- 19 Jan, 2017 30 commits
-
-
James Simmons authored
Change lstio_debug_args_t from typedef to proper structure. Signed-off-by:
James Simmons <uja.ornl@yahoo.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142 Reviewed-on: https://review.whamcloud.com/24188Reviewed-by:
Andreas Dilger <andreas.dilger@intel.com> Reviewed-by:
Doug Oucharek <doug.s.oucharek@intel.com> Signed-off-by:
James Simmons <jsimmons@infradead.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
James Simmons authored
Change lstio_session_end_args_t from typedef to proper structure. Signed-off-by:
-
James Simmons authored
Change lstio_session_info_args_t from typedef to proper structure. Signed-off-by:
-
James Simmons authored
Change lstio_session_new_args_t from typedef to proper structure. Signed-off-by:
-
James Simmons authored
Change lstcon_trans_stat_t from typedef to proper structure. Signed-off-by:
-
James Simmons authored
Change lstcon_rpc_ent_t from typedef to proper structure. Signed-off-by:
-
James Simmons authored
Change lstcon_test_batch_ent_t from typedef to proper structure. Signed-off-by:
-
James Simmons authored
Change lstcon_batch_ent_t from typedef to proper structure. Signed-off-by:
-
James Simmons authored
Change lstcon_test_ent_t from typedef to proper structure. Signed-off-by:
-
James Simmons authored
Change lstcon_ndlist_ent_t from typedef to proper structure. Signed-off-by:
-
James Simmons authored
Change lstcon_node_ent_t from typedef to proper structure. Signed-off-by:
-
James Simmons authored
Change lst_bid_t from typedef to proper structure. Signed-off-by:
-
James Simmons authored
Change lst_nid_t from typedef to proper structure. Signed-off-by:
-
Phil Elwell authored
The constants MAX_COMPLETIONS and MSG_QUEUE_SIZE control the number of messages that can be outstanding to each client before the system as a whole stalls. If the numbers are too small then unnecessary thread switching will occur while waiting for a (potentially low priority) client thread to consume some data; badly written clients can even lead to deadlock. For services that carry many short messages, 16 messages can represent a very small amount of data. Since the resources are small - 16 bytes for a completion, 4 bytes for a message pointer - increase the limits so they are unlikely to be hit except in exceptional circumstances. Signed-off-by:
Phil Elwell <phil@raspberrypi.org> Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
-
Phil Elwell authored
An issue was observed when flushing openmax components which generate a large number of messages returning buffers to host. We occasionally found a duplicate message from 16 messages prior, resulting in a buffer returned twice. So fix the issue by adding more memory barriers. Signed-off-by:
-
Phil Elwell authored
Service callbacks are not allowed to return an error. The internal callback that delivers events and messages to user tasks does not enqueue them if the service is closing, but this is not an error and should not be reported as such. Signed-off-by:
-
Phil Elwell authored
The dequeue_pending flag wasn't protected by a spinlock in the service_callback. So fix this to make it safe. Signed-off-by:
-
Phil Elwell authored
This reduces the memory dump size to a sufficient value of 16 bytes. Signed-off-by:
-
Vaibhav Agarwal authored
Proper byte order was completely disregarded for multi byte data shared between AP and module (and APB1). Fix this. Signed-off-by:
Vaibhav Agarwal <vaibhav.agarwal@linaro.org> Signed-off-by:
Vaibhav Agarwal <vaibhav.sr@gmail.com> Acked-by:
Mark Greer <mgreer@animalcreek.com> Signed-off-by:
-
Vaibhav Agarwal authored
Dummy codec register were initially added while populating dummy codec mixer controls until module topology parser was available. Now, these dummy registers are nowhere used and thus can be safely removed. Since ASoC framework requires a valid callback for both read & write register APIS, currently empty placeholders are kept to avoid panic. Later, register mapping logic can be defined: 1. Assuming fixed number of maximum modules connected and register bits corresponds to basic info of each module OR 2. With a logic to dynamically grow register_cache_size based on codec modules added/removed. Signed-off-by:
-
Vaibhav Agarwal authored
