- 25 Feb, 2020 3 commits
-
-
Mikulas Patocka authored
If the flag SB_FLAG_RECALCULATE is present in the superblock, but it was not specified on the command line (i.e. ic->recalculate_flag is false), dm-integrity would return invalid table line - the reported number of arguments would not match the real number. Fixes: 468dfca3 ("dm integrity: add a bitmap mode") Cc: stable@vger.kernel.org # v5.2+ Reported-by:
Ondrej Kozina <okozina@redhat.com> Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com>
-
Mikulas Patocka authored
If we need to perform synchronous I/O in dm_integrity_map_continue(), we must make sure that we are not in the map function - in order to avoid the deadlock due to bio queuing in generic_make_request. To avoid the deadlock, we offload the request to metadata_wq. However, metadata_wq also processes metadata updates for write requests. If there are too many requests that get offloaded to metadata_wq at the beginning of dm_integrity_map_continue, the workqueue metadata_wq becomes clogged and the system is incapable of processing any metadata updates. This causes a deadlock because all the requests that need to do metadata updates wait for metadata_wq to proceed and metadata_wq waits inside wait_and_add_new_range until some existing request releases its range lock (which doesn't happen because the range lock is released after metadata update). In order to fix the deadlock, we create a new workqueue offload_wq and offload requests to it - so that processing of offload_wq is independent from processing of metadata_wq. Fixes: 7eada909 ("dm: add integrity target") Cc: stable@vger.kernel.org # v4.12+ Reported-by:
Heinz Mauelshagen <heinzm@redhat.com> Tested-by:
-
Mikulas Patocka authored
If we resume a device in bitmap mode and the on-disk format is in journal mode, we must recalculate anything above ic->sb->recalc_sector. Otherwise, there would be non-recalculated blocks which would cause I/O errors. Fixes: 468dfca3 ("dm integrity: add a bitmap mode") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by:
-
- 27 Jan, 2020 1 commit
-
-
Mike Snitzer authored
Move blk_queue_make_request() to dm.c:alloc_dev() so that q->make_request_fn is never NULL during the lifetime of a DM device (even one that is created without a DM table). Otherwise generic_make_request() will crash simply by doing: dmsetup create -n test mount /dev/dm-N /mnt While at it, move ->congested_data initialization out of dm.c:alloc_dev() and into the bio-based specific init method. Reported-by:
Stefan Bader <stefan.bader@canonical.com> BugLink: https://bugs.launchpad.net/bugs/1860231 Fixes: ff36ab34 ("dm: remove request-based logic from make_request_fn wrapper") Depends-on: c12c9a3c ("dm: various cleanups to md->queue initialization code") Cc: stable@vger.kernel.org Signed-off-by:
-
- 16 Jan, 2020 1 commit
-
-
Mikulas Patocka authored
When dm-writecache is used with SSD as a cache device, it would submit a separate bio for each written block. The I/Os would be merged by the disk scheduler, but this merging degrades performance. Improve dm-writecache performance by submitting larger bios - this is possible as long as there is consecutive free space on the cache device. Benchmark (arm64 with 64k page size, using /dev/ram0 as a cache device): fio --bs=512k --iodepth=32 --size=400M --direct=1 \ --filename=/dev/mapper/cache --rw=randwrite --numjobs=1 --name=test block old new size MiB/s MiB/s --------------------- 512 181 700 1k 347 1256 2k 644 2020 4k 1183 2759 8k 1852 3333 16k 2469 3509 32k 2974 3670 64k 3404 3810 Signed-off-by:
-
- 15 Jan, 2020 9 commits
-
-
Anatol Pomazau authored
Add a configurable timeout mechanism to disable queue_if_no_path without assistance from userspace multipathd. This reimplements multipathd's no_path_retry mechanism in kernel space. This is motivated by the desire to prevent processes from hanging indefinitely waiting for IO in cases where multipathd might be unable to respond (after a failure or for whatever reason). Despite replicating userspace multipathd's policy configuration in kernel space, it is important to prevent IOs from hanging forever, waiting for userspace that may be incapable of behaving correctly. Use of the provided "queue_if_no_path_timeout_secs" dm-multipath module parameter is optional. This timeout mechanism is disabled by default (by being set to 0). Signed-off-by:
Anatol Pomazau <anatol@google.com> Co-developed-by:
Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by:
-
Mikulas Patocka authored
With commit fe64369163c5 ("dm thin: don't allow changing data device during thin-pool load") it is now possible to re-parent the data device's flush_bio from the pool_c to pool structure. Doing so offers improved lifetime guarantees for the flush_bio so that the call to dm_pool_register_pre_commit_callback can now be done safely from pool_ctr(). Depends-on: fe64369163c5 ("dm thin: don't allow changing data device during thin-pool load") Signed-off-by: -
Mikulas Patocka authored
The existing code allows changing the data device when the thin-pool target is reloaded. This capability is not required and only complicates device lifetime guarantees. This can cause crashes like the one reported here: https://bugzilla.redhat.com/show_bug.cgi?id=1788596 where the kernel tries to issue a flush bio located in a structure that was already freed. Take the first step to simplifying the thin-pool's data device lifetime by disallowing changing it. Like the thin-pool's metadata device, the data device is now set in pool_create() and it cannot be changed for a given thin-pool. Signed-off-by:
-
Mike Snitzer authored
dm-thin uses struct pool to hold the state of the pool. There may be multiple pool_c's pointing to a given pool, each pool_c represents a loaded target. pool_c's may be created and destroyed arbitrarily and the pool contains a reference count of pool_c's pointing to it. Since commit 694cfe7f ("dm thin: Flush data device before committing metadata") a pointer to pool_c is passed to dm_pool_register_pre_commit_callback and this function stores it in pmd->pre_commit_context. If this pool_c is freed, but pool is not (because there is another pool_c referencing it), we end up in a situation where pmd->pre_commit_context structure points to freed pool_c. It causes a crash in metadata_pre_commit_callback. Fix this by moving the dm_pool_register_pre_commit_callback() from pool_ctr() to pool_preresume(). This way the in-core thin-pool metadata is only ever armed with callback data whose lifetime matches the active thin-pool target. In should be noted that this fix preserves the ability to load a thin-pool table that uses a different data block device (that contains the same data) -- though it is unclear if that capability is still useful and/or needed. Fixes: 694cfe7f ("dm thin: Flush data device before committing metadata") Cc: stable@vger.kernel.org Reported-by:
Zdenek Kabelac <zkabelac@redhat.com> Reported-by:
-
Mike Snitzer authored
Ensure that the pool is locked during calls to __commit_transaction and __destroy_persistent_data_objects. Just being consistent with locking, but reality is dm_pool_metadata_close is called once pool is being destroyed so access to pool shouldn't be contended. Also, use pmd_write_lock_in_core rather than __pmd_write_lock in dm_pool_commit_metadata and rename __pmd_write_lock to pmd_write_lock_in_core -- there was no need for the alias. In addition, verify that the pool is locked in __commit_transaction(). Fixes: 873f258b ("dm thin metadata: do not write metadata if no changes occurred") Cc: stable@vger.kernel.org Signed-off-by:
-
Mikulas Patocka authored
When committing state, the function writecache_flush does the following: 1. write metadata (writecache_commit_flushed) 2. flush disk cache (writecache_commit_flushed) 3. wait for data writes to complete (writecache_wait_for_ios) 4. increase superblock seq_count 5. write the superblock 6. flush disk cache It may happen that at step 3, when we wait for some write to finish, the disk may report the write as finished, but the write only hit the disk cache and it is not yet stored in persistent storage. At step 5 we write the superblock - it may happen that the superblock is written before the write that we waited for in step 3. If the machine crashes, it may result in incorrect data being returned after reboot. In order to fix the bug, we must swap steps 2 and 3 in the above sequence, so that we first wait for writes to complete and then flush the disk cache. Fixes: 48debafe ("dm: add writecache target") Cc: stable@vger.kernel.org # 4.18+ Signed-off-by:
-
Milan Broz authored
