RFC3873 defined SCTP_MIB_OUTOFBLUES:

 sctpOutOfBlues OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
        "The number of out of the blue packets received by the host.
        An out of the blue packet is an SCTP packet correctly formed,
        including the proper checksum, but for which the receiver was
        unable to identify an appropriate association."
   REFERENCE
        "Section 8.4 in RFC2960 deals with the Out-Of-The-Blue
         (OOTB) packet definition and procedures."

But OOTB packet INIT, INIT-ACK and SHUTDOWN-ACK(COOKIE-WAIT or
COOKIE-ECHOED state) are not counted by SCTP_MIB_OUTOFBLUES.

Case 1(INIT):

Endpoint A               Endpoint B
(CLOSED)                 (CLOSED)

 INIT     ---------->
          <----------    ABORT

Case 2(INIT-ACK):

Endpoint A               Endpoint B
(CLOSED)                 (CLOSED)

 INIT-ACK  ---------->
           <----------   ABORT

Case 3(SHUTDOWN-ACK):

Endpoint A               Endpoint B
(CLOSED)                 (CLOSED)

          <----------    INIT
 SHUTDOWN-ACK  ---------->
           <----------   SHUTDOWN-COMPLETE

Case 4(SHUTDOWN-ACK):

Endpoint A               Endpoint B
(CLOSED)                 (COOKIE-ECHOED)

 SHUTDOWN-ACK  ---------->
           <----------   SHUTDOWN-COMPLETE

This patch fixed the problem.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>

RFC 4960: Section 9.2
The sender of the SHUTDOWN MAY also start an overall guard timer
'T5-shutdown-guard' to bound the overall time for the shutdown
sequence.  At the expiration of this timer, the sender SHOULD abort
the association by sending an ABORT chunk.  If the 'T5-shutdown-
guard' timer is used, it SHOULD be set to the recommended value of 5
times 'RTO.Max'.

The timer 'T5-shutdown-guard' is used to counter the overall time
for shutdown sequence, and it's start by the sender of the SHUTDOWN.
So timer 'T5-shutdown-guard' should be start when we send the first
SHUTDOWN chunk and enter the SHUTDOWN-SENT state, not start when we
receipt of the SHUTDOWN primitive and enter SHUTDOWN-PENDING state.

If 'T5-shutdown-guard' timer is start at SHUTDOWN-PENDING state, the
association may be ABORT while data is still transmitting.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>

sctp_is_any() function that is used to check for wildcard addresses
only looks at the address itself to determine the address family.
This function is used in the API to check the address passed in from
the user.  If the user simply zerroes out the sockaddr_storage and
pass that in, we'll end up failing.  So, let's try harder to determine
the address family by also checking the socket if it's possible.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>

sctp_chunks should be put on a diet.  This is some of the low hanging
fruit that we can strip out.  Changes all the __s8/__u8 flags to
bitfields.  Saves 12 bytes per chunk.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>

Chunks placed on the retransmit list are marked as inelegible
for fast retrasnmission.   Since missing indications determine
when fast reransmission is done, there is not point in calling
sctp_mark_missing() on the retransmit list since those chunks
will not be marked.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>

There is a possibility of walking the transport list twice during
SACK processing when doing SFR-CACC algorithm.  We can restructure
the code to only do this once.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>

Frist small step in optimizing SACK processing.   Do not call
sctp_mark_missing() when there are no gaps reported and thus
not missing chunks.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>

The iptables tproxy code has to be able to do UDP socket hash lookups,
so we have to provide an exported lookup function for this purpose.
Signed-off-by: KOVACS Krisztian <hidden@sch.bme.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Current TCP code relies on the local port of the listening socket
being the same as the destination address of the incoming
connection. Port redirection used by many transparent proxying
techniques obviously breaks this, so we have to store the original
destination port address.

