- 26 Jul, 2013 12 commits
-
-
H Hartley Sweeten authored
Rename the local variable used for the private data pointer to the comedi "norm". Remove the unnecessary sanity check of the private data pointer. This function can only be called is the private data was allocated during the attach. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Use the comedi_range_is_bipolar() helper instead of checking the 'range' index against a magic number. Also, use the s->maxdata to calculate the value needed to munge the value for bipolar data instead of the magic number. Signed-off-by:
-
H Hartley Sweeten authored
Rename the local variable used for the private data pointer to the comedi "norm". Remove the unnecessary sanity check of the private data pointer. This function can only be called is the private data was allocated during the attach. Tidy up the exit path using goto to ensure that the semaphore is released. Return -EBUSY instead of 0 if the (*insn_read) cannot be done because a command is running. Signed-off-by:
-
H Hartley Sweeten authored
Rename the local variable used for the private data pointer to the comedi "norm". Remove the unnecessary sanity check of the private data pointer. This function can only be called is the private data was allocated during the attach. Tidy up the exit path using goto to ensure that the semaphore is released. Signed-off-by:
-
H Hartley Sweeten authored
Rename the local variable used for the private data pointer to the comedi "norm". Remove the unnecessary sanity check of the private data pointer. This function can only be called is the private data was allocated during the attach. Tidy up the exit path using goto to ensure that the semaphore is released. Return -EBUSY if an ai command is already running. Signed-off-by:
-
H Hartley Sweeten authored
As pointed out by Ian Abbott, the *_cmd_running flags should be set before submitting the urbs. There is a possible race condition where an urb could complete and the flag is checked in the completion routine before it's set. Reported-by:
-
Wei Yongjun authored
A spin lock is taken here so we should use GFP_ATOMIC. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Ian Abbott authored
The COMEDI_NI_ATMIO configuration option causes the "ni_atmio" module to be built, which handles various National Instruments ISA-PNP data acquisition cards. The configuration option currently depends on ISAPNP. The "ni_atmio" module is a "legacy" comedi driver with no auto-configuration support and it doesn't register as a PNP card driver. The only difference in initialization from the other comedi ISA card drivers is that it will use the ISA-PNP functions to find, attach and activate the card if no I/O base address has been specified by the user in the COMEDI_DEVCONFIG ioctl. The module compiles fine without the ISAPNP configuration option as the <linux/isapnp.h> and <linux/pnp.h> headers provide dummy inline functions if the ISAPNP and PNP options, respectively, are not enabled. Remove the dependancy on the ISAPNP option since the module builds without it and can be used without it. (There is a very slim chance that comedi will support proper ISA PNP drivers one day, in which case the ni_atmio driver could be converted to use this support and not support manual configuration. However, not all the PnP IDs of boards supported by this driver are currently known to us.) Signed-off-by:
-
Ian Abbott authored
The COMEDI_NI_ATMIO16D configuration option causes the "ni_atmio16d" module to be built, which handles the National Instruments AT-MIO-16 and AT-MIO-16D cards. The configuration option currently depends on ISAPNP, but the module doesn't use any ISAPNP functions and the cards are legacy ISA cards with base I/O port, IRQ and DMA channel configured by jumpers. (The driver doesn't use DMA though.) Remove the ISADNP dependancy from COMEDI_NI_ATMIO16D and fix up the help text - the card names are missing a dash and they're not ISA-PNP. Signed-off-by:
-
Shaun Laing authored
Resolves warnings from the "sparse" checker of the form "warning: cast to restricted __le??". Signed-off-by:
Shaun Laing <shaun@xresource.ca> Reviewed-by:
-
Eli Billauer authored
Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Eli Billauer <eli.billauer@gmail.com> Signed-off-by:
-
Greg Kroah-Hartman authored
As reported, this driver causes problems when built into the kernel, so force it to be a module until those issues are fixed. Also delete the "default n" lines in the Kconfig, as they are not needed. Reported-by:
-
- 25 Jul, 2013 28 commits
-
-
Eli Billauer authored