If benbi IV is used in AEAD construction, for example: cryptsetup luksFormat <device> --cipher twofish-xts-benbi --key-size 512 --integrity=hmac-sha256 the constructor uses wrong skcipher function and crashes: BUG: kernel NULL pointer dereference, address: 00000014 ... EIP: crypt_iv_benbi_ctr+0x15/0x70 [dm_crypt] Call Trace: ? crypt_subkey_size+0x20/0x20 [dm_crypt] crypt_ctr+0x567/0xfc0 [dm_crypt] dm_table_add_target+0x15f/0x340 [dm_mod] Fix this by properly using crypt_aead_blocksize() in this case. Fixes: ef43aa38 ("dm crypt: add cryptographic data integrity protection (authenticated encryption)") Cc: stable@vger.kernel.org # v4.12+ Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=941051Reported-by:
Jerad Simpson <jbsimpson@gmail.com> Signed-off-by:
Milan Broz <gmazyland@gmail.com> Signed-off-by:
-
Milan Broz authored
Add experimental support for BitLocker encryption with CBC mode and additional Elephant diffuser. The mode was used in older Windows systems and it is provided mainly for compatibility reasons. The userspace support to activate these devices is being added to cryptsetup utility. Read-write activation of such a device is very simple, for example: echo <password> | cryptsetup bitlkOpen bitlk_image.img test The Elephant diffuser uses two rotations in opposite direction for data (Diffuser A and B) and also XOR operation with Sector key over the sector data; Sector key is derived from additional key data. The original public documentation is available here: http://download.microsoft.com/download/0/2/3/0238acaf-d3bf-4a6d-b3d6-0a0be4bbb36e/bitlockercipher200608.pdf The dm-crypt implementation is embedded to "elephant" IV (similar to tcw IV construction). Because we cannot modify original bio data for write (before encryption), an additional internal flag to pre-process data is added. Signed-off-by:
-
Joe Thornber authored
The space-maps track the reference counts for disk blocks allocated by both the thin-provisioning and cache targets. There are variants for tracking metadata blocks and data blocks. Transactionality is implemented by never touching blocks from the previous transaction, so we can rollback in the event of a crash. When allocating a new block we need to ensure the block is free (has reference count of 0) in both the current and previous transaction. Prior to this fix we were doing this by searching for a free block in the previous transaction, and relying on a 'begin' counter to track where the last allocation in the current transaction was. This 'begin' field was not being updated in all code paths (eg, increment of a data block reference count due to breaking sharing of a neighbour block in the same btree leaf). This fix keeps the 'begin' field, but now it's just a hint to speed up the search. Instead the current transaction is searched for a free block, and then the old transaction is double checked to ensure it's free. Much simpler. This fixes reports of sm_disk_new_block()'s BUG_ON() triggering when DM thin-provisioning's snapshots are heavily used. Reported-by:
Eric Wheeler <dm-devel@lists.ewheeler.net> Cc: stable@vger.kernel.org Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
-
- 07 Jan, 2020 10 commits
-
-
xianrong.zhou authored
Try to skip prefetching hash blocks that won't be needed due to the "check_at_most_once" option being enabled and the corresponding data blocks already having been verified. Since prefetching operates on a range of data blocks, do this by just trimming the two ends of the range. This doesn't skip every unneeded hash block, since data blocks in the middle of the range could also be unneeded, and hash blocks are still prefetched in large clusters as controlled by dm_verity_prefetch_cluster. But it can still help a lot. In a test on Android Q launching 91 apps every 15s repeated 21 times, prefetching was only done for 447177/4776629 = 9.36% of data blocks. Tested-by:
ruxian.feng <ruxian.feng@transsion.com> Co-developed-by:
yuanjiong.gao <yuanjiong.gao@transsion.com> Signed-off-by:
xianrong.zhou <xianrong.zhou@transsion.com> [EB: simplified the 'while' loops and improved the commit message] Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Mikulas Patocka authored
GFP_KERNEL is not supposed to be or'd with GFP_NOFS (the result is equivalent to GFP_KERNEL). Also, we use GFP_NOIO instead of GFP_NOFS because we don't want any I/O being submitted in the direct reclaim path. Fixes: 39d13a1a ("dm crypt: reuse eboiv skcipher for IV generation") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by:
-
Jeffle Xu authored
Signed-off-by:
Jeffle Xu <jefflexu@linux.alibaba.com> Signed-off-by:
-
zhengbin authored
