Skip to content

L
linux
Switch branch/tag
  1. 11 Sep, 2009 2 commits
    • Tejun Heo's avatar
      block: implement mixed merge of different failfast requests · 80a761fd
      Tejun Heo authored 
      Failfast has characteristics from other attributes.  When issuing,
executing and successuflly completing requests, failfast doesn't make
any difference.  It only affects how a request is handled on failure.
Allowing requests with different failfast settings to be merged cause
normal IOs to fail prematurely while not allowing has performance
penalties as failfast is used for read aheads which are likely to be
located near in-flight or to-be-issued normal IOs.

This patch introduces the concept of 'mixed merge'.  A request is a
mixed merge if it is merge of segments which require different
handling on failure.  Currently the only mixable attributes are
failfast ones (or lack thereof).

When a bio with different failfast settings is added to an existing
request or requests of different failfast settings are merged, the
merged request is marked mixed.  Each bio carries failfast settings
and the request always tracks failfast state of the first bio.  When
the request fails, blk_rq_err_bytes() can be used to determine how
many bytes can be safely failed without crossing into an area which
requires further retrials.

This allows request merging regardless of failfast settings while
keeping the failure handling correct.

This patch only implements mixed merge but doesn't enable it.  The
next one will update SCSI to make use of mixed merge.
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Cc: Niel Lambrechts <niel.lambrechts@gmail.com>
Signed-off-by: default avatarJens Axboe <jens.axboe@oracle.com>
      80a761fd
    • Tejun Heo's avatar
      block: use the same failfast bits for bio and request · a82afdfc
      Tejun Heo authored 
      bio and request use the same set of failfast bits.  This patch makes
the following changes to simplify things.

* enumify BIO_RW* bits and reorder bits such that BIOS_RW_FAILFAST_*
  bits coincide with __REQ_FAILFAST_* bits.

* The above pushes BIO_RW_AHEAD out of sync with __REQ_FAILFAST_DEV
  but the matching is useless anyway.  init_request_from_bio() is
  responsible for setting FAILFAST bits on FS requests and non-FS
  requests never use BIO_RW_AHEAD.  Drop the code and comment from
  blk_rq_bio_prep().

* Define REQ_FAILFAST_MASK which is OR of all FAILFAST bits and
  simplify FAILFAST flags handling in init_request_from_bio().
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Signed-off-by: default avatarJens Axboe <jens.axboe@oracle.com>
      a82afdfc
  3. 10 Sep, 2009 3 commits
    • Geert Uytterhoeven's avatar
      md: Fix "strchr" [drivers/md/dm-log-userspace.ko] undefined! · 0d03d59d
      Geert Uytterhoeven authored 
      Commit b8313b6d ("dm log: remove incorrect
field from userspace table output") added a call to strstr() with a
single-character "needle" string parameter.

Unfortunately some versions of gcc replace such calls to strstr() by calls
to strchr() behind our back.  This causes linking errors if strchr() is
defined as an inline function in <asm/string.h> (e.g. on m68k):

| WARNING: "strchr" [drivers/md/dm-log-userspace.ko] undefined!

Avoid this by explicitly calling strchr() instead.
Signed-off-by: default avatarGeert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@kernel.org
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      0d03d59d
    • Linus Torvalds's avatar
      Merge branch 'lookup-permissions-cleanup' · 526b6780
      Linus Torvalds authored 
      * lookup-permissions-cleanup:
  jffs2/jfs/xfs: switch over to 'check_acl' rather than 'permission()'
  ext[234]: move over to 'check_acl' permission model
  shmfs: use 'check_acl' instead of 'permission'
  Make 'check_acl()' a first-class filesystem op
  Simplify exec_permission_lite(), part 3
  Simplify exec_permission_lite() further
  Simplify exec_permission_lite() logic
  Do not call 'ima_path_check()' for each path component
      526b6780
    • Roland McGrath's avatar
      binfmt_elf: fix PT_INTERP bss handling · 752015d1
      Roland McGrath authored 
      In fs/binfmt_elf.c, load_elf_interp() calls padzero() for .bss even if
the PT_LOAD has no PROT_WRITE and no .bss.  This generates EFAULT.

Here is a small test case.  (Yes, there are other, useful PT_INTERP
which have only .text and no .data/.bss.)

	----- ptinterp.S
	_start: .globl _start
		 nop
		 int3
	-----
	$ gcc -m32 -nostartfiles -nostdlib -o ptinterp ptinterp.S
	$ gcc -m32 -Wl,--dynamic-linker=ptinterp -o hello hello.c
	$ ./hello
	Segmentation fault  # during execve() itself

	After applying the patch:
	$ ./hello
	Trace trap  # user-mode execution after execve() finishes

If the ELF headers are actually self-inconsistent, then dying is fine.
But having no PROT_WRITE segment is perfectly normal and correct if
there is no segment with p_memsz > p_filesz (i.e. bss).  John Reiser
suggested checking for PROT_WRITE in the bss logic.  I think it makes
most sense to simply apply the bss logic only when there is bss.

