The duplicate file "include/asm-arm/arch-at91rm9200/entry-macro.S" can
be removed - it was already moved to include/asm-arm/arch-at91/.

Fix 3 small typo's - two in comments, and the incorrect clock was
specified for the LCD device.
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Add the Armzone QT2410 to the list of built
machines in the s3c2410_defconfig
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Udpate s3c2410_defconfig for 2.6.21-rc1
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 4165/1: S3C24XX: Select CONFIG_NO_IOPORT
  [ARM] Fix s3c2410 ALSA audio for typedef elimination
  [ARM] Fix ARM AACI ALSA driver
  [ARM] fix mach-at91 build breakage
  [ARM] Fix jornada720 build errors
  [ARM] Fix iop13xx build error
  [ARM] Fix build error caused by move of apm
  [ARM] 4223/1: ixdp2351 : Fix for a define error
  [ARM] 4187/1: iop: unify time implementation across iop32x, iop33x, and iop13xx
  [ARM] 4186/1: iop: remove cp6_enable/disable routines
  [ARM] 4185/2: entry: introduce get_irqnr_preamble and arch_ret_to_user

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (21 commits)
  natsemi: Support Aculab E1/T1 PMXc cPCI carrier cards
  natsemi: Add support for using MII port with no PHY
  skge: race with workq and RTNL
  Replace local random function with random32()
  s2io: RTNL and flush_scheduled_work deadlock
  8139too: RTNL and flush_scheduled_work deadlock
  sis190: RTNL and flush_scheduled_work deadlock
  r8169: RTNL and flush_scheduled_work deadlock
  [PATCH] ieee80211softmac: Fix setting of initial transmit rates
  [PATCH] bcm43xx: OFDM fix for rev 1 cards
  [PATCH] bcm43xx: Fix for 4311 and 02/07/07 specification changes
  [PATCH] prism54: correct assignment of DOT1XENABLE in WE-19 codepaths
  [PATCH] zd1211rw: Readd zd_addr_t cast
  [PATCH] bcm43xx: Fix for oops on resume
  [PATCH] bcm43xx: Ignore ampdu status reports
  [PATCH] wavelan: Use ARRAY_SIZE macro when appropriate
  [PATCH] hostap: Use ARRAY_SIZE macro when appropriate
  [PATCH] misc-wireless: Use ARRAY_SIZE macro when appropriate
  [PATCH] ipw2100: Use ARRAY_SIZE macro when appropriate
  [PATCH] bcm43xx: Janitorial change - remove two unused variables
  ...

* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight:
  backlight: Remove bogus SYSFS dependency
  backlight: simplify corgi_bl locking
  backlight: Separate backlight properties from backlight ops pointers
  backlight: Clean up pmac_backlight handling
  backlight: Improve backlight selection for fbdev drivers
  backlight: Rework backlight/fb interaction simplifying, lots
  backlight: Remove unneeded backlight update_status calls
  backlight: Remove uneeded update_status call from chipsfb.c
  backlight/fbcon: Add FB_EVENT_CONBLANK
  backlight: Fix Kconfig entries
  backlight: Remove uneeded nvidia set_power calls
  backlight: Convert semaphore -> mutex
  backlight: Fix external uses of backlight internal semaphore
  backlight: Minor code cleanups for hp680_bl.c
  backlight: Minor code cleanups for corgi_bl.c
  backlight: Remove excessive (un)likelys
  backlight: Remove unneeded owner field
  backlight: Fix error handling
  backlight: Add Frontpath ProGear HX1050+ driver
  backlight: Add maintainer entry

The rename of the AT91 subtree from mach-at91rm9200 to mach-at91
(to accomodate at91sam926x processors) was incomplete.  It needs
this patch to be able to build again.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [NET] Eliminate user-selectable CONFIG_MV643XX_ETH_[012]
  [MIPS] Drop __init from init_8259A()
  [MIPS] Fix Kconfig typo bug
  [MIPS] Fix double signal on trap and break instruction
  [MIPS] sigset_32 has been made redundand by compat_sigset_t.
  [MIPS] emma2rh: Remove needless <asm/i8259.h> inclusion.
  [MIPS] Add MTD device support for Cobalt

tty_register_driver: Remove incorrect and superfluous cast (expected and passed
types are both const char *)
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove the use of CONFIG_MV643XX_ETH_[012] variables on most platforms.
Instead, platform-specific code enables the ports supported by the
hardware.  After this patch, these config variables are only used in
arch/ppc, so also move them from drivers/net/Kconfig to arch/ppc/Kconfig.
Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Jeff Garzik <jeff@garzik.org>
Cc: Paul Mackerras <paulus@samba.org>

init_8259A() is called from i8259A_resume() so should not be marked as
__init.  And add some tests for whether 8259A was already initialized
or not.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This commit broke gdb, since any BREAK or TRAP instruction cause SIGSEGV.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This patch has added MTD device support for Cobalt.
Moreover, removes old type FlashROM support.
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

On S3C24XX architecture, select CONFIG_NO_IOPORT
as we only have memory based IO.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Merge branch 'upstream-jgarzik' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream

Aculab E1/T1 PMXc cPCI carrier card cards present a natsemi on the cPCI
bus with an oversized EEPROM using a direct MII<->MII connection with no
PHY.  This patch adds a new device table entry supporting these cards.
Signed-Off-By: Mark Brown <broonie@sirena.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

This patch provides code paths which allow the natsemi driver to use the
external MII port on the chip but ignore any PHYs that may be attached to it.
The link state will be left as it was when the driver started and can be
configured via ethtool.  Any PHYs that are present can be accessed via the MII
ioctl()s.

