Michael Chan says:

====================
bnxt_en: Misc. small fixes.

Fixes include moving the initial function reset, notifying the RDMA driver
during tx timeout, setting dcbx_cap properly depending on whether the
firmware agent is running or not, and an autoneg related improvement.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In some situations, the firmware will return 0 for autoneg supported
speed.  This may happen if the firmware detects no SFP module, for
example.  The driver should ignore this so that we don't end up with
an invalid autoneg setting with nothing advertised.  When SFP module
is inserted, we'll get the updated settings from firmware at that time.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Set DCB_CAP_DCBX_HOST capability flag only if the firmware LLDP agent
is not running.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If we call bnxt_reset_task() due to tx timeout, we should call
bnxt_ulp_stop() to inform the RDMA driver about the error and the
impending reset.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The firmware call to do function reset is done too late.  It is causing
the rings that have been reserved to be freed.  In NPAR mode, this bug
is causing us to run out of rings.

Fixes: 391be5c2 ("bnxt_en: Implement new scheme to reserve tx rings.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Printing copyright does not give any useful information on the boot
process.
Furthermore, the email address printed is obsolete since
commit ba57b6f2 ("MAINTAINERS: fix bouncing tun/tap entries")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

KMSAN reports a use of uninitialized memory in put_cmsg() because
msg.msg_flags in recvfrom haven't been initialized properly.
The flag values don't affect the result on this path, but it's still a
good idea to initialize them explicitly.
Signed-off-by: Alexander Potapenko <glider@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
bpf: htab fixes

Two bpf hashtable fixes. See individual patches for details.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

when all map elements are pre-allocated one cpu can delete and reuse htab_elem
while another cpu is still walking the hlist. In such case the lookup may
miss the element. Convert hlist to hlist_nulls to avoid such scenario.
When bucket lock is taken there is no need to take such precautions,
so only convert map_lookup and map_get_next to nulls.
The race window is extremely small and only reproducible with explicit
udelay() inside lookup_nulls_elem_raw()

Similar to hlist add hlist_nulls_for_each_entry_safe() and
hlist_nulls_entry_safe() helpers.

Fixes: 6c905981 ("bpf: pre-allocate hash map elements")
Reported-by: Jonathan Perry <jonperry@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

when htab_elem is removed from the bucket list the htab_elem.hash_node.next
field should not be overridden too early otherwise we have a tiny race window
between lookup and delete.
The bug was discovered by manual code analysis and reproducible
only with explicit udelay() in lookup_elem_raw().

Fixes: 6c905981 ("bpf: pre-allocate hash map elements")
Reported-by: Jonathan Perry <jonperry@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace MAX_ADDR_LEN with its numeric value to fix the following
linux/packet_diag.h userspace compilation error:

/usr/include/linux/packet_diag.h:67:17: error: 'MAX_ADDR_LEN' undeclared here (not in a function)
  __u8 pdmc_addr[MAX_ADDR_LEN];

This is not the first case in the UAPI where the numeric value
of MAX_ADDR_LEN is used instead of symbolic one, uapi/linux/if_link.h
already does the same:

$ grep MAX_ADDR_LEN include/uapi/linux/if_link.h
	__u8 mac[32]; /* MAX_ADDR_LEN */

There are no UAPI headers besides these two that use MAX_ADDR_LEN.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Acked-by: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The gso code of several tunnels type (gre and udp tunnels)
takes for granted that the skb->inner_protocol is properly
initialized and drops the packet elsewhere.

On the forwarding path no one is initializing such field,
so gro encapsulated packets are dropped on forward.

Since commit 38720352 ("gre: Use inner_proto to obtain
inner header protocol"), this can be reproduced when the
encapsulated packets use gre as the tunneling protocol.

The issue happens also with vxlan and geneve tunnels since
commit 8bce6d7d ("udp: Generalize skb_udp_segment"), if the
forwarding host's ingress nic has h/w offload for such tunnel
and a vxlan/geneve device is configured on top of it, regardless
of the configured peer address and vni.

To address the issue, this change initialize the inner_protocol
field for encapsulated packets in both ipv4 and ipv6 gro complete
callbacks.