This patch looks less trivial than it is due to some reindentation.
It just moves the "if (last_bss > elf_bss) {" test up to include the
partial-page bss logic as well as the more-pages bss logic.
Reported-by: default avatarJohn Reiser <jreiser@bitwagon.com>
Signed-off-by: default avatarRoland McGrath <roland@redhat.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      752015d1
  5. 09 Sep, 2009 3 commits
    • Linus Torvalds's avatar
      Linux 2.6.31 · 74fca6a4
      Linus Torvalds authored
      74fca6a4
    • Ed Cashin's avatar
      aoe: allocate unused request_queue for sysfs · 7135a71b
      Ed Cashin authored 
      Andy Whitcroft reported an oops in aoe triggered by use of an
incorrectly initialised request_queue object:

  [ 2645.959090] kobject '<NULL>' (ffff880059ca22c0): tried to add
		an uninitialized object, something is seriously wrong.
  [ 2645.959104] Pid: 6, comm: events/0 Not tainted 2.6.31-5-generic #24-Ubuntu
  [ 2645.959107] Call Trace:
  [ 2645.959139] [<ffffffff8126ca2f>] kobject_add+0x5f/0x70
  [ 2645.959151] [<ffffffff8125b4ab>] blk_register_queue+0x8b/0xf0
  [ 2645.959155] [<ffffffff8126043f>] add_disk+0x8f/0x160
  [ 2645.959161] [<ffffffffa01673c4>] aoeblk_gdalloc+0x164/0x1c0 [aoe]

The request queue of an aoe device is not used but can be allocated in
code that does not sleep.

Bruno bisected this regression down to

  cd43e26f

  block: Expose stacked device queues in sysfs

"This seems to generate /sys/block/$device/queue and its contents for
 everyone who is using queues, not just for those queues that have a
 non-NULL queue->request_fn."

Addresses http://bugs.launchpad.net/bugs/410198
Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13942

Note that embedding a queue inside another object has always been
an illegal construct, since the queues are reference counted and
must persist until the last reference is dropped. So aoe was
always buggy in this respect (Jens).
Signed-off-by: default avatarEd Cashin <ecashin@coraid.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Bruno Premont <bonbons@linux-vserver.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarJens Axboe <jens.axboe@oracle.com>
      7135a71b
    • Linus Torvalds's avatar
      i915: disable interrupts before tearing down GEM state · e6890f6f
      Linus Torvalds authored 
      Reinette Chatre reports a frozen system (with blinking keyboard LEDs)
when switching from graphics mode to the text console, or when
suspending (which does the same thing). With netconsole, the oops
turned out to be

	BUG: unable to handle kernel NULL pointer dereference at 0000000000000084
	IP: [<ffffffffa03ecaab>] i915_driver_irq_handler+0x26b/0xd20 [i915]

and it's due to the i915_gem.c code doing drm_irq_uninstall() after
having done i915_gem_idle(). And the i915_gem_idle() path will do

  i915_gem_idle() ->
    i915_gem_cleanup_ringbuffer() ->
      i915_gem_cleanup_hws() ->
        dev_priv->hw_status_page = NULL;

but if an i915 interrupt comes in after this stage, it may want to
access that hw_status_page, and gets the above NULL pointer dereference.

And since the NULL pointer dereference happens from within an interrupt,
and with the screen still in graphics mode, the common end result is
simply a silently hung machine.

Fix it by simply uninstalling the irq handler before idling rather than
after. Fixes

    http://bugzilla.kernel.org/show_bug.cgi?id=13819Reported-and-tested-by: default avatarReinette Chatre <reinette.chatre@intel.com>
Acked-by: default avatarJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      e6890f6f
  7. 08 Sep, 2009 9 commits
  9. 07 Sep, 2009 7 commits
  11. 06 Sep, 2009 1 commit
    • David S. Miller's avatar
      gianfar: Fix build. · d9d8e041
      David S. Miller authored 
      Reported by Michael Guntsche <mike@it-loops.com>

--------------------
Commit
38bddf04 gianfar: gfar_remove needs to call unregister_netdev()

breaks the build of the gianfar driver because "dev" is undefined in
this function. To quickly test rc9 I changed this to priv->ndev but I do
not know if this is the correct one.
--------------------
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d9d8e041
  13. 05 Sep, 2009 15 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7