This patch extends struct inet_request_sock and stores the incoming
destination port value there. It also modifies the handshake code to
use that value as the source port when sending reply packets.
Signed-off-by: KOVACS Krisztian <hidden@sch.bme.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Netfilter's ip_route_me_harder() tries to re-route packets either
generated or re-routed by Netfilter. This patch changes
ip_route_me_harder() to handle packets from non-locally-bound sockets
with IP_TRANSPARENT set as local and to set the appropriate flowi
flags when re-doing the routing lookup.
Signed-off-by: KOVACS Krisztian <hidden@sch.bme.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

The TCP stack sends out SYN+ACK/ACK/RST reply packets in response to
incoming packets. The non-local source address check on output bites
us again, as replies for transparently redirected traffic won't have a
chance to leave the node.

This patch selectively sets the FLOWI_FLAG_ANYSRC flag when doing the
route lookup for those replies. Transparent replies are enabled if the
listening socket has the transparent socket flag set.
Signed-off-by: KOVACS Krisztian <hidden@sch.bme.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Set FLOWI_FLAG_ANYSRC in flowi->flags if the socket has the
transparent socket option set. This way we selectively enable certain
connections with non-local source addresses to be routed.
Signed-off-by: KOVACS Krisztian <hidden@sch.bme.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

inet_iif() in inet_sock.h requires route.h. Since users of inet_iif()
usually require other route.h functionality anyway this patch moves
inet_iif() to route.h.
Signed-off-by: KOVACS Krisztian <hidden@sch.bme.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Setting IP_TRANSPARENT is not really useful without allowing non-local
binds for the socket. To make user-space code simpler we allow these
binds even if IP_TRANSPARENT is set but IP_FREEBIND is not.
Signed-off-by: Tóth László Attila <panther@balabit.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch introduces the IP_TRANSPARENT socket option: enabling that
will make the IPv4 routing omit the non-local source address check on
output. Setting IP_TRANSPARENT requires NET_ADMIN capability.
Signed-off-by: KOVACS Krisztian <hidden@sch.bme.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip_route_output() contains a check to make sure that no flows with
non-local source IP addresses are routed. This obviously makes using
such addresses impossible.

This patch introduces a flowi flag which makes omitting this check
possible. The new flag provides a way of handling transparent and
non-transparent connections differently.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: KOVACS Krisztian <hidden@sch.bme.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the caller of pskb_expand_head specifies a negative nhead
we'll silently overwrite other people's memory.  This patch
makes it BUG instead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Herbert Xu came up with the idea and the original patch to make
xfrm_state dump list contain also dumpers:

As it is we go to extraordinary lengths to ensure that states
don't go away while dumpers go to sleep.  It's much easier if
we just put the dumpers themselves on the list since they can't
go away while they're going.

I've also changed the order of addition on new states to prevent
a never-ending dump.

Timo Teräs improved the patch to apply cleanly to latest tree,
modified iteration code to be more readable by using a common
struct for entries in the list, implemented the same idea for
xfrm_policy dumping and moved the af_key specific "last" entry
caching to af_key.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Timo Teras <timo.teras@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>

Conflicts:

	drivers/net/wireless/ath9k/core.c
	drivers/net/wireless/ath9k/main.c
	net/core/dev.c

Fix a xfrm_{state,policy}_walk leak if pfkey socket is closed while
dumping is on-going.
Signed-off-by: Timo Teras <timo.teras@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>

$ diff-funcs ip6qhashfn reassembly.c netfilter/nf_conntrack_reasm.c
 --- reassembly.c:ip6qhashfn()
 +++ netfilter/nf_conntrack_reasm.c:ip6qhashfn()
@@ -1,5 +1,5 @@
-static unsigned int ip6qhashfn(__be32 id, struct in6_addr *saddr,
-			       struct in6_addr *daddr)
+static unsigned int ip6qhashfn(__be32 id, const struct in6_addr *saddr,
+			       const struct in6_addr *daddr)
 {
 	u32 a, b, c;

@@ -9,7 +9,7 @@

 	a += JHASH_GOLDEN_RATIO;
 	b += JHASH_GOLDEN_RATIO;
-	c += ip6_frags.rnd;
+	c += nf_frags.rnd;
 	__jhash_mix(a, b, c);

 	a += (__force u32)saddr->s6_addr32[3];