Uninitialized variable sig_bits was used while configuring stream params for codec module. These params are used to configure PCM settings for APBridgeA. Usually, this is dependent on codec capability and thus populated via codec dai_driver definition. In our case, it is fixed to 16 based on the data format, container supported. Signed-off-by:
-
Vaibhav Agarwal authored
mixer control->info call back function checks for -ve values to rebase min and max values. However, le32 variable is used to fetch values from GB module FW. Thus negative value checking is not required. Fix this!! Signed-off-by:
-
Igor Pylypiv authored
checkpatch.pl warning: Symbolic permissions are not preferred. Consider using octal permissions. Signed-off-by:
Igor Pylypiv <igor.pylypiv@gmail.com> Reviewed-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Stefano Manni authored
Following error detected by checkpatch.pl: ERROR: Use 4 digit octal (0777) not decimal permissions Signed-off-by:
Stefano Manni <stefano.manni@gmail.com> Signed-off-by:
-
Pierre-Yves Kerbrat authored
len was declared unsigned int where we use an int Fix sparse (-Wtypesign) issues: drivers/staging/rtl8188eu/core/rtw_ieee80211.c:1081:88: warning: incorrect type in argument 3 (different signedness) drivers/staging/rtl8188eu/core/rtw_ieee80211.c:1081:88: expected int *len drivers/staging/rtl8188eu/core/rtw_ieee80211.c:1081:88: got unsigned int *<noident> drivers/staging/rtl8188eu/core/rtw_ieee80211.c:1091:86: warning: incorrect type in argument 3 (different signedness) drivers/staging/rtl8188eu/core/rtw_ieee80211.c:1091:86: expected int *len drivers/staging/rtl8188eu/core/rtw_ieee80211.c:1091:86: got unsigned int *<noident> Signed-off-by:
Pierre-Yves Kerbrat <pkerbrat@free.fr> Signed-off-by:
-
Pierre-Yves Kerbrat authored
wpa_ielen was declared u32 when we actually use an int Fix sparse (-Wtypesign) issues: drivers/staging/rtl8188eu/core/rtw_ieee80211.c:1008:60: warning: incorrect type in argument 2 (different signedness) drivers/staging/rtl8188eu/core/rtw_ieee80211.c:1008:60: expected int *wpa_ie_len drivers/staging/rtl8188eu/core/rtw_ieee80211.c:1008:60: got unsigned int *<noident> drivers/staging/rtl8188eu/core/rtw_ieee80211.c:1021:69: warning: incorrect type in argument 2 (different signedness) Signed-off-by:
-
Abdul Rauf authored
Fix the following warnings: Block comments should align the * on each line Signed-off-by:
Abdul Rauf <abdulraufmujahid@gmail.com> Signed-off-by:
-
Ian Abbott authored
Add support for NI PXI-6220, PXI-6221, PXI-6229, PXI-6250, PXI-6254, PXI-6259, PXIe-6259, PXI-6280, PXI-6284, and PXI-6289 boards, treating them the same as the correspondingly numbered PCI and PCIe boards (apart from having different Comedi board name strings). The same has previously been done for other PXI boards supported by the driver. The PCI device IDs for the newly supported boards come from the "nixswv.inf" file in National Instrument's Windows drivers. Also, sort `ni_pcimio_pci_table[]` by PCI device ID. It is mostly sorted already, so only the entries for PXI-6251 and PXIe-6251 need moving. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Ian Abbott authored
Add support for the NI PCI-6224 board, assuming it behaves like the NI PXI-6224 board at the register level. The PCI device ID comes from the "nitiowv.inf" file in National Instrument's Windows drivers. Signed-off-by:
-
Greg Kroah-Hartman authored
Merge tag 'iio-for-4.11a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First round of new device support, features and cleanups for IIO in the 4.11 cycle. It's shaping to be another fairly busy cycle. Lots more on the way! New device support * ads7950 - new driver supporting ads7950, ads7951, ads7952, ads7953, ads7954, ads7955, ads7956, ads7957, ads7958, ads7959, ads7960, and ads7961 ADCs. * cm3605 - New driver for this light sensor and proximity sensor which is an analog part with some additional digital controls. * hx711 - New driver. Core new stuff * Gravity sensor type. This is a processed datastream in which the device will try to work out which way is down. * Split the buffer.h file into two parts. One provides the interface to 'use' a buffer, the second provides the internals of the buffer functionality as needed by implementations of buffers. - Move documentation inline so as to allow use of private: tag when generating documentation. - Add some utility functions for the few things that are directly done with the buffers. - Stop exporting functions that no-one uses outside of the core code. - Push docs down by the code in the c file where they should have always