Fixes: 38720352 ("gre: Use inner_proto to obtain inner header protocol")
Fixes: 8bce6d7d ("udp: Generalize skb_udp_segment")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In qed_ll2_start_ooo() the ll2_info variable is uninitialized and then
passed to qed_ll2_acquire_connection() where it is copied into a new
memory space.

This shouldn't cause any issue as long as non of the copied memory is
every read.
But the potential for a bug being introduced by reading this memory
is real.

Detected by CoverityScan, CID#1399632 ("Uninitialized scalar variable")
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sunil Goutham says:

====================
net: thunderx: Miscellaneous fixes

This patch set fixes multiple issues such as IOMMU
translation faults when kernel is booted with IOMMU enabled
on host, incorrect MAC ID reading from ACPI tables and IPv6
UDP packet drop due to failure of checksum validation.

Changes from v1:
- As suggested by David Miller, got rid of conditional
  calling of DMA map/unmap APIs. Also updated commit message
  in 'IOMMU translation faults' patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Do not consider IPv6 frames with zero UDP checksum as frames
with bad checksum and drop them.
Signed-off-by: Thanneeru Srinivasulu <tsrinivasulu@cavium.com>
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When booted with ACPI, random mac addresses are being
assigned to node1 interfaces due to mismatch of bgx_id
in BGX driver and ACPI tables.

This patch fixes this issue by setting maximum BGX devices
per node based on platform/soc instead of a macro. This
change will set the bgx_id appropriately.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When BGX/LMACs are in QSGMII mode, for some LMACs, mode info is
not being printed. This patch will fix that. With changes already
done to not do any sort of serdes 2 lane mapping config calculation
in kernel driver, we can get rid of this logic.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ACPI support has been added to ARM IOMMU driver in 4.10 kernel
and that has resulted in VNIC interfaces throwing translation
faults when kernel is booted with ACPI as driver was not using
DMA API. This patch fixes the issue by using DMA API which inturn
will create translation tables when IOMMU is enabled.

Also VNIC doesn't have a seperate receive buffer ring per receive
queue, so there is no 1:1 descriptor index matching between CQE_RX
and the index in buffer ring from where a buffer has been used for
DMA'ing. Unlike other NICs, here it's not possible to maintain dma
address to virt address mappings within the driver. This leaves us
no other choice but to use IOMMU's IOVA address conversion API to
get buffer's virtual address which can be given to network stack
for processing.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the function rds_ib_setup_qp, the error handle is missing. When some
error occurs, it is possible that memory leak occurs. As such, error
handle is added.

Cc: Joe Jin <joe.jin@oracle.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Guanglei Li <guanglei.li@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Improve UDP TX performance by:
* reducing the ring size from 2K to 512
* replacing the numerous streaming DMA allocations for info buffers and
  gather lists with one large consistent DMA allocation per ring

BQL is not effective here.  We reduced the ring size because there is heavy
overhead with dma_map_single every so often.  With iommu=on, dma_map_single
in PF Tx data path was taking longer time (~700usec) for every ~250
packets.  Debugged intel_iommu code, and found that PF driver is utilizing
too many static IO virtual address mapping entries (for gather list entries
and info buffers): about 100K entries for two PF's each using 8 rings.
Also, finding an empty entry (in rbtree of device domain's iova mapping in
kernel) during Tx path becomes a bottleneck every so often; the loop to
find the empty entry goes through over 40K iterations; this is too costly
and was the major overhead.  Overhead is low when this loop quits quickly.

