- 31 Jan, 2020 40 commits
-
-
Arvind Sankar authored
Since commit 08746a65 ("init: fix in-place parameter modification regression"), parse_args in do_initcall_level is called on a copy of saved_command_line. It is unnecessary to call repair_env_string during this parsing, as this copy is not used for anything later. Remove the now unnecessary arguments from repair_env_string as well. Link: http://lkml.kernel.org/r/20191212180023.24339-3-nivedita@alum.mit.eduSigned-off-by:
Arvind Sankar <nivedita@alum.mit.edu> Cc: Krzysztof Mazur <krzysiek@podlesie.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Arvind Sankar authored
Extend logging in `run_init_process` to also show the arguments and environment that we are passing to init. Link: http://lkml.kernel.org/r/20191212180023.24339-2-nivedita@alum.mit.eduSigned-off-by:
-
Alexey Dobriyan authored
Unmapping whole address space at once with munmap(0, (1ULL<<47) - 4096) or equivalent will create empty coredump. It is silly way to exit, however registers content may still be useful. The right to coredump is fundamental right of a process! Link: http://lkml.kernel.org/r/20191222150137.GA1277@avx2Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Alexey Dobriyan authored
array_size() macro will do overflow check anyway. Link: http://lkml.kernel.org/r/20191222144009.GB24341@avx2Signed-off-by:
-
Alexey Dobriyan authored
Comment says ELF header is "too large to be on stack". 64 bytes on 64-bit is not large by any means. Link: http://lkml.kernel.org/r/20191222143850.GA24341@avx2Signed-off-by:
-
Alexey Dobriyan authored
If some mapping goes past TASK_SIZE it will be rejected by kernel which means no such userspace binaries exist. Mark every such check as unlikely. Link: http://lkml.kernel.org/r/20191215124355.GA21124@avx2Signed-off-by:
-
Alexey Dobriyan authored
"current->mm" pointer is stable in general except few cases one of which execve(2). Compiler can't treat is as stable but it _is_ stable most of the time. During ELF loading process ->mm becomes stable right after flush_old_exec(). Help compiler by caching current->mm, otherwise it continues to refetch it. add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-141 (-141) Function old new delta elf_core_dump 5062 5039 -23 load_elf_binary 5426 5308 -118 Note: other cases are left as is because it is either pessimisation or no change in binary size. Link: http://lkml.kernel.org/r/20191215124755.GB21124@avx2Signed-off-by:
-
Alexey Dobriyan authored
ELF header is read into bprm->buf[] by generic execve code. Save a memcpy and allocate just one header for the interpreter instead of two headers (64 bytes instead of 128 on 64-bit). Link: http://lkml.kernel.org/r/20191208171242.GA19716@avx2Signed-off-by:
-
Alexey Dobriyan authored
Only executable segments should be accounted to ->start_code just like they do to ->end_code (correctly). Link: http://lkml.kernel.org/r/20191208171410.GB19716@avx2Signed-off-by:
-
Alexey Dobriyan authored
Filling auxv vector as array with index (auxv[i++] = ...) generates terrible code. "saved_auxv" should be reworked because it is the worst member of mm_struct by size/usefullness ratio but do it later. Meanwhile help gcc a little with *auxv++ idiom. Space savings on x86_64: add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-127 (-127) Function old new delta load_elf_binary 5470 5343 -127 Link: http://lkml.kernel.org/r/20191208172301.GD19716@avx2Signed-off-by:
-
Yury Norov authored
It saves 25% of .text for arm64, and more for BE architectures. Before: $ size lib/find_bit.o text data bss dec hex filename 1012 56 0 1068 42c lib/find_bit.o After: $ size lib/find_bit.o text data bss dec hex filename 776 56 0 832 340 lib/find_bit.o Link: http://lkml.kernel.org/r/20200103202846.21616-3-yury.norov@gmail.comSigned-off-by:Yury Norov <yury.norov@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Allison Randal <allison@lohutok.net> Cc: William Breathitt Gray <vilhelm.gray@gmail.com> Cc: Joe Perches <joe@perches.com> Signed-off-by:
-
Yury Norov authored
_find_next_bit and _find_next_bit_le are very similar functions. It's possible to join them by adding 1 parameter and a couple of simple checks. It's simplify maintenance and make possible to shrink the size of .text by un-inlining the unified function (in the following patch). Link: http://lkml.kernel.org/r/20200103202846.21616-2-yury.norov@gmail.comSigned-off-by:
-
Yury Norov authored
ext2_swab() is defined locally in lib/find_bit.c However it is not specific to ext2, neither to bitmaps. There are many potential users of it, so rename it to just swab() and move to include/uapi/linux/swab.h ABI guarantees that size of unsigned long corresponds to BITS_PER_LONG, therefore drop unneeded cast. Link: http://lkml.kernel.org/r/20200103202846.21616-1-yury.norov@gmail.comSigned-off-by:
-
Nathan Chancellor authored
Clang warns: ../lib/scatterlist.c:314:5: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] return -ENOMEM; ^ ../lib/scatterlist.c:311:4: note: previous statement is here if (prv) ^ 1 warning generated. This warning occurs because there is a space before the tab on this line. Remove it so that the indentation is consistent with the Linux kernel coding style and clang no longer warns. Link: http://lkml.kernel.org/r/20191218033606.11942-1-natechancellor@gmail.com Link: https://github.com/ClangBuiltLinux/linux/issues/830 Fixes: edce6820 ("scatterlist: prevent invalid free when alloc fails") Signed-off-by:Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Mikhail Zaslonko authored
In order to benefit from s390 zlib hardware compression support, increase the btrfs zlib workspace buffer size from 1 to 4 pages (if s390 zlib hardware support is enabled on the machine). This brings up to 60% better performance in hardware on s390 compared to the PAGE_SIZE buffer and much more compared to the software zlib processing in btrfs. In case of memory pressure, fall back to a single page buffer during workspace allocation. The data compressed with larger input buffers will still conform to zlib standard and thus can be decompressed also on a systems that uses only PAGE_SIZE buffer for btrfs zlib. Link: http://lkml.kernel.org/r/20200108105103.29028-1-zaslonko@linux.ibm.comSigned-off-by:
Mikhail Zaslonko <zaslonko@linux.ibm.com> Reviewed-by:
David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: David Sterba <dsterba@suse.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Eduard Shishkin <edward6@linux.ibm.com> Cc: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by:
-
Mikhail Zaslonko authored
Add a new function to zlib.h checking if s390 Deflate-Conversion facility is installed and enabled. Link: http://lkml.kernel.org/r/20200103223334.20669-6-zaslonko@linux.ibm.comSigned-off-by:
-
Mikhail Zaslonko authored
Add the new kernel command line parameter 'dfltcc=' to configure s390 zlib hardware support. Format: { on | off | def_only | inf_only | always } on: s390 zlib hardware support for compression on level 1 and decompression (default) off: No s390 zlib hardware support def_only: s390 zlib hardware support for deflate only (compression on level 1) inf_only: s390 zlib hardware support for inflate only (decompression) always: Same as 'on' but ignores the selected compression level always using hardware support (used for debugging) Link: http://lkml.kernel.org/r/20200103223334.20669-5-zaslonko@linux.ibm.comSigned-off-by: -
Mikhail Zaslonko authored
Add decompression functions to zlib_dfltcc library. Update zlib_inflate functions with the hooks for s390 hardware support and adjust workspace structures with extra parameter lists required for hardware inflate decompression. Link: http://lkml.kernel.org/r/20200103223334.20669-4-zaslonko@linux.ibm.comSigned-off-by:
Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by:
-
Mikhail Zaslonko authored
Change the conflicting macro name in preparation for zlib_inflate hardware support. Link: http://lkml.kernel.org/r/20200103223334.20669-3-zaslonko@linux.ibm.comSigned-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Mikhail Zaslonko authored
Patch series "S390 hardware support for kernel zlib", v3. With IBM z15 mainframe the new DFLTCC instruction is available. It implements deflate algorithm in hardware (Nest Acceleration Unit - NXU) with estimated compression and decompression performance orders of magnitude faster than the current zlib. This patchset adds s390 hardware compression support to kernel zlib. The code is based on the userspace zlib implementation: https://github.com/madler/zlib/pull/410 The coding style is also preserved for future maintainability. There is only limited set of userspace zlib functions represented in kernel. Apart from that, all the memory allocation should be performed in advance. Thus, the workarea structures are extended with the parameter lists required for the DEFLATE CONVENTION CALL instruction. Since kernel zlib itself does not support gzip headers, only Adler-32 checksum is processed (also can be produced by DFLTCC facility). Like it was implemented for userspace, kernel zlib will compress in hardware on level 1, and in software on all other levels. Decompression will always happen in hardware (when enabled). Two DFLTCC compression calls produce the same results only when they both are made on machines of the same generation, and when the respective buffers have the same offset relative to the start of the page. Therefore care