This is the driver for Xillybus, which is a general-purpose interface for data communication with FPGAs (programmable logic). Please refer to the README included in this patch for a detailed explanation. It was previously submitted for misc-devices, but it appears like noone's willing to review the code (which I can understand, given its magnitude). Hence submitted as a staging driver. Signed-off-by:
-
Rupesh Gujare authored
This patch fixes coding style issues reported by Dan here:- http://driverdev.linuxdriverproject.org/pipermail/driverdev-devel/2012-June/027767.htmlReported-by:
Rupesh Gujare <rupesh.gujare@atmel.com> Signed-off-by:
-
Malcolm Priestley authored
DBG_PORT80 is always defined as empty macro because VIAWET_DEBUG is never defined. Remove it and VIAWET_DEBUG. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Malcolm Priestley authored
ASSERT is always defined as empty macro because VIAWET_DEBUG is never defined. Signed-off-by:
-
Konrad Rzeszutek Wilk authored
Greg spotted that said driver is not subscribing to the automagic mechanism of auto-loading if a user tries to open /dev/zram. This fixes it. CC: Minchan Kim <minchan@kernel.org> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Jens Frederich authored
The resolution of msleep is related to HZ, so with HZ set to 100 any msleep of less then 10ms will become ~10ms. This is not what we want. Use usleep_range to get more control of what is happening here. Signed-off-by:
Jens Frederich <jfrederich@gmail.com> Signed-off-by:
-
Matthijs Kooijman authored
There was some code that cleared the dma_mask when dma was disabled in the driver. Given that clearing the mask doesn't actually tell the usb core we're not using dma, and a previous commit explicitely sets the hcd->self.uses_dma value, it seems these values are unneeded and can only potentially cause problems (when reloading a module, for example). Signed-off-by:
Matthijs Kooijman <matthijs@stdin.nl> Acked-by:
Paul Zimmerman <Paul.Zimmerman@synopsys.com> Signed-off-by:
-
Daniel Vetter authored
This thing seems to do some kind of delayed setup. Really, real kms drivers shouldn't do that at all. Either stuff needs to be dynamically hotplugged or the driver setup sequence needs to be fixed. This patch here just moves the setup at the very end of the driver load callback, with the locking adjusted accordingly. v2: Also move the corresponding put from ->lastclose to ->unload. Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Fabio Estevam authored
Add MODULE_ALIAS, so that auto module loading can work. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Acked-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
-
Fabio Estevam authored
clk_prepare_enable() may fail, so let's check its return value and propagate it in the case of error. Signed-off-by:
-
Fabio Estevam authored
Instead of jumping to goto labels, just return the error code directly. Signed-off-by:
-
Fabio Estevam authored
As devm_ioremap_resource() is used on probe, there is no need to explicitly check the return value from platform_get_resource(), as this is something that devm_ioremap_resource() takes care by itself. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Fabio Estevam authored
LVDS Display Bridge is currently supported, so remove it from the missing features list. Signed-off-by:
-
Fabio Estevam authored
Fix the following sparse warnings: drivers/staging/imx-drm/imx-tve.c:133:13: warning: context imbalance in 'tve_lock' - wrong count at exit drivers/staging/imx-drm/imx-tve.c:139:13: warning: context imbalance in 'tve_unlock' - unexpected unlock Signed-off-by:
-
Fabio Estevam authored
IPUv3 has a total of 3 flows (one synchronous flow and 2 asynchronous flows). Let's add a definition for such number in order to let the code easier to understand. Signed-off-by:
-
Fabio Estevam authored
No need to have braces for a single line 'if' block Signed-off-by:
-
Fabio Estevam authored
devm_kzalloc() may fail, so let's check its return value. Signed-off-by:
-
Fabio Estevam authored
When building imx_v6_v7_defconfig with imx-drm drivers selected as modules, we get the following build error: ERROR: "imx_drm_encoder_get_mux_id" [drivers/staging/imx-drm/imx-ldb.ko] undefined! Export the required function to avoid this problem. Signed-off-by:
-
Geert Uytterhoeven authored
