- 15 Jun, 2016 16 commits
-
-
Sowmini Varadhan authored
The only caller of rds_send_get_message() was rds_iw_send_cq_comp_handler() which was removed as part of commit dcdede04 ("RDS: Drop stale iWARP RDMA transport"), so remove rds_send_get_message() for the same reason. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sowmini Varadhan authored
rds_send_path_drop_acked() is the path-specific version of rds_send_drop_acked() to be invoked by MP capable callers. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sowmini Varadhan authored
rds_send_path_reset() is the path specific version of rds_send_reset() intended for MP capable callers. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sowmini Varadhan authored
t_mp_capable transports can use rds_inc_path_init to initialize all fields in struct rds_incoming, including the i_conn_path. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sowmini Varadhan authored
Transports that are t_mp_capable should set the rds_conn_path on which the datagram was recived in the ->i_conn_path field of struct rds_incoming. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sowmini Varadhan authored
The t_mp_capable bit will be used in the core rds module to support multipathing logic when the transport supports it. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sowmini Varadhan authored
In preparation for multipath RDS, split the rds_connection structure into a base structure, and a per-path struct rds_conn_path. The base structure tracks information and locks common to all paths. The workqs for send/recv/shutdown etc are tracked per rds_conn_path. Thus the workq callbacks now work with rds_conn_path. This commit allows for one rds_conn_path per rds_connection, and will be extended into multiple conn_paths in subsequent commits. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Neal Cardwell authored
Make sure that dctcp_get_info() returns only the size of the info->dctcp struct that it zeroes out and fills in. Previously it had been returning the size of the enclosing tcp_cc_info union, sizeof(*info). There is no problem yet, but that union that may one day be larger than struct tcp_dctcp_info, in which case the TCP_CC_INFO code might accidentally copy uninitialized bytes from the stack. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wei Yongjun authored
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'rxrpc-rewrite-20160613' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc: Rename rxrpc source files Here's the next part of the AF_RXRPC rewrite. In this set I rename some of the files in the net/rxrpc/ directory and adjust the Makefile and ar-internal.h to reflect the changes. The aim is twofold: (1) Remove the "ar-" prefix on those files that have it as it's not really useful, especially now that I'm building rxkad in. (2) To aid splitting the local, peer, connection and call handling code into separate files for object and event handling in future patches by making it easier to come up with new filenames. There are two commits: (1) The first commit does a bunch of renames of .c files and alters the Makefile. ar-internal.h isn't renamed at this time to avoid having to change the contents of the files being renamed. (2) The second commit changes the section label comments in ar-internal.h to reflect the changed filenames and reorders the file so that the sections are back in filename order. The patches can be found here also: http://git.kernel.org/cgit/linux/kernel/git/dhowells/linux-fs.git/log/?h=rxrpc-rewrite Tagged thusly: git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs.git rxrpc-rewrite-20160613 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kejian Yan authored
After the patchset about adding support of ACPI (commit id is 63434888) being applied, HNS does not depend on OF. It depends on OF or ACPI, so the Kconfig file needs to be updated. Signed-off-by: Kejian Yan <yankejian@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Hayes Wang says: ==================== r8152: code adjustment for PHY These patches are for adjusting the code about PHY and setting speed. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
hayeswang authored
The user may change the speed. Use it to replace the default one. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
hayeswang authored
Move calling set_speed() from open() to rtl_hw_phy_work_func_t(). Then, we would set the default speed only for first initialization or after resuming. Besides, the set_speed() could handle the flag of PHY_RESET which would be set in rtl_ops.hw_phy_cfg(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
hayeswang authored
Move the settings of PHY to a work queue and schedule it after rtl_ops.init(). There are some reasons for this. First, the settings are only needed for the first time initialization or after the power down occurs. Second, the settings are independent with the others. Last, the settings may take more time than the others. Leave they in probe() or open() may delay the following flows. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amir Vadai authored
When skip_sw is set and hardware fails to apply filter, return error to user. This will make error propagation logic similar to the one currently used in u32 classifier. Also, changed code to use tc_skip_sw() utility function. Signed-off-by: Amir Vadai <amirva@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 14 Jun, 2016 14 commits
-
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Updates for net-next. -Add default VLAN support for VFs. -Add NPAR (NIC partioning) support. -Add support for new device 5731x and 5741x. GRO logic is different. -Support new ETHTOOL_{G|S}LINKSETTINGS. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
To fully support 25G and 50G link settings. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Some cards do not support autoneg. The current code does not prevent the user from enabling autoneg with ethtool on such cards, causing confusion. Firmware provides the autoneg capability information and we just need to store it in the support_auto_speeds field in bnxt_link_info struct. The ethtool set_settings() call will check this field before proceeding with autoneg. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Add bnxt_gro_func_5731x() to handle GRO packets for this chip. The completion structures used in the new chip have new data to help determine the header offsets. The offsets can be off by 4 if the packet is an internal loopback packet (e.g. from one VF to another VF). Some additional logic is added to adjust the offsets if it is a loopback packet. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Newer chips require different logic to handle GRO packets. So refactor the code so that we can call different functions depending on the chip. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Define all the supported chip numbers and chip categories. Store the chip_num returned by firmware. If the call to get the version and chip number fails, we should abort. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Satish Baddipadige authored