Fixes coccicheck warning: drivers/md/dm-thin-metadata.c:814:3-14: WARNING: Assignment of 0/1 to bool variable drivers/md/dm-thin-metadata.c:1109:1-12: WARNING: Assignment of 0/1 to bool variable drivers/md/dm-thin-metadata.c:1621:1-12: WARNING: Assignment of 0/1 to bool variable drivers/md/dm-thin-metadata.c:1652:1-12: WARNING: Assignment of 0/1 to bool variable drivers/md/dm-thin-metadata.c:1706:1-12: WARNING: Assignment of 0/1 to bool variable Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
zhengbin <zhengbin13@huawei.com> Signed-off-by:
-
zhengbin authored
Fixes coccicheck warning: drivers/md/dm-snap.c:1064:3-18: WARNING: Assignment of 0/1 to bool variable drivers/md/dm-snap.c:1152:1-16: WARNING: Assignment of 0/1 to bool variable drivers/md/dm-snap.c:1317:1-16: WARNING: Assignment of 0/1 to bool variable Reported-by:
-
zhengbin authored
Fixes coccicheck warning: drivers/md/dm-bio-prison-v2.c:327:2-22: WARNING: Assignment of 0/1 to bool variable Reported-by:
-
zhengbin authored
Fixes coccicheck warning: drivers/md/dm-mpath.c:1447:2-13: WARNING: Assignment of 0/1 to bool variable Reported-by:
-
Dmitry Fomichev authored
dm-zoned is observed to log failed kernel assertions and not work correctly when operating against a device with a zone size smaller than 128MiB (e.g. 32768 bits per 4K block). The reason is that the bitmap size per zone is calculated as zero with such a small zone size. Fix this problem and also make the code related to zone bitmap management be able to handle per zone bitmaps smaller than a single block. A dm-zoned-tools patch is required to properly format dm-zoned devices with zone sizes smaller than 128MiB. Fixes: 3b1a94c8 ("dm zoned: drive-managed zoned block device target") Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
-
Heinz Mauelshagen authored
raid_status() wasn't emitting rebuild flags on the table line properly because the rdev number was not yet set properly; index raid component devices array directly to solve. Also fix wrong argument count on emitted table line caused by 1 too many rebuild/write_mostly argument and consider any journal_(dev|mode) pairs. Link: https://bugzilla.redhat.com/1782045Signed-off-by:
-
Bryan Gurney authored
In the dust_map_write() function, change the return code variable "ret" to "r", to match the convention of the other device-mapper targets. Signed-off-by:
Bryan Gurney <bgurney@redhat.com> Signed-off-by:
-
- 05 Jan, 2020 7 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Paul Walmsley: "Several fixes for RISC-V: - Fix function graph trace support - Prefix the CSR IRQ_* macro names with "RV_", to avoid collisions with macros elsewhere in the Linux kernel tree named "IRQ_TIMER" - Use __pa_symbol() when computing the physical address of a kernel symbol, rather than __pa() - Mark the RISC-V port as supporting GCOV One DT addition: - Describe the L2 cache controller in the FU540 DT file One documentation update: - Add patch acceptance guideline documentation" * tag 'riscv/for-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: Documentation: riscv: add patch acceptance guidelines riscv: prefix IRQ_ macro names with an RV_ namespace clocksource: riscv: add notrace to riscv_sched_clock riscv: ftrace: correct the condition logic in function graph tracer riscv: dts: Add DT support for SiFive L2 cache controller riscv: gcov: enable gcov for RISC-V riscv: mm: use __pa_symbol for kernel symbols -
Paul Walmsley authored
Formalize, in kernel documentation, the patch acceptance policy for arch/riscv. In summary, it states that as maintainers, we plan to only accept patches for new modules or extensions that have been frozen or ratified by the RISC-V Foundation. We've been following these guidelines for the past few months. In the meantime, we've received quite a bit of feedback that it would be helpful to have these guidelines formally documented. Based on a suggestion from Matthew Wilcox, we also add a link to this file to Documentation/process/index.rst, to make this document easier to find. The format of this document has also been changed to align to the format outlined in the maintainer entry profiles, in accordance with comments from Jon Corbet and Dan Williams. Signed-off-by:
Paul Walmsley <paul.walmsley@sifive.com> Reviewed-by:
Palmer Dabbelt <palmerdabbelt@google.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Krste Asanovic <krste@berkeley.edu> Cc: Andrew Waterman <waterman@eecs.berkeley.edu> Cc: Matthew Wilcox <willy@infradead.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jonathan Corbet <corbet@lwn.net>