And codiff xx.o.old xx.o.new:

net/ipv6/netfilter/nf_conntrack_reasm.c:
  ip6qhashfn         | -512
  nf_hashfn          |   +6
  nf_ct_frag6_gather |  +36
 3 functions changed, 42 bytes added, 512 bytes removed, diff: -470
net/ipv6/reassembly.c:
  ip6qhashfn    | -512
  ip6_hashfn    |   +7
  ipv6_frag_rcv |  +89
 3 functions changed, 96 bytes added, 512 bytes removed, diff: -416

net/ipv6/reassembly.c:
  inet6_hash_frag | +510
 1 function changed, 510 bytes added, diff: +510

Total: -376

Compile tested.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip6_dst_blackhole_ops.kmem_cachep is not expected to be NULL (i.e. to
be initialized) when dst_alloc() is called from ip6_dst_blackhole().
Otherwise, it results in the following (xfrm_larval_drop is now set to
1 by default):

[   78.697642] Unable to handle kernel paging request for data at address 0x0000004c
[   78.703449] Faulting instruction address: 0xc0097f54
[   78.786896] Oops: Kernel access of bad area, sig: 11 [#1]
[   78.792791] PowerMac
[   78.798383] Modules linked in: btusb usbhid bluetooth b43 mac80211 cfg80211 ehci_hcd ohci_hcd sungem sungem_phy usbcore ssb
[   78.804263] NIP: c0097f54 LR: c0334a28 CTR: c002d430
[   78.809997] REGS: eef19ad0 TRAP: 0300   Not tainted  (2.6.27-rc5)
[   78.815743] MSR: 00001032 <ME,IR,DR>  CR: 22242482  XER: 20000000
[   78.821550] DAR: 0000004c, DSISR: 40000000
[   78.827278] TASK = eef0df40[3035] 'mip6d' THREAD: eef18000
[   78.827408] GPR00: 00001032 eef19b80 eef0df40 00000000 00008020 eef19c30 00000001 00000000
[   78.833249] GPR08: eee5101c c05a5c10 ef9ad500 00000000 24242422 1005787c 00000000 1004f960
[   78.839151] GPR16: 00000000 10024e90 10050040 48030018 0fe44150 00000000 00000000 eef19c30
[   78.845046] GPR24: eef19e44 00000000 eef19bf8 efb37c14 eef19bf8 00008020 00009032 c0596064
[   78.856671] NIP [c0097f54] kmem_cache_alloc+0x20/0x94
[   78.862581] LR [c0334a28] dst_alloc+0x40/0xc4
[   78.868451] Call Trace:
[   78.874252] [eef19b80] [c03c1810] ip6_dst_lookup_tail+0x1c8/0x1dc (unreliable)
[   78.880222] [eef19ba0] [c0334a28] dst_alloc+0x40/0xc4
[   78.886164] [eef19bb0] [c03cd698] ip6_dst_blackhole+0x28/0x1cc
[   78.892090] [eef19be0] [c03d9be8] rawv6_sendmsg+0x75c/0xc88
[   78.897999] [eef19cb0] [c038bca4] inet_sendmsg+0x4c/0x78
[   78.903907] [eef19cd0] [c03207c8] sock_sendmsg+0xac/0xe4
[   78.909734] [eef19db0] [c03209e4] sys_sendmsg+0x1e4/0x2a0
[   78.915540] [eef19f00] [c03220a8] sys_socketcall+0xfc/0x210
[   78.921406] [eef19f40] [c0014b3c] ret_from_syscall+0x0/0x38
[   78.927295] --- Exception: c01 at 0xfe2d730
[   78.927297]     LR = 0xfe2d71c
[   78.939019] Instruction dump:
[   78.944835] 91640018 9144001c 900a0000 4bffff44 9421ffe0 7c0802a6 bf810010 7c9d2378
[   78.950694] 90010024 7fc000a6 57c0045e 7c000124 <83e3004c> 8383005c 2f9f0000 419e0050
[   78.956464] ---[ end trace 05fa1ed7972487a1 ]---