Netperf benchmark numbers before and after patch:

PF UDP TX
+--------+--------+------------+------------+---------+
|        |        |  Before    |  After     |         |
| Number |        |  Patch     |  Patch     |         |
|  of    | Packet | Throughput | Throughput | Percent |
| Flows  |  Size  |  (Gbps)    |  (Gbps)    | Change  |
+--------+--------+------------+------------+---------+
|        |   360  |   0.52     |   0.93     |  +78.9  |
|   1    |  1024  |   1.62     |   2.84     |  +75.3  |
|        |  1518  |   2.44     |   4.21     |  +72.5  |
+--------+--------+------------+------------+---------+
|        |   360  |   0.45     |   1.59     | +253.3  |
|   4    |  1024  |   1.34     |   5.48     | +308.9  |
|        |  1518  |   2.27     |   8.31     | +266.1  |
+--------+--------+------------+------------+---------+
|        |   360  |   0.40     |   1.61     | +302.5  |
|   8    |  1024  |   1.64     |   4.24     | +158.5  |
|        |  1518  |   2.87     |   6.52     | +127.2  |
+--------+--------+------------+------------+---------+

VF UDP TX
+--------+--------+------------+------------+---------+
|        |        |  Before    |  After     |         |
| Number |        |  Patch     |  Patch     |         |
|  of    | Packet | Throughput | Throughput | Percent |
| Flows  |  Size  |  (Gbps)    |  (Gbps)    | Change  |
+--------+--------+------------+------------+---------+
|        |   360  |   1.28     |   1.49     |  +16.4  |
|   1    |  1024  |   4.44     |   4.39     |   -1.1  |
|        |  1518  |   6.08     |   6.51     |   +7.1  |
+--------+--------+------------+------------+---------+
|        |   360  |   2.35     |   2.35     |    0.0  |
|   4    |  1024  |   6.41     |   8.07     |  +25.9  |
|        |  1518  |   9.56     |   9.54     |   -0.2  |
+--------+--------+------------+------------+---------+
|        |   360  |   3.41     |   3.65     |   +7.0  |
|   8    |  1024  |   9.35     |   9.34     |   -0.1  |
|        |  1518  |   9.56     |   9.57     |   +0.1  |
+--------+--------+------------+------------+---------+
Signed-off-by: VSR Burru <veerasenareddy.burru@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Dinesh reported that RTA_MULTIPATH nexthops are 8-bytes larger with IPv6
than IPv4. The recent refactoring for multipath support in netlink
messages does discriminate between non-multipath which needs the OIF
and multipath which adds a rtnexthop struct for each hop making the
RTA_OIF attribute redundant. Resolve by adding a flag to the info
function to skip the oif for multipath.

Fixes: beb1afac ("net: ipv6: Add support to dump multipath routes
       via RTA_MULTIPATH attribute")
Reported-by: Dinesh Dutt <ddutt@cumulusnetworks.com>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This warnings may be hit even in case they should not - in case user
puts a TC-flower rule which failed to be offloaded. So just remove them.
Reported-by: Petr Machata <petrm@mellanox.com>
Reported-by: Ido Schimmel <idosch@mellanox.com>
Fixes: commit 7aa0f5aa ("mlxsw: spectrum: Implement TC flower offload")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

KASAN detected a use-after-free:

[  269.467067] BUG: KASAN: use-after-free in vrf_xmit+0x7f1/0x827 [vrf] at addr ffff8800350a21c0
[  269.467067] Read of size 4 by task ssh/1879
[  269.467067] CPU: 1 PID: 1879 Comm: ssh Not tainted 4.10.0+ #249
[  269.467067] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[  269.467067] Call Trace:
[  269.467067]  dump_stack+0x81/0xb6
[  269.467067]  kasan_object_err+0x21/0x78
[  269.467067]  kasan_report+0x2f7/0x450
[  269.467067]  ? vrf_xmit+0x7f1/0x827 [vrf]
[  269.467067]  ? ip_output+0xa4/0xdb
[  269.467067]  __asan_load4+0x6b/0x6d
[  269.467067]  vrf_xmit+0x7f1/0x827 [vrf]
...

Which corresponds to the skb access after xmit handling. Fix by saving
skb->len and using the saved value to update stats.

Fixes: 193125db ("net: Introduce VRF device driver")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This restores the ability to set a team device's mtu to anything higher
than 1500. Similar to the reported issue with bonding, the team driver
calls ether_setup(), which sets an initial max_mtu of 1500, while the
underlying hardware can handle something much larger. Just set it to
ETH_MAX_MTU to support all possible values, and the limitations of the
underlying devices will prevent setting anything too large.