-
Paul Walmsley authored
"IRQ_TIMER", used in the arch/riscv CSR header file, is a sufficiently generic macro name that it's used by several source files across the Linux code base. Some of these other files ultimately include the arch/riscv CSR include file, causing collisions. Fix by prefixing the RISC-V csr.h IRQ_ macro names with an RV_ prefix. Fixes: a4c3733d ("riscv: abstract out CSR names for supervisor vs machine mode") Reported-by:
Olof Johansson <olof@lixom.net> Acked-by:
-
Zong Li authored
When enabling ftrace graph tracer, it gets the tracing clock in ftrace_push_return_trace(). Eventually, it invokes riscv_sched_clock() to get the clock value. If riscv_sched_clock() isn't marked with 'notrace', it will call ftrace_push_return_trace() and cause infinite loop. The result of failure as follow: command: echo function_graph >current_tracer [ 46.176787] Unable to handle kernel paging request at virtual address ffffffe04fb38c48 [ 46.177309] Oops [#1] [ 46.177478] Modules linked in: [ 46.177770] CPU: 0 PID: 256 Comm: $d Not tainted 5.5.0-rc1 #47 [ 46.177981] epc: ffffffe00035e59a ra : ffffffe00035e57e sp : ffffffe03a7569b0 [ 46.178216] gp : ffffffe000d29b90 tp : ffffffe03a756180 t0 : ffffffe03a756968 [ 46.178430] t1 : ffffffe00087f408 t2 : ffffffe03a7569a0 s0 : ffffffe03a7569f0 [ 46.178643] s1 : ffffffe00087f408 a0 : 0000000ac054cda4 a1 : 000000000087f411 [ 46.178856] a2 : 0000000ac054cda4 a3 : 0000000000373ca0 a4 : ffffffe04fb38c48 [ 46.179099] a5 : 00000000153e22a8 a6 : 00000000005522ff a7 : 0000000000000005 [ 46.179338] s2 : ffffffe03a756a90 s3 : ffffffe00032811c s4 : ffffffe03a756a58 [ 46.179570] s5 : ffffffe000d29fe0 s6 : 0000000000000001 s7 : 0000000000000003 [ 46.179809] s8 : 0000000000000003 s9 : 0000000000000002 s10: 0000000000000004 [ 46.180053] s11: 0000000000000000 t3 : 0000003fc815749c t4 : 00000000000efc90 [ 46.180293] t5 : ffffffe000d29658 t6 : 0000000000040000 [ 46.180482] status: 0000000000000100 badaddr: ffffffe04fb38c48 cause: 000000000000000f Signed-off-by:
Zong Li <zong.li@sifive.com> Reviewed-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> [paul.walmsley@sifive.com: cleaned up patch description] Fixes: 92e0d143 ("clocksource/drivers/riscv_timer: Provide the sched_clock") Cc: stable@vger.kernel.org Signed-off-by:
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "17 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: hexagon: define ioremap_uc ocfs2: fix the crash due to call ocfs2_get_dlm_debug once less ocfs2: call journal flush to mark journal as empty after journal recovery when mount mm/hugetlb: defer freeing of huge pages if in non-task context mm/gup: fix memory leak in __gup_benchmark_ioctl mm/oom: fix pgtables units mismatch in Killed process message fs/posix_acl.c: fix kernel-doc warnings hexagon: work around compiler crash hexagon: parenthesize registers in asm predicates fs/namespace.c: make to_mnt_ns() static fs/nsfs.c: include headers for missing declarations fs/direct-io.c: include fs/internal.h for missing prototype mm: move_pages: return valid node id in status if the page is already on the target node memcg: account security cred as well to kmemcg kcov: fix struct layout for kcov_remote_arg mm/zsmalloc.c: fix the migrated zspage statistics. mm/memory_hotplug: shrink zones when offlining memory
-
Linus Torvalds authored
Merge tag 'apparmor-pr-2020-01-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor Pull apparmor fixes from John Johansen: - performance regression: only get a label reference if the fast path check fails - fix aa_xattrs_match() may sleep while holding a RCU lock - fix bind mounts aborting with -ENOMEM * tag 'apparmor-pr-2020-01-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor: apparmor: fix aa_xattrs_match() may sleep while holding a RCU lock apparmor: only get a label reference if the fast path check fails apparmor: fix bind mounts aborting with -ENOMEM
-
- 04 Jan, 2020 9 commits
-
-
John Johansen authored
aa_xattrs_match() is unfortunately calling vfs_getxattr_alloc() from a context protected by an rcu_read_lock. This can not be done as vfs_getxattr_alloc() may sleep regardles of the gfp_t value being passed to it. Fix this by breaking the rcu_read_lock on the policy search when the xattr match feature is requested and restarting the search if a policy changes occur. Fixes: 8e51f908 ("apparmor: Add support for attaching profiles via xattr, presence and value") Reported-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Reported-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
