- 09 Sep, 2005 12 commits
-
-
Greg Ungerer authored
Add support definitions for the integrated UARTs on the 523x ColdFire processor family. Signed-off-by:
Greg Ungerer <gerg@uclinux.com> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Greg Ungerer authored
Rework the 68x328 configuration and setup code. All 68x328 varient share the same timer hardware, so extract that into its own file, instead of keeping copies in each processors setup code. Signed-off-by:
-
Greg Ungerer authored
Create common 68VZ328 config code. It is essentially the same for all boards that use this, so no point having a version of it for each. Signed-off-by:
-
Greg Ungerer authored
Remove DragonEngine2 specific config code. Use common 68VZ328 config code now. Signed-off-by:
-
Greg Ungerer authored
Remove uCdimm specific config code. Use common 68VZ328 config code now. Signed-off-by:
-
Greg Ungerer authored
Signed-off-by:
-
Greg Ungerer authored
Add processor level and clock support defines for the ColdFire 523x processor. Signed-off-by:
-
Greg Ungerer authored
ColdFire 523x processor hardware register definitions. Signed-off-by:
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Linus Torvalds authored
-
- 08 Sep, 2005 28 commits
-
-
Henk authored
Signed-off-by:
Henk Vergonet <henk.vergonet@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Greg Kroah-Hartman authored
sparse still complains about the htons usage, but I'll leave that for others to fix. Signed-off-by: -
Henk authored
This patch aggregates all modifications in the -mm tree and adds complete ringtone support. The following features are supported: - keyboard full support - LCD full support - LED full support - dialtone full support - ringtone full support - audio playback via generic usb audio diver - audio record via generic usb audio diver For driver documentation see: Documentation/input/yealink.txt For vendor documentation see: http://yealink.comSigned-off-by:
-
Nick Sillik authored
As sugested by Alan Stern here are a few code cleanups for onetouch.c: -Check number of endpoints before directly referencing intf->endpoint[2] -Use defined constants instead of magic numbers -Revmove the non-ascii characters from copyright notice -Make registration and deregistration messages more similar Signed-off-by:
Nick Sillik <n.sillik@temple.edu> Signed-off-by:
-
Pete Zaitcev authored
This code looks at urb->transfer_dma, maps the page and takes the data. I am looking for volunteers to contribute architectures other than i386 or to develop an architecure-neutral API for it (or point me that it was done already). Signed-off-by:
Pete Zaitcev <zaitcev@redhat.com> Signed-off-by:
-
david-b@pacbell.net authored
This adds the field tt_usecs to ehci_qh and ehci_iso_stream, and sets it appropriately when setting them up as periodic endpoints. It records the transation translator's think_time (added in last patch) plus the downstream (i.e. low or full speed) bustime of the transfer associated with each interrupt or iso frame, as calculated by usb_calc_bus_time. Signed-off-by:
Dan Streetman <ddstreet@ieee.org> Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
david-b@pacbell.net authored
This adds think_time to the usb_tt struct and sets it appropriately (measured in ns); this can help us implement better split transaction scheduling. Signed-off-by:
-
David Brownell authored
This wraps up the conversion of the "usbnet" driver structure, by moving the Prolific PL-2201/2302 minidriver to a module of its own. It also includes some minor cleanups to the remaining "usbnet" file, notably removing that long changelog at the top. Minor historical note: Linux 2.2 first called the driver for this hardware "plusb". Signed-off-by:
-
David Brownell authored
This adds host-side RNDIS support to the "usbnet" driver, so Linux can talk to various devices (often based on WinCE) that otherwise only Windows could talk to. Tested with little-endian Linux talking to a Linux-USB Ethernet/RNDIS based peripheral. This also includes updates from Eddie C. Dost <ecd@brainaid.de> for big-endian SPARC Linux talking to a Nokia 9500 Communicator. It's still marked as EXPERIMENTAL because this code is so young. This ought to let Linux to work with various cable modems that previously would have been "Windows Only". Signed-off-by:
-
David Brownell authored
Makes the CDC Ethernet support live in a separate driver module. This module is a bit special since it exports utility functions that are reused by the the Zaurus and RNDIS drivers, but it's not "core" like usbnet itself. Signed-off-by:
-
David Brownell authored
This moves usbnet support for Zaurus and compatibles into its own module. Other than exporting a couple of helper functions, this just involved shuffling some code and updating the comments. Signed-off-by:
-
David Brownell authored
This moves the GeneSys GL620USB-A support into its own driver file. It also fixes a "return wrong skb" glitch in the rx unbatching, as recently reported, and adds some missing byteswaps in the special "genelink" headers (so it might now work on big-endian Linux). Signed-off-by:
-
David Brownell authored
As with the "cdc_subset" and "asix" drivers, this just moves the net1080 support into its one driver module. In this case there's a small bit of extra cleanup involved, moving some funky framing logic into the tx_fixup() routine (resolving a long overdue FIXME). Minor historical note: "usbnet" started out as "net1080", then got generalized to make it easier for other network drivers to reuse the urb queueing and fault management code here. Signed-off-by:
-
David Brownell authored
This patch moves the ASIX AX8817x driver into its own file, just using the "usbnet" infrastructure as a utility library. - As with "cdc_subset" this involved minor Kconfig/kbuild tweaks, moving code from one file to another, and exporting a few functions. - This includes updates from Jamie Painter to add (and use) a new hook to handle the different maximum transfer sizes for rx and tx sides. - Also from Jamie, some bugfixes: * MDIO byteorder (to address some PPC media negotiation problems); * Force alignment at key spots when using ax88772 framing (on some embedded hardware, the network stack will break otherwise); * Address some link reset problems. It also makes this driver use the standard (5 seconds vs half second) control timeouts used elsewhere in USB; and wraps a few lines before the 80th column (which previously needed it). Signed-off-by: -