Fixes: 91572088 ("net: use core MTU range checking in core net infra")
CC: Cong Wang <xiyou.wangcong@gmail.com>
CC: Jiri Pirko <jiri@resnulli.us>
CC: netdev@vger.kernel.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Those were supposed to go into the net-next tree not
the net tree.  Oops...
Signed-off-by: David S. Miller <davem@davemloft.net>

Julian Margetson reported a panic on his SAM460EX with Kernel 4.11-rc1:
| Unable to handle kernel paging request for data at address 0x00000014
| Oops: Kernel access of bad area, sig: 11 [#1]
| PREEMPT
| Canyonlands
| Modules linked in:
| CPU: 0 PID: 1 Comm: swapper Not tainted [...]
| task: ea838000 task.stack: ea836000
| NIP: c0599f5c LR: c0599dd8 CTR: 00000000
| REGS: ea837c80 TRAP: 0300   Not tainted [...]
| MSR: 00029000 <CE,EE,ME>
|  CR: 24371242  XER: 20000000
| DEAR: 00000014 ESR: 00000000
| GPR00: c0599ce8 ea837d30 ea838000 c0e52dcc c0d56ffb [...]
| NIP [c0599f5c] emac_probe+0xfb4/0x1304
| LR [c0599dd8] emac_probe+0xe30/0x1304
| Call Trace:
| [ea837d30] [c0599ce8] emac_probe+0xd40/0x1304 (unreliable)
| [ea837d80] [c0533504] platform_drv_probe+0x48/0x90
| [ea837da0] [c0531c14] driver_probe_device+0x15c/0x2c4
| [ea837dd0] [c0531e04] __driver_attach+0x88/0xb0
| ---[ end trace ... ]---

The problem is caused by emac_dt_phy_probe() returing success (0)
for existing device-trees configurations that do not specify a
"phy-handle" property. This caused the code to skip the existing
phy probe and setup. Which led to essential phy related
data-structures being uninitialized.

This patch also removes the unused variable in emac_dt_phy_connect().

Fixes: a577ca6b ("net: emac: add support for device-tree based PHY discovery and setup")
Reported-by: Julian Margetson <runaway@candw.ms>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

As I don't have the hardware, I'd be very pleased if
someone may test this patch.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

As I don't have the hardware, I'd be very pleased if
someone may test this patch.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Tested-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

As I don't have the hardware, I'd be very pleased if
someone may test this patch.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

As I don't have the hardware, I'd be very pleased if
someone may test this patch.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

As I don't have the hardware, I'd be very pleased if
someone may test this patch.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

As I don't have the hardware, I'd be very pleased if
someone may test this patch.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

As I don't have the hardware, I'd be very pleased if
someone may test this patch.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

As I don't have the hardware, I'd be very pleased if
someone may test this patch.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
pull request (net): ipsec 2017-03-06

1) Fix lockdep splat on xfrm policy subsystem initialization.
   From Florian Westphal.

2) When using socket policies on IPv4-mapped IPv6 addresses,
   we access the flow informations of the wrong address family
   what leads to an out of bounds access. Fix this by using
   the family we get with the dst_entry, like we do it for the
   standard policy lookup.

3) vti6 can report a PMTU below IPV6_MIN_MTU. Fix this by
   adding a check for that before sending a ICMPV6_PKT_TOOBIG
   message.

Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Andrey reported the following kernel crash:

kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
   (ftrace buffer empty)
Modules linked in:
CPU: 0 PID: 14446 Comm: syz-executor6 Not tainted 4.10.0+ #82
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
task: ffff88001f311700 task.stack: ffff88001f6e8000
RIP: 0010:ip6mr_sk_done+0x15a/0x3d0 net/ipv6/ip6mr.c:1618
RSP: 0018:ffff88001f6ef418 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 1ffff10003edde8c RCX: ffffc900043ee000
RDX: 0000000000000004 RSI: ffffffff83e3b3f8 RDI: 0000000000000020
RBP: ffff88001f6ef508 R08: fffffbfff0dcc5d8 R09: 0000000000000000
R10: ffffffff86e62ec0 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: ffff88001f6ef4e0 R15: ffff8800380a0040
FS:  00007f7a52cec700(0000) GS:ffff88003ec00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000061c500 CR3: 000000001f1ae000 CR4: 00000000000006f0
DR0: 0000000020000000 DR1: 0000000020000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600
Call Trace:
 rawv6_close+0x4c/0x80 net/ipv6/raw.c:1217
 inet_release+0xed/0x1c0 net/ipv4/af_inet.c:425
 inet6_release+0x50/0x70 net/ipv6/af_inet6.c:432
 sock_release+0x8d/0x1e0 net/socket.c:597
 __sock_create+0x39d/0x880 net/socket.c:1226
 sock_create_kern+0x3f/0x50 net/socket.c:1243
 inet_ctl_sock_create+0xbb/0x280 net/ipv4/af_inet.c:1526
 icmpv6_sk_init+0x163/0x500 net/ipv6/icmp.c:954
 ops_init+0x10a/0x550 net/core/net_namespace.c:115
 setup_net+0x261/0x660 net/core/net_namespace.c:291
 copy_net_ns+0x27e/0x540 net/core/net_namespace.c:396
9pnet_virtio: no channels available for device ./file1
 create_new_namespaces+0x437/0x9b0 kernel/nsproxy.c:106
 unshare_nsproxy_namespaces+0xae/0x1e0 kernel/nsproxy.c:205
 SYSC_unshare kernel/fork.c:2281 [inline]
 SyS_unshare+0x64e/0x1000 kernel/fork.c:2231
 entry_SYSCALL_64_fastpath+0x1f/0xc2

This is because net->ipv6.mr6_tables is not initialized at that point,
ip6mr_rules_init() is not called yet, therefore on the error path when
we iterator the list, we trigger this oops. Fix this by reordering
ip6mr_rules_init() before icmpv6_sk_init().
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Dmitry reported crashes in DCCP stack [1]

Problem here is that when I got rid of listener spinlock, I missed the
fact that DCCP stores a complex state in struct dccp_request_sock,
while TCP does not.

Since multiple cpus could access it at the same time, we need to add
protection.