John Johansen <john.johansen@canonical.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS fixes from Paul Burton: "A collection of MIPS fixes: - Fill the struct cacheinfo shared_cpu_map field with sensible values, notably avoiding issues with perf which was unhappy in the absence of these values. - A boot fix for Loongson 2E & 2F machines which was fallout from some refactoring performed this cycle. - A Kconfig dependency fix for the Loongson CPU HWMon driver. - A couple of VDSO fixes, ensuring gettimeofday() behaves appropriately for kernel configurations that don't include support for a clocksource the VDSO can use & fixing the calling convention for the n32 & n64 VDSOs which would previously clobber the $gp/$28 register. - A build fix for vmlinuz compressed images which were inappropriately building with -fsanitize-coverage despite not being part of the kernel proper, then failing to link due to the missing __sanitizer_cov_trace_pc() function. - A couple of eBPF JIT fixes, including disabling it for MIPS32 due to a large number of issues with the code generated there & reflecting ISA dependencies in Kconfig to enforce that systems which don't support the JIT must include the interpreter" * tag 'mips_fixes_5.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Avoid VDSO ABI breakage due to global register variable MIPS: BPF: eBPF JIT: check for MIPS ISA compliance in Kconfig MIPS: BPF: Disable MIPS32 eBPF JIT MIPS: Prevent link failure with kcov instrumentation MIPS: Kconfig: Use correct form for 'depends on' mips: Fix gettimeofday() in the vdso library MIPS: Fix boot on Fuloong2 systems mips: cacheinfo: report shared CPU map -
Nick Desaulniers authored
Similar to commit 38e45d81 ("sparc64: implement ioremap_uc") define ioremap_uc for hexagon to avoid errors from -Wimplicit-function-definition. Link: http://lkml.kernel.org/r/20191209222956.239798-2-ndesaulniers@google.com Link: https://github.com/ClangBuiltLinux/linux/issues/797 Fixes: e537654b ("lib: devres: add a helper function for ioremap_uc") Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Suggested-by:
Nathan Chancellor <natechancellor@gmail.com> Acked-by:
Brian Cain <bcain@codeaurora.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Tuowen Zhao <ztuowen@gmail.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alexios Zavras <alexios.zavras@intel.com> Cc: Allison Randal <allison@lohutok.net> Cc: Will Deacon <will@kernel.org> Cc: Richard Fontana <rfontana@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Gang He authored
Because ocfs2_get_dlm_debug() function is called once less here, ocfs2 file system will trigger the system crash, usually after ocfs2 file system is unmounted. This system crash is caused by a generic memory corruption, these crash backtraces are not always the same, for exapmle, ocfs2: Unmounting device (253,16) on (node 172167785) general protection fault: 0000 [#1] SMP PTI CPU: 3 PID: 14107 Comm: fence_legacy Kdump: Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:__kmalloc+0xa5/0x2a0 Code: 00 00 4d 8b 07 65 4d 8b RSP: 0018:ffffaa1fc094bbe8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: d310a8800d7a3faf RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000dc0 RDI: ffff96e68fc036c0 RBP: d310a8800d7a3faf R08: ffff96e6ffdb10a0 R09: 00000000752e7079 R10: 000000000001c513 R11: 0000000004091041 R12: 0000000000000dc0 R13: 0000000000000039 R14: ffff96e68fc036c0 R15: ffff96e68fc036c0 FS: 00007f699dfba540(0000) GS:ffff96e6ffd80000(0000) knlGS:00000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055f3a9d9b768 CR3: 000000002cd1c000 CR4: 00000000000006e0 Call Trace: ext4_htree_store_dirent+0x35/0x100 [ext4] htree_dirblock_to_tree+0xea/0x290 [ext4] ext4_htree_fill_tree+0x1c1/0x2d0 [ext4] ext4_readdir+0x67c/0x9d0 [ext4] iterate_dir+0x8d/0x1a0 __x64_sys_getdents+0xab/0x130 do_syscall_64+0x60/0x1f0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f699d33a9fb This regression problem was introduced by commit e581595e ("ocfs: no need to check return value of debugfs_create functions"). Link: http://lkml.kernel.org/r/20191225061501.13587-1-ghe@suse.com Fixes: e581595e ("ocfs: no need to check return value of debugfs_create functions") Signed-off-by:Gang He <ghe@suse.com> Acked-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> [5.3+] Signed-off-by:
-
Kai Li authored
