- 08 Jul, 2005 40 commits
-
-
Christophe Lucas authored
printk() calls should include appropriate KERN_* constant. Signed-off-by:
Christophe Lucas <clucas@rotomalug.org> Signed-off-by:
Domen Puncer <domen@coderock.org> Signed-off-by:
Johannes Stezenbach <js@linuxtv.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Oliver Endriss authored
av7110_fe_lock_fix() modified in a way that it can be retried after -ERESTARTSYS Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
Johannes Stezenbach authored
Fix indentation and add some whitepsace between operators. Signed-off-by:
-
Johannes Stezenbach authored
Change error handling in av7110_stop_feed() to stop as many filters as possible in case of errors. Signed-off-by:
-
Wolfgang Rohdewald authored
o propagate more errors back to caller or log them, mainly in av7110.c and av7110_av.c o fix error message in StartHWFilter o do not StopHWFilter for handle 0xffff Signed-off-by:
Wolfgang Rohdewald <wolfgang@rohdewald.de> Signed-off-by:
-
Johannes Stezenbach authored
Fix for QAM128 in VHF band suggested by Timo Helki. Signed-off-by:
-
Dr. Werner Fink authored
Fixed typo in AUDUIO_CONTINUE ioctl: AUDIO_CMD_MUTE -> AUDIO_CMD_UNMUTE Signed-off-by:
"Dr. Werner Fink" <werner@suse.de> Signed-off-by:
-
Johannes Stezenbach authored
Fix bug in timeout handling. Signed-off-by:
-
Wolfgang Rohdewald authored
o make sure ERESTARTSYS will be propagated o ReleaseBitmap: starting with Firmware 261e, also release when BMP_LOADING o removes unused #define BMP_LOADINGS o in many cases changed the return value from -1 to something more meaningful like ETIMEDOUT, EINVAL o changed syslog message timeout waiting for COMMAND such that it indicates what command did not complete o reduce # of arguments for LoadBitmap and BlitBitmap o av7110_osd_cmd: remove the out: label Signed-off-by:
-
Andrew de Quincey authored
Support for new TT DVB-T-CI, thanks to Andre Weidemann Signed-off-by:
Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by:
-
Andrew de Quincey authored
Add support for s5h1420 frontend (new Technotrend/Hauppauge DVB-S SE). Signed-off-by:
-
Adrian Bunk authored
The Coverity checker discovered that these two kfree's can never be executed. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Allan Stirling authored
Fix a bug that caused the polarization (V/H) to be interchanged. Signed-off-by:
Allan Stirling <Dibblahdvb0042@pendor.org> Signed-off-by:
Manu Abraham <manu@kromtek.com> Signed-off-by:
-
Manu Abraham authored
o Make the inversion setting specific, ie, only for the 200103A DVB-S This should not be flagged on other cards. o Make the frequency setting card specific o Make the bandwidth setting generic such that it supports more DVB-T cards o Set QAM size for DVB-C cards that do not autodetect QAM size o Fix a bug that caused the polarization not to be set. Set polarization for cards that do not autodetect polarization o Fix a bogus frontend signal lock, that caused a tuning delay as well. o Make the Symbolrate setting card specific Signed-off-by:
-
Patrick Boettcher authored
The flexcop chip often stops generating interrupts after some hours of operation. Apparently this can be fixed by resetting register block 0x300 at each channel change (this is not detailed in the flexcop data books). This patch also restructures DMA handling and adds a bit of debug code for the irq problem in case it still happens for someone. Signed-off-by:
Patrick Boettcher <pb@linuxtv.org> Signed-off-by:
-
Patrick Boettcher authored
Add big-endian register definitions for running on a PowerPC. (Thanks to Paavo Hartikainen for testing.) Signed-off-by:
-
Christophe Lucas authored
http://kerneljanitors.org/TODO - convert from pci_module_init to pci_register_driver Signed-off-by:
Christophe Lucas <c.lucas@ifrance.com> Signed-off-by:
-
Andreas Oberritter authored
Add driver for the Satelco Easywatch Mobile DVB-T card (based on Pluto2 chip). Signed-off-by:
Andreas Oberritter <obi@linuxtv.org> Signed-off-by:
-
Johannes Stezenbach authored
Increase some timeouts by a factor of 10 as suggested by Mikko Hamalainen and Timo Ketolainen, to improve tuning for QAM128 / weak signal. Signed-off-by:
-
Johannes Stezenbach authored
Disable zig-zag and set min_delay_ms = 4000 as suggested by Allan Guild to improve tuning with weak signal. Signed-off-by:
-
Patrick Boettcher authored
