- 22 May, 2012 14 commits
-
-
Ricardo Neri authored
Expand the configuration of the hw_params to include the IEC-60958 channel status word and the CEA-861 audio infoframe. The configuration of such structures depends on the snd_pcm_hw_params received. A omap_dss_audio is used to pass the configuration parameters to DSS. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
-
Ricardo Neri authored
Instead of accessing the HDMI IP directly, the CPU DAI driver takes advantage of the audio interface provided by the DSS device driver. The ASoC driver will link the DSS audio functionality with ALSA by calling the appropriate DSS device driver functions at the relevant moments. For this, three new DAI operations are added: trigger, prepare and shutdown operations. At the moment, it is assumed that only one HDMI display is available in the system, as it is the case in OMAP4. However, in the future, one DAI for each HDMI display should be provided. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
-
Ricardo Neri authored
Create a struct hdmi_priv to store the relevant data of the CPU DAI driver. As more data is added to the driver, having all the data in the same location eases its handling. At the moment, only the DMA configuration parameters are included in the structure. Also, the required memory is allocated using devm_kzalloc rather than using a static global variable. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
-
Ricardo Neri authored
When getting the needed resources fails, return -ENODEV. This is more in line with other drivers do and it gives a more descriptive error. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
-
Ricardo Neri authored
In order to utilize the new OMAP HDMI codec and the updated name of the device of the CPU DAI, update the names at the drivers accordingly. While there, also update the name of the machine driver to be more generic and encompass more OMAP processors featuring HDMI and not only OMAP4. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
-
Peter Ujfalusi authored
In preparation to Device Tree support. With DT booted kernel we can not rely on pdata which used to hold information needed for the driver at runtime. Use the card's driver data to hold these informations from now on. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
-
Peter Ujfalusi authored
The needed change in routing will be done runtime for the non twl6040 connected widgets, like the Digital microphone. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
-
Peter Ujfalusi authored
There is no need to have two snd_soc_dai_link structure for the two setup the machine driver supports. We can just tell core to register only the first link if the DMIC link is not in use on the device. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
-
Peter Ujfalusi authored
Device tree support for OMAP4+ dmic cpu dai driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
-
Peter Ujfalusi authored
Device tree support for OMAP4+ McPDM cpu dai driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
-
Peter Ujfalusi authored
In capture stream the buffer size does not need to be constrained to be bigger then the McBSP FIFO. In capture the FIFO content is taken out in period length burst, this enusres that the FIFO is not going to overflow. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
-
Peter Ujfalusi authored
With the common irq the driver only needs to use one interrupt line, and it provides better debugging possibilites compared to the legacy TX/RX interrupt lines. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
-
Peter Ujfalusi authored
The frame dma_op_mode has never been used, and it is just creating confusion for users/developers. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
-
Peter Ujfalusi authored
Take the DMA packet mode into use when the McBSP is configured in element dma_op_mode if the stream is not mono. In this way we transfer one sample from/to McBSP FIFO upon DMA request. This change only affects OMAP3+ versions, where the McBSP ports have FIFO. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
-
- 19 May, 2012 6 commits
-
-
Kuninori Morimoto authored
SupherH FSI2 can use special data transfer, but it depends on CPU-FSI2 connection style. We can use 16bit data stream mode if it was valid connection, and it is required for 16bit data DMA transfer / SPDIF sound output. We can use 24bit data transfer if it was invalid connection. We can select connection type if CPU is SH7372, and it is always valid connection if latest SuperH. This patch adds new bus_option and fsi_bus_setup() for supporting these feature. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Kuninori Morimoto authored
fsi_hw_startup/shutdown() needs the setup of bus width, but it is impossible to get parameter of snd_pcm_runtime at this timing. So, these functions are changed so that be called from fsi_dai_trigger(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Kuninori Morimoto authored
This patch adds fsi_version() function for accessing version. And there were some meaningless version check which never hit. This patch removed it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Stephen Warren authored
One such machine is Whistler. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 18 May, 2012 8 commits
-
-
Ricardo Neri authored
Introduce codec for HDMI. At the moment, this is a dummy codec. In the future it will parse the EDID to modify the supported parameters, such as the number of channels and the sample rates. At the moment, it blindly supports all the sample rates and audio channels described in the HDMI 1.4a specification. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Philippe Rétornaz authored
Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Philippe Rétornaz authored
Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Philippe Rétornaz authored
Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Philippe Rétornaz authored
Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Philippe Rétornaz authored
Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Philippe Rétornaz authored
Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Philippe Rétornaz authored
Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 16 May, 2012 1 commit
-
-
Stephen Warren authored
Commit 4924082 "ASoC: core: Flip master for CODECs in the CPU slot of a CODEC<->CODEC link" added code that was conditional on there being no PCM/DMA driver for the link. However, it failed to cover the case where the link was instantiated from device tree, and hence was specified by DT node rather than name. This prevents the following error on Toshiba AC100: aplay: pcm_write:1603: write error: Input/output error Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 14 May, 2012 2 commits
-
-
Mark Brown authored
Supports regmap conversion. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
aic3x_set_headset_detection() isn't made available outside the driver or referenced within the driver which sparse notices and complains about. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 13 May, 2012 8 commits
-
-
Mark Brown authored
In preparation for irq_domain support change the code to the not switch based on the irq number. This actually makes things simpler, if slightly repetitive. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
There's no space for the sign bit. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
Linux 3.4-rc7 Conflicts): drivers/base/regmap/regmap.c (overlap with bug fixes) sound/soc/blackfin/bf5xx-ssm2602.c (overlap with bug fixes)
-
Linus Torvalds authored
.. and this should hopefully be the last -rc before final 3.4 release.
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM: SoC fixes from Olof Johansson: "I was hoping to be done with fixes for 3.4 but we got two branches from subarch maintainers the last couple of days. So here is one last(?) pull request for arm-soc containing 7 patches: - Five of them are for shmobile dealing with SMP setup and compile failures - The remaining two are for regressions on the Samsung platforms" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: EXYNOS: fix ctrlbit for exynos5_clk_pdma1 ARM: EXYNOS: use s5p-timer for UniversalC210 board ARM / mach-shmobile: Invalidate caches when booting secondary cores ARM / mach-shmobile: sh73a0 SMP TWD boot regression fix ARM / mach-shmobile: r8a7779 SMP TWD boot regression fix ARM: mach-shmobile: convert ag5evm to use the generic MMC GPIO hotplug helper ARM: mach-shmobile: convert mackerel to use the generic MMC GPIO hotplug helper
-
git://git.secretlab.ca/git/linux-2.6Linus Torvalds authored
Pull a few more GPIO bug fixes from Grant Likely: "Oops, missed a couple. Here's an updated pull req for GPIO" A set of PCH bug fixes, and one patch to fix up compile warnings * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6: gpio/exynos: Fix compiler warnings when non-exynos machines are selected gpio: pch9: Use proper flow type handlers
-
- 12 May, 2012 1 commit
-
-
Olof Johansson authored
Merge branch 'v3.4-samsung-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes * 'v3.4-samsung-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: fix ctrlbit for exynos5_clk_pdma1 ARM: EXYNOS: use s5p-timer for UniversalC210 board
-