This is useful for systems where the device is connected without a PHY
or where either information or actions outside the scope of the driver
are required in order to use the PHYs.
Signed-Off-By: Mark Brown <broonie@sirena.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

If a workqueue function that needs RTNL is running when skge_down
is called then a deadlock is possible. Fix by only clearing the timer,
and handling the flush_scheduled_work on removal. This work queue is only
ever used for the old fiber based boards.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Mantra: don't use flush_scheduled_work with RTNL held.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Your usual dont-flush_scheduled_work-with-RTNL-held stuff.

It is a bit different here since the thread runs permanently
or is only occasionally kicked for recovery depending on the
hardware revision.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

flush_scheduled_work() in net_device->close has a slight tendency
to deadlock with tasks on the workqueue that hold RTNL.

rtl8169_close/down simply need the recovery tasks to not meddle
with the hardware while the device is going down.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

  CC [M]  sound/arm/aaci.o
sound/arm/aaci.c:729: error: parse error before '*' token
sound/arm/aaci.c:731: warning: function declaration isn't a prototype
...
sound/arm/aaci.c:786: error: parse error before '*' token
sound/arm/aaci.c:786: warning: function declaration isn't a prototype
...
sound/arm/aaci.c:827: error: parse error before '*' token
sound/arm/aaci.c:828: warning: function declaration isn't a prototype
...
sound/arm/aaci.c:845: error: parse error before "aaci_capture_ops"
sound/arm/aaci.c:845: warning: type defaults to `int' in declaration of `aaci_capture_ops'
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

The rename of the AT91 subtree from mach-at91rm9200 to mach-at91
(to accomodate at91sam926x processors) was incomplete.  It needs
this patch to be able to build again.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

kernel/built-in.o: In function `pm_suspend':
utsname_sysctl.c:(.text+0x23008): multiple definition of `pm_suspend'
arch/arm/mach-sa1100/built-in.o:arch/arm/mach-sa1100/sleep.S:(.text+0xf68): first defined here
arm-linux-ld: Warning: size of symbol `pm_suspend' changed from 20 in arch/arm/mach-sa1100/built-in.o to 44 in kernel/built-in.o
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

  CC      arch/arm/mach-iop13xx/setup.o
arch/arm/mach-iop13xx/setup.c: In function 'iq8134x_probe_flash_size':
arch/arm/mach-iop13xx/setup.c:210: warning: implicit declaration of function 'ioremap'
arch/arm/mach-iop13xx/setup.c:210: warning: initialization makes pointer from integer without a cast
arch/arm/mach-iop13xx/setup.c:218: warning: implicit declaration of function 'writew'
arch/arm/mach-iop13xx/setup.c:222: warning: implicit declaration of function 'readb'
arch/arm/mach-iop13xx/setup.c:231: warning: implicit declaration of function 'iounmap'
  LD      .tmp_vmlinux1
arch/arm/mach-iop13xx/built-in.o: In function `iop13xx_platform_init':
iq81340mc.c:(.init.text+0x150): undefined reference to `ioremap'
iq81340mc.c:(.init.text+0x21c): undefined reference to `writew'
iq81340mc.c:(.init.text+0x24c): undefined reference to `writew'
iq81340mc.c:(.init.text+0x254): undefined reference to `iounmap'
iq81340mc.c:(.init.text+0x2c4): undefined reference to `readb'
iq81340mc.c:(.init.text+0x2e8): undefined reference to `readb'
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

  CC      arch/arm/common/sharpsl_pm.o
arch/arm/common/sharpsl_pm.c:30:31: error: asm/apm-emulation.h: No such file or directory
...
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Remove a bogus SYSFS dependency from the backlight class
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>

Fix syntax error for a define in ixdp2351.h
Signed-off-by: ozzy <linux-ozzy@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Conflicts:
	include/asm-arm/arch-at91rm9200/entry-macro.S
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Now update_status has locking, we can remove the mutex from corgi_bl.
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>

Per device data such as brightness belongs to the indivdual device
and should therefore be separate from the the backlight operation
function pointers. This patch splits the two types of data and
allows simplifcation of some code.
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>

Move the setting/unsetting of pmac_backlight into the
backlight core instead of doing it in each driver.
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>

Improve backlight selection for fbdev drivers
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>