If journal is dirty when mount, it will be replayed but jbd2 sb log tail cannot be updated to mark a new start because journal->j_flag has already been set with JBD2_ABORT first in journal_init_common. When a new transaction is committed, it will be recored in block 1 first(journal->j_tail is set to 1 in journal_reset). If emergency restart happens again before journal super block is updated unfortunately, the new recorded trans will not be replayed in the next mount. The following steps describe this procedure in detail. 1. mount and touch some files 2. these transactions are committed to journal area but not checkpointed 3. emergency restart 4. mount again and its journals are replayed 5. journal super block's first s_start is 1, but its s_seq is not updated 6. touch a new file and its trans is committed but not checkpointed 7. emergency restart again 8. mount and journal is dirty, but trans committed in 6 will not be replayed. This exception happens easily when this lun is used by only one node. If it is used by multi-nodes, other node will replay its journal and its journal super block will be updated after recovery like what this patch does. ocfs2_recover_node->ocfs2_replay_journal. The following jbd2 journal can be generated by touching a new file after journal is replayed, and seq 15 is the first valid commit, but first seq is 13 in journal super block. logdump: Block 0: Journal Superblock Seq: 0 Type: 4 (JBD2_SUPERBLOCK_V2) Blocksize: 4096 Total Blocks: 32768 First Block: 1 First Commit ID: 13 Start Log Blknum: 1 Error: 0 Feature Compat: 0 Feature Incompat: 2 block64 Feature RO compat: 0 Journal UUID: 4ED3822C54294467A4F8E87D2BA4BC36 FS Share Cnt: 1 Dynamic Superblk Blknum: 0 Per Txn Block Limit Journal: 0 Data: 0 Block 1: Journal Commit Block Seq: 14 Type: 2 (JBD2_COMMIT_BLOCK) Block 2: Journal Descriptor Seq: 15 Type: 1 (JBD2_DESCRIPTOR_BLOCK) No. Blocknum Flags 0. 587 none UUID: 00000000000000000000000000000000 1. 8257792 JBD2_FLAG_SAME_UUID 2. 619 JBD2_FLAG_SAME_UUID 3. 24772864 JBD2_FLAG_SAME_UUID 4. 8257802 JBD2_FLAG_SAME_UUID 5. 513 JBD2_FLAG_SAME_UUID JBD2_FLAG_LAST_TAG ... Block 7: Inode Inode: 8257802 Mode: 0640 Generation: 57157641 (0x3682809) FS Generation: 2839773110 (0xa9437fb6) CRC32: 00000000 ECC: 0000 Type: Regular Attr: 0x0 Flags: Valid Dynamic Features: (0x1) InlineData User: 0 (root) Group: 0 (root) Size: 7 Links: 1 Clusters: 0 ctime: 0x5de5d870 0x11104c61 -- Tue Dec 3 11:37:20.286280801 2019 atime: 0x5de5d870 0x113181a1 -- Tue Dec 3 11:37:20.288457121 2019 mtime: 0x5de5d870 0x11104c61 -- Tue Dec 3 11:37:20.286280801 2019 dtime: 0x0 -- Thu Jan 1 08:00:00 1970 ... Block 9: Journal Commit Block Seq: 15 Type: 2 (JBD2_COMMIT_BLOCK) The following is journal recovery log when recovering the upper jbd2 journal when mount again. syslog: ocfs2: File system on device (252,1) was not unmounted cleanly, recovering it. fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 0 fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 1 fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 2 fs/jbd2/recovery.c:(jbd2_journal_recover, 278): JBD2: recovery, exit status 0, recovered transactions 13 to 13 Due to first commit seq 13 recorded in journal super is not consistent with the value recorded in block 1(seq is 14), journal recovery will be terminated before seq 15 even though it is an unbroken commit, inode 8257802 is a new file and it will be lost. Link: http://lkml.kernel.org/r/20191217020140.2197-1-li.kai4@h3c.comSigned-off-by:
Kai Li <li.kai4@h3c.com> Reviewed-by:
Changwei Ge <gechangwei@live.cn> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by:
-
Waiman Long authored
The following lockdep splat was observed when a certain hugetlbfs test was run: ================================ WARNING: inconsistent lock state 4.18.0-159.el8.x86_64+debug #1 Tainted: G W --------- - - -------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. swapper/30/0 [HC0[0]:SC1[1]:HE1:SE0] takes: ffffffff9acdc038 (hugetlb_lock){+.?.