As commented by Benjamin Thery, the bug was introduced by
f2fc6a54, while adding network
namespaces support to ipv6 routes.
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Acked-by: Benjamin Thery <benjamin.thery@bull.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

This gives a nice increase in the maximum loss-free packet forwarding
rate in routing workloads.
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds skb_recycle_check(), which can be used by a network
driver after transmitting an skb to check whether this skb can be
recycled as a receive buffer.

skb_recycle_check() checks that the skb is not shared or cloned, and
that it is linear and its head portion large enough (as determined by
the driver) to be recycled as a receive buffer.  If these conditions
are met, it does any necessary reference count dropping and cleans
up the skbuff as if it just came from __alloc_skb().
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The following actions are possible:
tcp_v6_rcv
  skb->dev = NULL;
  tcp_v6_do_rcv
    tcp_v6_hnd_req
      tcp_check_req
        req->rsk_ops->send_ack == tcp_v6_send_ack

So, skb->dev can be NULL in tcp_v6_send_ack. We must obtain namespace
from dst entry.

Thanks to Vitaliy Gusev <vgusev@openvz.org> for initial problem finding
in IPv4 code.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix NULL dereference in tcp_4_send_ack().

As skb->dev is reset to NULL in tcp_v4_rcv() thus OOPS occurs:

BUG: unable to handle kernel NULL pointer dereference at 00000000000004d0
IP: [<ffffffff80498503>] tcp_v4_send_ack+0x203/0x250

Stack:  ffff810005dbb000 ffff810015c8acc0 e77b2c6e5f861600 a01610802e90cb6d
 0a08010100000000 88afffff88afffff 0000000080762be8 0000000115c872e8
 0004122000000000 0000000000000001 ffffffff80762b88 0000000000000020
Call Trace:
 <IRQ>  [<ffffffff80499c33>] tcp_v4_reqsk_send_ack+0x20/0x22
 [<ffffffff8049bce5>] tcp_check_req+0x108/0x14c
 [<ffffffff8047aaf7>] ? rt_intern_hash+0x322/0x33c
 [<ffffffff80499846>] tcp_v4_do_rcv+0x399/0x4ec
 [<ffffffff8045ce4b>] ? skb_checksum+0x4f/0x272
 [<ffffffff80485b74>] ? __inet_lookup_listener+0x14a/0x15c
 [<ffffffff8049babc>] tcp_v4_rcv+0x6a1/0x701
 [<ffffffff8047e739>] ip_local_deliver_finish+0x157/0x24a
 [<ffffffff8047ec9a>] ip_local_deliver+0x72/0x7c
 [<ffffffff8047e5bd>] ip_rcv_finish+0x38d/0x3b2
 [<ffffffff803d3548>] ? scsi_io_completion+0x19d/0x39e
 [<ffffffff8047ebe5>] ip_rcv+0x2a2/0x2e5
 [<ffffffff80462faa>] netif_receive_skb+0x293/0x303
 [<ffffffff80465a9b>] process_backlog+0x80/0xd0
 [<ffffffff802630b4>] ? __rcu_process_callbacks+0x125/0x1b4
 [<ffffffff8046560e>] net_rx_action+0xb9/0x17f
 [<ffffffff80234cc5>] __do_softirq+0xa3/0x164
 [<ffffffff8020c52c>] call_softirq+0x1c/0x28
 <EOI>  [<ffffffff8020de1c>] do_softirq+0x34/0x72
 [<ffffffff80234b8e>] local_bh_enable_ip+0x3f/0x50
 [<ffffffff804d43ca>] _spin_unlock_bh+0x12/0x14
 [<ffffffff804599cd>] release_sock+0xb8/0xc1
 [<ffffffff804a6f9a>] inet_stream_connect+0x146/0x25c
 [<ffffffff80243078>] ? autoremove_wake_function+0x0/0x38
 [<ffffffff8045751f>] sys_connect+0x68/0x8e
 [<ffffffff80291818>] ? fd_install+0x5f/0x68
 [<ffffffff80457784>] ? sock_map_fd+0x55/0x62
 [<ffffffff8020b39b>] system_call_after_swapgs+0x7b/0x80