David Brownell authored
This patch creates the first of several separate "minidriver" modules for "usbnet". This one handles only the very simplest hardware, which can be handled almost entirely by the "usbnet" core. - Move device-specific bits into new "cdc_subset.c" driver, shrinking "usbnet" by a bunch; - Export the functions needed to support this minidriver (with EXPORT_SYMBOL_GPL); - Update Kconfig and kbuild accordingly. This one handles about a dozen different device types, with the most notable ones being Gumstix and most Linux-based PDAs (except Zaurus running that ancient code from Sharp). Signed-off-by: -
David Brownell authored
This starts to prepare the core of "usbnet" to know less about various framing protocols that map Ethernet packets onto USB, so "minidrivers" can be modules that just plug into the core. - Remove some framing-specific code that cluttered the core: * net->hard_header_len records how much space to preallocate; now drivers that add their own framing (Net1080, GeneLink, Zaurus, and RNDIS) will have smoother TX paths. Even for the drivers (Zaurus, Net1080) that need trailers. * defines new dev->hard_mtu, using this "hardware" limit to check changes to the link's settable "software" mtu. * now net->hard_header_len and dev->hard_mtu are set up in the driver bind() routines, if needed. - Transaction ID is no longer specific to the Net1080 framing; RNDIS needs one too. - Creates a new "usbnet.h" header with declarations that are shared between the core and what will be separate modules. - Plus a couple other minor tweaks, like recognizing -ESHUTDOWN means the keventd work should just shut itself down asap. The core code is only about 1/3 of this large file. Splitting out the minidrivers into separate modules (e.g. ones for ASIX adapters, Zaurii and similar, CDC Ethernet, etc), in later patches, will improve maintainability and shrink typical runtime footprints. Signed-off-by: -
Alexey Dobriyan authored
Fix drivers/usb/misc/ldusb.c: In function `ld_usb_read': drivers/usb/misc/ldusb.c:467: warning: int format, different type arg (arg 4) drivers/usb/misc/ldusb.c: In function `ld_usb_write': drivers/usb/misc/ldusb.c:531: warning: int format, different type arg (arg 4) drivers/usb/misc/ldusb.c:532: warning: int format, different type arg (arg 5) drivers/usb/misc/ldusb.c:532: warning: int format, different type arg (arg 6) Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Adrian Bunk authored
Deprecate the OSS USB drivers. This patch includes spelling fixes by Lee Revell. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Dale Farnsworth authored
ohci-ppc-soc.c provides for a platform-specific callback mechanism for when the HC is successfully probed or removed. It turned out that none of the 3 platforms using it need this facility. Also the required include/asm-ppc/usb.h has never been accepted. This patch removes the callback feature and the include of <asm/usb.h>. Signed-off-by:
Dale Farnsworth <dale@farnsworth.org> Signed-off-by:
-
david-b@pacbell.net authored
Avoid an annoying message that can appear if devices are disconnected in the middle of a USB scatterlist operation. Message noted in http://bugzilla.kernel.org/show_bug.cgi?id=4373 (but the real issue there seems to be a SCSI level hang). Signed-off-by:
-
david-b@pacbell.net authored
Use a more correct calculation for highspeed bit times. http://bugzilla.kernel.org/show_bug.cgi?id=3604 This sort if thing might start to make a difference now that the high speed periodic scheduler is more complete -- and even getting used. Signed-off-by:
-
Alan Stern authored
This patch (as556) adds support for unbinding the usb_generic "driver". That driver only binds to USB devices, as opposed to interfaces, and it does nothing much besides marking which struct device's go with an overall USB device plus providing suspend/resume methods. Now that users can unbind drivers at will using the sysfs "unbind" attribute, we need a rational way of dealing with USB devices that are no longer under full control of the USB stack. The patch handles this by unconfiguring the device, thereby removing all the interfaces and their associated drivers and children. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Alan Stern authored
This patch (as555) modifies the already-awkward usb_lock_device_for_reset routine in usbcore by adding a timeout. The whole point of the routine is that the caller wants to acquire some semaphores in the wrong order; protecting against the possibility of deadlock by timing out seems only prudent. Signed-off-by:
-
Dale Farnsworth authored
Signed-off-by:
-
Ben Dooks authored
Fix the port numbering confusion for the S3C24XX platform device information as reported by Rudy <rudyboy168@gmail.com> This patch ensurs that the the ports are numbered 0 and 1. Signed-off-by:
Ben Dooks <ben-linux@fluff.org> Signed-off-by:
-
Alan Stern authored
This patch (as554) makes the hub driver disconnect any child USB devices when it is unbound from a hub. Normally this will never happen, but there are a few oddball ways to unbind the hub driver while leaving the children intact. For example, the new "unbind" sysfs attribute can be used for this purpose. Given that unbinding hubs with children is now safe, the patch also removes the code that prevented people from doing so using usbfs. Signed-off-by:
-
Alan Stern authored
This patch (as553) merely moves some code and deletes an unneeded test in the hub driver. This is in preparation for the patch that follows. Signed-off-by:
-
Daniel Drake authored
Adding flash-device support to the shuttle_usbat driver in 2.6.11 introduced the need to detect which type of device we are dealing with: CDRW drive, or flash media reader. The detection routine used turned out to not work for HP8200 CDRW users, who saw their devices being detected as a flash disk. This patch (which has been tested on both flash and cdrom) removes some unnecessary code, moves device detection to much later during initialization, and introduces a new detection routine which appears to work. Signed-off-by:
Daniel Drake <dsd@gentoo.org> Signed-off-by:
-