been. - Fix typo in kernel-doc for buffer. - push down some includes that were previously happening implicitly. - stop enabling the timestamp of the dummy device. Features and cleanups * ad5592r - ACPI support * ad5593r -ACPI support. * ad5933 - Fix a false comment about size of a particular register. * ad7150 - replace S_IRUGO | S_IWUSR with 0644. I'm not that keen on these patches in general, but as it was nicely presented I took this one anyway. As a general rule will only take these as part of a larger driver cleanup. - don't eat an error but rather reutnr it in the write_event_config callback. * ad7606 - replace non standard range attibute with _scale * ade7753 - use usleep_range for short sleeps * ade7754 - use usleep_range for short sleeps * ade7758 - use usleep_range for short sleeps * ade7759 - use usleep_range for short sleeps * ade7854 - use usleep_range for short sleeps * adis16201 - fix description * adis16203 - fix description - fix copyright year * adis16209 - fix description * adt7316 - Add braces to arms of if else statement (for consistency) - Alignment fixes. * axp288 - Fix up an issue with accidental overwrites of data. * bmi160 - add deivce tables for i2c and spi to support correctly identifying the full dt name (including manufacturer). - device tree binding. * bmp280 - use usleep_range for short sleeps. * cm3232 - return error from cm3232_reg_init rather than eating it if the last write fails. * dummy driver - remove a semicolor found at end of a function defintition. * exynos-adc - use usleep_range for short sleeps. * hid-sensor (accel) - Add timestamp support. The hardware can provide timestamps so lets support them. If not fall back to timestamps estimated in kernel. * hid-sensor (light) - Add a duplicate ID for the light channels so as to keep existing interface whilst also using the more standard IIO interface. * hts221 - acpi probing * imx25-gcq - Add a macro call to allow this driver to be automatically loaded. * isl29028 - reorganise code to avoid deep nesting of if statements. - move chip test and default regs into a function suitable or sharing with power management code. - tidy up some code alignment. * lidar-lite-v3 - introduce compatible strings that make it clear Garmin have consideral friends. * mma8452 - avoid returning signed value when unsigned is appropriate * spmi-vadc - Update function for generic voltage conversion to take into account that different channels on this device should be handled differently. - Rework code to allow per channel voltage scaling and support the standard options for this hardware. - Fixup three minor issues with the above patches for this part. These all effect test builds rather than the native builds for the part, but good to clean them up anyway. * st_sensors - support device matching from the ACPI DST tables. - acpi based probing for accelerometers - acpi based probing for pressure sensors - Allow pressure sensors to read negative values. - Export sampling frequency for lps25h and lps331ap. - Add support for the old DT bindings from the period when these deivces were often supported through windows. Docs fixup: * typo in sysfs-bus-iio
-
- 16 Jan, 2017 10 commits
-
-
Ivan Safonov authored
Value of rx_head member of struct recv_frame does not used. Remove it. Signed-off-by:
Ivan Safonov <insafonov@gmail.com> Signed-off-by:
-
Ivan Safonov authored
Trace output for each received packet in rtw_recv_indicatepkt() is redudant. Remove it. Signed-off-by:
-
Ivan Safonov authored
wifidirect_info structure is unused. Big amount of another definitions used only for wifidirect_info definition. Remove all. Signed-off-by:
-
Ivan Safonov authored
get_rxmem() is not unused, remove it. Signed-off-by:
-
Ivan Safonov authored
EOR macro is not unused, remove it. Signed-off-by:
-
Ivan Safonov authored
WPA_(GET|PUT)_(BE|LE)_xx macros are unused, remove it. Signed-off-by:
-
Ivan Safonov authored
(GET|PUT)U32 macros are unused, remove it. Signed-off-by:
-
Bogdan Purcareata authored
Populate header function signatures with variable names as well, not just variable types. Signed-off-by:
Bogdan Purcareata <bogdan.purcareata@gmail.com> Signed-off-by:
-
Bogdan Purcareata authored
Fix missing space right before multiple line comment closing. Signed-off-by:
-
Bogdan Purcareata authored
Return statements are superfluous in void functions, and checkpatch complains about them too. Remove offending return. Signed-off-by:
-