Code: 41 10 11 d0 83 d0 00 4d 85 ed 89 45 c0 c7 45 c4 08 00 00 00 74 07 41 8b 45 04 89 45 c8 48 8b 43 20 8b 4d b8 48 8d 55 b0 48 89 de <48> 8b 80 d0 04 00 00 48 8b b8 60 01 00 00 e8 20 ae fe ff 65 48
RIP  [<ffffffff80498503>] tcp_v4_send_ack+0x203/0x250
 RSP <ffffffff80762b78>
CR2: 00000000000004d0
Signed-off-by: Vitaliy Gusev <vgusev@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

From: Remi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

 * Add support for AR2417 (include pci id) since my previous patch doesn't sit on top of base.c/ath5k.h anymore.
 * Update module version to 0.6.0

Changes-Licensed-under: ISC
Signed-Off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

 * Fix srev reporting during attach

Changes-Licensed-under: ISC
Signed-Off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

 * Use QUIET mechanism to drain tx buffer on PCU for newer chips
 * Make sure that INTPEND is really 1 and not 0xffffffff while checking for pending interrupts

Changes-Licensed-under: ISC
Signed-Off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

 * Use new SREV values and PHY srevs to identify radio type durring attach

Changes-Licensed-under: ISC
Signed-Off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

One of the spin-on-condition loops in routine do_dummy_tx always exits before
the condition is satisfied. The hardware might be left in an inconsistent
state that might be the cause of the PHY transmission errors seen by some
users.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

 * Update registers
 * Update SREV values and add some PHY srevs
 * Prepare ath5k.h for newer radios etc

 Thanks to Atheros 's HAL source we now know for sure how many parts we have
 and what their SREV values are. We also have some updates on registers. Prepare
 ath5k for some major updates ;-)

 My previous mail had 2 more patches following (git log misusage), sorry for double
 posting ;-(

Changes-Licensed-under: ISC
Signed-Off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

According to the newly-released Atheros HAL code, asserting the
TSF reset bit will toggle a hardware internal state, resulting in a
spurious reset on the next chip reset.  Whenever we force a TSF bit,
write the bit twice to clear the internal signal.
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

When CONFIG_MAC80211_MESH=n and CONFIG_MAC80211_NOINLINE=y,
gcc doesn't optimize out a call to ieee80211_rx_h_mesh_fwding,
even if the previous comparison is always false in this case.
This leads to the following errors during modpost:

ERROR: "mpp_path_lookup" [net/mac80211/mac80211.ko] undefined!
ERROR: "mpp_path_add" [net/mac80211/mac80211.ko] undefined!

Fix by removing the possibility of uninlining
ieee80211_rx_h_mesh_fwding rx handler.
Signed-off-by: Davide Pesavento <davidepesa@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Fix by disabling rt2x00 rfkill support when rt2x00 is built-in and rfkill has been modularized, and
a similar scheme for the relationship between leds_class and rt2x00..
Also, give a warning to the end-user when rfkill-/leds-support is disabled this way, so that the
end-user has at least some clues on what is going on.

Proper fixing required some general updates of the Kconfig-structure for the rt2x00 driver, whereby
internal configuration symbols had to be moved to after the user-visible configuration symbols.
Signed-off-by: Gertjan van Wingerde <gwingerde@kpnplanet.nl>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch addresses comments from Dan Williams about the patch
committed as "libertas: Improvements on automatic tx power control via
SIOCSIWTXPOW."
Signed-off-by: Anna Neal <anna@cozybit.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch removes wme_tx_queue and wme_rx_queue from struct sta_info
and from the debugfs sub-structure of struct sta_info
in net/mac80211/sta_info.h, as they are useless and not used.
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>