}, at: free_huge_page+0x36f/0xaa0 {SOFTIRQ-ON-W} state was registered at: lock_acquire+0x14f/0x3b0 _raw_spin_lock+0x30/0x70 __nr_hugepages_store_common+0x11b/0xb30 hugetlb_sysctl_handler_common+0x209/0x2d0 proc_sys_call_handler+0x37f/0x450 vfs_write+0x157/0x460 ksys_write+0xb8/0x170 do_syscall_64+0xa5/0x4d0 entry_SYSCALL_64_after_hwframe+0x6a/0xdf irq event stamp: 691296 hardirqs last enabled at (691296): [<ffffffff99bb034b>] _raw_spin_unlock_irqrestore+0x4b/0x60 hardirqs last disabled at (691295): [<ffffffff99bb0ad2>] _raw_spin_lock_irqsave+0x22/0x81 softirqs last enabled at (691284): [<ffffffff97ff0c63>] irq_enter+0xc3/0xe0 softirqs last disabled at (691285): [<ffffffff97ff0ebe>] irq_exit+0x23e/0x2b0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(hugetlb_lock); <Interrupt> lock(hugetlb_lock); *** DEADLOCK *** : Call Trace: <IRQ> __lock_acquire+0x146b/0x48c0 lock_acquire+0x14f/0x3b0 _raw_spin_lock+0x30/0x70 free_huge_page+0x36f/0xaa0 bio_check_pages_dirty+0x2fc/0x5c0 clone_endio+0x17f/0x670 [dm_mod] blk_update_request+0x276/0xe50 scsi_end_request+0x7b/0x6a0 scsi_io_completion+0x1c6/0x1570 blk_done_softirq+0x22e/0x350 __do_softirq+0x23d/0xad8 irq_exit+0x23e/0x2b0 do_IRQ+0x11a/0x200 common_interrupt+0xf/0xf </IRQ> Both the hugetbl_lock and the subpool lock can be acquired in free_huge_page(). One way to solve the problem is to make both locks irq-safe. However, Mike Kravetz had learned that the hugetlb_lock is held for a linear scan of ALL hugetlb pages during a cgroup reparentling operation. So it is just too long to have irq disabled unless we can break hugetbl_lock down into finer-grained locks with shorter lock hold times. Another alternative is to defer the freeing to a workqueue job. This patch implements the deferred freeing by adding a free_hpage_workfn() work function to do the actual freeing. The free_huge_page() call in a non-task context saves the page to be freed in the hpage_freelist linked list in a lockless manner using the llist APIs. The generic workqueue is used to process the work, but a dedicated workqueue can be used instead if it is desirable to have the huge page freed ASAP. Thanks to Kirill Tkhai <ktkhai@virtuozzo.com> for suggesting the use of llist APIs which simplfy the code. Link: http://lkml.kernel.org/r/20191217170331.30893-1-longman@redhat.comSigned-off-by:Waiman Long <longman@redhat.com> Reviewed-by:
Mike Kravetz <mike.kravetz@oracle.com> Acked-by:
Davidlohr Bueso <dbueso@suse.de> Acked-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
Navid Emamdoost authored
In the implementation of __gup_benchmark_ioctl() the allocated pages should be released before returning in case of an invalid cmd. Release pages via kvfree(). [akpm@linux-foundation.org: rework code flow, return -EINVAL rather than -1] Link: http://lkml.kernel.org/r/20191211174653.4102-1-navid.emamdoost@gmail.com Fixes: 714a3a1e ("mm/gup_benchmark.c: add additional pinning methods") Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Reviewed-by:
Ira Weiny <ira.weiny@intel.com> Reviewed-by:
John Hubbard <jhubbard@nvidia.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Signed-off-by:
-
Ilya Dryomov authored
pr_err() expects kB, but mm_pgtables_bytes() returns the number of bytes. As everything else is printed in kB, I chose to fix the value rather than the string. Before: [ pid ] uid tgid total_vm rss pgtables_bytes swapents oom_score_adj name ... [ 1878] 1000 1878 217253 151144 1269760 0 0 python ... Out of memory: Killed process 1878 (python) total-vm:869012kB, anon-rss:604572kB, file-rss:4kB, shmem-rss:0kB, UID:1000 pgtables:1269760kB oom_score_adj:0 After: [ pid ] uid tgid total_vm rss pgtables_bytes swapents oom_score_adj name ... [ 1436] 1000 1436 217253 151890 1294336 0 0 python ... Out of memory: Killed process 1436 (python) total-vm:869012kB, anon-rss:607516kB, file-rss:44kB, shmem-rss:0kB, UID:1000 pgtables:1264kB oom_score_adj:0 Link: http://lkml.kernel.org/r/20191211202830.1600-1-idryomov@gmail.com Fixes: 70cb6d26 ("mm/oom: add oom_score_adj and pgtables to Killed process message") Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
David Rientjes <rientjes@google.com> Acked-by:
-
Randy Dunlap authored
Fix kernel-doc warnings in fs/posix_acl.c. Also fix one typo (setgit -> setgid). fs/posix_acl.c:647: warning: Function parameter or member 'inode' not described in 'posix_acl_update_mode' fs/posix_acl.c:647: warning: Function parameter or member 'mode_p' not described in 'posix_acl_update_mode' fs/posix_acl.c:647: warning: Function parameter or member 'acl' not described in 'posix_acl_update_mode' Link: http://lkml.kernel.org/r/29b0dc46-1f28-a4e5-b1d0-ba2b65629779@infradead.org Fixes: 07393101 ("posix_acl: Clear SGID bit when setting file permissions") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Acked-by:
Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by:
Jan Kara <jack@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
