

In PM v1, all devices were called at SUSPEND_DISABLE level.  Then
all devices were called at SUSPEND_SAVE_STATE level, and finally
SUSPEND_POWER_DOWN level.  However, with PM v2, to maintain
compatibility for platform devices, I arranged for the PM v2
suspend/resume callbacks to call the old PM v1 suspend/resume
callbacks three times with each level in order so that existing
drivers continued to work.

Since this is obsolete infrastructure which is no longer necessary,
we can remove it.  Here's an (untested) patch to do exactly that.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This is the Documentation/ part of the big kfree cleanup patch.

Remove pointless checks for NULL prior to calling kfree() in example code in Documentation/.
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The 071 release is needed to handle the input changes.  Older versions
will work properly with module-based systems, but not for users that
build input stuff into the kernel.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

There are a number of sparse warnings from the latest sparse
snapshot being generated from the drivers/base build. The
main culprits are due to the initialisation functions not
being declared in a header file.

Also, the firmware.c file should include <linux/device.h>
to get the prototype of  firmware_register() and
firmware_unregister().

This patch moves the init function declerations from the
init.c file to the base.h, and ensures it is included in
all the relevant c sources. It also adds <linux/device.h>
to the included headers for firmware.c.

The patch does not solve all the sparse errors generated,
but reduces the count significantly.

drivers/base/core.c:161:1: warning: symbol 'devices_subsys' was not declared. Should it be static?
drivers/base/core.c:417:12: warning: symbol 'devices_init' was not declared. Should it be static?
drivers/base/sys.c:253:6: warning: symbol 'sysdev_shutdown' was not declared. Should it be static?
drivers/base/sys.c:326:5: warning: symbol 'sysdev_suspend' was not declared. Should it be static?
drivers/base/sys.c:428:5: warning: symbol 'sysdev_resume' was not declared. Should it be static?
drivers/base/sys.c:450:12: warning: symbol 'system_bus_init' was not declared. Should it be static?
drivers/base/bus.c:133:1: warning: symbol 'bus_subsys' was not declared. Should it be static?
drivers/base/bus.c:667:12: warning: symbol 'buses_init' was not declared. Should it be static?
drivers/base/class.c:759:12: warning: symbol 'classes_init' was not declared. Should it be static?
drivers/base/platform.c:313:12: warning: symbol 'platform_bus_init' was not declared. Should it be static?
drivers/base/cpu.c:110:12: warning: symbol 'cpu_dev_init' was not declared. Should it be static?
drivers/base/firmware.c:17:5: warning: symbol 'firmware_register' was not declared. Should it be static?
drivers/base/firmware.c:23:6: warning: symbol 'firmware_unregister' was not declared. Should it be static?
drivers/base/firmware.c:28:12: warning: symbol 'firmware_init' was not declared. Should it be static?
drivers/base/init.c:28:13: warning: symbol 'driver_init' was not declared. Should it be static?
drivers/base/dmapool.c:174:10: warning: implicit cast from nocast type
drivers/base/attribute_container.c:439:1: warning: symbol 'attribute_container_init' was not declared. Should it be static?
drivers/base/power/runtime.c:76:6: warning: symbol 'dpm_set_power_state' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Input: remove custom-made hotplug handler

Now that all input devices are registered with sysfs we can remove
old custom-made hotplug handler and crate a standard one.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This creates symlinks in /sys/class/input/ to the nested class devices
to help userspace cope with the nesting.

Unfortunatly udev still needs to be updated as it can't handle symlinks
properly here :(
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This is needed so we can actually use the class device within the input
handlers.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Input: export various input device attributes via sysfs

The following structure is exported:

  input0/
	|-- name
	|-- phys
	|-- uniq
	|-- id/{bustype|vendor|product|version}
	`-- capabilities/{ev|abs|rel|key|led|msc|ff|sw}
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Input: show sysfs path in /proc/bus/input/devices

Show that sysfs and phys path are different objects.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Input: convert sound/ppc/beep to dynamic input_dev allocation

This is required for input_dev sysfs integration
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Input: convert net/bluetooth to dynamic input_dev allocation

This is required for input_dev sysfs integration
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>