should be taken when using hardware compression when reproducible results are desired. However it does always produce the standard conform output which can be inflated anyway. The new kernel command line parameter 'dfltcc' is introduced to configure s390 zlib hardware support: Format: { on | off | def_only | inf_only | always } on: s390 zlib hardware support for compression on level 1 and decompression (default) off: No s390 zlib hardware support def_only: s390 zlib hardware support for deflate only (compression on level 1) inf_only: s390 zlib hardware support for inflate only (decompression) always: Same as 'on' but ignores the selected compression level always using hardware support (used for debugging) The main purpose of the integration of the NXU support into the kernel zlib is the use of hardware deflate in btrfs filesystem with on-the-fly compression enabled. Apart from that, hardware support can also be used during boot for decompressing the kernel or the ramdisk image With the patch for btrfs expanding zlib buffer from 1 to 4 pages (patch 6) the following performance results have been achieved using the ramdisk with btrfs. These are relative numbers based on throughput rate and compression ratio for zlib level 1: Input data Deflate rate Inflate rate Compression ratio NXU/Software NXU/Software NXU/Software stream of zeroes 1.46 1.02 1.00 random ASCII data 10.44 3.00 0.96 ASCII text (dickens) 6,21 3.33 0.94 binary data (vmlinux) 8,37 3.90 1.02 This means that s390 hardware deflate can provide up to 10 times faster compression (on level 1) and up to 4 times faster decompression (refers to all compression levels) for btrfs zlib. Disclaimer: Performance results are based on IBM internal tests using DD command-line utility on btrfs on a Fedora 30 based internal driver in native LPAR on a z15 system. Results may vary based on individual workload, configuration and software levels. This patch (of 9): Create zlib_dfltcc library with the s390 DEFLATE CONVERSION CALL implementation and related compression functions. Update zlib_deflate functions with the hooks for s390 hardware support and adjust workspace structures with extra parameter lists required for hardware deflate. Link: http://lkml.kernel.org/r/20200103223334.20669-2-zaslonko@linux.ibm.comSigned-off-by:
-
Akinobu Mita authored
This switches the qcom-vadc-common to use milli_kelvin_to_millicelsius() in <linux/units.h>. Link: http://lkml.kernel.org/r/1576386975-7941-13-git-send-email-akinobu.mita@gmail.comSigned-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Acked-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Amit Kucheria <amit.kucheria@verdurent.com> Cc: Andy Shevchenko <andy@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Darren Hart <dvhart@infradead.org> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jean Delvare <jdelvare@suse.com> Cc: Jens Axboe <axboe@fb.com> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Keith Busch <kbusch@kernel.org> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Sujith Thomas <sujith.thomas@intel.com> Cc: Zhang Rui <rui.zhang@intel.com> Signed-off-by:
-
Akinobu Mita authored
This removes unused TO_MCELSIUS() macro. Link: http://lkml.kernel.org/r/1576386975-7941-12-git-send-email-akinobu.mita@gmail.comSigned-off-by:
-
Akinobu Mita authored
This switches the iwlwifi driver to use celsius_to_kelvin() and kelvin_to_celsius() in <linux/units.h>. Link: http://lkml.kernel.org/r/1576386975-7941-11-git-send-email-akinobu.mita@gmail.comSigned-off-by:
Luca Coelho <luciano.coelho@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Amit Kucheria <amit.kucheria@verdurent.com> Cc: Andy Shevchenko <andy@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Darren Hart <dvhart@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Jean Delvare <jdelvare@suse.com> Cc: Jens Axboe <axboe@fb.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Keith Busch <kbusch@kernel.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Sujith Thomas <sujith.thomas@intel.com> Cc: Zhang Rui <rui.zhang@intel.com> Signed-off-by:
-
Akinobu Mita authored
This switches the iwlegacy driver to use celsius_to_kelvin() and kelvin_to_celsius() in <linux/units.h>. [akinobu.mita@gmail.com: fix build warnings with format string] Link: http://lkml.kernel.org/r/1579014483-9226-1-git-send-email-akinobu.mita@gmail.com Link: https://lore.kernel.org/r/20200106171452.201c3b4c@canb.auug.org.au Link: http://lkml.kernel.org/r/1576386975-7941-10-git-send-email-akinobu.mita@gmail.comSigned-off-by:
Kalle Valo <kvalo@codeaurora.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Amit Kucheria <amit.kucheria@verdurent.com> Cc: Andy Shevchenko <andy@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Darren Hart <dvhart@infradead.org> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Jean Delvare <jdelvare@suse.com> Cc: Jens Axboe <axboe@fb.com> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Keith Busch <kbusch@kernel.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Sujith Thomas <sujith.thomas@intel.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Akinobu Mita authored
This removes the kelvin to/from Celsius conversion helper macros in <linux/thermal.h> which were switched to the inline helper functions in <linux/units.h>. Link: http://lkml.kernel.org/r/1576386975-7941-9-git-send-email-akinobu.mita@gmail.comSigned-off-by:
-
Akinobu Mita authored
This switches the nvme driver to use kelvin_to_millicelsius() and millicelsius_to_kelvin() in <linux/units.h>. Link: http://lkml.kernel.org/r/1576386975-7941-8-git-send-email-akinobu.mita@gmail.comSigned-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
Keith Busch <kbusch@kernel.org> Reviewed-by:
-
Akinobu Mita authored
This switches the intel pch thermal driver to use deci_kelvin_to_millicelsius() in <linux/units.h> instead of helpers in <linux/thermal.h>. This is preparation for centralizing the kelvin to/from Celsius conversion helpers in <linux/units.h>. Link: http://lkml.kernel.org/r/1576386975-7941-7-git-send-email-akinobu.mita@gmail.comSigned-off-by:
-
Akinobu Mita authored
This switches the int340x thermal zone driver to use deci_kelvin_to_millicelsius() and millicelsius_to_deci_kelvin() in <linux/units.h> instead of helpers in <linux/thermal.h>. This is preparation for centralizing the kelvin to/from Celsius conversion helpers in <linux/units.h>. Link: http://lkml.kernel.org/r/1576386975-7941-6-git-send-email-akinobu.mita@gmail.comSigned-off-by:
-
Akinobu Mita authored
This switches the intel_menlow driver to use deci_kelvin_to_celsius() and celsius_to_deci_kelvin() in <linux/units.h> instead of helpers in <linux/thermal.h>. This is preparation for centralizing the kelvin to/from Celsius conversion helpers in <linux/units.h>. This also removes a trailing space, while we're at it. Link: http://lkml.kernel.org/r/1576386975-7941-5-git-send-email-akinobu.mita@gmail.comSigned-off-by:
-
Akinobu Mita authored
The asus-wmi driver doesn't implement the thermal device functionality directly, so including <linux/thermal.h> just for DECI_KELVIN_TO_CELSIUS() is a bit odd. This switches the asus-wmi driver to use deci_kelvin_to_millicelsius() in <linux/units.h>. The format string is changed from %d to %ld due to function returned type. Link: http://lkml.kernel.org/r/1576386975-7941-4-git-send-email-akinobu.mita@gmail.comSigned-off-by:
-
Akinobu Mita authored
This switches the ACPI thermal zone driver to use celsius_to_deci_kelvin(), deci_kelvin_to_celsius(), and deci_kelvin_to_millicelsius_with_offset() in <linux/units.h> instead of helpers in <linux/thermal.h>. This is preparation for centralizing the kelvin to/from Celsius conversion helpers in <linux/units.h>. Link: http://lkml.kernel.org/r/1576386975-7941-3-git-send-email-akinobu.mita@gmail.comSigned-off-by:
-
Akinobu Mita authored
Patch series "add header file for kelvin to/from Celsius conversion helpers", v4. There are several helper macros to convert kelvin to/from Celsius in <linux/thermal.h> for thermal drivers. These are useful for any other drivers or subsystems, but it's odd to include <linux/thermal.h> just for the helpers. This adds a new <linux/units.h> that provides the equivalent inline functions for any drivers or subsystems, and switches all the users of conversion helpers in <linux/thermal.h> to use <linux/units.h> helpers. This patch (of 12): There are several helper macros to convert kelvin to/from Celsius in <linux/thermal.h> for thermal drivers. These are useful for any other drivers or subsystems, but it's odd to include <linux/thermal.h> just for the helpers. This adds a new <linux/units.h> that provides the equivalent inline functions for any drivers or subsystems. It is intended to replace the helpers in <linux/thermal.h>. Link: http://lkml.kernel.org/r/1576386975-7941-2-git-send-email-akinobu.mita@gmail.comSigned-off-by:
-
Colin Ian King authored
Currently when an error code -EIO or -ENOSPC in the for-loop of writeback_store the error code is being overwritten by a ret = len assignment at the end of the function and the error codes are being lost. Fix this by assigning ret = len at the start of the function and remove the assignment from the end, hence allowing ret to be preserved when error codes are assigned to it. Addresses Coverity ("Unused value") Link: http://lkml.kernel.org/r/20191128122958.178290-1-colin.king@canonical.com Fixes: a939888e ("zram: support idle/huge page writeback") Signed-off-by:Colin Ian King <colin.king@canonical.com> Acked-by:
Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Taejoon Song authored
The worst-case scenario on finding same element pages is that almost all elements are same at the first glance but only last few elements are different. Since the same element tends to be grouped from the beginning of the pages, if we check the first element with the last element before looping through all elements, we might have some chances to quickly detect non-same element pages. 1. Test is done under LG webOS TV (64-bit arch) 2. Dump the swap-out pages (~819200 pages) 3. Analyze the pages with simple test script which counts the iteration number and measures the speed at off-line Under 64-bit arch, the worst iteration count is PAGE_SIZE / 8 bytes = 512. The speed is based on the time to consume page_same_filled() function only. The result, on average, is listed as below: Num of Iter Speed(MB/s) Looping-Forward (Orig) 38 99265 Looping-Backward 36 102725 Last-element-check (This Patch) 33 125072 The result shows that the average iteration count decreases by 13% and the speed increases by 25% with this patch. This patch does not increase the overall time complexity, though. I also ran simpler version which uses backward loop. Just looping backward also makes some improvement, but less than this patch. [taejoon.song@lge.com: fix off-by-one] Link: http://lkml.kernel.org/r/1578642001-11765-1-git-send-email-taejoon.song@lge.com Link: http://lkml.kernel.org/r/1575424418-16119-1-git-send-email-taejoon.song@lge.comSigned-off-by:Taejoon Song <taejoon.song@lge.com> Acked-by:
-
Hao Lee authored
As zone reclaim has been replaced by node reclaim, this patch fixes related comments. Link: http://lkml.kernel.org/r/20191126141346.GA22665@haolee.github.ioSigned-off-by:
Hao Lee <haolee.swjtu@gmail.com> Reviewed-by:
-
Anshuman Khandual authored
memory_block structure elements 'hw' and 'phys_callback' are not getting used. This was originally added with commit 3947be19 ("[PATCH] memory hotplug: sysfs and add/remove functions") but never seem to have been used. Just drop them now. Link: http://lkml.kernel.org/r/1576728650-13867-1-git-send-email-anshuman.khandual@arm.comSigned-off-by:
Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by:
Dan Williams <dan.j.williams@intel.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Signed-off-by:
-
Wei Yang authored
totalram_pages_set() was introduced in commit ca79b0c2 ("mm: convert totalram_pages and totalhigh_pages variables to atomic"), but no one uses it. Link: http://lkml.kernel.org/r/20191218005543.24146-1-richardw.yang@linux.intel.comSigned-off-by:
Wei Yang <richardw.yang@linux.intel.com> Reviewed-by:
-
Yu Zhao authored
The check was intended to make sure we don't overrun page flags. But it's obsolete because it doesn't include LAST_CPUPID_WIDTH nor KASAN_TAG_WIDTH. Just remove check since we already have it covered in linux/page-flags-layout.h (near the end of the file). Link: http://lkml.kernel.org/r/20191208183508.89177-1-yuzhao@google.comSigned-off-by:
Yu Zhao <yuzhao@google.com> Reviewed-by:
-
Dan Carpenter authored
The "pool" pointer can be NULL at the end of the init_zswap(). (We would allocate a new pool later in that situation) So in the error handling then we need to make sure pool is a valid pointer before calling "zswap_pool_destroy(pool);" because that function dereferences the argument. Link: http://lkml.kernel.org/r/20200114050902.og32fkllkod5ycf5@kili.mountain Fixes: 93d4dfa9fbd0 ("mm/zswap.c: add allocation hysteresis if pool limit is hit") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Vitaly Wool <vitaly.wool@konsulko.com> Signed-off-by:
-
Vitaly Wool authored
zswap will always try to shrink pool when zswap is full. If there is a high pressure on zswap it will result in flipping pages in and out zswap pool without any real benefit, and the overall system performance will drop. The previous discussion on this subject [1] ended up with a suggestion to implement a sort of hysteresis to refuse taking pages into zswap pool until it has sufficient space if the limit has been hit. This is my take on this. Hysteresis is controlled with a sysfs-configurable parameter (namely, /sys/kernel/debug/zswap/accept_threhsold_percent). It specifies the threshold at which zswap would start accepting pages again after it became full. Setting this parameter to 100 disables the hysteresis and sets the zswap behavior to pre-hysteresis state. [1] https://lkml.org/lkml/2019/11/8/949 Link: http://lkml.kernel.org/r/20200108200118.15563-1-vitaly.wool@konsulko.comSigned-off-by:
Vitaly Wool <vitaly.wool@konsulko.com> Cc: Dan Streetman <ddstreet@ieee.org> Signed-off-by:
-