NPAR type is read from bnxt_hwrm_func_qcfg. Do not allow changing link parameters if in NPAR mode sinc ethe port is shared among multiple partitions. The link parameters are set up by firmware. Signed-off-by: Satish Baddipadige <sbaddipa@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
When the VF driver gets this event, the VF configuration has changed (such as default VLAN). The VF driver will initiate a silent reset to pick up the new configuration. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
When a default VLAN is added to the VF, the VF driver needs to reset to pick up the default VLAN ID. We can use the same tx timeout reset logic to do that, without the debug output. This new function, with the silent parameter to suppress debug output will now serve both purposes. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
The PF can setup a default VLAN for a VF. The default VLAN tag is automatically inserted and stripped without the knowledge of the stack running on the VF. The VF driver needs to know that default VLAN is enabled as VLAN acceleration on the RX side is no longer supported. Call netdev_update_features() to fix up the VLAN features as necessary. Also, VLAN strip mode must be enabled to strip out the default VLAN tag. Only allow VF default VLAN to be set if the firmware spec is >= 1.2.1. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move the enic driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mike Rapoport authored
The commit e858fae2 ("virtio_net: use common code for virtio_net_hdr and skb GSO conversion") replaced the tun code for header manipulation with the generic helpers. While doing so, it implictly moved the skb_partial_csum_set() invocation after eth_type_trans(), which invalidate the current gso start/offset values. Fix it by moving the helper invocation before the mac pulling. Fixes: e858fae2 ("virtio_net: use common code for virtio_net_hdr and skb GSO conversion") Reported-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 13 Jun, 2016 4 commits
-
-
David Howells authored
Update the section comments in ar-internal.h that indicate the locations of the referenced items to reflect the renames done to the .c files in net/rxrpc/. This also involves some rearrangement to reflect keep the sections in order of filename. Signed-off-by: David Howells <dhowells@redhat.com>
-
David Howells authored
Rename files matching net/rxrpc/ar-*.c to get rid of the "ar-" prefix. This will aid splitting those files by making easier to come up with new names. Note that the not all files are simply renamed from ar-X.c to X.c. The following exceptions are made: (*) ar-call.c -> call_object.c ar-ack.c -> call_event.c call_object.c is going to contain the core of the call object handling. Call event handling is all going to be in call_event.c. (*) ar-accept.c -> call_accept.c Incoming call handling is going to be here. (*) ar-connection.c -> conn_object.c ar-connevent.c -> conn_event.c The former file is going to have the basic connection object handling, but there will likely be some differentiation between client connections and service connections in additional files later. The latter file will have all the connection-level event handling. (*) ar-local.c -> local_object.c This will have the local endpoint object handling code. The local endpoint event handling code will later be split out into local_event.c. (*) ar-peer.c -> peer_object.c This will have the peer endpoint object handling code. Peer event handling code will be placed in peer_event.c (for the moment, there is none). (*) ar-error.c -> peer_event.c This will become the peer event handling code, though for the moment it's actually driven from the local endpoint's perspective. Note that I haven't renamed ar-transport.c to transport_object.c as the intention is to delete it when the rxrpc_transport struct is excised. The only file that actually has its contents changed is net/rxrpc/Makefile. net/rxrpc/ar-internal.h will need its section marker comments updating, but I'll do that in a separate patch to make it easier for git to follow the history across the rename. I may also want to rename ar-internal.h at some point - but that would mean updating all the #includes and I'd rather do that in a separate step. Signed-off-by: David Howells <dhowells@redhat.com.
-
Florian Westphal authored
sch_atm returns this when TC_ACT_SHOT classification occurs. But all other schedulers that use tc_classify (htb, hfsc, drr, fq_codel ...) return NET_XMIT_SUCCESS | __BYPASS in this case so just do that in atm. BATMAN uses it as an intermediate return value to signal forwarding vs. buffering, but it did not return POLICED to callers outside of BATMAN. Reviewed-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stefan Wahren authored
Since msleep is based on jiffies the PHY reset could take longer than expected. So use msleep for values greater than 20 msec otherwise usleep_range. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 11 Jun, 2016 6 commits
-
-
Hannes Frederic Sowa authored
In IPv6 the ToS values are part of the flowlabel in flowi6 and get extracted during fib rule lookup, but we forgot to correctly initialize the flowlabel before the routing lookup. Reported-by: <liam.mcbirnie@boeing.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Eric Dumazet says: ==================== net_sched: remove qdisc_is_throttled() HTB, CBQ and HFSC pay a very high cost updating the qdisc 'throttled' status that nothing but CBQ seems to use. CBQ usage is flaky anyway, since no qdisc ->enqueue() updates the 'throttled' qdisc status. This looks like some 'optimization' that actually cost more than code without the optimization, and might cause latency issues with CBQ. In my tests, I could achieve a 8 % performance increase in TCP_RR workload through HTB qdisc, in presence of throttled classes, and 5 % without throttled classes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
__QDISC_STATE_THROTTLED bit manipulation is rather expensive for HTB and few others. I already removed it for sch_fq in commit f2600cf0 ("net: sched: avoid costly atomic operation in fq_dequeue()") and so far nobody complained. When one ore more packets are stuck in one or more throttled HTB class, a htb dequeue() performs two atomic operations to clear/set __QDISC_STATE_THROTTLED bit, while root qdisc lock is held. Removing this pair of atomic operations bring me a 8 % performance increase on 200 TCP_RR tests, in presence of throttled classes. This patch has no side effect, since nothing actually uses disc_is_throttled() anymore. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Looks like it is only there as some optimization attempt. Since __QDISC_STATE_THROTTLED set/unset is way too expensive, and netem is the last user, just remove this check. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
So far no qdisc ever unset the throttled bit at enqueue() time, so CBQ usage of qdisc_is_throttled() was flaky. Since __QDISC_STATE_THROTTLED set/unset is way too expensive considering that only CBQ was eventually caring for this status, it would make sense to implement a Qdisc ops ->is_throttled() if we find that this is needed. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
We want to get rid of generic qdisc throttled management, so this qdisc has to use a private flag. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-