[1]
BUG: KASAN: use-after-free in dccp_feat_activate_values+0x967/0xab0
net/dccp/feat.c:1541 at addr ffff88003713be68
Read of size 8 by task syz-executor2/8457
CPU: 2 PID: 8457 Comm: syz-executor2 Not tainted 4.10.0-rc7+ #127
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:15 [inline]
 dump_stack+0x292/0x398 lib/dump_stack.c:51
 kasan_object_err+0x1c/0x70 mm/kasan/report.c:162
 print_address_description mm/kasan/report.c:200 [inline]
 kasan_report_error mm/kasan/report.c:289 [inline]
 kasan_report.part.1+0x20e/0x4e0 mm/kasan/report.c:311
 kasan_report mm/kasan/report.c:332 [inline]
 __asan_report_load8_noabort+0x29/0x30 mm/kasan/report.c:332
 dccp_feat_activate_values+0x967/0xab0 net/dccp/feat.c:1541
 dccp_create_openreq_child+0x464/0x610 net/dccp/minisocks.c:121
 dccp_v6_request_recv_sock+0x1f6/0x1960 net/dccp/ipv6.c:457
 dccp_check_req+0x335/0x5a0 net/dccp/minisocks.c:186
 dccp_v6_rcv+0x69e/0x1d00 net/dccp/ipv6.c:711
 ip6_input_finish+0x46d/0x17a0 net/ipv6/ip6_input.c:279
 NF_HOOK include/linux/netfilter.h:257 [inline]
 ip6_input+0xdb/0x590 net/ipv6/ip6_input.c:322
 dst_input include/net/dst.h:507 [inline]
 ip6_rcv_finish+0x289/0x890 net/ipv6/ip6_input.c:69
 NF_HOOK include/linux/netfilter.h:257 [inline]
 ipv6_rcv+0x12ec/0x23d0 net/ipv6/ip6_input.c:203
 __netif_receive_skb_core+0x1ae5/0x3400 net/core/dev.c:4190
 __netif_receive_skb+0x2a/0x170 net/core/dev.c:4228
 process_backlog+0xe5/0x6c0 net/core/dev.c:4839
 napi_poll net/core/dev.c:5202 [inline]
 net_rx_action+0xe70/0x1900 net/core/dev.c:5267
 __do_softirq+0x2fb/0xb7d kernel/softirq.c:284
 do_softirq_own_stack+0x1c/0x30 arch/x86/entry/entry_64.S:902
 </IRQ>
 do_softirq.part.17+0x1e8/0x230 kernel/softirq.c:328
 do_softirq kernel/softirq.c:176 [inline]
 __local_bh_enable_ip+0x1f2/0x200 kernel/softirq.c:181
 local_bh_enable include/linux/bottom_half.h:31 [inline]
 rcu_read_unlock_bh include/linux/rcupdate.h:971 [inline]
 ip6_finish_output2+0xbb0/0x23d0 net/ipv6/ip6_output.c:123
 ip6_finish_output+0x302/0x960 net/ipv6/ip6_output.c:148
 NF_HOOK_COND include/linux/netfilter.h:246 [inline]
 ip6_output+0x1cb/0x8d0 net/ipv6/ip6_output.c:162
 ip6_xmit+0xcdf/0x20d0 include/net/dst.h:501
 inet6_csk_xmit+0x320/0x5f0 net/ipv6/inet6_connection_sock.c:179
 dccp_transmit_skb+0xb09/0x1120 net/dccp/output.c:141
 dccp_xmit_packet+0x215/0x760 net/dccp/output.c:280
 dccp_write_xmit+0x168/0x1d0 net/dccp/output.c:362
 dccp_sendmsg+0x79c/0xb10 net/dccp/proto.c:796
 inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:744
 sock_sendmsg_nosec net/socket.c:635 [inline]
 sock_sendmsg+0xca/0x110 net/socket.c:645
 SYSC_sendto+0x660/0x810 net/socket.c:1687
 SyS_sendto+0x40/0x50 net/socket.c:1655
 entry_SYSCALL_64_fastpath+0x1f/0xc2
RIP: 0033:0x4458b9
RSP: 002b:00007f8ceb77bb58 EFLAGS: 00000282 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000017 RCX: 00000000004458b9
RDX: 0000000000000023 RSI: 0000000020e60000 RDI: 0000000000000017
RBP: 00000000006e1b90 R08: 00000000200f9fe1 R09: 0000000000000020
R10: 0000000000008010 R11: 0000000000000282 R12: 00000000007080a8
R13: 0000000000000000 R14: 00007f8ceb77c9c0 R15: 00007f8ceb77c700
Object at ffff88003713be50, in cache kmalloc-64 size: 64
Allocated:
PID = 8446
 save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:57
 save_stack+0x43/0xd0 mm/kasan/kasan.c:502
 set_track mm/kasan/kasan.c:514 [inline]
 kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:605
 kmem_cache_alloc_trace+0x82/0x270 mm/slub.c:2738
 kmalloc include/linux/slab.h:490 [inline]
 dccp_feat_entry_new+0x214/0x410 net/dccp/feat.c:467
 dccp_feat_push_change+0x38/0x220 net/dccp/feat.c:487
 __feat_register_sp+0x223/0x2f0 net/dccp/feat.c:741
 dccp_feat_propagate_ccid+0x22b/0x2b0 net/dccp/feat.c:949
 dccp_feat_server_ccid_dependencies+0x1b3/0x250 net/dccp/feat.c:1012