sparc64 allmodconfig: drivers/staging/comedi/drivers/addi_apci_2032.c: In function 'apci2032_auto_attach': drivers/staging/comedi/drivers/addi_apci_2032.c:328:3: error: implicit declaration of function 'kzalloc' [-Werror=implicit-function-declaration] drivers/staging/comedi/drivers/addi_apci_2032.c:328:11: warning: assignment makes pointer from integer without a cast [enabled by default] drivers/staging/comedi/drivers/addi_apci_2032.c: In function 'apci2032_detach': drivers/staging/comedi/drivers/addi_apci_2032.c:350:3: error: implicit declaration of function 'kfree' [-Werror=implicit-function-declaration] drivers/staging/comedi/drivers/amplc_pci224.c: In function 'pci224_attach_common': drivers/staging/comedi/drivers/amplc_pci224.c:1289:2: error: implicit declaration of function 'kmalloc' [-Werror=implicit-function-declaration] drivers/staging/comedi/drivers/amplc_pci224.c:1289:23: warning: assignment makes pointer from integer without a cast [enabled by default] drivers/staging/comedi/drivers/amplc_pci224.c:1296:24: warning: assignment makes pointer from integer without a cast [enabled by default] drivers/staging/comedi/drivers/amplc_pci224.c:1303:25: warning: assignment makes pointer from integer without a cast [enabled by default] drivers/staging/comedi/drivers/amplc_pci224.c:1348:42: warning: assignment makes pointer from integer without a cast [enabled by default] drivers/staging/comedi/drivers/amplc_pci224.c: In function 'pci224_detach': drivers/staging/comedi/drivers/amplc_pci224.c:1474:3: error: implicit declaration of function 'kfree' [-Werror=implicit-function-declaration] Introduced by commit 0bdab509 ("staging: comedi: use comedi_alloc_devpriv()"), which removed some inclusions of <linux/slab.h>. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by:
-
H Hartley Sweeten authored
Tidy up the multi-line comments at the beginning of the file and remove any irrelevant information. Fix the II20K_ID_PCI200341M_1 define, there are one to many 0's. Rename all the remaining pci20xxx_* to ii20k_*. The "pci" just adds confusion, this is not a PCI board. Remove the private (*detach) function. It's safe to call the comedi core provided comedi_legacy_detach() even if there is nothing to cleanup. Signed-off-by:
-
H Hartley Sweeten authored
The PCI-200341M-1 module can both provide an analog input subdevice in this driver. The module provides four differential input channels with four programmable gains. Currently the gain is configured as an option passed when the board is attached. Rewrite the ai subdevice support functions to properly handle the programmable gain. For aesthetics, redefine the memory map for the module. Signed-off-by:
-
H Hartley Sweeten authored
The PCI-20006M-1 and PCI-20006M-2 modules can both provide an analog output subdevice in this driver. Fix the module init code to detect both of them. The analog output can support +/-5, 0-10, or +/-10 volt ranges depending on jumpers on the board. Report all the ranges to the user instead of relying on the configuration options to set the range. The user can then select the appropriate range depending on how they have configured the hardware. Tidy up the (*insn_{read,write})() functions to work like the comedi core expects. Signed-off-by: -
H Hartley Sweeten authored
The union used for the subdevice private data just adds confusion. Split the union into two separate private data structs. Signed-off-by:
-
H Hartley Sweeten authored
The 'iobase' can be calculated when needed. Remove it from the subdevice private data. Signed-off-by:
-
H Hartley Sweeten authored
Use the carrier board id to determine if a module is installed for a given subdevice. Consolidate the module init code into ii20k_init_module(). For aesthetic reasons, rename the subdevice functions to remove 'pci' from them. Signed-off-by:
-
H Hartley Sweeten authored
For asethetics, redefine the register map for the carrier board. The 'PCI*' names lead one to think this is a PCI board not a legacy ISA board. Remove the #if 0'd out pci20xxx_{do,di}() functions. They are not needed. Rename, and fix, the pci20xxx_dio_config() function. The control and direction registers are not readable. Use the new register map defines instead of the crazy bit shifts. Rename, and fix, the pci20xxx_dio_insn_config() function. This function should treat data[0] as the 'instruction' to handle not just use it to determine if the port is an input or output. Rename, and tix, the pci20xxx_dio_insn_bits() function. The 'state' only needs to be updated if the 'mask' indicates. For aesthetics, abosrb the pci20xxx_dio_init() into the (*attach) function. Fix the carrier board id detect in the (*attach). There are two carrier board types, one with 32 dio channels and one without. Use this info when setting up the dio subdevice. Signed-off-by: -
H Hartley Sweeten authored
This macro is not used, and it looks to much like the comedi CR_CHAN macro. Just remove it. Signed-off-by:
-
H Hartley Sweeten authored
For aesthetic reasons, move the static const data to the head of the file. Signed-off-by:
-
