- 03 Apr, 2009 40 commits
-
-
Moritz Muehlenhoff authored
Signed-off-by: Moritz Muehlenhoff <jmm@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Moritz Muehlenhoff authored
This patch removes the ieee2host16(), ieee2host32(), host2ieee16() and host2ieee32() macros and replaces them with the generic ones. Signed-off-by: Moritz Muehlenhoff <jmm@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Moritz Muehlenhoff authored
Remove the ugly DBFENTER/DBFEXIT macros, which are only inserted to add "<---" and "--->" at the function start/end at higher debug levels and which make the code a lot less readable. Signed-off-by: Moritz Muehlenhoff <jmm@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Moritz Muehlenhoff authored
Move version identifier into p80211netdev.h and rename it to 0.3.0-staging to differentiate from the out-of-tree version. Also remove the unused wlan_ethconv declaration. Signed-off-by: Moritz Muehlenhoff <jmm@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Moritz Muehlenhoff authored
The header files contain a few comments, which describe the function of the header element. Remove them where not needed. Signed-off-by: Moritz Muehlenhoff <jmm@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Moritz Muehlenhoff authored
Replace the driver local WLAN_ADDR_LEN constant through the kernel-wide ETH_ALEN definiton. Signed-off-by: Moritz Muehlenhoff <jmm@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Moritz Muehlenhoff authored
Replace all ocurrances of the __WLAN_ATTRIB_PACK__ from wlan_compat.h by __attribute__((packed)) and remove it afterwards. Signed-off-by: Moritz Muehlenhoff <jmm@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Pekka Enberg authored
The gl_80211.h header file contains only two definitions that are actually used. Move them to mds_s.h and remove the otherwise unused file. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Pekka Enberg authored
The ds_tkip.h header file contains declarations of a function that is not actually defined anywhere. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Pavel Machek <pavel@ucw.cz>
-
Pekka Enberg authored
The bssdscpt.h header file contains definitions that are not actually used for anything. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Pekka Enberg authored
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Pekka Enberg authored
As this typedef is used everywhere in the driver, remove it in a separate patch. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Pekka Enberg authored
This patch removes some typedefs from the driver code. I also removed some unused structs I spotted while removing the typedefs. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Pekka Enberg authored
The only remaining thing in common.h header file is the WBDEBUG() macro which is unconditionally defined as printk(). Kill the macro and remove the header file. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Pekka Enberg authored
The DebugUsbdStatusInformation macro doesn't do anything useful so remove the definition and the two users of it from driver code. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Pekka Enberg authored
As suggested by Harvey Harrison, convert driver to use ETH_ALEN and kill a private macro from common.h that is used for the same thing. Acked-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Pekka Enberg authored
No need to keep function definitions separate from the rest so unify mto.h and mto_f.h header files. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Pekka Enberg authored
I have no idea why the driver would want to include OpenGL headers in the first place but lets just remove the crazy includes. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Pekka Enberg authored
Convert code to include sysdef.h directly and remove unnecessary os_common.h header file. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Pekka Enberg authored
The header files are not included anywhere so we can just remove them. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Andre Haupt authored
This fixes some errors reported by checkpatch.pl Signed-off-by: Andre Haupt <andre@bitwigglers.org> Cc: Jakub Schmidtke <sjakub@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Andre Haupt authored
Signed-off-by: Andre Haupt <andre@bitwigglers.org> Cc: Jakub Schmidtke <sjakub@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Andre Haupt authored
fix the following error reported by checkpatch.pl ERROR: trailing statements should be on next line Signed-off-by: Andre Haupt <andre@bitwigglers.org> Cc: Jakub Schmidtke <sjakub@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Andre Haupt authored
fix the following error reported by checkpatch.pl ERROR: do not initialise statics to 0 or NULL Signed-off-by: Andre Haupt <andre@bitwigglers.org> Cc: Jakub Schmidtke <sjakub@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Andre Haupt authored
Signed-off-by: Andre Haupt <andre@bitwigglers.org> Cc: Jakub Schmidtke <sjakub@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Mithlesh Thukral authored
Add support for downloading the firmware using kernel-builtin mechanism. This will remove the need for the firmware files in the driver source code. Signed-off-by: Christopher Harrer <charrer@alacritech.com> Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Mithlesh Thukral authored
Add a watchdog timer to take care of link change notifications. Link changes would now be handled asynchronously as they involve large delays. Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com> Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Mithlesh Thukral authored
Fix a softlock warning message thrown up by the rtnl_timer. This was observed during the LTP tests (interface up/down test) Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com> Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Mithlesh Thukral authored
Read the correct MAC address from EEPROM/Flash. Without this fix, all the interfaces were using the same MAC address. This works on Rev B firmware. Signed-off-by: Christopher Harrer <charrer@alacritech.com> Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Mithlesh Thukral authored
Fix the problem of the interface not working after a sequence of up-down-up events. The problem was observed only on systems where the card was using MSI-X interrupts. On the second time open, the driver did not request MSI-X vector but was trying to use normal interrupts. Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com> Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Mithlesh Thukral authored
* Update the module name in Kconfig help section. This is a classic case of documentation keeping out of pace with development And this was overlooked by me ages ago when we had fixed the Makefile for sxg_ethtool to compile. Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com> Cc: Christopher Harrer <charrer@alacritech.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Mithlesh Thukral authored
* The receive rings were getting allocated twice. Once at probe time and once at open time. This leaked huge amounts of memory. Fix this leak and now allocation is done only once. Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com> Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Mithlesh Thukral authored
* This patch adds support for controling checksum feature using the ethtool interface. Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com> Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Mithlesh Thukral authored
Remove the deprecated microcode which was for Rev A. Now on the driver will use Rev B microcode only. Signed-off-by: Michael Miles <mmiles@alacritech.com> Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Mithlesh Thukral authored
This patch makes the Sahara SXG driver use Rev B firmware instead of Rev A. The firmware version is 1.71 Signed-off-by: Michael Miles <mmiles@alacritech.com> Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Mithlesh Thukral authored
This patch adds the new firmware files required by Rev B cards. Signed-off-by: Michael Miles <mmiles@alacritech.com> Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Mithlesh Thukral authored
* Fix a memory leak if allocation of skb fails in sxg_fill_descriptor_block. In sxg_fill_descriptor_block(), if allocation of skb failed in loop, we just came out shouting. This rollbacks all the successful operation before skb allocation fails and then returns. Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com> Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Mithlesh Thukral authored
* This patch adds support for offloading checksum to hardware. IP checksum have been tested for IPv4 and IPv6. Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com> Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Randy Dunlap authored
Fix staging/sxg napi interface calls: drivers/staging/sxg/sxg.c:1271: error: implicit declaration of function 'netif_rx_schedule_prep' linux-next-20090209/drivers/staging/sxg/sxg.c:1272: error: implicit declaration of function '__netif_rx_schedule' drivers/staging/sxg/sxg.c:1325: error: implicit declaration of function 'netif_rx_complete' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Mithlesh Thukral <mithlesh@linsyssoft.com> Cc: LinSysSoft Sahara Team <saharaproj@linsyssoft.com> Cc: Christopher Harrer <charrer@alacritech.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Mithlesh Thukral authored
Make Sahara SXG driver use MSI-X interrupts instead of line based interrupts if possible. In case of problems in getting MSI-X vectors or MSI-X not being supported, driver will fall back to use previous line based interrupts. Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com> Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-