 dccp_make_response+0x1f1/0xc90 net/dccp/output.c:423
 dccp_v6_send_response+0x4ec/0xc20 net/dccp/ipv6.c:217
 dccp_v6_conn_request+0xaba/0x11b0 net/dccp/ipv6.c:377
 dccp_rcv_state_process+0x51e/0x1650 net/dccp/input.c:606
 dccp_v6_do_rcv+0x213/0x350 net/dccp/ipv6.c:632
 sk_backlog_rcv include/net/sock.h:893 [inline]
 __sk_receive_skb+0x36f/0xcc0 net/core/sock.c:479
 dccp_v6_rcv+0xba5/0x1d00 net/dccp/ipv6.c:742
 ip6_input_finish+0x46d/0x17a0 net/ipv6/ip6_input.c:279
 NF_HOOK include/linux/netfilter.h:257 [inline]
 ip6_input+0xdb/0x590 net/ipv6/ip6_input.c:322
 dst_input include/net/dst.h:507 [inline]
 ip6_rcv_finish+0x289/0x890 net/ipv6/ip6_input.c:69
 NF_HOOK include/linux/netfilter.h:257 [inline]
 ipv6_rcv+0x12ec/0x23d0 net/ipv6/ip6_input.c:203
 __netif_receive_skb_core+0x1ae5/0x3400 net/core/dev.c:4190
 __netif_receive_skb+0x2a/0x170 net/core/dev.c:4228
 process_backlog+0xe5/0x6c0 net/core/dev.c:4839
 napi_poll net/core/dev.c:5202 [inline]
 net_rx_action+0xe70/0x1900 net/core/dev.c:5267
 __do_softirq+0x2fb/0xb7d kernel/softirq.c:284
Freed:
PID = 15
 save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:57
 save_stack+0x43/0xd0 mm/kasan/kasan.c:502
 set_track mm/kasan/kasan.c:514 [inline]
 kasan_slab_free+0x73/0xc0 mm/kasan/kasan.c:578
 slab_free_hook mm/slub.c:1355 [inline]
 slab_free_freelist_hook mm/slub.c:1377 [inline]
 slab_free mm/slub.c:2954 [inline]
 kfree+0xe8/0x2b0 mm/slub.c:3874
 dccp_feat_entry_destructor.part.4+0x48/0x60 net/dccp/feat.c:418
 dccp_feat_entry_destructor net/dccp/feat.c:416 [inline]
 dccp_feat_list_pop net/dccp/feat.c:541 [inline]
 dccp_feat_activate_values+0x57f/0xab0 net/dccp/feat.c:1543
 dccp_create_openreq_child+0x464/0x610 net/dccp/minisocks.c:121
 dccp_v6_request_recv_sock+0x1f6/0x1960 net/dccp/ipv6.c:457
 dccp_check_req+0x335/0x5a0 net/dccp/minisocks.c:186
 dccp_v6_rcv+0x69e/0x1d00 net/dccp/ipv6.c:711
 ip6_input_finish+0x46d/0x17a0 net/ipv6/ip6_input.c:279
 NF_HOOK include/linux/netfilter.h:257 [inline]
 ip6_input+0xdb/0x590 net/ipv6/ip6_input.c:322
 dst_input include/net/dst.h:507 [inline]
 ip6_rcv_finish+0x289/0x890 net/ipv6/ip6_input.c:69
 NF_HOOK include/linux/netfilter.h:257 [inline]
 ipv6_rcv+0x12ec/0x23d0 net/ipv6/ip6_input.c:203
 __netif_receive_skb_core+0x1ae5/0x3400 net/core/dev.c:4190
 __netif_receive_skb+0x2a/0x170 net/core/dev.c:4228
 process_backlog+0xe5/0x6c0 net/core/dev.c:4839
 napi_poll net/core/dev.c:5202 [inline]
 net_rx_action+0xe70/0x1900 net/core/dev.c:5267
 __do_softirq+0x2fb/0xb7d kernel/softirq.c:284
Memory state around the buggy address:
 ffff88003713bd00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff88003713bd80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88003713be00: fc fc fc fc fc fc fc fc fc fc fb fb fb fb fb fb
                                                          ^

Fixes: 079096f1 ("tcp/dccp: install syn_recv requests into ehash table")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The amount of TX/RX buffers that the vNIC driver currently allocates
is different from the amount agreed upon in negotiation with firmware.
Correct that by allocating the requested number of buffers confirmed
by firmware.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use a counter to track the number of outstanding transmissions sent
that have not received completions. If the counter reaches the maximum
number of queue entries, stop transmissions on that queue. As we receive
more completions from firmware, wake the queue once the counter reaches
an acceptable level.

This patch prevents hardware/firmware TX queue from filling up and
and generating errors.  Since incorporating this fix, internal testing
has reported that these firmware errors have stopped.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>