Add .get_tune_settings callback (min_delay_ms = 1sec) and output_mode-field (parallel/serial) to support cxusb; minor cleanups. Signed-off-by:
-
Hartmut Hackmann authored
o added preliminary support for tda827x tuners o set parameters for drift compensation to 0 makes no sense for DVB-T but can prevent lock Signed-off-by:
Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by:
-
Anssi Hannula authored
Add missing release_firmware() calls to fix memory leaks. Signed-off-by:
Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by:
-
Hartmut Hackmann authored
Fix limit for firmware version check was too low for tda10045. Signed-off-by:
-
Hartmut Hackmann authored
o added config options for IF frequency and AGC o support DSP boot from on board eeprom o added pll sleep call Signed-off-by:
-
Andrew de Quincey authored
Remove I2C_DRIVERID_DVBFE_ cruft. Signed-off-by:
-
Peter Beutner authored
- remove void casts - not necessary to set filter state twice to STATE_FREE during dvb_dmxdev_init() Signed-off-by:
Peter Beutner <p.beutner@gmx.net> Signed-off-by:
-
Peter Beutner authored
In dvb_dmxdev_filter_start if we go out because of an error, release previously allocated demux_feed. Signed-off-by:
-
Andrew de Quincey authored
Add workaround for signal lock loss issue, where the frontend loses the signal after some hours without any visible reason. Signed-off-by:
-
Peter Beutner authored
Fix a race condition where an application which issued a FE_READ_STATUS ioctl directly after FE_SET_FRONTEND would see an old status, i.e. FE_READ_STATUS would be executed before the frontend thread has even seen the tungin request from FE_SET_FRONTEND. Signed-off-by:
-
Johannes Stezenbach authored
Remove the skystar2 driver which has been obsoleted by the generalized flexcop-pci driver. Signed-off-by:
-
Martin Loschwitz authored
Fixed litte/big-endian conversion for raw remote-control keys. Signed-off-by:
Martin Loschwitz <madkiss@madkiss.org> Signed-off-by:
-
Miklos Szeredi authored
This patch renames _mntput() to something a little more descriptive: mntput_no_expire(). Signed-off-by:
Miklos Szeredi <miklos@szeredi.hu> Acked-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Miklos Szeredi authored
This patch renames vfsmount->mnt_fslink to something a little more descriptive: vfsmount->mnt_expire. Signed-off-by:
Mike Waychison <michael.waychison@sun.com> Signed-off-by:
-
Miklos Szeredi authored
Dcookies shouldn't play with the internals of dentry and vfsmnt refcounting. It defeats grepping, and is prone to break if implementation details change. In addition the function doesn't even seem to be performance critical: it calls kmem_cache_alloc(). Signed-off-by:
-
Miklos Szeredi authored
This patch sets ->mnt_namespace where it's actually added to the namespace. Previously mnt_namespace was set in do_kern_mount() even if the filesystem was never added to any process's namespace (most kernel-internal filesystems). This discrepancy doesn't actually cause any problems, but it's cleaner if mnt_namespace is NULL for these non exported filesystems. Signed-off-by:
-
Miklos Szeredi authored
This patch clears mnt_namespace in an expired mount. If mnt_namespace is not cleared, it's possible to attach a new mount to the already detached mount, because check_mnt() can return true. The effect is a resource leak, since the resulting tree will never be freed. Signed-off-by:
-
Miklos Szeredi authored
This patch fixes a bug noticed by Al Viro: However, we still have a problem here - just what would happen if vfsmount is detached while we were grabbing namespace semaphore? Refcount alone is not useful here - we might be held by whoever had detached the vfsmount. IOW, we should check that it's still attached (i.e. that mnt->mnt_parent != mnt). If it's not - just leave it alone, do mntput() and let whoever holds it deal with the sucker. No need to put it back on lists. Signed-off-by:
-
Miklos Szeredi authored
This patch splits the mark_mounts_for_expiry() function. It's too complex and too deeply nested, even without the bugfix in the following patch. Otherwise code is completely the same. Signed-off-by:
-
Miklos Szeredi authored
This patch simplifies mark_mounts_for_expiry() by using detach_mnt() instead of duplicating everything it does. It should be an equivalent transformation except for righting the dput/mntput order. Al Viro said: "Looks sane". Signed-off-by:
-
